Problem in the dough in duplex

Similar Questions

• How to solve a serious problem with the Battary of my T500 laptop?

  Hi Forum,

  My laptop is Lenovo THINKPAD T500 2055, and its main features are the following:

  -T 39, 6651 SBB 9 CELL LI-ION BATTERY
  -Processor Intel Core 2 Duo T9400 (2.53 GHz, 1066 MHz, 6MBL2)
  -8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066 MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
  -HDD 2 GB Intel Turbo Memory cache.
  -ATI Mobility Radeon 3650 with 256 MB.
  -160 GB of HDD, 7200 RPM.
  -Windows 7 complete edition with the latest Service Pack (x 64).

  My problem with precision and brevity is the Battary. I was using my laptop with the same battary since 01.01.2009 (almost 3.5 years), and the battary works quite OK.

  Most of the time, that my laptop is plugged and work with electricity. However, A very short time, I used the laptop while it is running on battery power, however, I used to empty the weeks of the dough from time to time, i.e. all 3, I unplug the charger and continue to use the laptop until I see the orange warning sign (5%), then, I connect again.

  Fortunately, I never had problems with the battary or the cell phone, and when I charge the laptop usually it shows sign full (100%).

  Suddenly three days ago my laptop starts to blink and the orange sign battary constantly in charge shows 100%. When I try to run on the battery by disconnecting the AC adapter, the laptop immediately loses its power and stops immediately.

  What do you do? Could you please give me useful tips to solve this problem?

  I'd be greatly and sincerely appreciate all of your entries!

  Thank you for your consideration of my request and I look forward to hearing from you soon!

  Replace the battery!

• Since my 10.0.2 upgrade on my iPhone 5 my Wifi doesn't connect anywhere except home! This has never been a problem in the past I have connected everywhere wherever I was going to automatically! Is - this rare?

  Since my upgrade to 10.0.2 on my iPhone 5 my phone only connects to Wifi when I'm at home (cancelling the purpose of a MOBILE phone). This was never a problem in the past a my phone automatically and I received and could send emails, messages and use messenger etc automatically. Is - this rare?

  Hi John,.

  Please visit Apple support communities.

  I see that your iPhone 5 is not connect to other Wi - Fi networks after update to iOS 10. We offer troubleshooting tips.

  Since your wireless network is working, but you cannot connect to other networks, start with the next step in If your iPhone, iPad or iPod touch connects to a Wi-Fi network:
  
  

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  Sincerely.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Add face problems - adjust the framework

  I have problems with the section "add a face" on iPhoto. The frame that appears often will not drag to make the image smaller, so that several people appear in the thumbnail instead of one of the faces that I want to identify. (Sometimes it works.) Do you have a suggestion on how to solve this problem?

  I use iPhoto 11', Version 9.4.3 on OS X, Version 10.8.5.

  Thank you.

  Try restarting iPhoto, as appropriate.

  Are very small photos, so that there are not enough pixels for a face frame?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• When I click on "Copy picture", when I use the dough, it's to show the image URL

  Hello

  I'm having a problem about the exemplary Image resource. I need to copy and paste a lot of images to work.

  I click on an image, holding control and then press "copy picture". But when I paste, it shows the URL of the image and not the image. I tried on different browsers and apps, but the same error occurs.

  Can someone help me please? How should I do? It has changed from one day to the other.

  Thank you

  It looks like you use context Menus to copy your images. Depending on your machine or software, each user will have different contextual shortcuts.

  You might do better to use an application like SnapnDrag, which is free in its basic mode.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• I rented a movie on google play. He will not play. I get a message that says: "there was a problem playing the video on this browser. Help!

  I rented the movie and proceeded to go to google play to see. It acts like it is loading, but the screen goes black and a message says: "there was a problem playing the video on this browser. Try the movies play & TV Chrome App. Learn how to install Chrome and chromium app here. problem: I tried to download Chrome (which I don't like), but it seems not to take. I even rebooted. Google opens upward in Chrome. I really want to watch this movie! Help!

  Try:

  • https://support.Mozilla.org/KB/fix-common-audio-and-video-issues

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!