Problem NAT I think

Similar Questions

• move the local ip address to a different server (problem natting)

  Dear,

  I have a local database server with a local ip 192.168.101.3 and cisco ASA 5500, I use nat static as below:

  #static (Interior, exterior) xx.xx.xx.xx 192.168.101.3 netmask 255.255.255.255

  the server has been broken, and we moved the data to another server and give him the exact address of the intellectual property.

  Now we can ping the actual ip side.

  Help, please.

  Thanks in advance.

  Hello Asad,

  I've seen this problem before, hosts with the firewall or anti virus windows will not respond to any other host that is not on their Local network.

  Customer think usually it is a question of ASA, but as soon as we set up a NAT (OUTSIDE) 10 your_public_ip

  Global (inside) 10 interface;   We can see how it works because the server will now receive the packets of the SAA within the interface

  Anyway glad to hear it works fine.

  Please check the question as answered so future users can pull of this

  Julio

• Problems NAT with WRVS4400N

  I have a pretty well configured WRVS4400N with the DMZ enabled by default. My ISP has contacted me and said that my private IP are routed to the Internet. I can't make a sense that since everything seems to be upward and the work. I thought that the Internet would not work because private IP addresses are supposed to be deleted as soon as they are on the Internet.  Any ideas?

  The firmware version 2.0.2.1

  Yes, don't know what they mean your private is slotting of. It is possible for private routing... IP addresses but this happens very rarely when someone messes up on the side of the ISP... As long as the router works in "Gateway" mode, you'll be THAT NAT would have

  Personally, I think nothing of what was told to you (at this time), unless he is once again facing upwards.

  -Tom
  Please mark replied messages useful

• Problem Natting PIX

  I have a question about the behavior of the PIX firewall. Recently, we had two similar cases that happened, one with PIXOS 6.1.5 and the other is with PIXOS 6.3.4. The phenomena of the problem is:

  There are two global pool and nat 2 corresponding to these 2 pools. A NAT is for all inside the subnet, and the other nat is to control certain host for translation, as shown below:

  Global (tgn) 1 1.1.1.1 netmask 255.255.255.255

  Global (internet) 2 2.2.2.2 255.255.255.255 subnet mask

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 2 192.168.1.12 255.255.255.255

  NAT (inside) 2 192.168.1.15 255.255.255.255

  The purpose of these two NAT must only allow certain hosts to be able to access the Internet, while all guests can access to TGN. However, for hosts allowed to access the Internet, they can't access to TGN due to no translation under construction towards the top and the error message is "305006: portmap translation creation failed." After removing the nat 2, these special guests access to TGN, i.e. translation accumulates.

  Could someone tell me what is the reason for this problem? Could you also share with me the methodology of translation used by PIX firewall? No difficulty of Cisco in this issue?

  Thanks a lot for your kind explanations!

  This is correct behavior for what you have configured.

  For traffic flows by a downward revision to the safety interface, you need a pair of nat/global. The pair is designated by the number after the name of the interface brackets, in your case you have a pair of '1' and '2 '. Remember that nat statements are used on a specific game, then when the 192.168.1.12 traffic et.15 is perceived inside the interface, the PIX will choose ALWAYS the specific statement "nat (inside) 192.168.1.1x 2" for them, he done it before even to check the destination interface.

  Which means that if these two hosts are trying to go to the interface of tgn, they must have a corresponding statement of "global (tgn) 2..." to pair with their statement «nat (inside) 2...» Because that does not exist, they cannot go to that subnet.

  By removing the two individual statements nat, they began the "nat (inside) 1 192.168.1.0" statement because it's the next best match. This fact has a corresponding statement of "global (tgn) 1... ' matching and so traffic can flow properly.

  If you want to keep your config as is, then, for these two hosts to also access the interface of tgn, they will have the following text:

  NAT (inside) 1 192.168.1.12 255.255.255.255

  NAT (inside) 1 192.168.1.15 255.255.255.255

  If you simply want to allow all traffic inside tgn and have the inside hosts appear as their original IP addresses when he is on the tgn network, a better way would be to use a static as such:

  static (inside, tgn) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  and then you can just have individual statements 'nat (inside) 2...' for the hosts you want to go to the Internet. Could make your config that is easier to read and save you have to add in two statements of nat for each host that has Internet access.

• Since the installation of El Capitan, I had many weird not always repeating problems. I think it's a problem of memory of Doc.

  My computer barely works. Very slow when it does. It will often restarts after the failure of several software. Programs will not start or stop reliably. Several times I have to click on in the finder to start a program that will not start the doc. I did all the updates.

  EtreCheck version: 2.6.6 (226)

  Report generated on 13/12/15, 06:24

  Time 02:27

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  iMac (27 inch, at the end of 2013)

  [Click for plug technique]

  [Click here for the User Guide]

  iMac - model: iMac14, 2

  1 3.5 GHz Intel Core i7 CPU: 4 strands

  16 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: (Does that mean?)

  NVIDIA GeForce GTX 775M - VRAM: 2048 MB

  iMac 2560 x 1440

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since the start-up time: 16 hours

  Disc information: (Does that mean?)

  SD0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  Boot OS X (disk0s3) : 134 MB

  Macintosh HD (2) /: 1.11 TB (439,22 GB free)

  Storage of carrots: disk0s2 120.99 GB Online

  Storage of carrots: disk1s2 999.35 Go online

  ST1000DM003 disk HARD APPLE disk1: (1 TB) (rotation)

  EFI (disk1s1) : 210 MB

  HD (disk1s3) [recovery] recovery: 650 MB

  Macintosh HD (2) /: 1.11 TB (439,22 GB free)

  Storage of carrots: disk0s2 120.99 GB Online

  Storage of carrots: disk1s2 999.35 Go online

  ST3000DM001-1CH166 disk3: (3 TB) (rotation)

  EFI (disk3s1) : 210 MB

  LaCie (disk3s2) / Volumes/LaCie: 3,00 (1.85 free) tuberculosis

  USB information: (Does that mean?)

  Burr-Brown of TI USB audio CODEC

  Brother MFC-6490CW

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Optical mouse USB PixArt

  Prolific Technology Inc. Composite_device.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Thunderbolt CalDigit, Inc. station.

  LaCie d2

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  /Applications/Screenflick.app

  [no charge] com.araeliumgroup.driver.screenflickaudio (1.0.0d1) [click to support]

  / Library/Application Support/HASP/kexts

  com.Aladdin.kext.aksfridge [no charge] (1.0.2) [click for support]

  / Library/Application Support/Kaspersky Lab/KAV/Bases/Cache

  com.Kaspersky.kext.kimul.44 [no charge] (44) [click for support]

  / Library/Application Support/MacKeeper/AntiVirus.app

  com.zeobit.kext.AVKauth [no charge] (2.0.1 - 10.6 SDK) [click for support]

  com.zeobit.kext.Firewall [no charge] (2.0.1 - 10.6 SDK) [click for support]

  / Library/Extensions

  [loading] at.obdev.nke.LittleSnitch (4356 - SDK 10.8) [click for support]

  [no charge] com.Wacom.kext.FTDI (1-10,9 SDK) [click for support]

  / System/Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (1.5.3 - 10.6 SDK) [click for support]

  [no charge] com.kaspersky.kext.klif (3.0.2d39) [click for support]

  [no charge] com.kaspersky.nke (1.0.2d43) [click for support]

  com.Wacom.kext.wacomtablet [no charge] (6.3.10 - 10.9 SDK) [click for support]

  com.wdc.driver.1394HP [no charge] (1.0.11 - 10.4 SDK) [click for support]

  com.wdc.driver.1394_64HP [no charge] (1.0.1 - 10.6 SDK) [click for support]

  com.wdc.driver.USBHP [no charge] (1.0.11) [click for support]

  com.wdc.driver.USB_64HP [no charge] (1.0.0 - 10.6 SDK) [click for support]

  Startup items: (Does that mean?)

  ProTec6bX: Path: / Library/StartupItems/ProTec6bX

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.BezelUI.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.EscrowSecurityAlert.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.apple.Safari.SafeBrowsing.Service.plist [killed]

  com.apple.SafariCloudHistoryPushAgent.plist [killed]

  com.apple.SafariNotificationAgent.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.cmfsyncagent.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.CoreServices.uiagent.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.PBS.plist [killed]

  com.Apple.photolibraryd.plist [killed]

  com.Apple.pluginkit.PKD.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.QuickLook.plist [killed]

  com.Apple.recentsd.plist [killed]

  com.Apple.reversetemplated.plist [killed]

  com.Apple.scopedbookmarkagent.XPC.plist [killed]

  com.Apple.Security.cloudkeychainproxy.plist [killed]

  com.apple.spotlight.IndexAgent.plist [killed]

  com.Apple.suggestd.plist [killed]

  com.Apple.syncdefaultsd.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  29 killed processes lack of RAM

  Launch system demons: (Does that mean?)

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.MobileFileIntegrity.plist [killed]

  com.Apple.aslmanager.plist [killed]

  com.Apple.audio.systemsoundserverd.plist [killed]

  com.Apple.cache_delete.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.installd.plist [killed]

  [killed] com.apple.periodic - daily.plist

  com.Apple.sandboxd.plist [killed]

  com.Apple.softwareupdated.plist [killed]

  com.Apple.sysmond.plist [killed]

  com.Apple.tccd.System.plist [killed]

  com.Apple.wdhelper.plist [killed]

  13 killed process lack of RAM

  Launch officers: (Does that mean?)

  [operation] at.obdev.LittleSnitchUIAgent.plist [click to support]

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]

  [operation] com.adobe.AdobeCreativeCloud.plist [click to support]

  [operation] com.brother.LOGINserver.plist [click to support]

  [loading] com.epson.esua.launcher.plist [click to support]

  [operation] com.epson.eventmanager.agent.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  [loading] com.intego.backupassistant.agent.plist [click to support]

  [failure] com.kaspersky.kav.gui.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  [operation] com.wacom.wacomtablet.plist [click to support]

  [loading] com.xrite.device.softwareupdate.plist [click to support]

  [loading] org.macosforge.xquartz.startx.plist [click to support]

  Launch demons: (Does that mean?)

  [operation] at.obdev.littlesnitchd.plist [click to support]

  [loading] com.adobe.ARMDC.Communicator.plist [click to support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]

  [loading] com.adobe.SC.FPFeedbackService - 1.0.plist [click to support]

  [loading] com.adobe.SwitchBoard.plist [click to support]

  [operation] com.adobe.adobeupdatedaemon.plist [click to support]

  [loading] com.adobe.agsservice.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.aladdin.aksusbd.plist [click to support]

  [failure] com.aladdin.hasplmd.plist [click for support] [click for more information]

  [operation] com.cleverfiles.cfbackd.plist [click to support]

  [loading] com.cocoatech.pathfinder.SMFHelper.plist [click to support]

  [loading] com.cocoatech.pathfinder.SMFHelper7.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [operation] com.intego.BackupAssistant.daemon.plist [click to support]

  [failure] com.kaspersky.kav.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [failure] com.rogueamoeba.hermes.plist [click to support]

  [failure] com.sophos.autoupdate.plist [click to support]

  [failure] com.sophos.intercheck.plist [click to support]

  [failure] com.sophos.notification.plist [click to support]

  [failure] com.speedtools.scheduleagent.plist [click to support]

  [operation] com.xrite.device.xrdd.plist [click to support]

  [operation] com.zeobit.MacKeeper.AntiVirus.plist [click to support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [failure] com.adobe.ARM. [...]. plist [click for support]

  Items in user login: (Does that mean?)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox UNKNOWN (missing value)

  Google + Auto Backup UNKNOWN (missing value)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  Creative cloud application (/ Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app)

  Other applications: (Does that mean?)

  [operation] com.adobe.acc.AdobeDesktopService.176352.5A888135-0425-46E3-8393-285B7734B58D

  [ongoing] com.Adobe.accmac.134752

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001e.EtreCheck

  [operation] com.brother.scanner.ica.177312.3675F5A5-ED12-4BF4-923F-B132372C6A23

  [ongoing] com.brother.utility.NETserver.173792

  [ongoing] com.brother.utility.USBserver.173472

  [ongoing] com.google.GoogleDrive.91872

  [ongoing] com.ilifetouch.iclockmac.127392

  com.ilifetouch.iclockmac.helper [loading]

  [ongoing] com.wacom.TabletDriver.175712

  [ongoing] com.wacom.WacomTouchDriver.174432

  Plug-ins Internet: (Does that mean?)

  JavaAppletPlugin: Version: 8 Java 66 update build 17 check version

  o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [click for support]

  Flip4Mac WMV Plugin: Version: 2.3.8.1 [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobeAAMDetect: Version: 3.0.0.0 - 10.9 SDK [click for support]

  AdobePDFViewerNPAPI: Version: 15.009.20077 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.235 - 10.6 SDK [click for support]

  Silverlight: Version: 4.0.60129.0 [click to support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.235 - 10.6 SDK [click for support]

  googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [click for support]

  iPhotoPhotocast: Version: 7.0 - 10.8 SDK

  AdobePDFViewer: Version: 15.009.20077 - SDK 10.8 [click for support]

  WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - 10.9 SDK [click for support]

  DirectorShockwave: Version: 12.0.3r133 - 10.6 SDK [click for support]

  Safari extensions: (Does that mean?)

  ClickToPlugin

  Ghostery

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  FUSE for OS X (OSXFUSE) [click for support]

  Java [click for support]

  Time Machine: (Does that mean?)

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 1.11 TB disc: 672,61 GB

  LaCie: Disc size: 3,00 TB disk used: 1.15 TB

  Destinations:

  [Network] data

  Total size: 2.00 TB

  Total number of backups: 33

  An older backup: 10/12/15, 21:17

  Last backup: 10/22/15, 06:02

  Backup disk size: too small

  Size of backup TB 2.00< (disk="" used="" 1.82="" tb="" x="">

  Top of page process CPU: (Does that mean?)

  100% dock

  39% kernel_task

  8% SDM

  3% WindowServer

  1% fontd

  Top of page process of memory: (Does that mean?)

  11,12 GB dock

  1.29 GB kernel_task

  Mdworker (16) 279 MB

  Com.apple.WebKit.WebContent (2) 164 MB

  Mds_stores 82 MB

  Virtual memory information: (Does that mean?)

  15 MB of free RAM

  4 pm used GB RAM (1.09 GB being cached)

  12,53 Go Swap used

  Diagnostic information: (Does that mean?)

  December 13, 2015, 06:23:55 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062355_[redacted].crash

  December 13, 2015, 06:23:45 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062345_[redacted].crash

  December 13, 2015, 06:23:36 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062336_[redacted].crash

  December 13, 2015, 06:23:25 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062325_[redacted].crash

  December 13, 2015, 06:23:15 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062315_[redacted].crash

  December 13, 2015, 06:23:05 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062305_[redacted].crash

  December 13, 2015, 06:22:55 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062255_[redacted].crash

  December 13, 2015, 06:22:45 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062245_[redacted].crash

  December 13, 2015, 06:22:35 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062235_[redacted].crash

  December 13, 2015, 06:22:25 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062225_[redacted].crash

  December 13, 2015, 06:22:15 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062215_[redacted].crash

  December 13, 2015, 06:22:05 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062205_[redacted].crash

  December 13, 2015, 06:21:55 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062155_[redacted].crash

  December 13, 2015, 06:21:45 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062145_[redacted].crash

  December 13, 2015, 06:21:35 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062135_[redacted].crash

  December 13, 2015, 06:21:25 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062125_[redacted].crash

  December 13, 2015, 06:21:15 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062115_[redacted].crash

  December 13, 2015, 06:21:05 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062105_[redacted].crash

  December 13, 2015, 06:20:55 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062055_[redacted].crash

  December 13, 2015, 06:20:45 /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-062045_[redacted].crash

  December 13, 2015, 06:19:34 Library/Logs/DiagnosticReports/Dock_2015-12-13-061934_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 06:11:33 Library/Logs/DiagnosticReports/Dock_2015-12-13-061133_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 06:03:38 Library/Logs/DiagnosticReports/Dock_2015-12-13-060338_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 05:56:12 Library/Logs/DiagnosticReports/Dock_2015-12-13-055612_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 05:48:38 Library/Logs/DiagnosticReports/Dock_2015-12-13-054838_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 05:41:26 Library/Logs/DiagnosticReports/Dock_2015-12-13-054126_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 05:18:53 Library/Logs/DiagnosticReports/Dock_2015-12-13-051853_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 05:11:14 Library/Logs/DiagnosticReports/Dock_2015-12-13-051114_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 05:03:52 Library/Logs/DiagnosticReports/Dock_2015-12-13-050352_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:56:28 Library/Logs/DiagnosticReports/Dock_2015-12-13-045628_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:48:15 Library/Logs/DiagnosticReports/Dock_2015-12-13-044815_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:40:12 Library/Logs/DiagnosticReports/Dock_2015-12-13-044012_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:32:22 Library/Logs/DiagnosticReports/Dock_2015-12-13-043222_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:24:34 Library/Logs/DiagnosticReports/Dock_2015-12-13-042434_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:16:30 Library/Logs/DiagnosticReports/Dock_2015-12-13-041630_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:08:34 Library/Logs/DiagnosticReports/Dock_2015-12-13-040834_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 04:00:59 Library/Logs/DiagnosticReports/Dock_2015-12-13-040059_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 03:53:07 Library/Logs/DiagnosticReports/Dock_2015-12-13-035307_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 03:45:27 Library/Logs/DiagnosticReports/Dock_2015-12-13-034527_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 03:38:03 Library/Logs/DiagnosticReports/Dock_2015-12-13-033803_[redacted].cpu_resource. diag [click for more information]

  December 13, 2015, 12:43:26 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004326_[redacted].crash

  December 13, 2015, 12:43:16 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004316_[redacted].crash

  December 13, 2015, 12:43:06 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004306_[redacted].crash

  December 13, 2015, 12:42:56 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004256_[redacted].crash

  December 13, 2015, 12:42:46 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004246_[redacted].crash

  December 13, 2015, 12:42:36 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004236_[redacted].crash

  December 13, 2015, 12:42:26 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004226_[redacted].crash

  December 13, 2015, 12:42:16 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004216_[redacted].crash

  December 13, 2015, 12:42:06 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004206_[redacted].crash

  December 13, 2015, 12:41:56 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004156_[redacted].crash

  December 13, 2015, 12:41:46 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004146_[redacted].crash

  December 13, 2015, 12:41:36 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004136_[redacted].crash

  December 13, 2015, 12:41:26 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004126_[redacted].crash

  December 13, 2015, 12:41:16 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004116_[redacted].crash

  December 13, 2015, 12:41:06 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004106_[redacted].crash

  December 13, 2015, 12:40:56 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004056_[redacted].crash

  December 13, 2015, 12:40:46 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004046_[redacted].crash

  December 13, 2015, 12:40:36 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004036_[redacted].crash

  December 13, 2015, 12:40:26 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004026_[redacted].crash

  December 13, 2015, 12:40:16 AM /Library/Logs/DiagnosticReports/hasplmd_2015-12-13-004016_[redacted].crash

  12 December 2015, 13:59:56 self-test - spent

  December 12, 2015, 02:14:08 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021408_[redacted].crash

  December 12, 2015, 02:13:58 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021358_[redacted].crash

  December 12, 2015, 02:13:48 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021348_[redacted].crash

  December 12, 2015, 02:13:38 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021338_[redacted].crash

  December 12, 2015, 02:13:29 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021329_[redacted].crash

  December 12, 2015, 02:13:18 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021318_[redacted].crash

  December 12, 2015, 02:13:08 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021308_[redacted].crash

  December 12, 2015, 02:12:58 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021258_[redacted].crash

  December 12, 2015, 02:12:48 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021248_[redacted].crash

  December 12, 2015, 02:12:38 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021238_[redacted].crash

  December 12, 2015, 02:12:28 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021228_[redacted].crash

  December 12, 2015, 02:12:18 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021218_[redacted].crash

  December 12, 2015, 02:12:08 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021208_[redacted].crash

  December 12, 2015, 02:11:58 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021158_[redacted].crash

  December 12, 2015, 02:11:48 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021148_[redacted].crash

  December 12, 2015, 02:11:38 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021138_[redacted].crash

  December 12, 2015, 02:11:28 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021128_[redacted].crash

  December 12, 2015, 02:11:18 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021118_[redacted].crash

  December 12, 2015, 02:11:08 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021108_[redacted].crash

  December 12, 2015, 02:10:58 /Library/Logs/DiagnosticReports/hasplmd_2015-12-12-021058_[redacted].crash

  December 11, 2015, 02:23:46 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022346_[redacted].crash

  December 11, 2015, 02:23:36 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022336_[redacted].crash

  December 11, 2015, 02:23:26 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022326_[redacted].crash

  December 11, 2015, 02:23:16 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022316_[redacted].crash

  December 11, 2015, 02:23:06 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022306_[redacted].crash

  December 11, 2015, 02:22:56 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022256_[redacted].crash

  December 11, 2015, 02:22:46 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022246_[redacted].crash

  December 11, 2015, 02:22:36 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022236_[redacted].crash

  December 11, 2015, 02:22:26 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022226_[redacted].crash

  December 11, 2015, 02:22:16 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022216_[redacted].crash

  December 11, 2015, 02:22:06 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022206_[redacted].crash

  December 11, 2015, 02:21:56 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022156_[redacted].crash

  December 11, 2015, 02:21:46 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022146_[redacted].crash

  December 11, 2015, 02:21:36 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022136_[redacted].crash

  December 11, 2015, 02:21:26 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022126_[redacted].crash

  December 11, 2015, 02:21:16 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022116_[redacted].crash

  December 11, 2015, 02:21:06 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022106_[redacted].crash

  December 11, 2015, 02:20:56 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022056_[redacted].crash

  December 11, 2015, 02:20:46 /Library/Logs/DiagnosticReports/hasplmd_2015-12-11-022046_[redacted].crash

  Model name:	iMac
  Model identifier:	iMac14, 2
  Processor name:	Intel Core i7
  Processor speed:	3.5 GHz
  Number of processors:	1
  Total number of cores:	4
  L2 Cache (by heart):	256 KB
  L3 Cache Memory:	8 MB
  Memory:	16 GB
  Boot ROM version:	IM142.0118.B12
  Version of the SCM (System):	2.15f7
  Serial number (System):	DCPM42S0FQPN
  Material UUID:	B1336D7D-320C-5E5C-99DD-9A7B14375B82

  Model name:	iMac
  Model identifier:	iMac14, 2
  Processor name:	Intel Core i7
  Processor speed:	3.5 GHz
  Number of processors:	1
  Total number of cores:	4
  L2 Cache (by heart):	256 KB
  L3 Cache Memory:	8 MB
  Memory:	16 GB
  Boot ROM version:	IM142.0118.B12
  Version of the SCM (System):	2.15f7
  Serial number (System):	DCPM42S0FQPN
  Material UUID:	B1336D7D-320C-5E5C-99DD-9A7B14375B82

  Model name:	iMac
  Model identifier:	iMac14, 2
  Processor name:	Intel Core i7
  Processor speed:	3.5 GHz
  Number of processors:	1
  Total number of cores:	4
  L2 Cache (by heart):	256 KB
  L3 Cache Memory:	8 MB
  Memory:	16 GB
  Boot ROM version:	IM142.0118.B12
  Version of the SCM (System):	2.15f7
  Serial number (System):	DCPM42S0FQPN
  Material UUID:	B1336D7D-320C-5E5C-99DD-9A7B14375B82

  Model name:	iMac
  Model identifier:	iMac14, 2
  Processor name:	Intel Core i7
  Processor speed:	3.5 GHz
  Number of processors:	1
  Total number of cores:	4
  L2 Cache (by heart):	256 KB
  L3 Cache Memory:	8 MB
  Memory:	16 GB
  Boot ROM version:	IM142.0118.B12
  Version of the SCM (System):	2.15f7
  Serial number (System):	DCPM42S0FQPN
  Material UUID:	B1336D7D-320C-5E5C-99DD-9A7B14375B82

  First, you must uninstall MacKeeper Kaspersky and Sophos.

  Individually, one of them will cause the problems you describe. I can't imagine even computer functions at all with them all installed.

  Once you have removed these things, you can see if the real problems still exist.

  For what it's worth, there is nothing, you install on your Mac for any kind of 'maintenance '. These programs will be always just cause more problems, does not solve everything.

  If you are in the United States and bought MacKeeper, see here: https://yenchasoftwaresettlement.com/

• Problems NAT trying to authenticate through an ASA to AD

  I'm trying to authenticate from a DMZ host to a server active directory inside. I posted a clean configuration with everything I think you'll need to know. Basically, I opened all the ports for authentication of domain (I think)... but I still get an error when I try to add the DMZ host to the domain.

  The error I got and the lines I added to the AD authentication are in the txt file.

  The date this project deadline was Monday, any help would be GREATLY appreciated.

  Thank you

  Chris

  the acl currection and static above

  AD = 192.168.5.100 (inside)

  DMZ Host = 10.10.150.200 (DMZ)

  static (inside, DMZ) 192.168.5.100 192.168.5.100 netmask 255.255.255.255

  Access permit tcp host 10.10.150.200 DMZ_access_in list 192.168.5.100

  Access permit udp host 10.10.150.100 DMZ_access_in list 192.168.5.100

  Access-group DMZ_access_in in DMZ interface

• can I download a previous version when I got my mac fixed? problem is I think I have everything that I need, but I need to download from the internet, but I can't find the previous version. Any help would be great.

  My MAC crashed and I had fixed. Problem is the guy who fixed it, he wiped away. Can I re-download my previous version of Photoshop Elements (11)? The next problem is, I have to do from the internet bc my HDD is screwed. I bought an external disk for her drive, but that won't work either. Any help is appreciated. Thank you.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Problems of recovery think Z61m Pad

  (Sorry for hijacking the thread...)

  I tried, but have no option F11... I already have the recovery CD and the recovery partition is there, but I am not able to start.

  Note of the moderator; Subject and published as it was separated from another thread.

  
  

• How to do a side menu appear on the top (menu problem Z I think)

  When I'm viewing this site in Firefox on a laptop, that the left menu appears under the flash slideshow, obscuring the submenus, it is fine in Internet Explorer.

  Is there a way to show the menu will always appear on top of the slide show flash in Firefox?

  Thank you.

  http://www.sturcarnival.co.UK/

  Please refer to a similar thread below:

  http://forums.Adobe.com/thread/480128?TSTART=0

  This should help you.

  Kind regards

  Vinay

• Open with a Xbox NAT problems.

  When I got my 1900ac I used Media Priortization to get NAT open for Call of Duty Advanced Warfare on my Xbox One. prioritize the Xbox. It worked fine for about 6 months until what I changed my operator of cable/net of Nextech in Ks. This company uses the 1900ac to connect its system to all it's customers (since I already had one they use mine). Unfortunately, I am unable to get an open NAT in this game I tried almost everything, NAT forwarding, triggering, prioritization of the media. Support of NexTech & Xbox Live support, useless. I tried Portforward. com, nothing. Redirect port 53 breaks the connection to the network & making the static ip address change for Xbox has not helped. Almost everything I looked at seem obsolete & I am at my wits end. It would seem by now Linksys should have available solutions, any ideas?

  Chin_pamz13 thank you very much for your answer. I tried to check if my modem had a public or private ip address, but I don't know how to do this; I read on double NAT elsewhere. Nevertheless, I think I finally found a solution that seems to work so far. I went to the website "tech - recipes.» com "& found an article, 'Xbox one open NAT' by Aaron St. Clair.» I tried his first suggestion regarding the port of release, with additional ports I had'nt seen before. Who has not worked for me so I followed his instructions to the Xbox in the demilitarized zone & it works! I think that my problems from before were the result of bad to configure the static ip address for my router & Xbox. The previous instructions had me change the ip in the console with the router. Aaron said does not do in the Xbox, leave the router to do the work, it's supposed to do & make sure the console settings are on automatic. In the router in the DMZ, I was'nt sure how to proceed, but at the bottom is a section called list of reservations DHCP; clicked on this, XboxOne saw, clicked on that & he filled the top for me MAC address. Then I went to network settings Xbox, advanced & clicked settings on "automatic" to the ip address, subnet and DNS. I checked the connections mutiplayer, toured "hold bumper & trigger buttons" & finally got a NAT open; pulled up to cod Advanced Warfare & also got open NAT it. I could have screwed up when I did the port triggering, but given the difficulty of the DMZ seems to work I'll let things alone. Hope this helps anyone else having problems NAT open.

• My computer has multiple problems (downloads, updates, drivers, software...) which I think could be connected.

  Everything I download becomes corrupted somehow or is unable to run. I tried to UN - and reinstall the Zune software (because my computer had ceased to recognize my Zune while it is plugged), but when I tried to install it again, I got a "not a win32 application invalid" notification. I tried several times to download updates, but they still run into an error before completing. My mouse cursor freezes or moves around / clicks on its own occasionally. My internet connection is extremely slow and unreliable, despite the fact that the connection has recently been updated and given a more secure password. I tried to run a system restore in the hope that it would be useful, but which failed due to a program that could not be accessed. I disabled Avast! (I also have Malwarebytes can't see how to turn off) and ran the system restore again, but met the same problem. I think it was a virus, but I ran Avast! "s boot time scan run Malwarebytes in safe mode, and the problems continue.

  I'm sure a couple of them at least are pure coincidence, but most of my problems appeared recently (about three weeks) ago and I have been fighting with them since. This is what gives me a thought that they are connected. Does anyone have an idea of what my problem, or how I might solve this problem?

  Here are some other things you can check. Get your updated antivirus program and start safe mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

• Static NAT enable VPN site-to-site.

  Hello

  We plan to build VPN site to site, but, we have a single public routerable internet IP address to assign VPN on Site A, but Site B is ok.

  in this case, I think that we must use static NAT on the router, the simple diagram is as below.

  internal a subnet - router VPN - router for Internet of the Site - to - VPN - B B Site internal subnet.

  the final goal is to make the communication between internal a subnet and subnet B on IPSEC tunnel.

  OK, as I said, Site A having a public IP address, then it must use the static NAT and need to apply on the Site router.

  Router

  interface x/x

  Head of ESCR to the internet

  NAT outside IP

  !

  interface x/x

  Head of DESC to internal (VPN)

  IP nat inside

  !

  IP nat inside source static (like IP address x.x.x.x) public (as private VPN interface IP x.x.x.x)

  so, wouldn't be work without any problem? I think it will work, but I would find other one just in case.

  Hey,.

  Is that what you try to achieve:

  subnet A - A = vpn router = router B - Sub-B network

  and you need communicate between Subnet A and subnet via ipsec vpn b?

  Concerning

• Policy overlapping NAT VPN

  Hello community,

  I'm going nuts here. We try to configure a NAT policy through a site to site VPN tunnel, but can't seem to turn it on. Here is our configuration:

  access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 192.168.12.0 255.255.255.0

  access-list extended sheep allowed host ip 10.23.1.5 192.168.12.0 255.255.255.0

  inside_nat_static list extended access allowed host ip 192.168.1.5 192.168.12.0 255.255.255.0

  inside_nat_static2 list extended access permit ip host 192.168.1.5 everything

  NAT (inside) 0 access-list sheep

  NAT (inside) 2 192.168.1.0 255.255.255.0

  public static 10.23.1.5 (inside, outside) - inside_nat_static access list

  public static 63.123.4.56 (inside, outside) - inside_nat_static2 access list

  The VPN part I omitted because it is correct. When we initiate a ping the tunnel arrives. The problem we have is on our side with policy NAT I think. With a ping from the remote desktop on our ASA, we see all incoming traffic, but our server does not transfer out.

  Appreciate any input...

  -Tom

  Tom,

  Sorry for the delay, I forgot you, I've just been very busy

  Here's what you'll need:

  First remove this (intentionally want NAT traffic not to 'sheep')

  access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 192.168.12.0 255.255.255.0

  access-list extended sheep allowed host ip 10.23.1.5 192.168.12.0 255.255.255.0

  Then add this to translate your outgoing traffic

  access-list 199 permit host ip 192.168.1.5 192.168.12.0 255.255.255.0

  public static 10.23.1.5 (inside, outside) access-list 199

  Translate your inbound traffic also:

  public static 192.168.12.0 (exterior, Interior) net of 192.168.1.0 255.255.255.0

  Describe your crypto since translated ACL localhost translated to the remote subnet.

  cryptomap list of allowed access host ip 10.23.1.5 192.168.12.0 255.255.255.0

  You can remove the other line of the ACL.

  Your host should access the 192.168.12.x which is translated remote network.

  Try it and let me know how it goes.

  Raga

• DNS/ping/traceroute problems on mutiple UNIX hosts

  e run Workstation 9.0.1 with a set of corresponding to a 'standard' UNIX clients build the image on our development books and two remote side desktop workstations. The main differences other than the material are of course laptops work over Windows 7 with the virtual NAT device and systems aside two Office work above RedHat 6.2 with a bridged virtual device. We use bridged on the sides of the office, because we have an application that cannot use NAT and we use NAT on laptops, because our VPN allows only a single IP address by when working remotely.

  What we see on the systems side office, is that when there are several guests running, any network operation performed on more than two people will fail. I can't go to any guest and the first two works, the third or more will fail. If I recycle the interface on a deposit, it will usually start working immediately, but then one of the previous guests who worked will stop. If I leave the comments all sit for a while (minutes maybe 5 or 10, have not really timed), the first two I hit (seems not serious if it's HR, SuSE, Solaris, you have) will work and the third or more will not. We first noticed this with DNS, but soon found that the same is true for ping or traceroute to name servers.

  Books spread never this problem, so I think it's something to do with the bypass.

  I created a tcpdump on the host and each guest. Everything seems normal, when it works, but on a failing guest, I don't see any traffic outside the host or guest.

  I've chipped away at this for one day before coming here. Summer through the logs of the system on the host, the guest and vmware logs. Piddled autour with settings on the host kernel tcp. No luck so far. If I do something wrong with the configuration I would rather know that now just go to the 9.0.2 update, in the hope that something is fixed it.

  Welcome to the community,

  This problem could be related to the physical switch port configuration. Several switches come with port security enabled by default (or it is configured by purpose) that limit the number of MAC addresses that can connect to the switch port.

  André

• Problem with the iPhone OS. Have to restore it several times and it now has white screen flashing with Apple logo

  Got my iPhone SE a little over a month since the Thailand of the Apple Store.

  First he couldn't restore entirely made from a backup so I had to delete all data and content then restored again. Then try to restore from a backup, still have problems (apps froze, failed to synchronize all of the apps, then tried to shutdown phone and glued on white background with the Apple logo).

  Try to third, I put my phone in recovery mode and restore as a new iPhone. All original content is now gone. Should it start again.

  Then small annoying problems occurred. For example, I could not find applications in the App Store, could not download new free applications, could not buy music on the iTunes Store app. It seems that Internet was frozen, when in fact it works always fine when try browsing on Safari. Facebook froze and could not push Home button to close App game graphics making static sound glitches but always disappear when him restart the application. Can't post photos on a social media application because my whole library of photos seems to be empty, when in fact he was always there. When I was taking pictures, the preview images were extremely blurry, and when checked in Photos app there is no trace of this photo that I took. I tried to close all the applications and open it again but the problem still persists. So I close the phone and restart it just to find that it stuck on the white screen with the Apple logo once more. Then, I took the phone to the Apple service provider. They restore the phone as a new iPhone for me and I had to start over once again. Only 4 days after this, my iPhone application suddenly found me a new unlock access code within 60 minutes without reason. I have to reset hard to solve the problem. And after that, the same day, my iPhone starts to blink on and outside and sometimes the white screen with the Apple logo appears.

  Whenever I said my problem of staff Support from Apple or the Apple service provider, they told me that it was a software problem. How can I when I do all these problems again and again from the beginning until now? Can anyone suggest me the right way to solve this problem? What problem do you think it's from? I can't take this anymore. I need a good show, not working iPhone undesirable. I can't keep it restore/reset/reboot over and over again like this. Please, help me.

  Sasawan

  You can watch some of my problems here on Youtube > >

  1 screen kept flashing white background with the logo apple and restart and turn off by itself. Sometimes I can go past lock screens, but it only last a few minutes, then it starts all over again > > https://youtu.be/tfygV57NmmY

  2 message when my phone push me to reset my unblocking reason code > > https://youtu.be/a_AKPWxfAfs

  3 static glitch sound on the Sims Freeplay game > > https://youtu.be/qw12RZ4yMqc

  Take it to an Apple Store for the assessment of the guarantee.  If you have restored to factory settings, and these problems persist, there is a hardware problem, no matter what you' re said.