Problem of color change: HELP NOW PLEASE!

Similar Questions

• After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

  After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

  FAQ: Why am I getting yellow and red lines running through my images on pause?

  Update of El Capitan.

• (HELP NOW PLEASE) G60-230US boot loop

  I recently tried to get on my laptop HP (G60-230US) and that she would go to where it says ' from Windows... "and he should start for a few minutes, then my screen white flash, then go black and then return to"Starting Windows. "... "I tried to go to the recovery system, but when I get there, my black stop screen and then return to"Starting Windows. "... "I tried to start in Safe Mode, same result. I took out the battery and tried to start it, same result. I really need to get my laptop back and running so can someone help me ASAP?

  Thanks in advance.

  Hello

  The reader at the link below would be perfect for your laptop.

  Hard drive 320 GB

  The procedure to replace the hard drive begins on Page 49 of your & Maintenance Guide.

  Once you have installed the new HARD drive, simply use your installation disc Windows to reinstall the operating system on the new drive, inserting the disc and then restarting the laptop.

  Kind regards

  DP - K

• HP probook 4545 s: I need help now please help me!

  OK so I have just updated to windows 7 Ultimate edition 32 bit and for some reason that I have no ethernet drivers or drivers wifi so I can't connect to internet on my pc somehow! Help me!

  You are the very welcome.

  Here is the driver for the wireless card you need...

  FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59828.exe

• Resulting in a color change?

  Hello

  I noticed that sometimes in my videos in a frame or two color changes completely. Please see attached images. As you can see in the second picture, the color has changed, and the picture has a greenish tint to it.

  I do not see this change in the original film.

  I applied the color levels, automatic automatic and brightness / contrast to the entire sequence. Do you think this has something to do with it? If so, how can I fix a picture?

  Normal color

  

  OffBeat color setting:

  

  What kind of camcorder is your coming video and how did you in your computer?

  When you set up your Premiere Elements project, including project settings have you selected?

  Particuarly in version 9, if your project settings match the plug of your camcorder, you should see no. change at all in the video you when you add it to your project.

• I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  Hi William,.

  Welcome to the Microsoft community.

  Batch file is a type of script file, a text file, containing a series of commands to be executed by the command prompt. When you run a batch file, it opens the command prompt to run the scripts.

  It would be great if you can answer the following questions:

  1. what happens when you try to run a batch file?

  2 are. what batch file you referring?

  3. the problem occurs for a particular batch file?

  First of all, I suggest you to check the commands written in a batch file. To do the same thing, just right-click on the batch file, and then click change. It will open Notepad with the list of orders scripted for this particular batch file.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• I could not hear any sound from my speakers, only used the tool of the window all still no sound, so upgraded to sp2, now having display problem & still can't hear it please help?

  I have xp home edition sp1 happen something with my sound on pc tools in the window couldn't resovle the problem, so updated to sp2, now, I posted problem cannot reset resolution on screen and still no sound, anyone has a solution?

  Hi JeanBolling,

  ·         What tools did you use to solve the problem?

  ·         What happens when you try to change the resolution?

  Method 1: Check if you have followed this guide from Microsoft.

  No sound in Windows

  Method 2: Uninstall the sound card and reinstall to check the issue.

  a. click Start, click Control Paneland then double-click System.

  b. click on the hardware tab.

  c. expand sound, video and game controllers.

  d. right click on the sound card, and then click on Uninstall.

  e. restart the computer. Log on to the manufacturer's Web site and update the latest audio drivers.

  Method 3: For the display problem, you can consult this article.

  Resources for troubleshooting problems in Windows XP

• A toolbar to work is now not checked in Firefox and I can't use it. Can you help me please?

  I used Nectar as my homepage and a toolbar added for many years. I always that it is simple and easy to use (a big plus for aging technophone!) and it is especially useful for letting me know what stores I could shop with through Nectar to increase my Nectar points. Points were also earned to complete the 'research', another useful feature.

  In the past months, I have struggled with this up to the point where I contacted the persistent Nectar. They have kindly added 'free' points to my account to compensate for the fact that I had been unable to use the toolbar or to the shop via the Nectar. They suggested uninstalling and reinstalling the improved version of their toolbar. I tried to do several times, but have failed to be able to access online stores through Nectar and also to add to my total points using the Nectar search tool.

  After trying again, in vain, to reload the toolbar, I now have to find a message from Firefox saying "Nectar Toolbar could not be verified for use in Firefox. Proceed with caution.

  Can you please check this product so that I can continue its use? I don't know how else more to come this problem and would like to make things as simple as they were until this issue has been raised.

  I hope someone can help - but please keep in mind of my state of technophobia and explain things in a way very simple for me (IE without using jargon 'computer' and technical writing!).

  Thank you and hoping that you can help.

  Firefox 40 verification is only a warning message, the new 'signature' feature add-on will keep an extension to work in Firefox 40.

  If this Nectar toolbar simply stop working in Firefox 40, I can only imagine that this is due to a deprecated API that uses the extension or another issued compatibility. Add-on developers who are registered with the official website of modules was warned about this, API removed from Firefox 9 to 12 months to give developers time to fix their add-on before Mozilla removed the corresponding code for this API.

  Bottom line is the Nectar needs to fix their extension to get it working again, AND they need to submit it to Mozilla Add - ons for the signature.

  In 41 Firefox Add - ons that are not "signed" will be disabled, but the user can substitute for it. In Firefox 42 that replace the missing aura of the Beta and Release versions - signature is required for Firefox 42 and subsequently.

• Just upgraded my iPad 2 (model MC769B/A) 9.2 and it works now VERY slow.  Is this a known problem and is there a fix please?

  I just updated my iPad 2 (model MC769B/A) to 9.2 (13 c 75) and it is now VERY slow.  Is this a known problem and is there a fix please?

  The iPad 2 is the older and less powerful device that can always be upgraded to iOS 9.2. Many users have had success running iOS 9.2 and some have had problems with it on their iPad 2. I would like to start will be all the basic things and then, if necessary, back up, restore settings and restore the backup or restore like new as a last resort.

  Claire Safari. Go to settings > Safari > clear the history and data from the Web site

  Close all applications. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close

  Force reboot the device. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this does not help, try to reset all settings. Settings > General > reset > reset all settings. No data is lost when you do this, but all the unit parameters must appear again, including the passwords of your WiFi network.

  Reset factory via iTunes

  http://support.Apple.com/kb/ht1414

  If you restore like new, past purchases can be downloaded again.

  http://support.Apple.com/kb/ht2519

• Can someone help me please? my email has been hacked and my password was changed, I don't know what to do, please help someone

  Can someone help me please? my email has been hacked and my password was changed, I don't know what to do, please help someone

  Hello

  If you are referring to the problems of hotmail please repost in hotmail forums

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  Consult with Microsoft Certified Solutions
  Click on the links to go directly through your chemical below problem
  1 How to work the views Active Hotmail?

  2. what to do if you can not connect to Windows Live Hotmail

  3. your account has been temporarily blocked

  4. account compromise - unauthorized account access

  5. reset your password

  6 error when you try to send an e-mail: your message seems to have triggered our spam filters.

  7. change your password

   

• AV.exe and problems that result. Help, please!

  Out of nowhere, I was struck by the av.exe virus, and he made sure I couldn't open any .exe files. I did some research and found out how to change my registry to resolve this problem, and my programs open now.

  Many of the icons on my desktop and start menu are still empty, but the .exe has been reassociated. How to bring back the icons?

  I don't know if there is anything else I should do and if the virus is still there. Norton said he got rid of av.exe, but how can I be sure?

  And also, this virus affected all files outside the .exe?

  See if this article helps you:

  How do I rebuild the icon Cache in Vista

  The virus did not affect the real. Just register, EXE files.  He probably touched nothing else, the purpose of this little piece of beef handy is to extort money on your part, not to ruin your computer.

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com - KVOA television, Tucson, AZ.

  Live Hot Licks - www.badnewsbluesband.com

• Help me, please! [Problems of renewal subscription]

  Help me, please!

  I try to renew the subscription, but does not appear in the 'details of payment change"button try to buy a new plan and also cannot.

  Help me please.

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html

  -e-mail https://forums.adobe.com/thread/1446019

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• update monitor for 4 k now 12 elements and cs4 in the Toolbox and etc. is too small can help you please dennis

  update monitor for 4 k now 12 elements and cs4 in the Toolbox and etc. is too small can you help me please Dennis

  You cannot change anything in these versions to increase user interface, only the most recent versions.  You can try to set the resolution of the screen.

• Its took me 3 days to buy Presenter, finally I got it after work again now, I talked to 3 people online support, no one can help her looks like a joke at this stage can someone help me please its asking me for the serial numbers but I buy p

  Its me took 3 days to the presenter bought, I finally got it

  After that there's now work I talked to 3 people online support person can help

  It sounds like a joke at this stage

  Can someone help me please

  His request than me for the serial numbers, but I buy per month

  Hello

  This could be due to a host file incorrectly configured as hosts of operating system files map the hostnames to IP addresses. A misconfigured hosts file can affect the ability of your computer to connect to the Adobe activation servers.

  Follow these steps to see if there is a problem with your hosts file and if necessary

  Please follow the steps below:

  1. Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
  2. Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
  3. Save the hosts file: choose file > record under, save the file as hosts.backup, and then click OK.
  4. Look for the hosts file for entries that refer to adobe (for example, 127.0.0.1 activate.adobe.com, or 127.0.0.1 lm.licensing.adobe.com) and delete these entries.
  5. Save and close the file.
  6. Restart your computer and try to turn it on again.

  Kind regards

  Sharad

• Help with unexpected photo color changes when loading

  Hello

  I have learned things for a few years and doing pretty good to the mounting

  photos like portraits.

  Recently edited portrait high key, when I compared the RAW CR2 file in flt along the side of the photos

  converted to psd Adobe, colors where change after the opening and saving to the psd format.

  The thing is that I did no changes.  I just open the raw file, then click Open edit thought go in ele.

  Once it opens as a psd, the colors have changed.

  Camera is set to Adobe RGB.  ELE set to manage colors for printing.

  Is this normal, or something I'm doing or not doing.

  Suggestions and recommendations requested.

  Txz.

  Will be

  I understand that you compare side by side on-screen:

  -l'image in the ACR dialog, without any changes

  -l' new image observed after opening in the editor and saved as psd and reopened in order to be able to compare side by side.

  I agree that you should not see any significant color change.

  Notes about your settings:

  -Camera set to Adobe RGB: good for parameter ignored with raw files, JPEG files (PSE, the choice between sRGB or aRGB ACR depends on the second parameter in the Editor: always optimize for printing). Are not relevant to your problem.

  -Always optimize for printing: refers to the raw data will be converted to aRGB for printing and shown according to your screen. This is the right setting, if you want to print in ARGB.

  So, there's nothing wrong with your settings.

  Y at - it a bad screen color profile saved on your computer? Which could happen with other software or screen attempt calibration tools...

  I can't help much in this situation, but it might be useful you have described the color differences s two views. For better visibility compare colors, beware of the surrounding parts of images: If you're on a light background (ACR) and the other in a dark (editor), you see exactly the same colors.