problem adding more then 3 internal networks to VM

We are trying to run the default workflow

Liberary-> vCloudDirector-> VAPP-> virtual machine-> NETWORK-> add a NETWORK card

in a loop for the addition of 8 networks internal, but it gives the following exception after crating of 3 internal networks

"All possible network adapter addresses are in use (the dynamic Script Module name: calculateNextNetworkCardAddress #12).

We have the version 8 material vm and we are guess, add 10 networks.

you will appreciate your help in this matter

Serach for action calculateNextNetworkAddress

Change the following

var availableAddresses = new Array('0','1','2','3');

In something like this:

var availableAddresses = new Array('0','1','2','3','4','5','6','7','8','9');

And try again.

Christophe.

Tags: VMware

Similar Questions

Problems in connection to the mobile network after upgrading to iOS 9.2.1

Upgrade to iOS 9.2.1 Thursday last on my iPhone 5. Mobile connectivity random but frequent problems faced since then - just lose network connectivity and the phone displays "No. Service" for long periods. Are gone to lift (Airtel, India) and according to them they also received 100 + complaints of users after they upgraded to iOS 9.2.1

Amit,

I am also facing the same issue... its really frustrating... in my case is not at all happened to the network... do not know if everyone from apple to do anything

Problem more then 16 output waveforms

Hello, I made a program to 30 waveforms output, but when I try more then 16 output signals, the program show the internal software error error occurred in the MIO software. Please contact the support of National Instruments. I use two NI 9264.

Please help me
Thanks for the support

What cDAQ chassis do you use? The cDAQ-9172 supports only 16 hardware channels timed, but the other cDAQ chassis do not have a limit unless you perform an on-board regeneration which you are not.

What DAQmx version you have installed?

You should never get this internal software error is a problem with DAQmx. I don't have two 9264 s in my office at the very, but I can try again later to see whence the error.

Create a simple internal network between two or more virtual machines

Hello guys,.
I just wanted to ask how to create an internal network between several virtual machines without the host must be a part of.
I don't want that your network has a NAT, but I want to HOST a part of another network.

I tried the changes on network cards, but does not work...
Obviously with VMware Workstation 8

Yes, your "Virtual Machine settings" - screenshot #1 - Select VMnet2 (for example). Do this for each customer that you want on this private network, "Guest-only. Note that you need to configure the network settings on each client within each guest OS; or have a guest to be a server with a dhcp server running that other clients can obtain an IP address configuration of.

Message 'internal network card has been disabled to optimize the battery life' will not go away.

Whenever I have unplug my laptop, the message "your internal network card has been disabled to optimize battery life.". Lately, the message doesn't go away, even when I plug my laptop back in. When I move my cursor over the message, it is an icon of mouse 'pending' for me and I am unable to click on it. I believe that this is due to a virus or accidentally modify me a file, but I don't know which and I don't know how to get rid of this problem.

I knew it was a Dell and find out how to disable the message (which is supposed to appear), but do not know why, when you connect what you are disconnect, the message does not go far - she used to go? It seems to be a useful informational message and not an error message.

I can't seem to find information on your system on the Dell WEB site to check your network drivers, so I hope someone will have the magic bullet for your situation. There are the user forums on the Dell WEB site where you could ask your question to be read by all people of Dell.

If you think that malicious software might be involved, I would start with this:

Download, install, update and do a full scan with these free malware detection programs:

Malwarebytes (MMFA): http://malwarebytes.org/

SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

They can be uninstalled later if you wish.

The scans by operating clean, then to solve any problems.

Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

When I install IE9, my printer Canon wireless stop working and more shows on my network

When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

Hello
- You receive an error message when printing?
- What is the model of the printer?
- Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?
If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

You can also follow these links:

Printer in Windows problems

http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

Solve printer problems

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

Network printer problems

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

There is more than one active network connection on your computer

I have two ISP with 2 different IP addresses of course. With one I connect via cable, the other is wireless. Until a couple of days, I'd keep the Wi - Fi turned off on the front of the case, to allow the laptop to connect only to the cable connection.
Some sites were not loading, indicating problems with DNS resolution. I checked for possible reasons online. I tried to connect to these sites using a webproxy and it worked, so I thought I would try the wireless connection. I turned on and sites would be load normally. However, when I checked my ISP number this shows that the active connection cable one.
I hesitated to leave the switch turned on, but in order to leave these sites load, I thought I had no other choice. Needless to say that I am not notified at all or with the networks or computers.
Everything seemed to work fine until the wireless connection has started having problems anyway, it stopped working (ISP issues), so stopped at new loading sites. I tried troubleshooting it and he said: "it has more than one active network connection on your computer" and suggested I would disconnect them. Naturally, I unplugged the wireless connection. Problems: I can not load the sites that seem to need to have wireless to turn on. Note that it does not need it to be active, only to have this switch.
Please let me know if there is anything I can do to correct this inability to connect to the servers of some sites without the need to have that switch on. If there is no explanation for this behavior, which does not make sense. Again, I know nothing about networks or computers, forgive my ignorance!
I use Windows 7 Home Premium x 64, my laptop is a Vaio. This happens on all my browsers and sites that have stopped loading were load normally when I 1st turned on the laptop the same day. To later that day there some sites stopped to load, which made me think it was a matter of site. Then I realized that it was not connect to twitter, which was not down, so I realized it was my problem.

It looks at when you use the wired connection THAT DNS has failed.

In order to clarify the names of web sites means absolutely nothing to a computer in itself, www.google.com is completely useless. All comms on a network revolves around the IP addresses and the DNS service is a process by which the dedicated servers which addresses are known can tell your PC what is the address of a Web site. For some reason any on the wired connection your PC isn't getting the address to soundcloud.com.

In family situations more of a PC it gets the IP of the router settings, of course I don't know if this is true in your case. If you open a command prompt and run ipconfig/all, paste the result here and we can check. This would include which server DNS to use that, as I said is normally the router. There are actually millions of internet addresses, and your router could not store them to remedy this it forwards a request for an address of DNS servers listed in its own configuration of IP internet side.

If you can connect to the router and look its DSL or WAN configuration, you should find at least one or two DNS servers. Take note of them. If you can't connect to the router then look at the website from your ISP for their parameters.

On your computer, go to the network control and Internet\Network connections, right-click on your wired card, and select Properties. Double-click Internet version 4 Protocol. In normal use get it 2... buttons should be selected, are they?

If you change only the down one to use the following DNS server address and enter the fields, addresses that you got the router. Click OK twice, but leave the window network connections open as you need.

Now, try to get your site into a problem. If you can then the problem is with your router. Instead of asking the router address you have bypassed this stage and went on the server, your router is configured to use.

If you are still unable to the site then the problem is further down and your router may be OK. Then go back to where you set the addresses DNS and replace those that you got the router and turnkey 8.8.8.8 primary DNS server address and 8.8.4.4 in another address, OK once again two times and then try again the site. These 2 addresses are own Google public DNS servers and should work.

If the ISP provided the router they should replace it. Explain what is the problem and the results of these tests, although I have no doubt that they insist on their own checks before accepting.

AnyConnect ASA cannot access internet or internal network

After connecting through the client anyconnect 2.5, I can't access to my internal network or on the internet.

My host has address ip of 10.2.2.1/24 & gw:10.2.2.2

Here is the config

ASA Version 8.2 (5)

!

names of

name 172.16.1.200 EOCVLAN198 EOC VLAN 198 description

DNS-guard

!

interface Ethernet0/0

Description of the EOCATT7200-G0/2

switchport access vlan 2

!

interface Ethernet0/1

Description of EOC-Inside

switchport access vlan 198

!

!

interface Vlan1

Shutdown

No nameif

security-level 100

no ip address

!

interface Vlan2

nameif outside

security-level 0

IP 1.21.24.23 255.255.255.248

!

interface Vlan198

nameif inside

security-level 100

IP 172.16.1.1 255.255.255.0

!

passive FTP mode

clock timezone PST - 8

clock summer-time recurring PDT

DNS server-group DefaultDNS

domain riversideca.gov

outside_acl list extended access permit icmp any interface inside

outside_acl of access allowed any ip an extended list

inside_acl list extended access permit icmp any external interface

inside_acl extended access list allow interface icmp outside of any

inside_acl of access allowed any ip an extended list

access extensive list ip 172.16.1.0 inside_acl allow 255.255.255.0 any

inside_acl to access ip 10.0.0.0 scope list allow 255.0.0.0 all

access-list SHEEP extended ip 10.10.10.0 allow 255.255.255.0 10.2.2.0 255.255.255.0

access-list extended SHEEP allowed ip 10.2.2.0 255.255.255.0 10.10.10.0 255.255.255.0

IP 10.10.86.0 allow Access - list extended SHEEP 255.255.255.0 10.2.2.0 255.255.255.0

access-list extended SHEEP allowed ip 10.2.2.0 255.255.255.0 10.10.86.0 255.255.255.0

IP 10.80.1.0 allow Access - list extended SHEEP 255.255.255.0 10.2.2.0 255.255.255.0

tunnel of splitting allowed access list standard 172.16.1.0 255.255.255.0

allow a standard split-smart access-list

mask 10.2.2.1 - 10.2.2.50 255.255.255.0 IP local pool SSLClientPool

ASDM image disk0: / asdm - 649.bin

Global 1 interface (outside)

NAT (inside) 0 access-list SHEEP

NAT (inside) 1 172.16.1.0 255.255.255.0

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group outside_acl in interface outside

inside_acl access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 1.21.24.23 1

Route inside 10.0.0.0 255.0.0.0 EOCVLAN198 1

Route inside 192.168.1.0 255.255.255.0 EOCVLAN198 1

Route inside 192.168.100.0 255.255.255.0 EOCVLAN198 1

Route inside 192.168.211.0 255.255.255.0 EOCVLAN198 1

WebVPN

allow outside

SVC disk0:/anyconnect-dart-win-2.5.3055-k9.pkg 1 image

enable SVC

tunnel-group-list activate

internal SSLCLientPolicy group strategy

attributes of Group Policy SSLCLientPolicy

value of 10.10.86.128 DNS server 10.10.86.129

VPN-tunnel-Protocol svc webvpn

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list split-smart value

yourname.tld value by default-field

the address value SSLClientPool pools

test P4ttSyrm33SV8TYp encrypted privilege 15 password username

username admin privilege 15 encrypted password fOGXfuUK21gWxwO6

type tunnel-group SSLClientProfile remote access

attributes global-tunnel-group SSLClientProfile

Group Policy - by default-SSLCLientPolicy

tunnel-group SSLClientProfile webvpn-attributes

enable EOCSSL group-alias

!

Global class-card class

class-map IPS

my class-map-ips-class

class-map test1

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

inspect the amp-ipsec

inspect the http

inspect the pptp

inspect the icmp

Global category

IPS inline fail-closed

class class by default

Decrement-ttl connection set

my-ips-policy policy-map

My ips-category

IPS overcrowding relief

!

global service-policy global_policy

p

ciscoasa # view the journal

Syslog logging: enabled

August 2, 2012 21:34:03: % ASA-6-302014: TCP connection disassembly 60662 for outside:10.2.2.1/62706 to outside:74.125.224.228/443 duration 0: 00:00 0 stream bytes is a loopback (test)

August 2, 2012 21:34:09: % ASA-6-302015: built connection UDP incoming 60664 for outside:10.2.2.1/49768 (10.2.2.1/49768) at inside:10.10.86.128/53 (10.10.86.128/53) (test)

August 2, 2012 21:34:09: % ASA-6-302014: TCP connection disassembly 60665 for outside:10.2.2.1/62706 to outside:74.125.224.228/443 duration 0: 00:00 0 stream bytes is a loopback (test)

August 2, 2012 21:34:10: % ASA-6-302015: built connection UDP incoming 60666 for outside:10.2.2.1/49768 (10.2.2.1/49768) at inside:10.10.86.129/53 (10.10.86.129/53) (test)

August 2, 2012 21:34:11: % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for tcp src outside:10.2.2.1/62708 dst inside:192.248.248.120/443 refused due to path failure reverse that of NAT

August 2, 2012 21:34:21: % ASA-6-302015: built connection UDP incoming 60668 for outside:10.2.2.1/50715 (10.2.2.1/50715) at inside:10.10.86.128/53 (10.10.86.128/53) (test)

August 2, 2012 21:34:21: % ASA-6-302015: built connection UDP incoming 60669 for outside:10.2.2.1/64333 (10.2.2.1/64333) at inside:10.10.86.128/53 (10.10.86.128/53) (test)

August 2, 2012 21:34:22: % ASA-6-302015: built connection UDP incoming 60670 for outside:10.2.2.1/50715 (10.2.2.1/50715) at inside:10.10.86.129/53 (10.10.86.129/53) (test)

August 2, 2012 21:34:22: % ASA-6-302016: UDP connection disassembly 60474 for outside:10.2.2.1/50367 to inside:10.10.86.128/53 duration 0:02:01 40 bytes (test)

August 2, 2012 21:34:22: % ASA-6-302016: UDP connection disassembly 60475 for outside:10.2.2.1/60325 to inside:10.10.86.128/53 duration 0:02:01 46 bytes (test)

August 2, 2012 21:34:22: % ASA-6-302015: built connection UDP incoming 60671 for outside:10.2.2.1/64333 (10.2.2.1/64333) at inside:10.10.86.129/53 (10.10.86.129/53) (test)

August 2, 2012 21:34:22: % ASA-6-302014: TCP connection disassembly 60672 for outside:10.2.2.1/62713 to outside:74.125.224.228/443 duration 0: 00:00 0 stream bytes is a loopback (test)

August 2, 2012 21:34:23: % ASA-6-302016: UDP connection disassembly 60477 for outside:10.2.2.1/50367 to inside:10.10.86.129/53 duration 0:02:01 40 bytes (test)

August 2, 2012 21:34:23: % ASA-6-302016: UDP connection disassembly 60479 for outside:10.2.2.1/60325 to inside:10.10.86.129/53 duration 0:02:01 46 bytes (test)

ciscoasa # display vpn-sessiondb svc

Session type: SVC

User name: test index: 21

10.2.2.1 assigned IP: public IP address: 76.95.186.82

Protocol: Clientless SSL-Tunnel-DTLS-Tunnel

License: SSL VPN

Encryption: AES128 RC4 hash: SHA1

TX Bytes: 13486 bytes Rx: 136791

Group Policy: Group SSLCLientPolicy Tunnel: SSLClientProfile

Connect time: 21:26:21 PDT Thursday, August 2, 2012

Duration: 0: 00: 08:00

Inactivity: 0 h: 00 m: 00s

Result of the NAC: unknown

Map VLANS: VLAN n/a: no

Tunnel of Split ACL is incorrect, you must add the internal LAN subnets, not pool VPN subnets and also add the correct ACL SHEEP.

If you try to access the 172.16.1.0/24 subnet, and then add the following code:

access-list extended SHEEP permit ip 172.16.1.0 255.255.255.0 10.2.2.0 255.255.255.0

Then the distribution next tunnel ACL:

list of access split-chip standard permit ip 172.16.1.0 255.255.255.0

Finally, try to see if you can ping 172.16.1.200 after adding the above.

Error message is "There is more than one active network connection on your computer"

Original title: barely internet connection

Sometimes I can get on the internet, but most of the time not. After some troubleshooting I get a message read 'your computer seems to be configured but correctily the device or resource (www.microsoft.com) does not' after continuing to shoot badly today I received this message: "there is more than one active network connection on your computer. If any of these connections are not configured properly you may not be able to access the Web site, device or resource (isearch abg.com) and the following message: "There is more than one active network connection on your computer" I don't know what to do with this information.

Hello

Welcome to the community Microsoft and thanks for posting the question.

According to the description, it looks that you are having problems with the Internet connection.

Perform the steps mentioned below and cehck.

a: Go in Control Panel > network.

b: Then click on network and sharing Center

c: Then click on the change adapter settings on the left hand side
d: Right-click on the network connection , and then select Properties.

e : select Internet protocol version 4 (TCP/IPv4)
f: Click on the Properties button
g: click the advance button
h: uncheck the option which reads 'use the gateway on the remote network' in the ip settings tab.

Meet us if you encounter any problems with the network connection or any other problem of Windows, and I'd be happy to help you.

Good day!

Hope this information helps.

[Q] create an internal network using Vmware 6.5

I have the following two images:
1 image: Ubuntu (Image)
NIC 1: connected in bridged mode.
NIC 2: I want this NETWORK adapter to be connected to a different network called "local".
Image 2: (NO OS installed, again)
NIC 1: I want this NETWORK adapter to be connected to a different network called 'local', and the MAC address is AABBCCDDEEFF
In VirtualBox I can connect to the internal network and name, I can also change the MAC address of the Vimage before it starts.
Is it possible to do using VMW 6.5?
Thank you very much

NIC 1: connected in bridged mode.

NIC 2: I want this NETWORK adapter to be connected to a different network called "local".

Use only the 'Home' network It is just a private network for virtual machines, and they can communicate with the host and other virtual machines connected to this network.

I suppose that the net result is that this specific virtual machine is a gateway to some form.

NIC 1: I want this NETWORK adapter to be connected to a different network called 'local', and the MAC address is AABBCCDDEEFF

So, the question will be if the NIC2 of an Image and NIC1 of two images are on the same network? If so, then just the NIC of Image value only two host as well.

If two Image must have it's own personal space, then you need to activate another host of the network alone. I think you can do this under the Publisher Network (Menu Edition or the Start Menu) and then activate a new network only host on a specific VMNet. Once you have a new network activate (say VMnet5), then the value of this "Custom" and the VMNet5 virtual machine NIC.

NOTE: The MAC address is generated the first time that a virtual machine is started after the creation, so it is not in conflict with other virtual machines on the same system. I wouldn't change it, but you can see in the VMX via Nano/VI or Notepad file.

br >
Kind regards

EvilOne

VMware vExpert 2009

NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

How can I configure a new TimeCapsule for an existing network without having to activate the internal networks?

I tried to go in advance and choose "Add TimeCapsule to the existing network", but it keeps defaulting to 'add a new network '.

without having to activate the internal networks?

"Add TimeCapsule to the existing network.

You cannot add a TC in an existing network, if there is.

You must configure the TC for the network.

It keeps default back to "add a new network.

So, it's OK... The TC is part of an existing network or makes a new.

You must connect to the TC network... either wireless or ethernet.

However, you can manually configure the TC simply plug ethernet for example.

See, cable using Time Capsule for Mac for backup only.

The same can be done for the wireless... but a TC is really the bad device for backups if you don't have a network... It's cheaper, faster and more reliable by using a USB key.

Replace/upgrade my router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in background.

Original title: connect/disconnect sounds in the background

I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes. It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that. I can't find any evidence of the old router on the computer anyway. I hope you can help me!

Hi Danielle65,

You can try the following steps and check if it helps.

Method 1:

You can also perform a clean boot and check if it helps.

A clean boot to check if startup item or services to third-party application is causing this issue.

You can read the following article to put the computer in a clean boot:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Note: Make sure that you put the computer to a Normal startup once you are finished.

Method 2:

You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.

Open event viewer

What are the information contained in the logs of the event (Event Viewer)

Cisco ASA 5505 VPN L2TP cannot access the internal network

Hello

I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.

Can you jhelp me to find the problem?

I have Cisco ASA:

within the network - 192.168.1.0

VPN - 192.168.168.0 network

I have the router to 192.168.1.2 and I cannot ping or access this router.

Here is my config:

ASA Version 8.4 (3)

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP 198.X.X.A 255.255.255.248

!

passive FTP mode

permit same-security-traffic intra-interface

the net-all purpose network

subnet 0.0.0.0 0.0.0.0

network vpn_local object

192.168.168.0 subnet 255.255.255.0

network inside_nw object

subnet 192.168.1.0 255.255.255.0

outside_access_in list extended access permit icmp any any echo response

outside_access_in list extended access deny ip any any newspaper

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool sales_addresses 192.168.168.1 - 192.168.168.254

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

NAT dynamic interface of net-all source (indoor, outdoor)

NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local

NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search

!

network vpn_local object

dynamic NAT interface (outdoors, outdoor)

network inside_nw object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

AAA authentication enable LOCAL console

the ssh LOCAL console AAA authentication

AAA authentication http LOCAL console

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac

transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode

Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1

card crypto 20-isakmp ipsec vpn Dynamics dyno

vpn outside crypto map interface

Crypto isakmp nat-traversal 3600

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH timeout 30

Console timeout 0

management-access inside

dhcpd address 192.168.1.5 - 192.168.1.132 inside

dhcpd dns 75.75.75.75 76.76.76.76 interface inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal sales_policy group policy

attributes of the strategy of group sales_policy

Server DNS 75.75.75.75 value 76.76.76.76

Protocol-tunnel-VPN l2tp ipsec

user name-

user name-

attributes global-tunnel-group DefaultRAGroup

address sales_addresses pool

Group Policy - by default-sales_policy

IPSec-attributes tunnel-group DefaultRAGroup

IKEv1 pre-shared-key *.

tunnel-group DefaultRAGroup ppp-attributes

ms-chap-v2 authentication

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13

: end

Thanks for your help.

You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:

Policy-map global_policy

class inspection_default

inspect the icmp

--

Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

ASA 5505 - remote access VPN to access various internal networks

Hi all

A customer has an ASA 5505 with a remote access vpn. They are moving their internal network to a new regime and that you would be the users who come on the vpn to access the existing and new networks. Currently can only access the existing. When users connect to access remote vpn, the asa gave them the address 192.168.199.x. The current internal network is 200.190.1.x and that they would reach their new network of 10.120.110.x.

Here is the config:

:

ASA Version 8.2 (5)

!

ciscoasa hostname

enable encrypted password xxx

XXX encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 200.190.1.15 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address 255.255.255.0 xxxxxxx

!

exec banner the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED

connection of the banner the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED

banner asdm the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED

passive FTP mode

access extensive list ip 200.190.1.0 inside_access_in allow 255.255.255.0 any

outside_access_in list extended access permit icmp any external interface

access extensive list ip 192.168.199.0 outside_access_in allow 255.255.255.192 host 10.120.110.0

Standard access list MD_IPSEC_Tun_Gp_splitTunnelAcl allow 200.190.1.0 255.255.255.0

MD_IPSEC_Tun_Gp_splitTunnelAcl list standard access allowed host 10.120.110.0

access extensive list ip 200.190.1.0 inside_nat0_outbound allow 255.255.255.0 192.168.199.0 255.255.255.192

inside_nat0_outbound list extended access allowed host ip 10.120.110.0 192.168.199.0 255.255.255.192

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

mask 192.168.199.10 - 192.168.199.50 255.255.255.0 IP local pool Remote_IPSEC_VPN_Pool

IP verify reverse path to the outside interface

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ICMP allow all outside

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 200.190.1.0 255.255.255.0

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 190.213.43.1 1

Route inside 10.120.110.0 255.255.255.0 200.190.1.50 1

Route inside 192.168.50.0 255.255.255.0 200.190.1.56 1

Route inside 192.168.60.0 255.255.255.0 200.190.1.56 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

http server enable 10443

http server idle-timeout 5

Server of http session-timeout 30

HTTP 200.190.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

Crypto ca trustpoint _SmartCallHome_ServerCA

Configure CRL

Crypto ca certificate chain _SmartCallHome_ServerCA

certificate ca 6ecc7aa5a7032009b8cebcf4e952d491

(omitted)

quit smoking

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Crypto isakmp nat-traversal 3600

Telnet timeout 5

SSH 200.190.1.0 255.255.255.0 inside

SSH timeout 5

SSH version 2

Console timeout 5

dhcpd outside auto_config

!

a basic threat threat detection

scanning-threat shun threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow outside

internal MD_SSL_Gp_Pol group strategy

attributes of Group Policy MD_SSL_Gp_Pol

VPN-tunnel-Protocol webvpn

WebVPN

list of URLS no

disable the port forward

hidden actions no

disable file entry

exploration of the disable files

disable the input URL

internal MD_IPSEC_Tun_Gp group strategy

attributes of Group Policy MD_IPSEC_Tun_Gp

value of banner welcome to remote VPN

VPN - connections 1

VPN-idle-timeout 5

Protocol-tunnel-VPN IPSec webvpn

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list MD_IPSEC_Tun_Gp_splitTunnelAcl

the address value Remote_IPSEC_VPN_Pool pools

WebVPN

value of the RDP URL-list

attributes of username (omitted)

VPN-group-policy MD_IPSEC_Tun_Gp

type of remote access service

type tunnel-group MD_SSL_Profile remote access

attributes global-tunnel-group MD_SSL_Profile

Group Policy - by default-MD_SSL_Gp_Pol

type tunnel-group MD_IPSEC_Tun_Gp remote access

attributes global-tunnel-group MD_IPSEC_Tun_Gp

address pool Remote_IPSEC_VPN_Pool

Group Policy - by default-MD_IPSEC_Tun_Gp

IPSec-attributes tunnel-group MD_IPSEC_Tun_Gp

pre-shared key *.

!

!

context of prompt hostname

: end

The following ACL and NAT exemption ACL split tunnel is incorrect:

MD_IPSEC_Tun_Gp_splitTunnelAcl list standard access allowed host 10.120.110.0

inside_nat0_outbound list extended access allowed host ip 10.120.110.0 192.168.199.0 255.255.255.192

It should have been:

Standard access list MD_IPSEC_Tun_Gp_splitTunnelAcl allow 10.120.110.0 255.255.255.0

access extensive list ip 10.120.110.0 inside_nat0_outbound allow 255.255.255.0 192.168.199.0 255.255.255.192

Then 'clear xlate' and reconnect with the VPN Client.

Hope that helps.

AnyConnect users can access internal network

Hello!

Just sat up a new Anyconnect VPN solution for a customer. It works almost perfect.

Anyconnect users can reach the internal network storage. The anyconnect users can access the internet, but nothing on the network internal.

(Deleted all the passwords and public IP addresses)

ASA 4,0000 Version 1

!

ciscoasa hostname

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.9.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address

!

passive FTP mode

DNS domain-lookup outside

DNS server-group DefaultDNS

Server name 213.80.98.2

Server name 213.80.101.3

network obj_any object

subnet 0.0.0.0 0.0.0.0

access-list SHEEP extended ip 192.168.9.0 allow 255.255.255.0 192.168.9.0 255.255.255.0

AnyConnect_Client_Local_Print deny ip extended access list a whole

AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

pager lines 24

Enable logging

logging of debug asdm

Within 1500 MTU

Outside 1500 MTU

mask 192.168.9.50 - 192.168.9.80 255.255.255.0 IP local pool SSLClientPool

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

NAT (inside, outside) source Dynamics one interface

!

network obj_any object

NAT dynamic interface (indoor, outdoor)

Route outside 0.0.0.0 0.0.0.0 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

AAA authentication enable LOCAL console

AAA authentication http LOCAL console

LOCAL AAA authentication serial console

the ssh LOCAL console AAA authentication

AAA authentication LOCAL telnet console

Enable http server

http 192.168.9.0 255.255.255.0 inside

http 0.0.0.0 0.0.0.0 inside

http 0.0.0.0 0.0.0.0 outdoors

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Telnet timeout 5

SSH timeout 5

SSH group dh-Group1-sha1 key exchange

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 192.168.9.2 - 192.168.9.33 inside

dhcpd ip interface 192.168.9.1 option 3 inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow outside

AnyConnect image disk0:/anyconnect-win-2.5.3046-k9.pkg 1

AnyConnect enable

tunnel-group-list activate

internal SSLClitentPolicy group strategy

internal SSLClientPolicy group strategy

attributes of Group Policy SSLClientPolicy

value of server DNS 192.168.9.5

client ssl-VPN-tunnel-Protocol

the address value SSLClientPool pools

attributes of Group Policy DfltGrpPolicy

VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client

VPN Tunnel-group type remote access

type tunnel-group SSLClientProfile remote access

attributes global-tunnel-group SSLClientProfile

Group Policy - by default-SSLClientPolicy

tunnel-group SSLClientProfile webvpn-attributes

enable SSLVPNClient group-alias

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:6a58e90dc61dfbf7ba15e059e5931609

: end

Looks like you got the permit vpn sysopt disable to enable:

Sysopt connection permit VPN

Also remove the dynamic NAT depending on whether you have already configured under the NAT object:

No source (indoor, outdoor) nat Dynamics one interface

Then 'clear xlate' once again and let us know if it works now.

problem adding more then 3 internal networks to VM

Similar Questions

without having to activate the internal networks?

Maybe you are looking for