Problem in creating a new user in CC & B demo

Similar Questions

• Create a new user account takes computer problems?

  I had a computer guy clean virus I had and upgrade me to Windows 8, but now I have adware runs in the background and am getting kicked out of my programs.  Another type of computer I was just create a new user account - will that help?  Will I always the same questions?

  Hi Sqrlr,

  My apologies for the misunderstanding. :)

  If you have some kind of virus/malware, I would recommend running a full scan of your computer to get rid of it.  If necessary, you can use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/how-to-remove-adware/ef77d369-e38e-4a63-8966-025ddea85be2

  I hope this helps!

• Cannot create a new user account

  Hello and good evening,

  I have a laptop HP Pavilion I've had for about a month. I was creating a HP recovery disk. As I didn't have the right amount of available disks, I cancelled it. The next time I went to do the same thing, there was a message in the HP support assistant saying that the recovery disk was no longer available.  So I created an image of the system in case I ever needed to recover my OS. It was stored on drive C. I copied and pasted into the recovery d drive [I don't know if you can do].

  Anyway, some things have changed after I created the image of the system. The C: disk OS folder has been renamed Windows C:.

  I felt a little uncomfortable about the whole, so I thought that I create another user account. Hoping that this would also restore my HP Recovery disk.

  In any case, I went to do this and all seems to be OK, install applications and so on, until he came to a blue screen that says "Please wait". He remained on the screen for about 2 hours, after which the battery was flat. I repowered it and he started upward. He returned the same screen. I took the battery and plugged a USB based recovery disk. This led me to the Welcome screen, and I could log into my original user account.

  I'm not game to try again to create another user account in case something terrible happens and it does not restart.

  What should I do?

  1. create another user account give back me my recovery drive originalHP?

  2 could have another go to make him a corruption on my hard drive?

  I don't know if it's an HP or a problem of Windows 8, so I posted both.

  I hope someone can help

  Chris

  Hi jcdck,

  I see that you have some problems with your recovery disk. Create a new user account won't get your recovery disk. The same file structure will be implemented regardless of the user account. You should not generally be copy or save anything on the recovery disk.

  You should be able to restore your PC to factory settings , but you need to back up personal files on an external drive or burn to a CD. It might not get your recovery back disc because this isn't the Windows function of HP.

  Your only other option is to order the recovery CD for your model. If you can provide me with your product number I should be able to get your link to order. Are which country you located?

  Thank you

• SRV Win2k3 creating the new user at startup profile

  My Win2K3 Server creates a new user profile when starting, rather than use the existing account.
  For example, the account is called "USER"
  It creates a new profile named "USER. DOMAIN ".

  The "new USER. The DOMAIN profile"seems to have migrated all the parameters of the 'USER' profile, so that it is almost impossible to tell them apart.

  My problem is that this profile does not seem to be able to access the DHCP and DNS server (and other services) and the other server Win2K3, which is of the BDC.

  I tried to remove the disk from the machine and on another windows machine, remove the directory "USER. DOMAIN"and place it on a USB key. Then, turn the player on and start again. It just creates another "USER. The DOMAIN profile"again but this time that all parameters were also lost as if it created a whole new USER profile from scratch.

  I need to get her back to the original profile 'USER' to make everything functional again.

  I would also like to know how this happened and why, if someone wants to be good enough to explain it to me.

  Your help would be greatly appreciated.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When I connect XP it creates a new user profile for me every time. All my documents are gone?

  When I connect XP it creates a new user profile for me every time. All my documents are gone? When I look at it is a new profile is created each time with 000 ext 001 or 002. I tried the restore. I get the error. any suggestions?

  Hello

  · What is the error message when you try to restore?

  · You receive an error message or error code when you start the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the number and the model of the computer?

  See the link below and try the steps in the same and check if it helps: problems with Windows XP if your profile is damaged: http://support.microsoft.com/kb/326688

• I just created a new 'user account '. Now all my files are considered to be "hidden".

  original title: hidden files

  I just created a new 'user account '. Now all my files are considered to be "hidden". "I have thousands of .psd and jpeg files). Is it possible to change this for all files in that account without having to access each?

  I don't know what caused the problem, but you can go to control panel | Folder options | Display and enable the display of the hidden files and folders.

  Steve

• the profile user account folder can be renamed instead of create a new user account

  I noticed this issue posted everywhere that none got the answer, the person posting was looking for.  Basically, the question is "can the folder of the user profile account be renamed? '...  I have the same problem.  I sent a PC in for repair.  They reloaded the operating system and created the new test user account.  Rather than just create a new user account, I've renamed the test NAME user account.  I couldn't help but notice later that user account folder name has remained the same "TEST".  That's why you have people to ask the question "can the folder of the user profile account be renamed instead of create a new user account."  It of an easy fix but does not answer the question.

  It is not usually. If you have a computer, why not have just him take care of it for you instead of friction top yourself? ;-)

  Try this instead if you really must do it yourself:

  1. create a new administrator account. Call it 'CompAdmin' or 'Tech' or similar. You definitely want to have an administrative user account like this set up that you will use not except for emergency situations. You will use this in the elevation of privileges in your daily report - which will be a Standard account - but will not need to connect to CompAdmin after that company copy unless something goes terribly wrong. ;-)

  2. create a new user account Standard for your daily work. This called something that makes you happy. I don't know your real name, so I'll call it "HDXer". Connect to HDXer to create the profile files/folders.

  3. connect to CompAdmin and:

  a. Control Panel > everything on the control panel > Folder Options

  b. click on the view tab, click hidden files and folders, clear the Hide protected operating system files check box and then click OK. Now you can see everything.

  c. using Windows Explorer ("computer"), search for the file C:\Users\Test.

  d. Select all files and folders in this folder, except the following files: Ntuser.dat, Ntuser.dat.log and Ntuser.ini.

  e. click on the Edit menu and then click on copy. If you don't see the Edit menu, press ALT.

  f. Locate the C:\Users\HDXer folder.

  g. click the Edit menu and then click on paste. If you don't see the Edit menu, press ALT.

  Sign out and then sign back in as a HDXer. All your stuff should be there. You need to configure your icons and wallpaper (Control Panel > Personalize) and some preferences have been postponed, but really with the exception of the email all your data, Favorites, etc., should now be at the HDXer.

  If you have messages in an e-mail program, such as Windows Live Mail, Thunderbird or Outlook, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. Because I don't know what you use for email, I can't give you the details about it. If everything is working properly, you can remove the old Test profile by using the user accounts applet in Control Panel. It won't hurt anything to make you leave the trial on the system for a while, or even forever.
  MS - MVP - Elephant Boy computers - don't panic!

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• How to keep my entire office when I create a new user account

  I just created a new user account to solve a problem with my account live mail, but I want to keep my old office display.  How to achieve this?

  Hello

  Thanks for your posting in Microsoft Community

  What type of account you created?
  Is it a limited account or administrator?
  If sa is an account limited, you will need to log in as administrator account and you must give permission to access Office

  If it's an administrator account you can access the desktop computer from the old account to which you want to access by going to
  my computer > c drive > user > desktop and copy those file on your desktop or other disc

  Account limited, you must log on as an administrator and give permission to access desktop of type lusrmgr.msc in the box RUN and press on into the House.

  Double-click the users folder > right click on the new account is created (have you creat) > properties > click on Member of > add > administrator...

  And trying to hold the Office to your account

• How to remove an admin account and create a new user profile

  Hi, I have been using my 2 in 1 PC since July last year and I'd like you guys to show me the steps on How to remove an admin account and create a new user account.

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you try to delete a local administrator account?
  2. are you able to connect using the Microsoft account?

  Thank you for your query details.

  I also like the fact you want to know how to remove an administrator account and create

  a new user account.

  If you are able to connect on the Microsoft account, I suggest you try the following steps to remove an administrator account.

  a. press Windows + X keys and click on computer management.
  b. click on "local users and groups" and then click on "users".
  c. right-click on the account which you want to remove, and then click 'Remove'.
  d. click 'Yes', if the prompt message.

  To create a new user account, please see this article:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  See also:
  User accounts: FAQ
  http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-8

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows 8.1 did not create a user profile after creating a new user

  I was deeply puzzled by this problem.

  Just bought a MS Surface Pro 128 GB and upgraded to 8.1 Windows it works fine until I needed to create a new user. He is a user of child for my daughter with a local account only. After creating the new user account, I tried to logon. He complained "user profile Service does not have the sign in» Google it and found the solution to change the registry for the location of the profile displayed on many sites. So I launched regedit. But to my surprise, there is no entry for the new user to the profilelist title - there are only two entries: one for me (admin), and the other is for a user named "fwuser". So I couldn't use the method to rename the master for this problem.

  Could someone give me a tip, which could cause this problem and how to fix it? Much appreciate it.

  Hello

  Have you tried this fix, please try it out and tell us:

  http://www.kapilarya.com/fix-error-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded-for-Windows-8

  Hope this helps, good luck :)

• Cannot create a new user in vCO - error LDAP 53

  Hi guys,.

  It seems to be an old topic, but it is still not resolved correctly.

  I would like to create a new user in vCO workflow, and I read this discussion: http://communities.vmware.com/message/2190530#2190530

  We faced the same problem, the same error, and I went through all the solutions proposed in this discussion, which are:

  • create a user in a group or ORGANIZATIONAL unit, with or without password
  • ADC version: 1.0.2 vCenter Server version: 5.1.0
  • Domain controller authenticate certificate imported to vCO
  • Use SLL - verified
  • No worries about the RIGHT of ACCESS, I am the admin, I can't do anything
  • Server and client rebooted a million times

  However, it still does not work, keep throw me the same error:

  

  No additional details on this issue will be appreciated.

  Thank you

  The password you provide meets the complexity requirements?

• Cannot create a new user

  I just installed the plugins from Active Directory 1.0.2 and I'm trying to a create user AD using Orchestrator 4.2.0 script. I use Windows 2008 R2 as my Active Directory server.

  I get this error when I use the port 3286 (using GC):

  "Failed to create a new user: InternalError: cannot create the account of user...". [LDAP: error code 53-00002035: LdapErr: IDDM-0C090BF4, comment: operation not allowed through port GC, data 0, v1db0] (Workflow: NewUsers/Create User (point 7) #6) »

  I get this error when I use port 389 (the default port):

  "Failed to create a new user: InternalError: cannot create the account of user...". [LDAP: error code 53 - 0000052D: SvcErr: IDDM-031A120C, problem 5003 (WILL_NOT_PERFORM), data 0] (Workflow: NewUsers / Create User (point 7) #3) (Workflow: NewUsers/Create User (point 7) #6) »

  Configuration server-side seems good. I use the same information as the LDAP configuration (without the box copy) and I use a Director as the user (until I can fix this error).

  It's the line of script that may cause the error:

  userOU.createUser (domainName, accountName, displayName);
  

  where accountname, domain name, and displayName is string and user is a valid ORGANIZATIONAL unit selected using the graphical interface.

  Someone has any idea how to solve this problem?

  Thank you

  Phil

  Quite possible restrictions on password as Joerg says... If this is the case, you must configure the AD plugin to use SSL - to do this, you must import a domain controller authentication certificate to vCO. This certificate will allow the vCO establish a secure connection to your domain controller to create new accounts of users per password

  Good luck!

• Remove the admin and create a new user without disc 10.6.5

  I got a new computer from a friend, family, which has expired.    I did not drive or Admin password, how do I remove the admin wipe and back in mobile by default so I can create a new user

  You will need the original installation provided with computer discs.

  Clean Install of Snow Leopard

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.