Problem guest network

Similar Questions

• Why can't I configure guest network?

  TV, telephone and Internet are brought home through fiber TDS and distributed to households through ethernet.

  Actiontec modem/router (Model T 2200 H of TDS), is connected via LAN to my Airport Extreme (model HE ME918 / bought 08/09/15), and the primary network works fine.

  Recently, I tried to set up a network of comments and set up a name and a password. iPad, laptop or phone unable to connect to the Guest network.

  I have not noticed any IP address, subnet mask, router, DNS and search domains in the boxes associated with the network of comments.

  Is the router "does not fully with Airport Extreme" or something else.

  TDS is very focused on the PC and I found even any reference in section helps the router that they issued me so I'm not very confident that they will be a lot of help.

  Thank you in advance for any help posted here.

  Why can not put in place a network of comments?

  You have an Actiontec modem/router...and that you need a simple modem... If you want the function of feedback network works on the AirPort Extreme.

  When AirPort Extreme "sees" another router on the network, it is configured in Bridge Mode in order to avoid a situation where you have two routers on the same network, the two try to act as routers. That will produce any IP address conflicts and another called problem Double NAT... you do not want on your network.

  Unfortunately, the AirPort Extreme network comments feature won't work correctly when the AirPort Extreme in Bridge Mode.

  If Actiontec modem/router can be configured to operate as a simple modem.. .not one router... so the network comments feature will work correctly on the AirPort Extreme. Check with your provider to see if this could be a possibility.

• MAC filtering with guest network

  Hello, I have E4200v2 of Cisco, and after someone hacked password of my router, I was forced to activate a white list of MAC filtering. Problem is that I also like to activate a network of comments so my small business clients could still connect to the wifi, without acceding to out to home PC (and drink our bandwidth).

  Is this possible? Thank you.

  1. make sure that disable WPS.

  2 change the router password on the Administration page to guarantee something.

  3 make sure to disable remote management.

  4. set WPA2 Personal with a new strong password.

  5 disable the feedback network.

  That will protect your network. Piracy is not possible unless someone passes the WPA2 password or have access to the router and ethernet ports.

  The MAC filter won't help you. MAC addresses are transferred, are easily picked up and not cloned.

  If you want to activate the guest network you must accept the fact that other computers connect to your guest network and try to access the internet from there. They manage unless they know the password, but still, they can connect to the guest network because it is not protected. Only access from the network invited to the internet is protected.

  He must also accept the fact that you can "drink your bandwidth. If you do not like who don't offer guest access.

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• How is "Guest network" differs from the main network?

  I just purchased and installed a refurbished Airport Express. Everything works fine. In the installation program, it gave me the opportunity to create a network of comments, which I did and it works. My question: How is this different guest network from my main network?

  "Guests" that connect to the network comments can only access the Internet.  They cannot "see" devices on your main or private network.

  So if you want to not "invited" to see your personal devices and possibly see your private data on your computer or computers on your private network... or... you don't want to give "guest" password to your network private... it makes sense to leave the 'invited' to use the guest network.

• Guest network: ESET detects open network

  A parent has an EA6400. It has established its guest access. A guest the latter using an Android with ESET security phone received the following message:

  

  Security risk

  Connected to 'XXPrivateXX-comments '.

  Open network

  ESET recommends:

  Connecting to public Wi - Fi networks without encryption, your data can be easily captured by the eavesdroppers. Watch by accessing or submitting sensitive information over public networks without encryption application.

  Its 2.4 GHz and 5 GHz both have security mode WPA2-Personal. The router is password protected.

  Why the Android with ESET phone give the message in bold above? And what can we do?

  Hi, KStecyk. The guest network on the router Linksys EA6400 seems to be an open network, it doesn't have a lock on it, and he just allows you to connect automatically. However, once you connect to your phone's browser, it will ask you to type the password for comments before connect you to the internet. So it is always a secure network. You can check this link for the FAQ of the guest network: http://www.linksys.com/gb/support-article?articleNum=140727#q1

  Jay-15354

  Linksys technical support

• EA3500 - access guest network

  Help! Took me 10 years to get another router wireless home, because last time, it was fixed and people were practically parking in my driveway to use. In any case, I have a network of comments - without warranty. How the hell change it secure, or eliminate all guest network together?

  Great Jake. Thanks for the help!

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired. "Please wait a few minutes by trying again.

  Original title: store Windows and Microsoft Services does not

  I tried for awhile to update to Windows 8.1, and whenever I open the Windows store, I get the following message:

  "We could not connect to the Bank.  This could have happened due to a server problem or network connection has expired.  Please wait a few minutes by try again. »

  I looked through a large number of subjects and lived simple solutions, like check that the time is correctly synchronized and clear the memory cache to store.

  Just today, I found another solution posted, to make my computer trusts.  To do this, I had to connect my local account to my microsoft account, I tried to do, only to be met with the following message:

  "Sorry, we could not connect to the Microsoft services right now.  If the problem persists, look for "referee" in the start screen. »

  I did the research you suggested, and nothing came.  When I watched this show online, I found the idea of creating a new user account, which has been received with the same question.  The suggestion of other involved running a diagnostic tool for Microsoft account who investigated the issue, which has turned a few 'problems found', namely an Unfixed 'Problems with the strategy of Microsoft account' and a Detected "Rootcauses found and created newspapers", but this is not what that means, or how to solve.

  In addition, some of the suggested solutions were an antivirus program, but I do not have a third part of the installed antivirus program.

  Any help is appreciated, because I really want to solve this problem.

  I had this problem too. Here is how I fixed it in about 3 seconds.

  1.) by scanning in the right and type "WSReset.exe" (without the quotes) in the search bar.

  2.) click on the application that appears. It will look like a Windows Store icon.

  BAM... done. I hope this helps!

• We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422).

  OT: Problems with Microsoft Store for a computer in windows 8.

  It keeps saying we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. (0 x 80070422). Please help me thanks

  Hello

  Try the steps mentioned here and see if that helps:

  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1

  If the problem persists, try to create a new user account.

  Hope this helps, good luck :)

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired

  Original title: Store of Windows 8

  I got the message to upgrade to windows 8.1. When click to upgrade it shows following message.

  "We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please, wait a few minutes and try again"

  The error message appeared as early as February 2014, so I can't update windows 8.1 or go to store.

  Hi Rikas,

  You might face this problem if the proxy connections are enabled.  Cache clearing Windows Store is also known to solve the problem.

  Kindly, follow these methods and check if that helps.

  Method 1: Follow these steps to disable the proxy settings.

  a. open Internet Explorer to the desktop.

  "(b) click on the" "Tools button", then click on "Internet Options".

  "c. click on the" "connections ' tab and then click on"parameters LAN '.

  d. uncheck use 'Proxy Server '. .

  "e. click on" "Apply" and "okay ' to save the changes.

  In addition, run the troubleshooter app and check.

  This tool can automatically identify and fix some issues with the store.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  
  Method 2:
  Reset Windows store the cache and check if that helps.

  a. press on 'Windows and R ' key to open the Run dialog box. "

  b. Type "'WSReset.exe ' and press enter."

  In addition, follow the suggestions of this blog.
  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro)

  http://blogs.technet.com/b/dennis_schnell/archive/2013/10/26/cannot-connect-to-Windows-store-Windows-8-1-8-RT-and-Pro.aspx

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• Problems with networking

  Hello

  We have a vmware infrastructure still in version 4 on a HP Blade Center works for a few years without problem.

  However, 2 days ago, we noticed the VMS has been very slow. We have reduced the problem of network connectivity, even if we do not find what is the problem.

  On VMS, if we try to ping another server (inside or outside the confines of the blade), it loses a large number of pings. Ping by the ESX host everything well without loss of ping.

  This happens on all esx servers 4.

  On the other servers blades on the same box (blades not with hypervisor installed), we don't see any problems, and they work very well. The affected only blades are the esx servers.

  No changes were made to the environment that could have an impact on the virtualization servers, nor there was any firmware update, patch or sw in this infrastructure.

  Do you have any suggestions on what this could be and how to perform troubleshooting on this issue?

  Thank you and best regards,

  Hi all

  Thank you for your help. We have already identified the problem. It was a problem with the switches on the blade case. Raise them solved the problem.

  Kind regards

• Network on the VMS problem guests on nested Hyper-V on ESXi 5.5

  Nesting of virtualization is already complicated, now, I hope that my subject of this discussion is not too complicated.

  Server: Dell PowerEdge R730 double E2640

  • External hypervisor: ESXi 5.5.0u2 (Dell custom image, installed on the server), 4 (NIC0, NIC1 in use) network interface cards
    • Management IP address 10.200.200.9/ subnet mask: 255.255.255.0 / Gateway: 10.200.200.1
  • Inner hypervisor: Windows Server 2012 R2 Datacenter, using 2 network cards virtual x E1000E
    • IP 10.200.200.10 (for BONES)
    • IP 10.200.200.11 (for guest virtual machines)

  
  

  Basically, I followed the instructions to create a new virtual machine with Virtual hardware version 10, edit the vmx file, allocate and reserve the 64 GB of RAM with 8 vCPU for Windows Server,

  VHV. Enable = "TRUE".

  Hypervisor.CPUID.v0 = "FALSE".

  MCE. Enable = "TRUE".

  At this point, everything works fine- I am able to install the Windows server 2012 R2 with Hyper-V feature. I also installed VMware Tools on this 2012 Windows Hyper-V, datacenter arrived at the field, ran iSCSI to connect to our NAS and restarted the hyper-V without problem on ESXi.

  
  
  

  But when I try to install a new guest VM in Hyper-V, the network does not work properly.

  I install a Windows Standard 2012 on Hyper-V (the inner hypervisor) without problem and the guest that OS Gets a 10.200.200.86 IP address (assigned by DHCP on the same subnet)

  This guest operating system, I am able to ping it's computer Hyper-V host 1st layer (10.200.200.10 and 10.200.200.11) and 2nd ESXi host (10.200.200.9), but the impossibility of joining as a result of gateway (10.200.200.1).
  

  And of course, I received an exclamation sign on the network icon in the taskbar of the 2012 Windows standard saying 'no internet connection '.

  * I was always able to join this Windows 2012 Std comments to the domain.

  No existingon the same subnet is an another Hyper-V on server physical hosting multiple virtual machines of comments including the controller of field and the DHCP servers, etc.

  
  

  I tried using PCIe with the Dell Server NIC3 pass through, but it crashed the ESXi and gave me an IERR (CPU 1 error) error message on my screen front of server Dell

  I ended up not using pass-through PCIe (although I really want to use if this solves my problem), because I learned that it can cause problems with other discussion threads Intel processors.

  Also, does anyone have similar problems? What did you do to fix this? I have been stuck for days not being is not able to connect guest VM in internet...

  My goals for this configuration are

  (1) simplify my strategy of VM backup (backup only the Hyper-V 2012 to capture all the parameters of the virtual machine)

  (2) maintain the real guest VMs on the NAS.

  (3) use this new Hyper-V with another Hyper-V (on another old physical server, are not nested) to provide high availability

  Andrew

  You have activated the Promiscuous Mode on your ESXi host vSphere vSwitch? Have a look here: http://vblog.is/?p=94

• 4 x WAP4410N VLAN for guest network

  Hi there everyone,

  You want to have a problem of my resolved.  I am running 4 x WAP4410N access points configured with one corporate ssid with WPA2 Enterprise authentication that points to a server in network access protection.  What I'm trying to do is to add a second ssid to all my points of access for guests only and cannot connect to the departmental resources/devices.  I think I have to VLAN so that it works correctly.

  Four access points in various parts of the building are connected and are wired in different switches SG300.  A port on a SG300-52 in my server room is plugged into a port on my firewall that I would use for DHCP.

  What should I do to get this working correctly?  At the time of my comments to test network is not even give an IP address to the devices, which I think is related to the VLAN.

  I do not know what ports I leave the identified tag-no, how to configure the VLANs on multiple switches, etc.  Any help would be appreciated.  It was suggested to me that I could use dedicated to guest access separate access points, but I like to keep the amount of access points down to the minimum required.

  I think you may have found the problem. I apologize I have not asked if you were on layer 2. I would have thought it.

  If they all Layer 3, maybe you could just add a few routes? Switching is not my field stronger.

  Personally as needed I just don't sleep 2 and use VLANs

  Eric

• WAP321 captive portal - impossible to set up the guest network connection

  Hello community.

  I use two WAP321 with the latest Firmware (1.0.6.2) in a cluster.

  Both are connected to a switch SG300-10 (FW: 1.4.1.3) in Mode of L3.

  The switch is connected to a router RV130 (FW: 1.0.2.7).

  The router has Inter-VLAN-routing active and static routes for my VLANS configured.

  To one of the Interfaces of the router is a connected DNS/DHCP server that manages the resolution of names and the dynamic distribution of IP4 for my network.

  In my network, I have different VLAN for customers, management, server, test and the WLAN clients.

  So far so good.

  I have install on the WAP321 cluster, an intern (VAP0) and a guest WLAN (VAP1) using the Setup Wizard.

  Delivery of DHCP and DNS lookups are ok for two wireless LANs.

  Settings WAP VLAN and IP4 address are:

  -untagged VLAN: enabled

  -untagged VLAN ID: e.g. 3

  -Management VLAN ID: the same without tag VLAN ID

  -IPv4 parameters are static in the ip range of the VLAN untagged

  -DNS server are set to manual for a server in VLAN 4 and to 8.8.8.8

  My problem is that I can connect to the WLAN comments but I never get the captive portal login screen.

  The First-Instance Association captive portal is set to VAP1.

  The Configuration of the Instance in captivity 'Vérification' is located in the local.

  A group and users are configured.

  The customer obtain an IP address in the host IP address range VLAN and can search names and IPS, e.g. www.cisco.com.

  If I try to open a Web site, and then I get the message that the server did not respond.

  Impatience on your part.

  Best regards

  Rainer.

  That's great. I'm glad to hear that.

  Eric Moyers