Problem "Multicam new Clip.

Similar Questions

• When I watch a news clip or anything this either with his stops and a few minutes later she does it again.

  When I watch a news clip or anything this either with his stops and a few minutes later she does it again. Can someone help me with this problem. I just watch something unless it is interrupted.

  Hi suzyra,

   
  1. What is the operating system installed on your computer?
  2 are watching you the video online?
  3. in the affirmative, you use Internet Explorer to watch videos online?
  4. What is the version of Internet Explorer installed on your computer?
  5 are you facing this problem with any particular Web site?
   
  I suggest that you follow the steps in the link and then check if it helps.
  The video problems with Internet Explorer

• 128 - GB MicroSD card does not work with the new Clip +.

  My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

  Treats quick closing:

  The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

  A 64 GB card format works even without any problem.

  I tried to update the media in MTP and MSC mode; the problem is the same in both.

  There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

  Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

  HM.  Looks like to run CHKDSK /F on the map the problem resolved!

• New Clip Zip work strangely - music cuts in and out

  My apologies if this is covered elsewhere - I looked through the forums and does not see an answer to this question.

  I bought a new Zip Clip for one of my children.  After updating the firmware to version, 01.01.21 and loading mp3s mp3s are cutting in and out intermittently.  The sounds of the music very well, then silence for half a second or more, then back to the music.

  I thought that maybe the headphones, so I tried using an external speaker, she got the same results.  I tried to play the radio, which doesn't seem to have the same problem - she has played very well for about an hour and is not having the same problem.

  I tried a corner the headphone / speaker taken firm decision, but that does not solve the problem either.

  Any suggestions?  This could be a firmware issue?  Headphone Jack?  Or could I just have a bad unit and you have to put it back?

  Thank you

  A possibility, believe it or not:

  The headphone jack of new Clips can be incredibly tight, to the point that a new user can be afraid that he or she will break the player the first time.  Is it possible that the headphone jack is not in all the way?  It relaxes to a 'normal' level after an hour or two.

  Otherwise, you are sure that the music files are OK and in a format like the Clip?  Have you tried the files on another material and are they OK?

• All new Clip +: telephone jack is bad and terribly his clips (?)

  I just received in the mail a new Sansa Clip + (4 GB) of buy.com (Rakuten, these days) and there are two problems:

  1 caps mini phone (I tried 2 of them) do not correctly enter the clamp making. The plug can be inserted, but it feels too big (too much friction), and there is no 'click' to tell me that it is in the right place. It works, but there is something obviously wrong with the plug.

  2. when the volume is higher that about 2/3 of the range upward, the music suddenly stops and is replaced by a repetitive sound funny, very non musical. Looks a little harsh clipping takes place.

  This is my 2nd of these players. I received this 2nd one because the 1st has problems with his home-fixed up-volume control, and I decided that I needed a backup. The mini taken which does not fit in the new Clip + fits properly in the 1st.

  Suggestions would be appreciated.

  You are right! I had already applied a lot more than a little force to get the connected plug, but do many and many times this morning has finally led the 'click' I was looking for, and now the God awful clipping/distortion stopped so!

  Now to get RockBox on this baby...

  Thanks again.

• Cannot move the new clips on the timeline?

  Hello world!

  I just recently changed a project I was working on. As I am new to the program, I always get a hang of things. Everything was fine until I used the link between after effects and first to fix a clip. When I got home first and wanted to add a new video just froze. I thought it was a bug, restarted the program and tired again, but the same thing happens again. It has been a few hours now and I have tried everything I can think off but I still get the same result.

  I'm trying to put a new clip in the timeline and the whole program freezes as soon as the clip touch the timeline. I can't click anything, I can't move anything, I can't even close the program without the Task Manager. Although I can still play the project using space and saving using CTRL + S, but it's as if the mouse disappears first. This is quite annoying because I can't keep my project because I can not add new clips, no idea how to solve this problem?

  Thanks in advance!

  You have a point set at the beginning of the sequence.  This is what is at the origin of the gel.

  Delete items In/Out and things should work fine.

  This is a bug that adobe is trying to correct.

• When I add new clips on my sequence on any project, audio stands

  When I add new clips on my sequence on any project, the audio appears on the bars of the sequence. When I drag a clip on a new project to create the sequence, the video and audio appear as usual, but when I drag any other clips the same thing happens (where the audio does.) I tried to uninstall adobe first pro and put it back (and reset all settings) and this has not fixed the problem. Anyone has any ideas to fix this?

  Hi Vasilios,

  Your tracks are not properly patched. On your screenshot, V1 is not targeted. Click on where it says V1 and try again.

  Thank you

  Kevin

• New Clip, music, not a subscription but still receive the note to synchronize

  Hello. We bought a new clip. Download all current music that was received through paid downloads, not a music subscription. However, the player continues to stop and send the Bill "synchronize to continue your music subscription". Currently, all the music played on a different clip we have and never stopped with this message. Any ideas? Or, is it possible to check my current music just to see if we can get it in a way of the trial back when or something? Thank you!

  Kim

  Hello. Thank you! We did a reformat and it worked. I don't know if it was that or the way that music has been transferred to the clamp. But reformatting worked. Thank you!

• Where to buy the new Clip +?

  I was wondering where I can buy the new Clip + with international shipping to Europe (Romania). EBay does not have it in stock, I see that Amazon has, but they ship electronic anyway. Any thoughts, or perhaps the links where I can buy? Please

  SanDisk said here that the Clip + will be available outside the United States in time for the December holidays.  In my view, that he said that he is for Europe and another geographical location - I don't know if this would include the Romania.  My hunch is, Clip + willingness to buy through eBay International well before that date; Remember, the Clip + is out for only 1-1/2 weeks now and is not 'officially' out until next week.

• Adobe has not corrected this problem with AVCHD clips extends on?

  I thought for sure that the problem of split clips would be resolved in CS5.  Unfortunately, after installing today, I found that the problem still exists, and I have to continue to use the mts merge tool. It's just another unnecessary step in the workflow. Did I miss something?

  Just to confirm that it was always a problem for me but with CS5 simply import the folder containing the elements - this means that if you use Panasonic HMC150/151, then you need to have downloaded PRIVATE folder structure on your hard disk and then perform a normal import but instead of import files, you need to hit the import > Import folder and select the folder PRIVATE. All your more than twenty-minutes clips now will come clean and put together!

• Time-remapping has a keyframe when I put new clip in the timeline:

  Hello

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  I would like to see no time remap keyframe by default and there are still 100%. The reason is that I use the Mercalli stable plugin and will not work if the time remapping a key image on it. So I always have to erase it first was can use the plugin. A bit boring.

  Thank you

  Simon

  I use PPCS4. I noticed that no matter what new clip that I bring in the timeline to a keyframe effect time remapping to 100%. Is this normal?

  Yes, it is a normal behavior.

• 2015.4 - problem with loading clips

  Hello! My problem started after the update first to the new version 2015.4 a few days ago. After I imported the media into the project, first begins the media loading and progress bar at the bottom right puts to work, but it stops abruptly in the middle of work. For example, if I have 143 clips he treated 20 or 30, and continues to make progress. It is impossible to work because I can not load these clips in the monitor of project or even using them in the timeline (speak 'media' in the meantime or monitor freezes on previous loaded clip, and I have to force quit the application).

  I tried the following steps:

  -J' tried to open several projects and the problem is the same in all of them

  -J' tried to clean up the files hidden from media, but the problem is still there

  -J' tried to create a new project and import the sequence chosen from the old project. First can't see sequences in old projects (?)

  -J' tried to create a new project and import the new previous project. First began importing but stucks and I have to force it quit (in rare cases, I could not even force Quits so I had to force shutdown the computer!)

  -J' tried to create a new project and import a new media (everything works fine?). It is not acceptable, because I must have the possibility of re - edit old projects.

  Now I'm back to the previous version of 2015.3 first, and all works fine. Please help me and tell me what I need to do? I can't find anyone else having this problem in our community forum, or am I missing something?

  Computer:

  Mac Pro 5.1 (2 x 2.66 GHz Westmere)

  24 GB RAM, Radeon R9 380 X 4 GB

  Mac OSX El Capitan 10.11.6

  It is a forum for users, not a formal link with the support of Adobe. While Kevin Monahan can provide assistance with many questions... He is the Director of product compatible for audio/video programs... it can't be everywhere, and special technical support isn't necessarily his job. Oversee these forums (and there not bad to check in addition to one ton of other functions) is part of his job... and he is also a very good Defender teams produced on behalf of users who post here.

  There are clearly some of you affected by this... and after having been several times on the same end, I know exactly what you're going through. However, there is not a ton of people posting about this, which makes it less screen 'on the radar' unfortunately.

  You filed this bug report? That IS the way to get your problem directly to product management and the people above them, that is those who decide on the budgets for the time of the engineer. None of these people never visit these forums. And if they don't see a bug reports, they don't know at the time of the budget engineer something. Even if they know and the payroll budget of something, the fix probably won't be in a few days we will tell.

  I still have 2014. 2and 2015.2 "mounted" on my bench, and there are a few projects that I left still 2014.2 and several in 2015.2 I look at what I pay to have all the available.

  Neil

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• First the problem of Crash - clips problem, but I need it! -included details below

  * Update: in fact, I think that I've found a workaround, but I always write in case someone is in a similar place for knowledge of the hive. My solution was just to transcode the clip in question in another format, completely remove the original of the project, and use a new. a huge pain, but seems to have worked. still curious the official solution that would save time in the future *.

  I had a lot of bad lately with the first crashing no matter when I try to move a project from my desktop to my home system via an external drive. I'm looking for advice for the long term on the best way to do it successfully without confused first. Maybe it's because I'm from a Mac to a PC? I do not know. In any case, the immediate accident, that I care as a result of the most recent attempt is the following-

  Anytime, that I try to make or export the sequence of 3 minutes in question, the Prime Minister breaks down (error down info) exactly in the same place %. I went one by one through the asset in the sequence of about 3/4 of the way through, and when I delete this piece, everything works fine. Trouble is, as you might guess, I need this piece in the final export, so I'm looking for a solution. The main element for the clip, I don't talk about playing well, makes fine in it's own sequence, everything. Without knowing for sure, I think it's maybe something audio, as I realize that first has a lot of trouble with a crash and audio for some reason any.  Thanks for any advice.  My system specs are below. I do turn GPU accelerated mode since it is so much faster that way, but I tried without it and get the same result.

  Name of the failing application: Adobe first Pro.exe, version: 9.2.0.41, time stamp: 0x56a208c9

  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

  Exception code: 0xc0000005

  Offset: 0 x 0000000300000000

  ID of the process failed: 0x2c58

  Start time of application vulnerabilities: 0x01d1903a103ab8bb

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro 2015\Adobe first Pro.exe CC

  Path of the failing module: unknown

  Report ID: e55753c1-ccd3-4597-aa64-9281d7357618

  Faulting full name of the package:

  ID of the failed package-parent application:

  Windows 10

  I7 4770 k

  16 GB OF RAM

  MSI Radeon 7950 / 3GB Twin Frozr GPU

  I'm under Premiere Pro CC 2015

  Could easily be a media cache or a cache problem of database with this clip. I suggest to delete these caches and previews and see if the project (after that it does not rebuild what it needs) works correctly.

  Neil

• What is the problem with new OS El Capitan? First does not work properly

  I just installed the new OS El Capitan, but first gives me a lot of problems. Preview works when I play timeline shape, but when I stop the video preview becomes kind of red with a lot of scratches. Another project does not recognize the clips on the timeline

  I'm in a deep deep deep Sxxx I need to work

  Here, the solution solved the problem for me, that sounds like the same problem I had.

  Re: Premiere Pro graphic problem?

  Best,

  Joel

• Major audio problem with merged Clips

  Try this once again, having a major problem since update works with merged clips.  I merge all my video and audio clips into a project of prior work flow in first pro.  I'll be shooting my images, tagged and synchronized in the project.

  Because the first does not have more than 1 project open at the same time, I copied the files, closed before workflow project and opened my feature film project that I worked for.  Copied clips merged bin, I click on a clip, video plays well, but there is no audio playback.

  I try to import the project files of prior workflows by using the import project feature, keep that real merged clips (like the rest of my project is this way) still no sound.  I cleaned my cache of media, reset preferences, even uninstalled first and redownloaded.  Problem persists.

  Can you help me understand what the question is whether I can go back to making progress on this feature of finishing project?

  Here's my workflow and no problems so far.  I do it this way because I found after all files in the project was originally crash constantly when I was working.  I have a new I7' processor IMac with 24 GB of RAM.  And since the first does not allow to open multiple projects at the same time (wish it would change.  Avid and FCP both allowed several projects) that I have to do things this way.

  Before workflow project file

  Label all the video and Audio files to match the scene #' / takes

  The value in points on all the video and audio in order to reflect the slate

  Merge Clips

  Functional project file

  Import only Clips merged into Project.  Import or copy/paste

  Now, I did this workflow from the beginning about.  Removing all the source video and all the audio clips of my work project remain while my bins containing my merged clips.  Had no problem and edit has been smooth.  Did a day pickup last week, followed the same steps as I did in the past, imported clips merged into my work project and clips have audio, set to none by default.  Now, once I'm in the sequence I can manually set and this is, but I can't read the audio data in the source monitor, which is how to change, there is no reason, I should have to go back in the manner of the crappy editing with FCP copy and paste from a sequence.

  Able to repro.  Bug was noted.