Problem: lack of dialog of duplex in a Windows 8 (HP LJ P1102)

Similar Questions

• Problems with sleep and stopped after upgrade to Windows 10

  Hello

  So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

  Any solution to this problem?

  Thank you.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• problems to renew the ip address on the windows xp desktop

  I have a dell Windows xp pc.  Internet has always worked well. I have att dsl, my modem is motorola router and cisco/linksys e1000 (crappy system). before I had the 2wire, which worked FINE. in any case, it was an original idea upgrade att I followed the instructions to the letter for the installation. the internet works first via an ethernet connection. then, I installed it on my laptop (wireless) then proceeded to all new via of branch instructions. Once everything was connected wireless connections work fine, but the Office does the same to me 'renew ip' as the other readers. I'm tracking info centres of knowledge re renew ip address, nothing will do. I have mse for safety. I have the cc cleaner that nothing works.  Thanks for all the suggestions.

  Hi kattfenom,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Every time I open a file in Media Player 11, I get a dialog box telling me that Windows Installer is "preparation for installation.

  Whenever I open a file in Microsoft Media Player 11, (11.0.5721.5280) I get a dialog box telling me that Windows Installer is "preparation for installation.

  He tell me what it is trying to install and crashes

  No media plays back.

  Cancellation does not - it retrys with encouraging them. The only way to get rid of the dialogue is Ctrl/Alt/Del and end task. It also closes WMP11

  SP3 Win XP32

  I just installed Office 10

  I ran the repair of Office 10

  I uninstalled WMP11 and reinstalled

  I ran "Fix IT" page Support MS

  I run MS Security Essentials... It is to this day and I run a full scan

  I think you meant:

  "a. initially, box run, type"msiexec /unreg", and then press ENTER."

  I did and it helped somewhat. Message anyway, but he went and the media played.

  If I did:

  "(b) then type" msiexec/regserver"and press ENTER."

  The problem comes back

  I went a step further and ran a restoration of the system to the day, I installed Office - it worked.

• When I click on my desktop shortcut icons in the new firefox 4 I get a dialog box that indicates that windows does not find that the website

  I have improved the previous version of firefox to the new firefox v.4 and now all the shortcut icons I used with the previous version display a pop-up dialog box that says that windows does not find this website, check the spelling - address - etc. But immediately after this window opens the Web site loads. I tried to load the original site, delete the old shortcut and drag the new shortcut to my desktop, but Firefox always gives me the same message.

  See:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• Mixed language in the stop/restart/logout dialog and in the login window

  Since I upgraded to El Capitan my shutdown/restart/logout dialog and in the login window appears in 2 different languages. My mother tongue is Italian, but I have a message in English.

  My default language is System Preferences is Italian and that is not installed.

  Try I'have:

  In the menu bar, select

   ▹ System Preferences... ▹ Language & region

  Deselect each language unwanted from the list and click OK. Then select your region in the menu of the region.

  Close the preferences window. You may need to sign out and then sign back in before the change takes effect.

  If there is no change, reset the PRAM.

  But nothing!

  Can you help me please?

  Do you have other users accounts in your mac?

• I have an ASUS M4A88TD-M/USB3 motherboard. The problem is that I can't find any windows 8 compatible LAN drivers for it.

  Problems of Windows 8 pilots.

  I just installed Windows 8 preview of developer on a virtual machine, I have an ASUS M4A88TD-M/USB3 motherboard. The problem is that I can't find any windows 8 compatible LAN drivers for it. All solutions?

  Given that Windows 8 has not been released yet not all drivers will work with him. Some drivers are very precise on the version of operating system, you may need to wait until they release the pilots of Windows 8 (if they make it to your model).

  If the drivers do not install, try their installation in compatibility mode.

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:
  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in Windows 8.

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Problem with blocking to the bottom of the window.

  I have a problem with my laptop, when I stopped the Windows Xp sp3 professional, he cant turns off. Blue screen Windows is blocking down... and stop on this screen. To disable I must press on & press and hold the power button / stop.

  Which can be a problem?

  Did you get that started after the installation / uninstallation of a whole new software? You can also checkhttp://support.microsoft.com/?kbid=307274 for more information...

• "Symantec service framework stopped working" 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is removed from the privacy of available'Email

  "Symantec service framework stopped working" 'a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is not available"

  Favorite

  E-mail address is removed from the privacy *.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080917103626EN&LG=en&SEG=HHO&CT=us&PVID=nis_2009&selected_nav=5

  http://Service1.Symantec.com/support/Norton360.nsf/0/a5ae667bcb41502b6525729f002036b2?OpenDocument

  It's a Symantec/Norton problem; read the links above.

  Contact Norton Support:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon.

  .

  Mick Murphy - Microsoft partner

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• What does this error message "a problem has been encountered a problem of personalized treatment tools manifest file (C:\Windows\system32\MSCFGTLC.» (XML)"and what can I do about it?

  For about a week now that I get a lot of 'freeze' and try to eliminate contradictory processes that cause my Vista Home Premium 32-bit w / SP1 system to "lock" onto me.

  I tried but can't do a restore effective because none of my points of store go back enough to solve the problem.

  So I try a "clean boot" as described in article http:// support.microsoft.com/kb/331796.

  My system has installed significantly since turning off half of the services non-Microsoft configured to run at startup.

  But every time I launch msconfig.exe I get this error message-"a problem when processing custom tools manifest file (C:\Windows\system32\MSCFGTLC. '"). XML ".

  It is not stop fiddling with the boot configuration, but I don't think I should get this error. Any ideas on what it is and what to do about this?

  HP Pavilion dv6700 Notebook PC AMD Turion (TM) 64 X 2 Mobile Technology TL - 60 GHz 2.00 3.00 GB RAM

  Hello ch4rlie1949,

  Run The System File Checker utility:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the appropriate Microsoft versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search .
  2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
  3. To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)

  This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  Check if you have picked up malware in your travels.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  Check in safe mode.

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  See if you can isolate a possible cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135