problem loadMovie, only a poster
flash Hello users,
I am new to as3 and I'm having a few problems getting videos to load via loadmovie. I created two .swf files, both are the same size but on different timelines. I just want to add each to a new movie, a background and one as overlay and let each game repeatedly. I can get one of them to load at once by removing the ActionScript for the other layer, but I was not able to get both to display at the same time, one above the other. I put the actionscript code on the layers where I want to load the .swf...
Here is the ActionScript for the background layer: (name: xbkg)
var loadMovie2 = new Loader();
addChild (loadMovie2);
loadMovie2.load (new URLRequest ("xbkg.swf"));
Here's the code for the cover layer: (name: x)
var loadMovie1 = new Loader();
addChild (loadMovie1);
loadMovie1.load (new URLRequest ("x.swf"));
As I said, if I delete an of these and let others the same, it displays one perfectly.
I feel, it has something to do with the assignment of the var, but I'm not sure. Any help would be appreciated before I throw my computer in the street.
Thank you in advance!
Aaron
You must do something, other than what you have displayed and explained, to cause this problem.
to confirm, create a new fla that contains only the code that you have demonstrated in this forum with these external swf in the same directory.
Tags: Adobe Animate
Similar Questions
-
Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.
Hi Sailortdt,
Welcome to Microsoft Community where you can find the answers related to Windows.
According to the description, it looks like you are facing a problem with network connectivity.
It would be awesome if you could answers to these questions in order to help you further.
1. have you made changes on the computer before this problem?
2. you receive an error message or error code?
I suggest you to see the steps in the following Microsoft article and check if it helps.
Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Fix problem 'local only' when the connection is through a wireless connection
access point appear: unidentified network
Internet appear bloquedaccess: Local only
connection: Wi - Fi connection.Please help verify what is the reason for which "local only".
IP is assigned automatically by DHCP, but is not possible to connect to the internet, the problem appears only on windows vista PC, in my other computer with XP, version the connection is good.I have Microsoft Windows Vista Home Premium SP1.
Thank you
Check how your security is configured on your access point. I had to mess with mine a bit. For some reason, my machines windows 7 were sensitive, in particular on the netgear access point
-
Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64
Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3
Fisico processore Conteggio: 6 Velocità processore: 3214 MHz
PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW
PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!
Hi biagiob,
Seems that the operating system is obsolete.
Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements
Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)
Kind regards
Claes
-
I can't find the post I recently set up here. Have you had an accident which deleted all recent messages?
I wanted to write comments to a suggestion that I got here, which was the use of Acronis as a backup manager...
Manufactured by MowGreen - thank you for your comments.
But you might have some use of the comment, what I am to do - I actually tried on the backup program you suggested; Acronis.
I don't know if you have ever tried to restore a backup? You said that you never 'had to' restore...
I tried to make a backup of my fresh without Norton and all windows and then tried to restore the backup.For me, Acronis 2010 ATI seems pretty useless!
He could not read that a backup of my discs Inter Raid 5 - OK, can be forgiven.
But he could not read from a SATA vanilla which contained a backup.
And when I tried the last option to put a backup on a DVD, the program crashed when trying to read the DVD that contains the backup.
So you better hope that you never have any of your backups - you will never be able to read from this backup.On the problem using Windows Update.
You said that Norton 360 v2 Online is totally incompatible with Windows Vista (or Windows Update?). I am running Windows XP - is the same true for XP?
Is this true for the Norton 360 Version 3 too? All products current Norton is not compatible with Windows?Here is the text that has been deleted on the Forum server:
More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly
I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
I created backups worthless - MS removes automatically after 90 days...But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
famous error when update .NET Framework 1.1 Service Pack 1 and many others
Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
need a large number of fixpacks installed via Windows Update.
Such a group of patches is called KB930494 and the full name is:.NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition
Windows Update gave a brief error msg that this update has failed and I have tried to run this update
manually when it produces the following error message: (note he's telling the truth when it)
claims that "Windows may not work correctly")---
KB930494 Setup errorError while updating your system.
Windows XP has been partially updated and may not work properly.Ok
---So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
Lots of things off, lots of BSOD...Og - of course I should have used the system restore and created a backup that I should come back...!
I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
a valid system by restoring such a backup. Probably because half the file system matches the other.The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?So guys, what is the best utility backup/restore partition there?
Rgds. E. Ben
---
Have you checked on the KB930494.log that is in the WINDOW to see where the installation is a failure?
On a clean install of MCE should no problem by installing the SYSTEM .NET Framework 1.0 Service Pack 3 WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Edition Tablet PC less than security software interferes with the installation and/or corrupt .NET update package.In addition, it can be an order of updates for .NET 1.0 SP3 installation which will avoid the problem your system knows. You install updates in the order they are presented by automatic updates?
See also:
More detailed for .NET Framework 1.0 SP3 and 1.1 SP1 failures troubleshooting ideas
Questions I've seen so far with the installation of .NET Framework 1.0 SP3 and 1.1 SP1As for the backup and restore utilities: http://www.google.com/#hl=en&safe=off&q=Disk+backup&aq=f&aqi=g10&oq=&fp=1&cad=b
I use Acronis image on my MCE box, but have never had to restore it... yet.MowGreen MVP Data Center Management - update of safety Consumer Services
---
Thank you for your response.I didn't know about the log file, but watching her (she is very large) it seems is it can only be useful to those writing or working with
updates...?
You want to send me the file here? (Probably too big). Or you want I send you the file to watch?Only say unique error Code I find gives the following:
Windows XP has been partially updated and may not work properly.
29.641: Update.exe extended error code = 0xf070Interesting piece of info about security SW, because I have Symantec Norton 360 v2 online riddled with bugs, but I'm not
optimist that disable Norton 360 Windows Update would do the trick, especially since I had so much
problems with most of the time updates .NET Framework - it seems that this Windows component is full of problems...On the question of the "order of Installation" I initially let Windows Update handle this the way he wanted to.
After that giving the briefest mention that only KB930494 had failed, I then tried to revive this one update.Do you think the system can be restored using the REPAIR, or whatever, or I have to reinstall all windows
from scratch?Kind regards
---
Ben,There is no need to send or post the log, because the whole .NET updates installation and OS stability problems are caused by Norton 360.
Suggest you clean boot Vista as being expected to eliminate all processes and services of Norton to interfere with the installation of the update.
In fact, you'd be much better off dumping Norton 360 and installing a Windows-compatible antivirus software.
Then launch their removal tool for Norton ensure all remnants no longer stay or run this tool (AppRemover) as she removes a long list of security products.
Then download and install one of the free AVs that work well with Windows Vista, Avast or Antivir .You can probably repair the OS running sfc/scannow from an elevated command prompt .
If that can't do the job, then perform an upgrade on the spot .MowGreen MVP Data Center Management - update of safety Consumer Services
---I can't find the post I recently put up here...
Your history of validation can be found here: http://social.answers.microsoft.com/Forums/en-US/user/threads?user=errbebe
Always reply to your original thread, please.
~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft -
Scan with HP Deskjet 3050 a problem - analysis only about a quarter of a page
I use Mac OS x 10.5.8. My new HP Deskjet 3050 a scan only about a quarter of the page - which swells and then take to the top of the entire page.
I posted a problem as a response, on 16/06/2012 but no response.
Ask for help please.
Please follow these steps on Mac computer.
1. in the Mac menu bar, click Go (if you do not see 'Go', click on an empty area of the screen, then look at the menu in the bar at the top of the page)
2. click on "Utilities" > click on HP utility > click scanning settings > click on "Scan to Computer".
3. click on the tab "scan tasks.4. here you have to select the option that you use when the printer Panel analysis before for example 'Photo file' or 'Document to the file' > then click on the button "Edit".
5. in a row option will appear:Analysis of device HP
Change the file Type scan
Move the items from the Finder
Reveal the Finder
6. Select "Device HP Scan" and now the next option will appear:
Presets (combo)
************************************
Choose the presets on 'Standard' and click OK, and then try to scan from the printer.
.
-
Problem event >; when to post record
Hi friends
I have a problem in the customization of the form IN.
Customization of the form
I put Trigger Event > when to post record
And the trigger object > PO_LINES
And in the State, I have written logic for //If price differs from the standard cost I get a warning of the ll
And in action, I put a warning message that "price varies from the standard cost" so he warns the buyer
My question
All right I get the warning also if the price is different
I get a notification when the PO was created and if the price differs from the standard cost
but I need to click on more than 5 times to close each notification / / this is my problem
I'm looking for where it is taken, I have to close the notification in one click and start the instance
Please can someone help with this problem
your suggestion will be much appreciated
Thanks in advance
ATDouble post - the PO form customization - pl only once. PL to update your other thread.
Srini
-
Family calendar sync problems - synchronizes only when we add something
My wife and I have a calendar shared on our two iphone6s. IOS is still being updated. We use a shared family calendar we have put all our appointments, events, etc. Also, I added my ICloud email in Microsoft outlook if it makes a difference.
Our problem is that if the person adds an event on their calendar from the Iphone to the family shared calendar, it won't appear on shared calendar to person B THAT IF person B adds an event into the calendar. To give a specific example, the person adds appointment of eye for May 25, person B does not see the appointment of the eye on the calendar shared only two days later, when person B adds a contractor for June 2. As soon as person B click 'Add' to the appointment of the contractor, a notification appears as the person added the appointment of eye - even if the person could have done that hours (or days) there.
In other words, it seems that synchronization on the shared family calendar happens only when you "add" something for the calendar.
Any ideas on how to fix?
If this is not the same across the road, with person b adding event and him 'a' notified to get, then I would start by restoring the network settings to the phone of the person 'b '.
-
Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.
Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.
A few other basic problems you can try things is the following:
Run all Windows updates, install all required service packs, etc.Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.
Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.
Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.
-
HP Envy 17 t battery problem (2nd time to post this problem)
had some problems with my laptop battery. I had to replace the power supply just now because the small plug on the end of the laptop broke. I replaced it with a compatible, but slightly higher output, auto control replacement for HP charger. Shortly after replacing the battery stopped charging when the computer was in. I could charge the battery when the computer was turned off and run at full performance when no battery has been implemented. With the battery, I ran the Diagnosticc f2 twice, once plugged and unplugged once.
The results:
[connected] = diagnosis finished: battery has failed, replace error codea huge string of numbers and letters
[unplugged]] = diagnosis finished: battery calibration required [long error code injection] different error code
I progressed to the calibration, which required the laptop to be plugged and after running for about 15 minutes, the calibration has failed and said a "software ERROR code: [string]" and refused to calibrate it.
I replaced the battery once at the own expense because appearently my warranty (not expired) and even face the charge cord, not cover replicated the issure, which I was unable to find by anyone else in the forums. The battery error has occurred for two batteries.
So I need to know a few things:
(1) is it a hardware problem or software?
(2) is it repairable?
(3) why is this happening?
(4) is any repair covered by my warranty (standard)?
Hey Admiral_B,
Electricity does not exactly that way. Devices don't just "take what they need." The power through the entire notebook not only the battery. The adapter provides power to the laptop directly, it does not first through the battery, the battery is an endpoint like other material.
Lower voltage is safer but can cause performance problems. Higher voltage can damage the equipment.
Think of electricity like water: the voltage is equivalent to the pressure. Amperage of the total volume, or the amount of electricity used. Watts are the speed at which electricity flows.
I'm not trying to sound like I'm an electrician. I understand that electricity is quite complicated, but if you wish you can read more about this here: understanding electric reading-Watts, amps, Volts and Ohms.
Basically, what it boils down to is your laptop and work to ensure that we cover all the bases that we need to use an adapter that is designed for your laptop. The adapter AC - c23 has support for many laptops, but the ENVY 17 t isn't one of them.
You have already replaced the battery and the problem started after the change of the adapter. I would think the process of deductive reasoning tells us that the adapter is the question, or the motherboard. If the motherboard is the problem, it is possible that the question is a coincidence for the moment with the adapter has been replaced, but is more likely to result from the use of a higher output adapter.
I suggest you contact the services options HP support by phone. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.
Thank you.
-
Hibernate problem (watch only underscore flashing upward)
Nice day
I have this problem in my laptop when I Hibernate it, then start again after a while, and then it displays "Windows Recovery" with the logo of Windows, but after that only a blinking nothings and underscore appears then it just restart it by his own if I leave it alone, then report me to some unexpected or stop error.
I would like to ask how can I solve this problem, because I think, this can lead to some other critical errors.
Kind regards
Jean-Sébastien
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offMay need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
Problem with system restore post on Vista update
My Vista PC loses the internet connection so I tried to restore to the last known point of function after uninstalling Norton 360. This has created an error in rstrui.exe (system restore Microsoft Windows has stopped working) Please help! I think this happened to post recent MS update a couple of days.
Hello
Thank you for using the Microsoft Windows Vista Forums.
I will need some additional information to help you best.
O what is the exact error message you get?
O that you reinstall the Norton software before you try to restore your computer?
In the meantime, you can try to restore your computer to a previous state of safe mode.
Try to restore your computer to the previous state of safe mode.
Follow the instructions to start the computer in safe mode.
1 turn on the computer or restart the computer
2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
3. ensure that the safe mode option is selected.
4. press ENTER. The computer then begins to start in safe mode.
Follow the instructions below to restore your computer to a previous state of safe mode.
- Click Start, type system restore in the search box, and then click System Restore in the list programs.
- If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
- In the System Restore dialog box, click Next.
- In the list of restore points, click a restore point created at least a week before the current date, and then click Next.
Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
- Click Finish.
- The computer restarts. The system files and settings are returned to the State they were when the restore point was created.
Check whether the problem is resolved.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Hello
I'm new here and I hope you can help!
System specs
Lenovo T500 (2081-CTO)
CPU: Intel Mobile Core 2 Duo P8600 2.40 GHz
RAM: 6 GB DDR3 PC3-8500 (2 GB + 4 GB Hynix halogen)
BIOS Lenovo: 3.13 - 1.06 (March 2010)
Operating systems: Windows 7, 64 bit
Battery: Yes
Power: 90W installed
Power setting: maximum performance; Max CPU speed: more top [ThinkVantage Power Manager 3.12]
Setting BIOS: Intel SpeedStep disabled; Everest EU 5.50 confirms: C1E & EIST are both: "supported, disabled.
All Lenovo drivers are up to date *.
---
Problem: Base speed is blocked at 1.6Ghz (multiplier x 6.0) and only fluctuates several Mhz from time to time. I think it should be fixed at 2.40 Ghz, I have disabled all the settings save CPU speed.
Basic speed (1.60 Ghz) conforms to:
-Everest Ultimate Edition 5.50
-CPU - Z 64 bit 1.54
-Intel Processor Identification Utility 4.22.20100224
All of these are the @2 P9800. 40 Ghz is clocked at 1.6 Ghz or 1.59 Ghz.
I ran the load/stress test, Super-Pi etc... and obsevered the basic speed - it never changes or is greater than 1.6 Ghz.
Super Pi takes 31 seconds, where landmarks on a normal P8600 2.40 Ghz see the this should be done in 20 years.
I have read several threads in these forums and tried all the things suggested:
Example of Lenovo Forum Thread 1
Example of Lenovo Forum Thread 2
I even tried affecting performance Max CPU speed to "Adaptive", and yet, it does not go beyond 1.6 Ghz.
Can anyone suggest other things I can do to make sure that it is not a problem? I thought I bought a 2.40 GHz, not a 1.6 Ghz.
I have several more months remaining warranty, contact Lenovo to return my CPU? or is it a fault in Lenovo BIOS?
Intel speed step must be enabled. If you read what it says in the bios, if it is off then they processor will not let the State of the minimum speed. This is the case on my T510.
Give it a try.
-
BlackBerry Smartphones Call Log problem - lists only the missed calls
I have the curve 8900 with t-mobile and I'm having the same exact problem that this user has:
http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8900&message.ID=3200
My call log lists only the missed calls (dialed or received calls). He did this for a few weeks now. I received the error message 'exception: java.lang.NullPointerException eception' a few times as well.
I checked all available software updates and I use the most recent software.
Please help me if you can.
Thank you
Mike
I fixed it! It took about an hour on the phone with t-mobile, but we thought about it. For me, the problem was probably a few information corrupted in my call history. I need to delete all the call history, and then it was fine. To do this, you need to install the blackberry desktop manager on your computer if you have not already (be it from the cd that came with the phone or the Web site). Open Fund Manager and connect the blackberry to the computer. Select the backup and restore option. Then, select the advanced option. On the right side of the screen, there will be a list of all the features of the phone. Scroll to phone call logs. It lists the number of records in the phone. All I had to do was remove all records from phone call and it was corrected. Now my lists of newspaper calls dialed, received and missed and I no longer get the error message. I hope it helps you too!
-
Scan with HP Deskjet 3050 a problem - analysis only about a quarter of the page
My HP Deskjet 3050 a wireless print fine with my Mac OS Lion 10.7.3. But whenever I scan something, catches sweep that results from only about a quarter of the page, which swells in size to take to the top of the entire page. (And I am regular sweeping 8 "x 11" documents. ") And I can't zoom in to get the entire page. When I try to change the setting in jpg to PDF utility, to see if that will solve the problem, the utility closes 'unexpectedly' every time.
Hello
First, install the critical update below:
http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmgNow change the settings of the device as follows:
1 open the HP utility and select your device.
2. based on Scan Settings open the "Scan to Computer".
3. click on the tab "scan tasks.
4. Select the shortcut Scan allows to analyze, and then click on edit.
5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
6. in the expanded menu now, open the drop down next to cultures in and set as none.
7. click OK and try to scan.Kind regards
Shlomi
Maybe you are looking for
-
Description of the problem: Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics. Steps to recreate: UEFI: Start the PC in diagnosis system UEFI (F2 at the STATION)Pane controlsOptical driveSequential controlError:
-
Question about the extended international warranty for Qosmio F10
FriendsI bought a Qosmio F10 of UAE UNITED and it came with an international warranty of 3 years and its expiration time, December 12, 2007.I would like to know if someone has purchased an extended international warranty for Toshiba Qosmio F10 model.
-
Walkman NWZ-E354 battery drains quickly
I don't know what is happening, but my walkman has decided that it will charge is no longer the battery correctly. That said the maual, it should take about 6 hours to fully recharge and that worked when I first got the unit out of the box. But now,
-
I need communication controller simple PCI and usb controller drivers
I want drivers for above two controllers model: 15-d103tx product no: G2G48PA #ACJ My os is windows 7 ultimate 32 bit
-
Wierd NAT with AnyConnect client behavior
Hello I have a problem with our customers AnyConnect not being able to access a particular resource that exists on a 3rd party VPN. Both the AnyConnect customers & 3rd Party Site to Site VPN terminate on the external Interface of the ASA. There is a