Problem of control of remote computer vs laptop mouse?

Similar Questions

• Problems connecting Xbox 360 to computer vista laptop via ethernet connection to the network local (the laptop is connected via wifi)

  I spent a few hours trying to solve this problem, and I've been to countless forums.  They all told me to go into "Manage network connections" and right-click-properties on my connection Wi - fi.  Then they speak by clicking on the tab sharing... which I did not.  I don't know how to share my connection to the WiFi with my xbox 360.  It is supposed to be easy, but I can't realize what is designed as "highly probable."  I have a laptop Sony Vaio VGN-FW390 and Vista Home Premium. Maybe I have to set up a connection to an access point, or do a sort of thing ICS... I do not know.  I am incredibly annoyed by this, and I'd appreciate any help.  Thank you.

  Messier,
  Thank you for visiting the Microsoft Answers community forum.

  Try this and see if it works for you, it has worked for some users.
  With no cable connected between the computer and the xbox, go to control panel, network and sharing Center. You should see a "Local Area Connection", which will show disabled at this stage, and your "wireless network connection", which should show connected. Connect the ethernet cable to your laptop and the back of the xbox. Select the 'connection to the Local network. After that it is well connected, disable your 'Wireless Network Connection'. Once disabled, right click and click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Once this is done, your wireless internet connection should say shared next to the State of the connection.
  Turn on your wireless connection. Then, right click to 'connect to the Local network' and click on repair. Allow the end. test the connection on your xbox.

  Let us know how that works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer startup laptop problem once again!

  I AM A USER OF LAPTOP HP G70-111EM

  Hello..

  I am now running windows 7 not vista that I've updated so take a look at this picture and see what you think

  http://www.Flickr.com/photos/philarch/5225739481/

  just to tell you this phone was no where close to a removable hard drive for more than 1 month!

  Of

  Phil...

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  I have a HP G70 - EM I think... INCORE Intel i5 4gbram, 1tbh/d, computer LAPTOP WITH WINDOWS 7 premium USER...

  Us and try to resolve technical problems online until it has your from?

  one of my good computer friends recommended that she might also need a complete re-installation of windows 7

  OR

  a new hardrive!

  So I have a HP G70-111EM what is the biggest hard drive you can get for it?

  serial number only I had the h/d has been: 485036-003

  so far, I got no chance in the search to the United Kingdom to h / g-d for that make the computer hp laptop

  everyone knows where a?

• I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

  I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

  1) update your nVidia/software drivers to the latest version for your model video card + operating system.

  (2) check that the equipment is not defective.

  This is not a Microsoft / number of the operating system.  For additional troubleshooting - contact the manufacturer (nVidia).

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• wireless computer dv9410us laptop problem

  Someone at - it a fix for the problem computer dv9410us laptop wireless? Restore to factory for vista 32 bit and wireless card does not appear in Device Manager. Updated the bios and does not work.

  Hello:

  You have two choices, if you don't want to buy another laptop.

  1. buy a usb wireless adapter at low prices.

  2. replace the motherboard (not recommended). The power was cut on the mini-PCIe slot that's why your wireless card stop working.

  Problems of major motherboard dv6000/dv9000 notebooks.

  Paul

• Computer HP laptop problem. Please help someone!

  Hi guys,.

  So basically, my computer HP laptop froze about three times today. I had to press the button reset each time. Finally, the computer came back the menu but has frozen immediately. I pressed the reset button again. This time, when I turn on the laptop the first thing that appears is the HP Logo and the "resumption of system preparation. After a while the screen goes white and after a while once again the HP logo comes again, but this time is not written and just a loop that goes round in circles. Nothing happens after that. I tried it turn on and shut off again, but the same thing happens.

  Does anyone know how can I fix? It seems that you must press F11 when you turn it on and go through a few options to make it work again? I have some pictures and music on there I'd like to keep, can I do this? Or do I need to clean the system? There not too important! Little help would be great if someone can give me some adivice on how to fix it!

  Thank you very much

  Hi Cammy, I'm back

  Press the ESC key at startup then F2 when the Start Menu is displayed, this will start the System Diagnostics, advise me the results.

  Redemarrer restart using the ESC for the Start Menu button, press the F11 key to the restoration of the system, do not press any other button unless he asks you to do.  Let it run for 15 minutes to see if any other measurement of the recovery process.

• Connection to the remote computer problems

  Have XP Pro on work and home computers. Monitoring the windows XP start using remote desktop info. Computer work defined as host, trying to connect remote, after putting in the name of the computer to work, I get "unknown parameter was specified in the computer name field.  How can I connect to my work computer?

  Hi Raider2118,

  · What is the work computer protected by password?

  · Is the work computer have to plan together?

  When you connect to another computer using Remote Desktop connection when you specify ComputerName/console in the computer box, and then you click Connect note ComputerName is the name of the remote computer to which you want to connect.

  To get the name of the computer navigate to the location below:

  a. Click Start, right click my computer

  b. click Properties

  c. Select the computer name tab

  If you have tried the steps above and then temporarily disable the security software on the computer and then try to connect to the computer and check the results.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• File sharing via router computer LinksysWirles laptop pc problem.

  Heya!

  I have a problem, try to esteblish sharing files between laptop (connection wirles, WinXpHome) and the office (cable, WinXpPro).

  Use the Network Setup Wizard I have setuped computers for sharing.

  I can access shared folders on the desktop from the laptop, but I can't do the same for office - I don't see anything in my workgroup.

  I tried to disable firewall and AVG Anti-virus on two computers - does not work too.

  IM solutions, what else could be... Any ideas?

  Thank you

  OK, I managed to solve the problem

  I surprised myself even

  problem was in network connections-> or -> advanced settings - connection to the Local network-> mark all checkboxes

  Cheers!

• iTunes is not able to find the USB controller on PC desktop computer and laptop

  Hello

  Since the two versions of iTunes for Windows (10) diagnostic program tells me a green dot in front of "USB-connections", but didn't tell behind the "no-USB controllers found. That's why my iTunes is not able to connect to the iPhone 5. I have the same problem on my desktop and on my laptop. Windows detects all my USB Ports, well. If someone can solve it? Thank you.

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• HP 15 af-103ax: need drivers for my computer hp laptop

  I bought hp 15 af-103ax laptop computer. and now, I have installed windows 7 replacement to win 10, but the problem is that I can't find the drivers for windows 7 (wifi, graphics, bluetooth, webcam, etc.) Please solve my problem

  Hello:

  You can use the W7 x 64 drivers and software of the af-000, except files BIO, chipset and firmware.

  http://support.HP.com/us-en/drivers/selfservice/HP-15-af000-notebook-PC-series/7771410/model/8341291

  I would use this graphics driver of those listed.  Certainly, you do not use switchable graphics from AMD/Intel driver.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp71637.exe

  You need these drivers wireless and bluetooth.

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  File name: sp70888.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

  In addition to the drivers on the support page, you must install the chipset drivers amd since the link below which will install the smbus and usb3 controllers.  You want the 1st file listed in the page.  Install and reboot the PC.

  I would like to install this driver before installing the other.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Connect to a remote computer through Logmein impossible in version 4

  Hi, yesterday I've upgraded to Firefox 4.01. Since I can no longer connect to my remote computer (a computer control a solar panel system) normally I create in my laptop, a window displaying the remote computer via Firefox and Logmein, and I can't access the software from remote computers. In Firefox 4.01, I see a screen, but it's all black and does no access.
  In Safari, everything works fine. No clue why Firefox 4.01 behaves as it does.
  Veuileez
  PC

  I see you are using OSX. Unfortunately, LogMeIn hasn't updated their firefox plugin to be compatible with the version of OSX Firefox 4, only for the version of Windows. If you really need to be able to use LogMeIn with Firefox in the meantime their update their plugin, you could downgrade back to firefox 3.6, or use another browser.

  EDIT: as of yesterday (12/05/11), it seems that LogMeIn has updated his plugin, even if I had not anything on their site as a result of advertising. I was invited for an update, update the plugin and just for fun FF4 tried again and it worked.

• How can I activate the remote computer to power saving Mode monitor?

  I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
  Desktop computers:

  • are the Dell Optiplex GX260
  • Run Windows XP SP3
  • have Dell 17 "monitors
  • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

  I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

  There are several ways to handle this.

  #1-have affected the power turn on their monitors, but let run PC
  #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
  #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

  I hope this helps.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.