computer startup laptop problem once again!

Similar Questions

• Computer HP laptop problem. Please help someone!

  Hi guys,.

  So basically, my computer HP laptop froze about three times today. I had to press the button reset each time. Finally, the computer came back the menu but has frozen immediately. I pressed the reset button again. This time, when I turn on the laptop the first thing that appears is the HP Logo and the "resumption of system preparation. After a while the screen goes white and after a while once again the HP logo comes again, but this time is not written and just a loop that goes round in circles. Nothing happens after that. I tried it turn on and shut off again, but the same thing happens.

  Does anyone know how can I fix? It seems that you must press F11 when you turn it on and go through a few options to make it work again? I have some pictures and music on there I'd like to keep, can I do this? Or do I need to clean the system? There not too important! Little help would be great if someone can give me some adivice on how to fix it!

  Thank you very much

  Hi Cammy, I'm back

  Press the ESC key at startup then F2 when the Start Menu is displayed, this will start the System Diagnostics, advise me the results.

  Redemarrer restart using the ESC for the Start Menu button, press the F11 key to the restoration of the system, do not press any other button unless he asks you to do.  Let it run for 15 minutes to see if any other measurement of the recovery process.

• wireless computer dv9410us laptop problem

  Someone at - it a fix for the problem computer dv9410us laptop wireless? Restore to factory for vista 32 bit and wireless card does not appear in Device Manager. Updated the bios and does not work.

  Hello:

  You have two choices, if you don't want to buy another laptop.

  1. buy a usb wireless adapter at low prices.

  2. replace the motherboard (not recommended). The power was cut on the mini-PCIe slot that's why your wireless card stop working.

  Problems of major motherboard dv6000/dv9000 notebooks.

  Paul

• Explorer 8 wants to udate 2530548 KB; It runs pretending to install each time restarting the computer so far appears once again completed the looks at all that I can find on the web no cure to settle

  It runs pretending to install: each time restarting the computer up to date appears again; I look at all, I can find no cure for installation is complete on the web.

  all others so far seem to fill. KB 2530548 tried to install several times. shows that I need to be updated after every stop.

  Hello

  In addition, check to see if this article helps you.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Two HP Pavilion Series computer G7 laptop problem!

  Hi all! It is my first time to post a thread, so correct me if I'm wrong. I am also a child of 15 years and I know how to take care of your laptop. I love HP so just to tell you all!

  So I had three laptops computers HP in the past, but the 1st is broken so I want to talk about the laptop of 2nd and 3rd.

  My 2nd laptop which is a HP Pavilion 1219wm g7, I had for over 2 and a half years and it was a good laptop until my father using a laptop, and when he was going to put in place, he accidentally dropped the laptop, then the other day I was looking to see if something was wrong, nothing was wrong that day until a week or two , the left hinge and the right hinge broke nails, so when I tried to open my laptop, it would make a lot of noise and push the hinges on, and also when the hinges were out, I figured that my laptop fan not working anymore, while I was searching for YouTube videos on how to disassemble a laptop as mine and so I don't , and when I got most everything out, I saw that the hinges were broken and nails went down, so I ask my dad to get out of the nails, but he said no because he had some color gold metal around the nail, I thought the hinges were pushing the laptop fan and watched the fan and I saw a few pieces of fan which are plastic fell off the coast and I erased the dust Too much. Open so now I reassembled the laptop and it still works and the fan of the laptop works also but instead, it made a lot of noise and vibrates the phone, but when I push the area where the fan is, it makes no noise, but when I let go, it emits noises, the laptop hinges I always leave my cell phone because I'm afraid to open again and he'll break a lot more thinking inside the laptop and when I'm not using it, I let the "Sleep" mode So basically the parts fan parts are broken and made a loud noise and vibrating a lot when not pushed and the left and right hinges of the screen LCD is broken. Any way to replace these parts?

  Now for my third laptop, this laptop has really no problem, but one thing I ask is I have ordered this laptop online on Amazon, which is this link here: http://www.amazon.com/gp/product/B009AU2JN2/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 . Anyway, I bought this laptop on May 17, 2014 and received may 27, 2014. It is called HP Pavilion g7-2240us. After the configuration of the laptop, I open HP Support Assistant, and then I get this message that says something like ' warranty HP is exceeded. I bought a new laptop and Standard warranty Start Date was on January 25, 2013, and Standard warranty end Date was February 28, 2014. So I thought that it was a problem because once you buy a laptop PC or laptop or something else, the guarantee starts automatically on that date. So all the ideas that is the problem?

  I know it was good, but I wanted to give you all the information I had and tell me if I need to say more!

  Thanks for the help!

  Hi Martin_Flores

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for your query.

  For the G7-1219wm Pavilion, I could not find a guide to maintenance and service to provide reference numbers.  However, here is a link to the HP parts store, where you try self-service option to locate parts and prices or contact them and they will be happy to help you.

  Now on the mandate. as with most products, they come with a warranty from the factory which is what you see. You must register the product from the date of purchase for HP will know when it was purchased.  Once all the required information is received, they will work on the update of the guarantee. Here is a link to register your product. HP product registration

  For convenience I'll send HP Pavilion computer g7-2240us laptop product specifications, so you can easily locate the product number.

• Unable to start the Vista computer, constantly shutting down once again

  I have to keep hitting the power button to the screen only lights so that it turns off again, again and again and more... It makes me crazy... It's a repair job shop or something I am doing wrong with a bad implementation... Thanks for any help... Ed McKenna

  * original title - why my screen always goes, black about 3 or 4 seconds after start *.

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• Comcast mail will not work on Mail.app PORT 995 problem once again!

  OK, so this problem has arisen in the last days.

  I can't send or receive mail from Comcast in Mail.app

  At first, it was the 995 problem, but now it just says:

  The server returned the error: the attempt to send data to the server "mail.comcast.net" failed.

  After three calls to Comcast, told me it's because Mail.app, because "Apple changed something in the application.

  Is not the thing the more ridiculous than you already heard? I have not updated anything either and to my knowledge, Apple is just change your app on your hard drive.

  Twice before, Comcast, once they have admitted that the problem was theirs, has been able to fix it. But not now.

  Yes I can get mail on the web, but it's stupid, and I need to use the POP email... I work online all day.

  They suggested one of the ports be changed from 587 to 465 but that doesn't work anymore. I use SSL with PW auth.

  I have set up scores of Mac for people and this isn't a problem with Mail.app, but a Comcast server problem that they will NOT admit.

  Anyone having this problem and what to do? I have about 50 other emails configured, are not those of the areas will on the same PIPE and using the VERY SAME SETTINGS to SEND?

  Have you tried the settings for IMAP e-mail? Or is your requirement such that you need POP?

  http://customer.Xfinity.com/help-and-support/Internet/email-client-programs-with - xfinity-email.

  How to set up a Comcast Email in Mail | CityMac

• computer keyboard laptop problem some keys

  Laptop: compaq presario cq62 core i5

  recently, some of my keys are are unresponsive or work when I press them. I have not spilled or left my laptop falling, but all of a sudden, my backspace,------, and various enter key will not respond when I try to use them. It is very annoying to not be able to use my back bar and it's bugging me! I tried my laptop for virus scanning, but nothing was found. I'm not sure if it could be a problem of circuit or something, but I need to fix, as soon as possible because I need my laptop for class. Help me please if anyone knows what may be the problem!

  Thank you!

  I guess it's a problem with the keyboard...

  the only thing you can try is to open your laptop and connected to search if the keyboard cable is always good, otherwise, you can install a new keyboard...

  recently, I had the same problem with my laptop, when I discovered that the display cable was not well connected...

• Can not turn on WiFi if it isn't already during computer startup laptop HP Pavilion G6

  1. number and product name
  HP Pavilian G6-1336SA

  2 operating system installed (if applicable)
  Windows 7 64 bit

  Usually, my Wifi works fine and the blue light comes on during startup and I can switch it switch using the F12 key.

  However, if my system starts the color is orange when WiFi is off, he's not the F12 key and activate the WiFi does not appear in the configuration options of Windows mobility.

  This is a problem that keeps coming back from time to time and is quite frustrating because I often have to reboot the system to operate.

  Any help would be greatly appreciated. Thank you

  Ensure that the BIOS is up to date here and the WiFi pilot is the most recent. He could have used a different wifi card installed during the manufacturing process, you may need to try each by using the most recent driver version. It could be a default WiFi card. If the option to turn on all together it is missing, which usually indicates a faulty WiFi card. Youl could also try reinstalling the wireless card listed on page 52 of this guide.

• Computer connection laptop problem - says password is incorrect

  Hello

  I have a small Acer aspire laptop V5 that I use to run windows applications a little when I can't use my office.  This has had 8 pre-installed windows.  I have upgraded to windows 8.1 and it ran OK for a few weeks.  However, now, when I try to log in (on the blue screen where it shows my name, e-mail address and has a box where I enter my password) it tells me my password is incorrect and to make sure that I use the password of my Microsoft account.  I do this, but it won't let me. I have not changed anything since I logged setting the machine a couple of weeks.

  There is no other way I know to get into my laptop, so it's actually a Clipboard.

  Anyone know of helpful advice?

  Any help appreciated - it's a Clipboard rather big and expensive to keep on my desk.

  Kind regards

  Hamish.

  Hamish salvation,

  Welcome to the Microsoft Community Forum.

  I understand that you can not login to your admin account. If it redirects you to account.live.com, I conclude that it is a Microsoft Account, which can be brought back online.

  Then I suggest that you refer to the following articles in order to recover your password.

  What to do if you forget your Windows password

  (See the link to reset your password ).

  Note: Ignore the suggestion to reinstall Windows at this time.

  You can also check this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Lenovo 3000 N500 Audio problem, once again... Mircosoft UAA Bus Driver For High Definition Audio

  I was checking some topics related to the same problem, and it seems that the problem has not yet been sovled. The problem is I removed vista and installed xp on my laptop (because vista sucks), and now the audio does not work. I tried to make it work for the past 2 days, I tried everything, but still, nothing happened. When I try to install audio driver, it says "installation of the driver fails, could not find the MEDIA device for this driver." Note that in Device Manager, there is no question mark about anything, there's only an exclamation point near "Mircosoft UAA Bus Driver for High Definition Audio". Any suggestions?

  Hey, I have just corrected the audio thing now, you need to download this:

  http://support.Microsoft.com/kb/888111

  after install you it, windows will catch a new sound driver and from there, you can use the audio driver package that lenovo has on their site. Good luck.

• I have the same problem once again, firefox does not correctly appear yahoo homepage

  I had this same problem about two months ago and someone here told me what to do. Unfortunately I do not write it down so I don't remember. I tried, tools-options - advance - General - unchecked use hardware acceleration when available... it did not work. Yahoo homepage looks fine on IE on Firefox, it's a mess. Someone please help.

  These can help you:

  Remove the navigation, search and download history on Firefox

  How to clear the cache of Firefox

• Error Page problems, once again

  So here's my .htaccess file:

  Of 400 index.php? page = error

  Of 401 index.php? page = error

  Of 403 index.php? page = error

  Of 404 index.php? page = error

  Of 500 index.php? page = error

  I tried this:

  Of 400 400. shtml

  Of 401 401.dans shtml

  Of 403 403 shtml

  Of 404 404.txt shtml

  Of 500 500. shtml

  and this:

  ErrorDocument 400 400.shtml

  ErrorDocument 401 401.shtml

  ErrorDocument 403 403.shtml

  ErrorDocument 404 404.shtml

  ErrorDocument 500 500.shtml

  and more... but no matter what I try, I get the same result. For example if I type:

  http://mywebsite.com/thisisanunrealpage.html

  I am redirected to a page that is displayed when the error document is loaded

  

  for that is displayed instead of the page actually. No matter what I type after the directive of 404

  If you are using XAMPP, it runs as an Apache module.

  I just looked to the top of my old copy of Apache Cookbook. The example he gives for ErrorDocument directive looks like this:

  ErrorDocument 405 /errors/notallowed.html

  Note that this is a relative path to the root of the error page. You probably need something like this:

  ErrorDocument 400 /mysite/index.php?page=error

• Wireless computer network laptop dv7 sometimes stuck out

  Hello.

  So, for a while, I had this problem with my laptop; sometimes without any reason my wireless 'goes out' and my laptop gets all the lag (trolling, mouse sound as well). In fact, the WiFi network is not extinguished, but only the blue light on my laptop turns red. Wlan exchange button the following message (on/wlan Wlan off) but no connection is established and it remains red, stuck like that.

  For a long time, I found the only way to solve this problem, to restart the computer. However, sometimes, it did not help until after two resets. Some time ago my brother was using my laptop and as the same problem has happened, he goes to the web settings and Control Panel, a list of all possible connections. Here as an administrator he removed using WiFi connection and then begins again, which fixed the problem. The connection has been made again, and the LAG was gone.

  Now, just before this announcement I had the problem once again and found a way of my brother to fix. Since that part, the problem is resolved, but I would like to know what causes this and how can I get rid of him? It's really frustrating when internet turns off randomly and I have a huge lag, so in the middle of something important. I never found anything like this online, searching around with Mr. Google and eventually sign up here to ask.

  Thank you in advance.

  Some information on the laptop:

  HP Pavilion DV7 VT362EA #UUW (no idea if that's the correct number ^^)

  Windows 7

  TL; DR

  Sometimes the wlan light turns red if the WiFi network has not yet been decided. Loss of connection and get a huge lag. Only difficulty is to reboot or remove wlan to use as an administrator.

  Ok. No, it looks like you did it correctly. I have a few other things for you to try so.

  1 to update the software Quick Lauch buttons. Restart and test the question. If you still get the same symptom, go to step 2.

  2. reinstall the wireless card. Here is the manual. Wireless (WLAN) card withdrawal begins on page 4-17. Make sure that the antenna wireless caps are broken pointing down when you put it back in. If you still get the same symptom, go to step 3.

  3. reset TCP/IP. Here is a link to the steps. It says XP at the top, but it's just a special note for XP users. Scroll up to the gray heading "I solve the problem" and then in the second below, subsection you will see the steps for Vista /7. Be sure to run as administrator command prompt.

  Let me know the results when you get a chance

• Startup MacBook Pro-comment problems prevent health going to disk/check once again

  My 13 inch Macbook Pro running OSX 10.9.5 (said mid-2012, but it was purchased in fall 2014) has had problems starting

  A few weeks ago the computer is stuck on the loading screen (white, with the Apple and the buffering of spinning icon) without marketing properly. After you have manually turned off and left for a long time he worked well on the next test, so I took care of it has been saved and so didn't think much, and it works pretty well in recent weeks, sometimes being a little slow but that very occasionally and not debilitatingly so and it probably is not related to this problem.

  This morning it was still once stuck on the loading screen, and try again in 5 or 6 times solves nothing. The VRAM reset did not help either. After an attempt to boot into safe mode (filled a little progress bar then disappeared and the computer continued to buffer without purpose), I once again reset the NVRAM and tried a different boot safe mode, with the same results. But this time I left it half an hour or so and on the next attempt (start normally) it miraculously worked a new and everything seems functional. After a new backup with a preparation period slightly extended backup (at least half an hour on the first abandoned attempt, then at least 15 minutes, until correct on the second trial has started), although it is common on my computer, I have enough fear turn the computer off and tempt fate again, if I want to see what can be done now.

  What should I do to check the health of the disk, potentially fix it, find out why this is happening and avoid this problem again in the future?

  I decided to watch from the disk utility and am confused by the Setup program. There is an 'APPLE HDD Media HTS541010A9E662' entry in the list, with a "MacIntoshHD" paragraph below, and both have different information displayed... I ran check disk on the higher level entry and it seems to be out very well ("the Volume Recovery HD seems to be OK"), but I haven't run one on the low level input as it says my computer may be "slow and unresponsive" while doing so, and I'm not entirely sure of what use there.

  It cannot be storage associated with as I stil have 610 gb of free 1 terra (although a large part of what I have (130 GB) is in the other category for a reason any).

  How to fix the slow down time and start. | MacTip.net

  Resolve startup issues and perform maintenance on disk with disk utility and fsck

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  Repair the hard drive and permissions - Yosemite, Mavericks, Cougar or Lion

  HD recovery start:

  Restart the computer after the ring, press in and hold the ORDER et R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Now, download and install the update of OS X Mavericks 10.9.5 (Combo)