problem in reading the http to RSS feed link

Similar Questions

• How to solve "here has been a problem to read the data in the layer. read the composite data instead? »

  Hello

  I'm working on the UI for a 2 month Word Press theme, and it has a ton of layers with file size of 900 MB.

  When designing, I get a message that says:

  "here was a problem to read the data in the layer. read the composite data instead? »

  Please solve this problem because I am so tired of working on this that I don't want this effort in vain.

  and sorry if my English is bad.

  

  Hi AymanAlrifai,

  Would you be able to share the file problem with me zipped upward? petgreen [at] adobe [dot] com

  I'll see if I have the same problem and check with the team to investigate the issue here and see if we can resolve it for you.

  Kind regards

  Pete

• Problem connecting to the https endpoint

  Hello

  I am unable to connect to my client endpoint URL (https://xxxxxxxxx/xxxxxxxxservices.svc?wsdl=wsdl1), when I open this url in the browser, I am able to connect to it, but when I use Webservice composite .xml under exception display adapter

  "Error reading WSDL file . https://XXXXX " Exception WSDL: Fault code = PARSER_ERROR: cannot read the wsdl file to the"xxxxxxxxxx"caused by javax.net.ssl.sslHandshakeException: javax.net.ssl.SSLHandshakeException:sun.security.validator.ValidatorException: no confidence certificatefound '

  Please help me solve this problem.

  Thank you

  Kind regards

  Francis

  You must add certificates for JDeveloper. Basically extract the certificate (or certificates chain) when you connect to the site through your browser and add them to JDeveloper.

  That will solve your problem.

  See you soon,.

  André

• Re-reading the HTTP traffic to a CF Server

  It is a technical question. I recorded a bunch of HTTP traffic to my CF application do the actions I want to replay at a later date for testing purposes. These records relate to a user by logging into the application followed by the user who runs a bunch of actions. In order to read this traffic accurately I set up traffic re-read for adjust its cookies to maintain session as the session used when recording will be expired at this time there.

  This approach works very well for 1 customer or if, but when I start this scaling up to many customers, he begins to intermittently fail. The replay debugging clients who fail, I see that the server generates a new JSESSIONID cookie for each answer even if I send the correct cookie in the query. However, for a proofreading client that works correctly, I see the cookie JSESSIONID remains the same for the entire session. After a time of execution of many clients using this method CF server seems unable to accept any client proofreading. Restarting the server seems to correct this problem, but then it starts to reproduce.

  My guess is it has something to do with the internal components of the configuration of CF or J2EE session configuration. Someone with more knowledge of these applications there an idea what could be wrong?

  Well, I managed to solve this problem. It turns out that the reset of the session came from a CF error that says double Session detected. It was because there was still another variable of State management passed around the http message body called Iddm. I managed to pull this of the response from the server and send it to the following applications. This seems to have solved the problem.

• Problem to read the details of the new widget news

  I'm having a problem of reading new news of the widget. Maybe someone could help me.

  When I click on the title of a news article, it opens the browser, seems to go to the site news.qwapi.com and returns an erros indicating that the site is currently unavailable. Things seemed to work fine until a few days ago and I did not recent changes that I'm aware of that could be the cause of this problem.

  It happens not all the press articles, some successfully opened on Reuers, etc..

  Did anyone else encounter this problem with their Cliq XT?

  Concerning

  I had the same problem this morning, just removed and added the widget to the home screen, and it worked fine afterwards.

• Problem in reading the PWM signals in myRIO 1900

  Hi guys,.

  I work with myRIO to generate PWM pulses.

  Here is the block diagram of my circuit.

  

  I connected external to the analog input pin PWM pin. So I can watch the PWM pulse in the waveform table.

  But the waveform is not clear. This is as shown in the screenshot.

  

  

  See that the waveform is not correct. When I'm watching the same PWM pulses in the CRO (cathode ray Oscilloscope, oscilloscope real in the real world), I get exactly the waveform. that is, the PWM pulses are generated correctly. But the analog read is unable to read the PWM pulses.

  I faced the same problem with the pin of analog reading earlier when I read the input voltage. Is not give continuous reading of the voltage input.

  Please guide me how to read these impulses via analog read.

  Please tell me at what frequency range, I can use this myRIO to generate impulses?

  I am able to use 40 kHz?

  Hi rcs.
  The desired pulse frequency is 10 KHz. My sampling rate must therefore 100 kHz, which is not possible in data acquisition mode. There is another problem with the myRIO. Only AI0, BI0 and CI0 has n-sample mode. The analog input pins is still have no n-sample mode. But in my project, I need 4 pins of I in n-sample mode, which is not possible. In addition, the sampling rate should also be favourable, which does not happen in my case. We can say that this is a disadvantage of myRIO with data acquisition mode.
  The only alternative to solve this problem is to use FPGA in myRIO.
  He can taste a 25nS rate.
  But little complexity is there

• Problem using: read the spreadsheet file

  Hello

  I have 2 problems with reading spreadsheet file:

  (1) for the use of .txt file I can get the first column and not the other (even if I chose the correct output...)

  (2) this does not at all when you use my .xls file

  I must do something wrong but can't find what...

  Has anyone an idea?

  I have attached the .VI and my two files.

  Thank you

  User

  A native Excel file is NOT a text file.  It is a format of custom file created by Microsoft.  This is why you must use ActiveX to interact with him.

  The worksheet ' ' folder features found in the work of LabVIEW with text files (delimited by tabs, CSV, etc.).  The text files are a format more generic that can be read by programs such as Notepad.  Tried to use Notepad to open an .xls file?  It does not work.  Excel can open a text file, because it is a generic format.

  So even if everyone automatically thinks "Excel" when they see the word "Spreadsheet", the two are not synonymous.  In the case of LabVIEW, 'Spreadsheet' made reference to a delimited text file.

  Who is?

• Problems with reading the series bytes

  Hello

  I currently have a PIC18F microcontroller serial communication with LABview using the base read and write.vi series. The PEAK sends strings such as "V222! (V is the character of the header, and! being the end character). Then, I have a program to take each individual character read and concatenate them in a larger string for data extraction. The port has been configured to 38400 baud and be only a single byte of long.

  The captain sends this one byte at the time and the problem here is that LABview seems to be only reading V most of the time, and occasinally has 2. Since it doesn't seem to be never read the end character, the sequence of extracting data from my code is never executed.

  A few questions I have are:

  The captain may send one byte at a time, but also all other devices communicate through a serial port.  The definition of the serial port involves both a byte.  Actually it's really a LITTLE at a time.  But serial port parameters leads to the gathering of 7 or 8 bits to produce a byte.  The PEAK sends a follow-up byte to another byte, etc.  The time between shipments of the byte may be too small to read contiguously in your Labview program.

  At very slow speeds, it could really work.  At 300 baud (3mS / bit), there are 33 mS to send a byte (8-bit + stop bit, start bit).  So if your loop runs fast enough, you get every byte one at a time.  But there is the overhead of other code to store the bytes, etc..

  38000 baud to only 0.2 mS to send a byte.  LabVIEW is not fast enough to loop at this rate to capture all the bytes individually.

  But why bother?  Simply capture all the bytes and treat them as a complete message.

• Problem in reading the value of field ITResourceLookup

  Hi all
  
  I HAV created as an object with a field of ITResourceLookup. Also I HAV created a task assignment to the choice the approver adapter dynamically a file. This adapter calls a java method to read the approver in the properties for the selected ITResource file.
  
  I am facing problem in the adapter mapping variable operational assignment with ITResourceLookup field of the shape of the object. Sound does not come as a string or a long. Please suggest how to read the name of the resource.
  
  INIYA

  You can always pass the key of the instance and then use the api to get the value of the form data.

  -Kevin

• Problem in reading the file RAW, the ARW by Sony A7

  I use LR 5.7 with Camera Raw 8.7 with my Macbook.

  I don't know why it does not read the type ARW file created by Sony camera.

  Help, please.

  Correct, 5.7.1 is the latest version of the LR5. For the LR6, you have the choice of buying an upgrade for about $ 80 autonomous, perpetual License or you purchase a package.

  You can also use the DNG Converter, free, convert to DNG and import them into your current LR5.

  I suggest upgrading to LR 6 and don't miss out on what's new. Don't forget to update 6.1.1 and not the last 6.2 / 6.2.1.

• Failed to read the HTTP HDL-hds-live/livepkgr flow

  Dear Sir

  I am just turn into FMS 4.5 and want to broadcast both Flash and iOS.

  I installed FMS 4.5 and streaming to the direct application and works very well.

  As you already know, to offer both Flash and iOS, I use livepkgr for HTTP streaming, but reckoned he won't play when using the tool of suggested reading.

  I have well configured Flash Media Encoder for synchronization, rtmp://localhost/livepkgr in the FMS URL field and livestream? adbe-live-event = liveevent in the text box of the flow for only HTTP streaming. When you try to play the streaming via this HTTP URL:

  http://localhost:8134/HDS-live/livepkgr/_definst_/LiveEvent/Livestream.F4M

  It shows this message: we have problems with playback. We apologize for the inconvenience.

  If I type http://localhost:8134/hds-live/livepkgr/_definst_/liveevent/livestream.f4m directly in the browser address bar to see if the file exists, this is what I got:

  "< manifest xmlns="http://ns.adobe.com/f4m/1.0">"

  < id > livepkgr/events/_definst_/liveevent < /ID >

  < streamType > Live < / streamType >

  < duration > 0 < / duration >

  "< bootstrapInfo profile="named"' url= '... /... /.. /Streams/livepkgr/Streams/_definst_/livestream/livestream.bootstrap' id="bootstrap8547">< / bootstrapInfo >

  "< media streamId="livestream" url= '.. /.. /.. / Streams/livepkgr/Streams/_definst_/livestream/livestream" bootstrapInfoId= "bootstrap8547"> "

  < metadata >

  AgAKb25NZXRhRGF0YQgAAAAAAAV3aWR0aABAhAAAAAAAAAAGaGVpZ2h0AEB2gAAAAAAAAAx2aWRlb2NvZGVjaWQCAA RIMjY0AAxhdWRpb2NvZGVjaWQCAAQubXAzAAphdmNwcm9maWxlAEBTQAAAAAAAAAhhdmNsZXZlbABANgAAAAAAAAAP YXVkaW9zYW1wbGVyYXRlAEDVfAAAAAAAAA1hdWRpb2NoYW5uZWxzAEAAAAAAAAAAAAl0cmFja2luZm8KAAAAAwMACX RpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkDAAl0aW1lc2NhbGUAQI9AAAAAAAAACGxhbmd1YWdl AgADZW5nAAAJAwAJdGltZXNjYWxlAECPQAAAAAAAAAhsYW5ndWFnZQIAA2VuZwAACQAACQ is

  < / metadata >

  < / media >

  < / manifesto >

  Please quick help is really needed.

  Installation directory to check if you have the crossdomain.xml policy file in root FMS webroot folder. If the file is present and you are still not able to play, then you can try the following steps:

  • Stop the publication of Flash Media Live Encoder and disconnect from the FMS.
  • Delete the folder of waterways under /applications/file livepkgr and .stream under /applications/livepkgr/events/_definst_/liveevent folder.
  • Connect to the FMS of Flash Media Live Encoder and start publish it. And then check the reading.

• Problem in reading the spectrum

  Hi all

  @SynergyMike,

  I found the solution to the problem... The initialize Vi at the beginning that we must retain the value of fake reset so it remains empty and read only one value... Just try it...

  Thank you so much everyone...

  Patricia

• problems to read the swf in DWCS4?

  :-(

  http://www.sceneryconcepts.com/copy%20Of%20Index.html

  SWF inserted into a web page,

  SWF in the site folder

  the skin in the site folder

  folder scripts expressinstallin

  swobject in the scripts folder

  direct path to the swf file

  http://www.sceneryconcepts.com/Sylv1.swf

  Looin' to a large white space instead of the flash - who plays fine in preview in the browser (firefox) even mode.

  Help?

  Please?

  Hello

  You import the f4v as an flv file.

  PZ

  www.pziecina.com

• First Elements 7: problems to read the mts video format

  Hi all

  I need a little help here:

  I have currently two adobe first elements 7 and corel video studio 11 is installed on the same computer.  I am able to import video from my canon HG10 (MTS) files no problem in both programs.  Hwoever, I am experiencing extreme video and voice in adobe, but not in my corel offset.  I prefer to do all my video editing in adobe.  Am I missing something? using the preset wrong? Please help... can be specific to the present I have to use to play good mts video in adobe?

  My current system:

  processor Intel core 2 duo CPU

  [email protected]

  3.50 GB of ram

  NVIDIA 9600GT

  Thank you

  Peter

  The Canon HG10 is a more intensive camcorder AVCHD video format to change. Most of the people who are editing in Premiere Elements successfully use processors quad core with 4 GB of RAM. It's possible Corel operates somewhat more effectively and could possibly run on your system. (Make sure you that you make your video in first items, pressing ENTER to keep the red line along the top of the timeline from firing at the Green, before you judge playback of the video.)

  However, ensure that when you edit in Premiere Elements that you are using a predefined project AVCHD and you are using the media Downloader (under organize, get the media, AVCHD camcorder) to download your video from the camcorder. Using a program to capture your video and the other for editing can often lead to problems you encounter.

• I have a problem with reading the free cells.

  Yesterday, I played solitaire free cell. Today, I tried and received a message, "cannot open was moving" can't find it

  Try to uninstall the game, reboot, and reinstall the game.

  (then "view by" small or large icons)

  (then, at the top left)

  Once the list fills, click the [+] sign box games, uncheck FreeCell, and restart the PC.

  Then repeat the process but ticks FreeCell.