How to solve a serious problem with the Battary of my T500 laptop?

Similar Questions

• My customer is having a serious problem with the Contact form Widget

  My Client is to have a serious problem with the Contact form Widget that I can't seem to figure out how to fix.

  I created a website for a client and inserted a widget of Contact form on the "Contact us" page Whenever someone uses the form, e-mail receive my client shows my e-mail address as the sender. So when they "meet" the email, the response is sent to me and not the person who sent the original message. This creates a major problem in that I get flooded with answers e-mail while my client's potential customers go without a response.

  When I look at ' Site Manager > email system > Workflow information > e-mail address on the site administration Console, it displays my e-mail information. This is what needs to be changed?  If this is the case, what needs to be placed in this field for the email address of my client receives presents information email senders in the field "from".  My client wants to be able to click on reply and the message sent to the right side. They would be very angry if should be cut and past shippers Correo electronico of the body text on all the contacts they receive.

  Their feeling is that if I can't find a way to make the contact form works as it should, then there is no need for them.

  Can someone help me understand this? I really don't want to disappoint my first client.

  Congratulations for your first customer! =>

  Looks like you can have your email in places where your customers email should be.

  Here are the places you need to change your e-mail address.

  First adjust the answering of your web form is your customer email. Screenshot: http://screencast.com/t/YWiZZ30E0jE and http://screencast.com/t/u4t69anTLR

  Second set Emails to come your clients e-mail system. Site management > system email > set default "from" e-mail. Screenshot: http://screencast.com/t/EAr2sfXk

  I always go through each email system and check the e-mail address after you set the default value. I found that it doesn't always change them for some reason any. Note: If you are on a lower to webCommerce plan your list can be shorter than what is shown.

  Make sure that the email you the list of customers is also an email they want in public.

  Also provide information on the TSA that thetrickster888 is good information.

  I hope this helps.

  Lynda

• Firefox and serious problems with the police on the websites bloglike.

  Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.

  Images:
  Twetter / thumblr / other

  Yes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1

  You can use this extension to see what fonts are used for the selected text.

  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• Change hard drives where the files stored, how to ensure that no problems with the catalogue

  I replaced the 3 TB drive (and readers of backup related) who hold all the image files on my Mac Pro with a 5 TB drive.

  The player has only the image on her files. The catalog and previews remain in the folder of images on my main system drive.  I formatted the new drive in an external hard drive enclosure, then used Super Duper to copy the image of the old 3 TB HD files to new hard disk 5 TB. Now, I'm ready to install the new HD 5 to in the computer and the catalog of links to it, but want to make sure you do it correctly.

  This player has 81 000 image files, catalogued in 15 "buckets", each "bucket" with about 15 cases of work, so I obviously want to make sure that I don't have to tie all these files by hand.

  What is the best method to do this, so I have no problem with the catalog know the new location of the files?

  Mac OSX 10.10.5

  Lightroom CC 2015.1

  Thank you!!

  This player has 81 000 image files, catalogued in 15 "buckets", each "bucket" with about 15 cases of work, so I obviously want to make sure that I don't have to tie all these files by hand.

  What is the best method to do this, so I have no problem with the catalog know the new location of the files?

  Instructions are here: Adobe Lightroom - find folders and files moved or missing connect the parent (as shown in Figure 4) folder, and then all subfolders will be also connected. If I understand your use of the word 'bucket' (do you really mean "parent folder"?), then you will need to do this for each of the 15 buckets.

  It would be much easier if you had a 'bucket' or parent folder and many subfolders and sub-sub-folders.

• Serious problems with the 6.16 update: reboot page & chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi

• BlackBerry Bond serious problems with the GPS on BB jump with OS 10.3.1

  Hello

  I have 3 problems with my BB jump; for 1 of it, I write here a solution.

  When I get on the maps of BB (installed by default) with location and a Wi - Fi enabled connection, my position still show that I'm somewhere in Basel (Switzerland), even though I live in other countries European. I tried the settings, and I can't find anywhere any preset location. Is it not strange that the GPS is not able to find my REAL position? Please let me know what I can do to be legitimate spotted.

  the other secondary issues which I hope will be resolved with upgrades:

  1. the sound of the keyboard cannot be completely reduced, even if the sound is at a minimum.

  2. the sound of the camera has no parameters to kill noise when shooting.

  Thank you.

  citizen_ka wrote:

  It is true that I didn't try the device under the sky :).

  Well, there you go. Go outside with a view of the sky, no buildings.

  What part of the world, what country are you?

  citizen_ka wrote:

  the volume is set to minimum maximum and still makes audible clicks when entering.

  Minimum only.

• Urgent: Facing serious problems with the installation of BEEP

  Hi all
  
  This was a pain for me now,
  
  I installed the BEEPER and his works fine. Its set up on my desk and I connect to the databases locally. But when I restart my system, OC4J would not get initialized and so I'm not able to launch published BEEP. Among the various warning messages following me:
  
  * WARNING: Source Code C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlps
  erver\WEB-INF\lib\ldapjclnt10.jar (from WEB-INF/lib/directory in C:\OracleBI\oc
  4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB - INF\lib) has the same thread
  Ename but is not identical to the /C:/OracleBI/oc4j_bi/jlib/ldapjclnt10.jar (of < c)
  Ode-source > in META-INF/boot.xml to C:\OracleBI\oc4j_bi\j2ee\home\oc4j.jar). If
  There are different versions of the same classes, he's going to be hidden like the lat
  TER is already visible in the search path for the xmlpserver.web.xmlpserver:0 charger.
  0.0 *
  
  Now I tried to copy the file on to a device at the chance of another, but still no. I reinstalled the JDK and BEEP twice but still no luck... I mean, is there a way to solve this problem. Can any body please help me with this as to why I get this warning message. When I try to reinstall the BEEP it asks me to fix it... is it possible that I can reinstall my system completely and not repair.
  
  
  Need for emergency assistance (if any body wants the screenshots, I can predict that too)
  
  
  Thank you
  Ronny

  Ronny,

  the warning you have posted is just a warning and normally BI Publisher (OC4J) works even with this warning. There must be something else wrong.

  Concerning
  Rainer

  P.S.: If it's an urgent question it might be a good idea to open a SR

• SERIOUS problems with the activation of Windows key, Windows on Macbook via the activation key (hard to read now) / windows (Parallels) "IS VALID", but I did "" Installation disc. IMMEDIATE assistance.

  I bought Parallels for my Macbook and moved my Windows to him, but after a month or two, I was invited for a product key that I have written, but was rejected and I have since then been locked my window and my data lost as a result, I have an installation disc and product key that I "KNOW" is correct doesn't work ' ". Someone please tell me what the matter, is because I'm seriously at my wits end.

  The problem is not a software but a licensing of one.

  Your existing OEM license cannot be transferred to a new machine--and it is difficult to do a upgrade to a non-genuine system (by design).

  You always have your machine 'physical Windows' available? He's still in the original configuration that you want to transfer?

  Apply you the full Ultimate who license and activate it, then repeat the virtualization

  The new virtual machine will still complain of activation status initially, but you will be able to reactivate in the virtual environment.

  You then have to take back the physical machine to the Home Premium of origin by a reinstall license using recovery madia or sale at retail or restore an image from before the upggrade.

• serious problem with the network card drivers

  Ok. I've been messing around last night, playing GTA San Andreas on my laptop. I wanted to see what the resolution that I could run in, so I tinker with them a little more. I tried to apply a change and my laptop screen keeps flashing between 'off' black and black 'menu of the game' and I had to manually turn off because nothing has worked. When I rebooted, I found that I had no internet. This happens fairly regularly (my laptop is a bit grumpy and so it the wireless), so I don't think about it. But this morning, when I really need to search for a document, I found that I couldn't connect to the internet - or via my wireless ethernet cable. I think I'm done at the root of the problem, however: when I go to Device Manager, every single "network card" has a yellow exclamation mark next to it. If I double click on one, it says under device status as "this device does not work properly because Windows cannot load the drivers required for the device (code 31)." After seeing this, I was indirectly bothered to download/install the latest drivers for the two most important cards (Intel Pro / wireless 3945ABG and RTL9101 Realtek PCI-E). They said facilities were successful, but after a reboot, I always saw all connections and it has not responded to my ethernet cable.
  If I right-click on one of the cards and choose "update the driver software", then select the new drivers manually, it starts to install it and then says "windows has detected software driver for your device but encountered an error...". This device does not work properly because windows cannot load the drivers required for this device (code 31).

  I don't really know where to go from here (I'll try to update BIOS driver, but I'm skeptical that it will help), and any help at all would be much appreciated. I called HP and they said my warranty was up and wanted me to pay for their "advice".

  The laptop is a HP Pavilion dv6920us.

  Thank you very much!

  Hello

  What system do you currently use?

• How can I report a problem with the Firefox Web browser?

  I use the Firefox web browser, my OS is Windows 10 pro. I am the webmaster for the site http://eckankarinoklahoma.org. When I revise and update the pages of the site, Firefox does not recognize changes you make until I hit the button reload (renewal) to the right of the address. However, when there is no button to reload a page, Firefox won't recognize the changes that have been made until I delete my browsing history. It seems to read pages web history. I tried everything to reload the page to get out of the site and back, etc.. to get Firefox to recognize the changes but it will not. As I said, the only way I can get it to recognize the changes is to delete my history, which is a real pain. The page is not a reload button is a password protected page. See the above site and click on the left menu "Connect members here." However, by visiting this page, you'll be able to see the problem until what you have visited and there again once it has been revised. The only revision made to this page is the date in the label asking the password. The password works fine, it's just that the label will never update and it is important for users to know in what section to find the password. Sorry for the verbosity of the present, but I hope you get the idea of the problem.

  When I look at this home page in the cache, I see that he arrived at expiration (date/time expiration in the past) and so Firefox should look for changes on the next load. If you check your cache, the pages of problem also expire? You can paste the following text in the address bar and press ENTER to load the cache for the homepage information:

  on:-l' the cache entry? storage = disc & uri = http://eckankarinoklahoma. org /.

  To display everything in the cache, start on the topic: cache page.

• BlackBerry App serious problems with the new facebook app!

  Yesterday, I downloaded the latest app facebook to my Q10, because I was excited to be able to choose the setting for the news feed. I ALWAYS want the most recent messages on top of my news feed!

  However, the new application is the TOTAL OPPOSITE of the timeline (not only mine, but also my friend timeline). I just want my most recent messages on top (just like the desktop version of facebook).  However, as I look at my calendar on my Q10, I see a post from 3 days ago (an eternity in the smartphone era) on top of my calendar. The new facebook application, I cannot change that.

  I noticed the same problem when you look at the chronology of the friend. I see 12 - day old post at the top of the timeline of a friend who adds new posts per DAY!

  This glitch is completely unacceptable. This glitch made the laughingstock of BlackBerry! Apple and Samsung are celebrating this glitch affecting BlackBerry users.

  Look, I love the QWERTY keyboard, but this should not be an excuse for neglecting the customers like me who want the best service of our applications.

  This problem has been fixed and a new version is available in beta Zone.

  www.BlackBerry.com/beta

• BlackBerry smartphones URGENT! I have a serious problem with the update to version 7.1 blackberry bold 9900! :(

  Hi all! Starting yesterday I did the software upgrade to version 7.1 (I had 7.0) and since yesterday my bold 9900 is locked at 17% on social RSS!

  I don't know what to do! I tried to connect the phone to the PC via the blackberry desktop software, it seems to connect at the beginning but after awhile the Blackberry Desktop Sowtfare is blocked and it restart the update up to 17% 'social RSS feeds... "

  I also tried to remove the battery, but when I put the battery back, updating block again to 17% social RSS... help me please! I'm really desperate!

  airelav1988 wrote:

  Hi all! Starting yesterday I did the software upgrade to version 7.1 (I had 7.0) and since yesterday my bold 9900 is locked at 17% on social RSS!

  I don't know what to do! I tried to connect the phone to the PC via the blackberry desktop software, it seems to connect at the beginning but after awhile the Blackberry Desktop Sowtfare is blocked and it restart the update up to 17% 'social RSS feeds... "

  I also tried to remove the battery, but when I put the battery back, updating block again to 17% social RSS... help me please! I'm really desperate!

  Hello airelav1988,

  Please see this link. http://supportforums.BlackBerry.com/T5/BlackBerry-Curve/9360-update-its-been-froze-on-7-all-day/m-p/...

  Thank you.

• Problem with the audio sampling during export

  I'm having a problem with my audio sampling rate. For some reason, it is set at 8 khz by default when I export. It wasn't a problem until the last update (2 weeks ago). I'll try and give all the info I can to the front. I also tried customer support... which was a nightmare.

  OK, the question that I address is that when exporting audio sampling rate is 8 kHz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to the h.264 format, he insists on the reset to 8 kHz. Even if I manually set all look rendering queue and click on output module again once it back the sampling frequency to 8 khz automatically of changes that I need to set it again. Why can it not only be fixed to 48000 like all other adobe products is and as it was two weeks ago. Does anyone have an answer?

  This problem is resolved by update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• When I try to record photoshop mi account, there is a problem with the internet connection and I can't continue. How can I solve it?

  I bought a book on Photoshop CS many years ago, and once I installed it in my computer it says I should I enroll the account in order to use Photoshop (or something similar), and it also has a link to go directly to the website of the registry. The problem comes when I try to access this link given, which is an internet link. It appears that my Internet connection is not secure, so I'm not allowed to continue the process, even if I don't really no problem with the connection. As I'm talking about an older version of Photoshop CD, the problem might be that something related to the incompatibility with my version of microsoft. How can I solve this problem, if there is no possible solution?

  Hello

  You can try to use a different browser for this. You can also save the product key by following the steps

  (1) connect to Adobe.com/accounts

  2) click on the plans and the product.

  3) click view your products.

  (4) enter your serial under register no. your products