Scan with HP Deskjet 3050 a problem - analysis only about a quarter of a page

Similar Questions

• Scan with HP Deskjet 3050 a problem - analysis only about a quarter of the page

  My HP Deskjet 3050 a wireless print fine with my Mac OS Lion 10.7.3. But whenever I scan something, catches sweep that results from only about a quarter of the page, which swells in size to take to the top of the entire page. (And I am regular sweeping 8 "x 11" documents. ") And I can't zoom in to get the entire page. When I try to change the setting in jpg to PDF utility, to see if that will solve the problem, the utility closes 'unexpectedly' every time.

  Hello
  First, install the critical update below:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings of the device as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Can't scan with a Deskjet 3050 wireless

  PC system: MB Pro 10.7 running

  Printers: Deskjet 3050 J610 HP inkjet driver 1.3.1

  IP address: 192.168.1.45

  Problem: Deskjet 3050 wireless more prints fine however when I want to scan it just happens to expire with the beachball o ' dead just spinning and spinning.

  I tried "Reset Printing System" remove and reinstall but same situation persists...

  Thanks in advance for any help you may be able to provide.

  OK, let's reset the printing system once more, restart the printer, the Mac and the router.

  If this does not work, there is no likey a software bug.  Let me know how it goes.

• Deskjet 3050 a problem change from USB to wireless

  I got a Deskjet 3050 a printer attached via the USB port of my desktop HP Win7 64 bit for a year and a half. Attempts to convert the USB wireless. Instructions lead me the start--> all programs--> HP--> HP Deskjet 3050 J611 series a--> convert USB wireless.

  But when I open--> series HP Deskjet 3050 a J611, my only choice is:

  Connect a new printer or

  Add new software

  Nothing on the conversion of wireless USB. If I click 'connect a new printer' I have the choice of:

  USB connection

  Connection Ethernet / wireless

  Connect again later

  If I select wireless connection, it tells me to connect the USB cable. It is been connected for more than a year. But the button "Next" is gray and I can't move forward.

  If I select USB connection, it tells me to connect the USB cable. It is been connected for a year. The only choices I have are to return to a screen or check a box that says I'll connect it later, not now. I don't have to check but the 'Skip' button is gray and so I'm stuck again. I tried to turn the printer power off and moving the USB cable to the USB port of different desktop and power on printer again. I tried to reset the default printer on the printer control panel. The software does not believe that the USB is connected. This is the case.

  I pressed the button on the control panel of the printer wireless. It flashes blue.

  I'm usually pretty good with the resolution of this kind of thing, but I'm ready to break this piece of scrap on the ground and dance on his grave. .. .any help would be appreciated. Thank you!

  Hi Julie,.

  Thanks for the reply, sorry for the frustration. Here's what to do to uninstall it, in a more detailed form.

  • Click on the link above to access the driver removal tool.
  • Click on download and run.
  • Click 'Yes' when asked if you want to allow the following program to make changes to the computer.
  • A folder opens, look down and you'll see 'uninstall_l3' - select it.
  • The uninstall is running and restarts your computer.

  Now, it is normal to go forward, and then reinstall the printer.

  I hope this helps you, let me know how it goes!

• HP Deskjet 3050 a: problems scanning

  Hello

  I have a printer HP Deskjet 3050 has.

  I had problems with the scanner immediately: everything that I get from the scan are only black vertical lines in the document. There is no way to make it work. In addition, sometimes it works and sometimes not.
  I have the same problem on Windows Vista, 7 and 8.

  Is there a solution?

  Thank you. (Sorry for my English)

  Hello-

  If the problem persist at this stage, so I recommend doing a factory reset for this product.  I have information about this reset and it will send you a private message.  Please check your Inbox for messages.  Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here

• problem printing with HP deskjet 3050 all in one J610 series

  I have a printer HP deskjet 3050 all-in-one series J610 which I use with Windows Vista Version 6.0 (Build 6006: Service pack 2).  The connection is by USB port.  I have not used the printer for a while, but did all the maintence checks & it's good to go.  When I want to print a letter the only thing that is printed is the e-mail address that is blue in color.  I think the problem is in the settings of the features of the printer.  I can print the letter in gray scale, but it is not easy to read and is not suitable for business relationships.

  I would appreciate help with this problem.  A definition of the terms used in the features of the printer can help me to solve it in myself.

  Thank you

  I had a computer guy watch the printer for me.  It was broken & he just buy a new, he said.  I did it.

  So thanks for trying to help.

• problem scanning with HP Deskjet 3071 e-ALLin a series

  I just set up this printer on my Mac (OS X). When I try to scan, it analyzes only a quarter of a page. I can't anywhere that you can change the settings. Seems to be connected ok, prints ok.

  OK, so using the scan on the printer button, the application that should open on your Mac, it is HP Scan (you can check by looking at the high bar (the bold text on the left side of the Apple).

  Try running the software analysis and not the product to see if you get different results. Go to \Applications\Hewlett-Packard\HP Scan and perform the analysis from here.

  If it's the same result, try some of the following methods:

  1 - Open system, Print & Fax Preferences. Click the Try analysis analysis tab.

  2 - Open Preview (in the applications folder). Click on the file--> import from a Scanner (you may need to first click "Include network devices" in this menu and then return to pick your product).

  Please post your results of the methods above (HP Scan, Print & Fax, and preview).

  Thank you!

• DeskJet 3050 wireless problems

  I have a Deskjet 3050. It worked just find with my old router. My new router, a Linksys E1550, not connect to the printer. I get a message that it connects, but the progress bar freezes at 20%. I tried the WPS automatic and incoming method in the PIN printer in the router. Any ideas I could try? What is the security settings?

  Thank you

  Ned

  Your router to use WPA or WPA2, WEP NO security!

  If this does not work, install your printer by getting the latest software for your printer from the "Support & drivers" link at the top of this page.  When you start the software, make sure that there is no USB cable connected to the printer.

  Choose "wireless" as installation type and follow the instructions.

• How to print without margins/marginless/full page on 8.5x11inch with HP Deskjet 3050 J610 letter paper?

  Hi, I tried to print a PNG image in painting, I did on my HP Deskjet 3050 J610 without lines or borders. This is a fully colored picture and I'm trying to get it to reach all ends of the page, so I can print without ANY white on the page at all. Thanks for the help!

  Hello

  The printer is not supported boderless at all.

  Kind regards.

• Cannot print prints borderless with HP Deskjet 3050 J610 Series

  I have a HP Deskjet 3050 J610 Series and cannot understand how printer borderless prints.  I downloaded the newest and just reinstalled driver and can't find no option for what "without borders".   My printer cannot without borders? Or any type of work around?

  Hello

  Sorry, but on this printer, you cannot print without borders...

• Scan with a Deskjet 3051 has

  Hello

  I'm new to this forum so forgive me if I'm been negligent.  I am operating Windows XP. Yes, I'm an old lady on an old computer. In January, I bought a Deskjet 3051 a because my old Scanner HP, finally the waived.  I have been using for several months, but impatient whenever I analysis.

  Is there a place where I can say the 3051 where I want the scan go.  One might think that the Office was a logical place, but mine sends it in a records office where I put the photos.  I read the book and instructions from "the printer scan" and it just says: "locate the image on your computer" is there a way to tell him where to go - politely of course.

  Michaines

  Hello Michaines

  When you load the scan software, you will notice a button Advanced settings... . By pressing will open another window that has 3 tabs: Scan, fileand Destination. The Destination tab has options to change the Base file name ofthe save locationand what to do After the Scan. If Windows Explorer launch is checked that once the scan is done with the scan file will open automatically for you.

  Please refer to the screenshot below.

  

• CH376A: Windows 10 compatibility with HP Deskjet 3050 J610a

  I'm booked for the update of Windows 10 for my laptop the 29th of this month and want to know if my all in one printer will work with this update or how to get the HP fix or update and my printer cannot work with Windows 10. My laptop is a Compaq Presario CQ60 and is running Windows 7-32 bit. I need to know if there won't be an upgrade for my printer before too long if possible if I cancel the booking of Windows 10 before the 28th or it automatically updates my system for Windows 10 29.

  As soon as the final version of Windows 10 is released, see the HP web site for updated drivers.

• Scan & Capture with a J610, 3050

  Is there a 'conflict' running 8 windows scanning and Capture app as well as software own printers?

  Thank you

  Hey Grumpy46,

  Avoid any conflict between the use of scanning and Capture application for scanning as well as to have the full functionality for the Deskjet 3050 software.

  The application of scanning and Capture is a standalone package outside the complete software of scanning for the Deskjet 3050 J610a features.  I hope this helps.

• DeskJet 3050 a: Deskjet 3050 a prints blur sometimes, new drivers, alignments, no cleaning, no joy.

  If I print a test page for the printer it comes out perfect.

  If I print a test page for Windows7 it comes out perfect.

  If I right click and highlight text when it is on the internet and press print it comes out blurry.

  Print an e-mail comes out blurry, even as wordpad.

  Basically, but no test pages come out blurry, unless I do a google search and find a random test page not associated with Win7 or HP which will be blurred.

  I tried new drivers, ink cartridges are fairly new, but they were good job and forwards the problem.

  I did several cleanings, alignments, not troubleshooting, no joy.

  He has been connected to the same USB port, worked many years.

  No updates of windows 7 or changes.

  No matter whether this printer is default, I also have a Canon iP2600 and it works perfectly, it was also in the years of system, once again no change, I can't see that would not cause this problem.  There is probably a change, but it is over my head as to what.

  Thank you

  Hi @bobscloud,

  Welcome to the Forums of HP Support!

  I see you are having problems printing with HP Deskjet 3050 a printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating, it would be for you. You mentioned that you uninstall and reinstall the HP software. Looks like the drivers are corrupt, it is necessary to clean your system and try to reinstall again.

  Is the Canon iP2600 that printer as plugged in USB?

  You say that ' no updates Windows 7 or changes ", you have automatic updates is turned off? Please make sure that your Windows updates are up-to-date.

  When you install a USB printer, it is recommended that you disconnect the other USB printers during installation. In this way, the computer does not confuse the two and installs the correct driver.

  You unplug the Canon before reinstalling the HP Deskjet printer?

  I suggest to try the following steps in the following order for best results.

  • Utility of Microsoft Ms difficulty, diagnose and automatically fix the problems of the printer and printing.
  • How to troubleshoot Windows Installer errors.
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  If the problem persists, I will try this solution.

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
   
  If the problem is not resolved, I suggest that you clear the money printing system.
  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
   
  c:\windows\system32\spool\drivers\w32X86
   
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
   
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
   
  If there are any keys other than those listed above, follow these steps:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
   
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
   
  If there are any keys other than those listed above, follow these steps to remove them:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  If all else fails, I create a new administrator account and try again, difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Error scanning WIA for Deskjet Ink Advantage 2060

  I can't scan with a Deskjet Ink Advantage 2060.

  HP Print and Scan doctor said that the error is the Windows WIA. It says HP TWain scanning and other tests are fine, not that I know how to do a TWAIN scan with it.

  Reading another post, I can confirm that "detecting hardware Kernel ', 'Windows Image Acquisition (WIA)' and 'RPC Remote Procedure Call ()' is running in automatic mode in the services list.

  My printer reacts to an application to scan and seems likely to be an analysis sometimes, but the software seems to act as if it receives nothing back from the scanner?

  I've uninstalled and reinstalled all the drivers twice without success.

  Reading http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/cant-get-HP-Office-jet-to-scan/m-p/1785313/highlight/true#M41216

  I tried another USB on my computer, and hey presto! He works all of a sudden!

  Looks like the HP scanners cannot handle all USB connectors. Odd.