Problem of decommissioning of 11204 11203 grid Infrastructure
Hi gurus,
I have a 2 RAC running on CentOS 64 bit 5.911203 node. In order to update to 11204, first I upgraded GI to 11204, and now I am trying to downgrade the back, just to have a restoration plan in place, before also moving the DB. My downgrade did not ($OLD_GRID_HOME/bin/crsctl start crs does nothing), so I'll try again because I think that I made a mistake when executing $NEW_GRID_HOME/crs/install/rootcrs.pl (I had executed it without the lastnode - on both nodes, and then I ran again in the node of the OCR) (, this time using the parameter - lastnode).
Everything is fine when I am running on node 2 (node no - OCR):
# /u01/app/11.2.0/grid_2/perl/bin/perl /u01/app/11.2.0/grid_2/crs/install/rootcrs.pl-downgrade - oldcrshome /u01/app/11.2.0/grid-version 11.2.0.3.0
(...)
CRS-2673: attempt to stop "ora.gpnpd" on "bat-cvracdb02.
CRS-2677: stop 'ora.gpnpd' on 'bat-cvracdb02' succeeded
CRS-2793: stop of the resources managed by Oracle high availability Services on "bat-cvracdb02" made
CRS-4133: Oracle high availability Services was arrested.
Downgraded successfully Oracle Clusterware stack on this node
But when I run it on node 1, in aid of lastnode (because that is the crux of the OCR), I get an error:
# /u01/app/11.2.0/grid_2/perl/bin/perl /u01/app/11.2.0/grid_2/crs/install/rootcrs.pl-downgrade lastnode - oldcrshome - /u01/app/11.2.0/grid-version 11.2.0.3.0
The file of configuration settings using: /u01/app/11.2.0/grid_2/crs/install/crsconfig_params
Not a version valid grid Infrastructure. The version is /u01/app/11.2.0/grid_2/crs/install/crsconfig_lib.pm line 9882.
Unfortunately, this error will return no results in google or MOS! ("Invalid... "), and this file (crsconfig_lib.pm) does not seem to help too, because in this line, I see only this:
validity of version #check
If (scalar (@ver)! = 5) {}
Die ("not a grid Infrastructure valid version. The resulting version is @ver");
}
trace ("version active CRS got: '.comes ('. ', @ver) '");
return @ver;
I also tried it with the - force parameter, but doesn't seem to change anything.
Any help with this downgrade will be highly appreciated.
Its at this point, I normally abandon on the downgrade and then completely remove GI and start from a new installation of the lower version. If you need information on the withdrawal of the GI, let me know.
See you soon,.
Brian
Tags: Database
Similar Questions
-
root.sh failed on rac node problem grid infrastructure 11 GR 2
Hi all
I am about to install 11 g (11.2.0.1) grid infrastructure on Linux racnode1.orasol.com 2.6.18 - 128.el5PAE #1 SMP Wed Jan 21 08:28:04 EDT 2009 i686 i686 i386 GNU/Linux 32-bit where I use the platform VMware VMware 10 of 2008. I'm sure I followed the installation instructions, but I can't get rid of the following error that occurs while I run the root.sh script. on the first node.Maybe this is a known problem or can anyone request includes what grid infrastructure. Thanks for any effort.
[root@racnode1 OraInstall2014-03-15_02-12-11 PM] # /u01/app/11.2.0/grid/root.sh
Run the script root.sh from Oracle 11 g...
The following environment variables are defined as:
ORACLE_OWNER = ora11g
ORACLE_HOME = /u01/app/11.2.0/grid
Enter the full path of the local bin directory: [/ usr/local/bin]:
Copying dbhome to usr...
Copying oraenv to usr...
Copying coraenv to usr...
Creating/etc/oratab file...
Entries will be added to the/etc/oratab file according to the needs of
Assistant configuration database when a database is created
Finished to turn the generic part of the root.sh script.
Now root product-specific actions will be performed.
2014-03-15 15:39:58: the analysis of the host name
2014-03-15 15:39:58: verification of superuser privileges
2014-03-15 15:39:58: user has superuser privileges
The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Create the trace directory
ADD LOCAL MODE
Creating OCR keys for the user "root", "root"... privgrp
Successful operation.
portfolio of root
root cert portfolio
export certificate root
portfolio for peer
Pocket player profile
portfolio of PA
portfolio peer keys
portfolio PA keys
cert request peer
PA cert request
CERT peer
CERT PA
peer TP root cert
CERT of profile TP root drive
PA TP root cert
CERT of peers pa TP
CERT of peers PA TP
CERT of pa TP player profile
profile peer player TP CERT
CERT user peer
CERT user PA
Adding to inittab demon
CRS-4123: Oracle high availability Services started.
starts ohasd
CRS-2672: attempt to start 'ora.gipcd' on 'racnode1 '.
CRS-2672: attempt to start 'ora.mdnsd' on 'racnode1 '.
CRS-2676: beginning of 'ora.mdnsd', 'racnode1' succeeded
CRS-2676: beginning of 'ora.gipcd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.gpnpd' on 'racnode1 '.
CRS-2676: beginning of 'ora.gpnpd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.cssdmonitor' on 'racnode1 '.
CRS-2676: beginning of 'ora.cssdmonitor', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.cssd' on 'racnode1 '.
CRS-2672: attempt to start 'ora.diskmon' on 'racnode1 '.
CRS-2676: beginning of 'ora.diskmon', 'racnode1' succeeded
CRS-2676: beginning of 'ora.cssd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.ctssd' on 'racnode1 '.
CRS-2676: beginning of 'ora.ctssd', 'racnode1' succeeded
ASM created and launched successfully.
DATA DiskGroup created successfully.
clscfg:-install the specified mode
Successfully accumulated necessary OCR keys.
Creating OCR keys for the user "root", "root"... privgrp
Successful operation.
CRS-2672: attempt to start 'ora.crsd' on 'racnode1 '.
CRS-2676: beginning of 'ora.crsd', 'racnode1' succeeded
CRS-4256: profile update
Successfully added to disk 88720477d0534f9fbf3b74c2f0ac8b46 to vote.
Managed to replace voting disk group with + DATA.
CRS-4256: profile update
CRS-4266: Vote or managed to replace the files
# File group universal name Id disk STATE file
-- ----- ----------------- --------- ---------
1. online 88720477d0534f9fbf3b74c2f0ac8b46 (/ dev/oracleasm/disks/ASMDISK1) [DATA]
Located at 1 vote (s) disk.
CRS-2673: attempt to stop 'ora.crsd' on 'racnode1 '.
CRS-2677: stop 'ora.crsd' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.asm' on 'racnode1 '.
CRS-2677: stop 'ora.asm' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.ctssd' on 'racnode1 '.
CRS-2677: stop 'ora.ctssd' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.cssdmonitor' on 'racnode1 '.
CRS-2677: stop 'ora.cssdmonitor' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.cssd' on 'racnode1 '.
CRS-2677: stop 'ora.cssd' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.gpnpd' on 'racnode1 '.
CRS-2677: stop 'ora.gpnpd' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.gipcd' on 'racnode1 '.
CRS-2677: stop 'ora.gipcd' on 'racnode1' succeeded
CRS-2673: attempt to stop 'ora.mdnsd' on 'racnode1 '.
CRS-2677: stop 'ora.mdnsd' on 'racnode1' succeeded
CRS-2672: attempt to start 'ora.mdnsd' on 'racnode1 '.
CRS-2676: beginning of 'ora.mdnsd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.gipcd' on 'racnode1 '.
CRS-2676: beginning of 'ora.gipcd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.gpnpd' on 'racnode1 '.
CRS-2676: beginning of 'ora.gpnpd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.cssdmonitor' on 'racnode1 '.
CRS-2676: beginning of 'ora.cssdmonitor', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.cssd' on 'racnode1 '.
CRS-2672: attempt to start 'ora.diskmon' on 'racnode1 '.
CRS-2676: beginning of 'ora.diskmon', 'racnode1' succeeded
CRS-2676: beginning of 'ora.cssd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.ctssd' on 'racnode1 '.
CRS-2676: beginning of 'ora.ctssd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.asm' on 'racnode1 '.
CRS-2676: beginning of 'ora.asm', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.crsd' on 'racnode1 '.
CRS-2676: beginning of 'ora.crsd', 'racnode1' succeeded
CRS-2672: attempt to start 'ora.evmd' on 'racnode1 '.
CRS-2676: beginning of 'ora.evmd', 'racnode1' succeeded
CRS-0184: unable to communicate with the demon of the CRS.
RPRC-1070: could not verify if the ora.asm resource is registered
Cannot communicate with crsd
Add asm... failed
clsr_start_dg returns error to loc: 70 rc = 0
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4000: Create command has failed, or completed with errors.
create diskgroup DATA... failed
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4000: added command failed, or completed with errors.
Return code of 1 (256) of control: /u01/app/11.2.0/grid/bin/crsctl add type basetype - files ora.local_resource.type-/u01/app/11.2.0/grid/crs/template/registry.acfs.type ora.registry.acfs.type
Add ora.registry.acfs.type... failed
RPRC-1070: could not verify if the ora.net1.network resource is registered
Cannot communicate with crsd
Add scan = rac - scan.orasol.com... failed
Configure Grid Infrastructure for a Cluster Oracle... failed
Update the inventory of properties for clusterware
From Oracle Universal Installer...
Check the swap space: must be greater than 500 MB. Real 4996 MB passed
The pointer of the inventory is to /etc/oraInst.loc
The inventory is located at/u01/app/oraInventory
'UpdateNodeList' succeeded.
[root@racnode1 oraagent_ora11g] # cat oraagent_ora11g.log > > > > > > >
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2014-03-22 22:04:43.702: [AGENT] [3045107408] ENV level Logging for Module: 1 AGENT
2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: AGFW 0
2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: CLSFRAME 0
2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: CLSVER 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CLUCLS 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: COMMCRS 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: COMMNS 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSAPP 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCCL 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCEVT 0
2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCOMM 0
2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSD 0
2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSEVT 0
2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSMAIN 0
2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSOCR 0
2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSPE 0
2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSPLACE 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRES 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRPT 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRTI 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSSE 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSSEC 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSTIMER 0
2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSUI 0
2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: CSSCLNT 0
2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRAPI 1
2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRASM 1
2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRCAC 1
2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRCLI 1
2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRMAS 1
2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRMSG 1
2014-03-22 22:04:43.709: [AGENT] [3045107408] ENV level Logging for Module: OCROSD 1
2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRRAW 1
2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRSRV 1
2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRUTL 1
2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: SuiteTes 1
2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: UiServer 0
2014-03-22 22:04:43.710: [AGFW] [3045107408] starting agent: /u01/app/11.2.0/grid/log/racnode1/agent/crsd/oraagent_ora11g/
2014-03-22 22:04:43.711: framework Agent [AGENT] [3045107408] initialized, process Id = 6506
2014-03-22 22:04:43.876: /u01/app/11.2.0/grid crsHome Utils::getCrsHome [USRTHRD] [3045107408]
2014-03-22 22:04:43.878: [USRTHRD] [3045107408] Process::convertPidToString pid = 6506
2014-03-22 22:04:43.884: [CLSFRAME] [3045107408] Inited lsf context 0xadf9fc8
2014-03-22 22:04:43.885: [CLSFRAME] [3045107408] Initing CLS framework messaging
2014-03-22 22:04:43.887: State of new framework [CLSFRAME] [3045107408]: 2
2014-03-22 22:04:43.887: [CLSFRAME] [3045107408] M2M begins...
2014-03-22 22:04:43.904: [CRSCOMM] [3045107408] m_pClscCtx = 0xadfccb8m_pUgblm = 0xae00318
2014-03-22 22:04:43.905: [CRSCOMM] [3045107408] start send thread
2014-03-22 22:04:43.907: [CRSCOMM] [3010943888] clsIpc: sendWork thread started.
2014-03-22 22:04:44.325: clsc_connect [COMMCRS] [3044768656]: (0xaeeda00) no listener to (ADDRESS = (PROTOCOL = IPC) (KEY = CRSD_IPC_SOCKET_11))
2014-03-22 22:04:44.326: [CRSCOMM] [3045107408] [FFAIL] failed to connect to (ADDRESS = (PROTOCOL = IPC) (KEY = CRSD_IPC_SOCKET_11)) ret = 9
2014-03-22 22:04:44.326: [CLSFRAME] [3045107408] failure to the CPI to connect to the server: 2
2014-03-22 22:04:44.326: [CLSFRAME] [3045107408] failed to start - intermodules comms: 1
2014-03-22 22:04:44.330: [AGFW] [3045107408] alert creation: (: CRSAGF00120 :): Agent Framework could not be started: 1).
2014-03-22 22:04:44.330: gipcShutdownF [GIPCXCPT] [3045107408]: jumping stop, count 1, of [clsnOraAgent.cpp: 82], ret gipcretSuccess (0)
2014-03-22 22:04:44.339: [AGFW] [3045107408] Agent comes out with exit code: 1
Hi Vandana,
Thanks for your time.
I commented the line on which the IP 127.0.0.1 is shown in/etc/hosts on all nodes.
file/etc/hosts is same nodes.when I do a ping to the public ip address, it is show the IP local hots i'e 127.0.0.1 not the real that I craved in the file/etc/hosts.
After that I comment that line of hole and he ping is resolved.
Regrads,
Malik Tanveer
-
I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7
It's my environment:
VM VirtualBox
OS: Linux to Oracle 7
RAM: 2G
CPU: 1 outlet | 2 carrots
OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.
Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure
Installation type: SServer tandalone.
The installation user: uid = 501 (oracle)
installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.
Put ASM implementation with Linux e/s Standard (No. ASMLib).
The virtual machine has 3 disks attached.
Features: / dev/sdb, / dev/sdc, / dev/sdd
I ran to related records:
# / bin / / dev/raw/raw1 gross/dev/sdb1
# / bin / / dev/raw/raw2 gross/dev/sdc1
# / bin / / dev/raw/raw3 gross/dev/sdd1
# raw - qa
/ dev/RAW/raw1: linked main 8, minor 17
/ dev/RAW/raw2: linked main 8, minor 33
/ dev/RAW/raw3: linked main 8, minor 49
Also, I have configured the following command to set permanent configuration:
#vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules
ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".
ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".
ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".
# set permissions on these discs for the owner of the Oracle user.
ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "
NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.
BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb
BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1
BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc
BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1
BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd
BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1
This happens whenever I restart the server.
But authorities are good when I run # ls - lrt/dev/raw/raw *.
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3
Problem: when running script $GRID_HOME/root.sh.
Adding Clusterware entries to inittab
ohasd could not start
Cannot start the Clusterware. Last 20 lines of the trace log alert:
2015 08-19 02:15:24.442:
[client (7260)] CRS-2101: the RSC has been formatted using version 3.
2015 08-19 02:15:28.238:
[client (7283)] CRS-1001: the OCR has been formatted using version 3.
ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4
failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install
Please help me.
Geraldo Peralta
Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931
Under the Options deprecated for Oracle RAC 11 g Release 2:
"Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »
Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/
HTH,
Brian -
Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.
Hi all
We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.
I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.
can anyone share the ID document or information related to it.
If OS RHEL 6 update 4 to 6-7 update patch
(1) is it compatible
(2) bugs or problems reported
(3) in addition to the binary link again than the DBA to perform any other
Thank you
Hello
6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4
Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)
-Jonathan Rolland
-
"opatch" failed when applying "PSU 16083653" to grid infrastructure home.
Hello
ENV: Oracle Grid below 11 GR 2 (11.2.0.3) on OEL 5.8 32-bit
I installed grid Infrastructure 11 GR 2 (11.2.0.3) on the server of OEL 32-bit ('Software Only' option).
I applied PSU 16083653 IM home. I downloaded the last OPatch and when I check the opatch version, here is what I get:
[oracle@srvm58-1 OPatch_32bit] $ $ORACLE_HOME/OPatch/opatch version
OPatch Version: 11.2.0.3.6
OPatch succeeded.
[oracle@srvm58-1 OPatch] $ $ORACLE_HOME/OPatch/opatch lsinventory
Setup Oracle interim Patch version 11.2.0.3.6
Copyright (c) 2013, Oracle Corporation. All rights reserved.
Oracle home: /u01/app/11.2.0.3/grid
Inventory Center: / u01/app/oracle/oraInventory
from: /u01/app/11.2.0.3/grid/oraInst.loc
OPatch version: 11.2.0.3.6
YES version: 11.2.0.3.0
Location of the log file: /u01/app/11.2.0.3/grid/cfgtoollogs/opatch/opatch2014-02-03_15-57-24PM_1.log
Location of the output file Lsinventory: /u01/app/11.2.0.3/grid/cfgtoollogs/opatch/lsinv/lsinventory2014-02-03_15-57-24PM.txt
--------------------------------------------------------------------------------
Installed products of higher level (1):
Oracle Grid Infrastructure 11.2.0.3.0
There are 1 product (s) installed in the home of Oracle.
There is no temporary patch installed in this House of Oracle.
--------------------------------------------------------------------------------
OPatch succeeded.
[oracle@srvm58-1 OPatch] $
When I tried to apply the PSU, I get the following errors:
[root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641-oh /u01/app/11.2.0.3/grid
Execution of /u01/app/11.2.0.3/grid/perl/bin/perl./crs/patch11203.pl - patchdir /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653 - patchn 16315641 - oh /u01/app/11.2.0.3/grid - paramfile /u01/app/11.2.0.3/grid/crs/install/crsconfig_params
It is the main log file: /u01/app/11.2.0.3/grid/cfgtoollogs/opatchauto2014-02-03_17-46-03.log
This file shows your detected configuration and all the steps that opatchauto tried to do it on your system:
/U01/app/11.2.0.3/grid/cfgtoollogs/opatchauto2014-02-03_17-46-03.report.log
2014-02-03 17:46:03: starting installation of Patch Oracle Restart
The file of configuration settings using: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params
Enter 'Yes' If you have unpacked this patch to an empty directory to move forward (yes/no): Yes
Enter 'Yes' If you have unpacked this patch to an empty directory to move forward (yes/no): Yes
OPatch comes with the CMO, enter the path to the absolute response CMO file:
/U01/app/11.2.0.3/grid/OPatch
The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/custom failed for /u01/app/11.2.0.3/grid
The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/etc failed for /u01/app/11.2.0.3/grid
The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/files failed for /u01/app/11.2.0.3/grid
Check failure of version Opatch for oracle /u01/app/11.2.0.3/grid House
Version check Opatch failed
ERROR: update version opatch for households failed and retry
Automatic opatch failed.
[root@srvm58-1 OPatch] #.
OPatch is already a more recent version. Help, please!
OK I solved the problem. The error I was getting is misleading.
I did two things:
1. for the root user: "export PATH=$PATH:/u01/app/11.2.0.3/grid/OPatch".
2. thanks to the solution provided by 'Papp Balázs' in the post:
confuse OPatch error PSU 13919095 (July 2012)
I removed the location correct patch and re-issued the command like this:
[root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653-oh /u01/app/11.2.0.3/grid - ocmrf /u01/app/11.2.0.3/grid/OPatch/ocm.rsp
instead:
[root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_1608365316315641 - oh /u01/app/11.2.0.3/grid - ocmrf /u01/app/11.2.0.3/grid/OPatch/ocm.rsp
all right.
-
Grid Infrastructure 11.2 Install - network
Hello
I need some clarification on the installation of grid Infrastructure (RAC).
How the network (IPs) is the installer...
Public, private, VIP and SCAN
In my setup here is what I currently have, just an example:
# Public
17.0.0.32 linux1.domain.com linux1
17.0.0.34 linux2.domain.com linux2
# Private
17.0.2.32 linux1 - priv.domain.com linux1-priv
17.0.2.34 linux2 - priv.domain.com linux2.priv
# VIP
17.0.4.32 linux1 - vip.domain.com linux1-vip
17.0.4.34 vip.domain.com - linux2 linux2-vip
# SCAN
17.0.0.125 linux-scan
When you use this configuration of network, I got the below error:
[INS-40931] The following nodes have interface that are configured on a
different subnet from the subnet SCAN:
[linux1 - vip.domain.com, linux2 - vip.domain.com].
Note:
I have other servers configured like this, but don't use do not scan and they work; Although they are version 11.1.
My question is, having VIP on the same subnet public IP address with security problems, such as my network guy's doubt this.
I have proposed, he created the below:
17.0.0.35 linux1 - vip.domain.com linux1-vip
17.0.0.36 vip.domain.com - linux2 linux2-vip
Is this right according to install 11.2?
Thank you.
Hello
As I said that I asked network make VIP on the same subnet as the IP SCAN and the Public.
That's all.
Now, it looks like this:
17.0.0.35 linux1 - vip.domain.com linux1-vip
17.0.0.36 linux2 - linux2-vip vip.domain.com
Thank you.
-
11g grid Infrastructure crashes to check umask
Hi all
Operating system: Solaris 10
Version of grid Infrastructure: 11.2.0.1
11g grid Infrastructure installation hangs at 97% while checking the umask.
After Googling, I run runclufy and it crashes after "result:"grid"the user is not part of the group 'root'." Last check"
Kindly let me know what I missed.
bash-3. 00$./runcluvfy.sh stage pre - crsinst - oamrepo1, oamrepo2 n - correction-verbose
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node 'oamrepo1 '.
Accessible destination node?
------------------------------------ ------------------------
oamrepo2 Yes
oamrepo1 Yes
Result: Check accessibility node from node 'oamrepo1 '.
Verify the equivalence of the user...
Check: Equivalence for the user "grid."
Comment by node name
------------------------------------ ------------------------
oamrepo2 spent
oamrepo1 spent
Result: Use CONTROL passed to user equivalence "grid."
Verify node connectivity...
Checking the configuration of the hosts file...
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 spent
oamrepo1 spent
The hosts config file verification successful
Interface of the node information to "oamrepo2".
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
e1000g0 192.168.2.72 192.168.2.0 UNKNOWN 00 192.168.2.72: 0C: 29:E7:15:A2 1500
e1000g1 192.168.1.72 192.168.1.0 192.168.1.72 UNKNOWN 00: 0C: 29:E7:15:AC 1500
Interface of the node information to "oamrepo1".
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
e1000g0 192.168.2.71 192.168.2.0 UNKNOWN 00 192.168.2.71: 0C: 29:12:F4:EA 1500
e1000g1 192.168.1.71 192.168.1.0 192.168.1.71 UNKNOWN 00: 0C: 29:12:F4:F4 1500
Check: Subnet node connectivity "192.168.2.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo2:e1000g0 oamrepo1:e1000g0 Yes
Result: Connectivity node passed to subnet "192.168.2.0' with one or more nodes oamrepo2, oamrepo1
Check: The subnet "192.168.2.0 TCP connectivity.
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo1:192.168.2.71 oamrepo2:192.168.2.72 spent
Result: Check of TCP connectivity spent for subnet "192.168.2.0.
Check: Subnet node connectivity "192.168.1.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo2:e1000g1 oamrepo1:e1000g1 Yes
Result: Connectivity node passed to subnet "192.168.1.0" with one or more nodes oamrepo2, oamrepo1
Check: The subnet "192.168.1.0" TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo1:192.168.1.71 oamrepo2:192.168.1.72 spent
Result: Check of TCP connectivity spent for subnet "192.168.1.0.
The interfaces on the subnet "192.168.2.0" who are likely candidates for a private interconnection are:
oamrepo2 e1000g0:192.168.2.72
oamrepo1 e1000g0:192.168.2.71
The interfaces on the subnet "192.168.1.0" who are likely candidates for a private interconnection are:
oamrepo2 e1000g1:192.168.1.72
oamrepo1 e1000g1:192.168.1.71
CAUTION:
Could not find an appropriate interface for the VIP range
Result: Check connectivity node passed
Check: Total memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 spent 1.5 GB (1572864,0 KB) / 3GB (3145728,0 KB)
oamrepo1 spent 1.5 GB (1572864,0 KB) / 3GB (3145728,0 KB)
Result: The total past memory check
Check: Available memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
transmitted oamrepo2 Go 2,3972 (2513648,0 KB) 50 MB (51200,0 KB)
transmitted oamrepo1 Go 2,1475 (2251808,0 KB) 50 MB (51200,0 KB)
Result: Available past memory check
Check: Swap space
Name of node available comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Go 4,0064 (4200992,0 KB) transmitted from 3 GB (3145728,0 KB)
oamrepo1 Go 4,0064 (4200992,0 KB) transmitted from 3 GB (3145728,0 KB)
Result: Check the Swap space past
Check: Disk space for "oamrepo2: / var/tmp / '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
/ var/tmp/oamrepo2 / 2,9798 GB 1 GB spent
Result: Free past to check the disk space ' oamrepo2: / var/tmp / '.
Check: Disk space for "oamrepo1: / var/tmp / '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
/ var/tmp/oamrepo1 / 2,9802 GB 1 GB spent
Result: Free past to check the disk space ' oamrepo1: / var/tmp / '.
Check: Existence of user for "grid".
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 exists (1002) past
oamrepo1 exists (1002) past
Check for multiple users with the value of the UID 1002
Result: Check for multiple users with the value of the UID 1002 spent
Result: Use existence CONTROL passed to 'grid '.
Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 are past
oamrepo1 are past
Result: Existence of group check passed for "oinstall".
Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 are past
oamrepo1 are past
Result: Existence of group check passed for "dba".
Check: the members of the user 'grid' group 'oinstall' [primary]
Name of node user is group is user in the main group comment
---------------- ------------ ------------ ------------ ------------ ------------
oamrepo2 Yes Yes Yes Yes past
oamrepo1 Yes Yes Yes Yes past
Result: Membership search for "grid" user in the group 'oinstall' [as Primary] spent
Check: Membership of the user "grid" in a group 'dba '.
Name of node user is group is user in the comments group
---------------- ------------ ------------ ------------ ----------------
oamrepo2 Yes Yes failed
oamrepo1 Yes Yes failed
Result: Membership check for user "grid" group 'dba' failed
Tick: Run level
Name of the node run level comment required
------------ ------------------------ ------------------------ ----------
3 3 oamrepo2 spent
3 3 oamrepo1 spent
Result: Run control the level of the past
Check: Hard limits for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
hard oamrepo2 65536 65536 spent
hard oamrepo1 65536 65536 spent
Result: Verification of limits hard to last for "maximum open file descriptors.
Check: Limits Soft for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
past 65536 1024 oamrepo2 soft
past 65536 1024 oamrepo1 soft
Result: Soft limits check passed for "file descriptors open maximum".
Check: Hard limits for "maximum user processes.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
hard oamrepo2 16384 16384 spent
hard oamrepo1 16384 16384 spent
Result: Verification of limits hard to last for "maximum user process.
Check: Limits Soft for "maximum user process.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
sweet oamrepo2 16384 2047 spent
sweet oamrepo1 16384 2047 spent
Result: Soft limits check passed for "maximum user process.
Control: System Architecture
Name of node available comment required
------------ ------------------------ ------------------------ ----------
64 - bit amd64 oamrepo2 kernel modules 64-bit amd64 kernel modules past
64 - bit amd64 oamrepo1 kernel modules 64-bit amd64 kernel modules past
Result: Verification of the system architecture past
Control: Kernel Version
Name of node available comment required
------------ ------------------------ ------------------------ ----------
5.10 - 2010.08.11.10.15 5.10 - 2008.10 spent oamrepo2
5.10 - 2010.08.11.10.15 5.10 - 2008.10 spent oamrepo1
Result: Last kernel version control
Check: Kernel parameter for "Project.Max - sem - ids".
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 128 100 spent
oamrepo1 128 100 spent
Result: Check of kernel parameter passed to "Project.Max - sem - ids".
Check: Kernel parameter for "Process.Max - sem-nsems.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 512 256 spent
oamrepo1 512 256 spent
Result: Check of kernel parameter passed to "Process.Max - sem-nsems.
Check: Kernel parameter for "Project.Max - shm-memory".
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
4294967295 4294967296 oamrepo2 spent
4294967295 4294967296 oamrepo1 spent
Result: Check of kernel parameter passed to "Project.Max - shm-memory".
Check: Kernel parameter for "Project.Max - shm - ids".
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 128 100 spent
oamrepo1 128 100 spent
Result: Check of kernel parameter passed to "Project.Max - shm - ids".
Check: Existence of package for 'SUNWarc-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWarc - 11.10.0 - 2005.01.21.16.34 SUNWarc...
past oamrepo1 SUNWarc - 11.10.0 - 2005.01.21.16.34 SUNWarc...
Result: Package of checking for 'SUNWarc-... »
Check: Existence of package for 'SUNWbtool-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWbtool - 11.10.0 - 2005.01.21.16.34 SUNWbtool...
past oamrepo1 SUNWbtool - 11.10.0 - 2005.01.21.16.34 SUNWbtool...
Result: Package of checking for 'SUNWbtool-... »
Check: Existence of package for 'SUNWhea-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWhea - 11.10.0 - 2005.01.21.16.34 SUNWhea...
past oamrepo1 SUNWhea - 11.10.0 - 2005.01.21.16.34 SUNWhea...
Result: Package of checking for 'SUNWhea-... »
Check: Existence of package for 'SUNWlibm-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past 5.10 - SUNWlibm - 2004.12.18 SUNWlibm oamrepo2...
past 5.10 - SUNWlibm - 2004.12.18 SUNWlibm oamrepo1...
Result: Package of checking for 'SUNWlibm-... »
Check: Existence of package for 'SUNWlibms-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWlibms - 5.10 - 2004.11.23 SUNWlibms...
past oamrepo1 SUNWlibms - 5.10 - 2004.11.23 SUNWlibms...
Result: Package of checking for 'SUNWlibms-... »
Check: Existence of package for 'SUNWsprot-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past 5.10 - SUNWsprot - 2004.12.18 SUNWsprot oamrepo2...
past 5.10 - SUNWsprot - 2004.12.18 SUNWsprot oamrepo1...
Result: Package of checking for 'SUNWsprot-... »
Check: Existence of package for 'SUNWtoo-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past SUNWtoo - 11.10.0 - SUNWtoo 2005.01.21.16.34 oamrepo2...
past SUNWtoo - 11.10.0 - SUNWtoo 2005.01.21.16.34 oamrepo1...
Result: Package of checking for 'SUNWtoo-... »
Check: Existence of package for 'SUNWi1of-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWi1of - 6.6.2.7400 - 0.2004.12.15 SUNWi1of...
past oamrepo1 SUNWi1of - 6.6.2.7400 - 0.2004.12.15 SUNWi1of...
Result: Package of checking for 'SUNWi1of-... »
Check: Existence of package for 'SUNWxwfnt...' »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWxwfnt - 6.6.2.7400 - 0.2004.12.15 SUNWxwfnt...
past oamrepo1 SUNWxwfnt - 6.6.2.7400 - 0.2004.12.15 SUNWxwfnt...
Result: Package of checking for 'SUNWxwfnt...' »
Check: Existence of package for 'SUNWlibC-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past 5.10 - SUNWlibC - 2004.12.20 SUNWlibC oamrepo2...
past 5.10 - SUNWlibC - 2004.12.20 SUNWlibC oamrepo1...
Result: Package of checking for 'SUNWlibC-... »
Check: Existence of package for 'SUNWcsl-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWcsl - 11.10.0 - 2005.01.21.16.34 SUNWcsl...
past oamrepo1 SUNWcsl - 11.10.0 - 2005.01.21.16.34 SUNWcsl...
Result: Package of checking for 'SUNWcsl-... »
Check: the operating system patch for " " Patch 139575 -03"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 139556 -08 Patch 139575 past-03
oamrepo1 Patch 139556 -08 Patch 139575 past-03
Result: check the system operation patch passed for " " Patch 139575 -03"
Check: the operating system patch for " " Patch 139556 -08"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 139556 -08 Patch 139556 past-08
oamrepo1 Patch 139556 -08 Patch 139556 past-08
Result: check the system operation patch passed for " " Patch 139556 -08"
Check: the operating system patch for " " Patch 137104 -02"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 141445 -09 Patch 137104 past-02
oamrepo1 Patch 141445 -09 Patch 137104 past-02
Result: check the system operation patch passed for " " Patch 137104 -02"
Check: the operating system patch for " " 120754 patch -06"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 120754 patch -07 120754 patch past-06
oamrepo1 120754 patch -07 120754 patch past-06
Result: check the system operation patch passed for " " 120754 patch -06"
Check: the operating system patch for " " Patch 119961 -05"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 119961 -06 Patch 119961 past-05
oamrepo1 Patch 119961 -06 Patch 119961 past-05
Result: check the system operation patch passed for " " Patch 119961 -05"
Check: the operating system patch for " " Patch 119964 -14"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 119964 -21 Patch 119964 past-14
oamrepo1 Patch 119964 -21 Patch 119964 past-14
Result: check the system operation patch passed for " " Patch 119964 -14"
Check for multiple users with the value of the UID 0
Result: Check for multiple users with the value of the UID 0 past
Check: The current group ID
Result: Control of current past group ID
Base file name consistency check model...
Check the consistency of spent Core file name pattern.
Check to make sure that the user "grid" is not in the group "root".
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 there is not past
oamrepo1 there is not past
Result: User "grid" is not part of the "root" group Check the past
--
Bala
Hi all
Problem solved.
I am running seperaely conditions of ".". "/ runInstaller - executePrereqs '
then installed using ". / runInstaller - ignorePrereq", which ignores the check prerequisites.
--
See you soon,.
Bala
-
Hi all
I try to install the 11.2.0.2 RDBMS binary on 11.2.0.3.0 grid Infrastructure, the RDBMS installation I got the error below. Please let me know the correct procedure to ignore this problem and provide me with any id note MOS.
Error message:
An internal error occurred in audit of cluster
ERRORMSG (Linux): PRVF-5300: unable to retrieve the active version for CRS on this node
OS: RHEL5.6
Thank youRun the installation as
. / runInstaller - ignorePrereq
or you can also see below note,.
http://blog.ronnyegner-consulting.de/2011/10/13/PRVF-5300-failed-to-retrieve-active-cluster-version-for-CRS-on-this-node-when-installing-11-2-0-2-DB-on-11-2-0-3-0-grid-infrastructure/ -
Specify Network Interface usage
Name of the interface: eth0 subnet: 192.168.1.0 Public
Name of the interface: eth1 subnet: 192.168.1.0 private
By using advanced-> Installation
No GNS->
I'm getting an error [ins-41113] specified public and private interfaces are configured on the same subnet: 192.168.1.0 why it is a mistake because the Oracle e17212/typinst.htm Documentation says the following:
A unique name of Acess customer (SCAN) for the group, including the following features:
* Three IP; but I want to use only two static IP address, because I don't use DNS I use the file/etc/hosts.
* On the same subnet as all other public IP addresses, VIP, and SCAN processes.
Please advise because I was able to install the 11.2.0.2 grid Infrastructure using the same configuration with no problems. Now that I'm using Oracle 11.2.0.3 I encounter this problem.Levi,
Thank you.
I changed the subnet on each CCR node so that the public and the private sector have their own path to the distinctive network offering significant performance improvements.
Node 1 eth0 192.168.1.12
Node 1 eth1 192.168.2.13Node 2 eth0 192.168.1.14
Node 2 eth1 192.168.1.15And then silence grid Infrastructure 11.2.0.3 successfully installed.
Once again thank you very much!
-
ASM for grid Infrastructure upgrade failed with the INS 20802
Hello
I am updating an ASM 10 g to the grid infrastructure.
In fact, I have a DB running with ASM times on 10.2.0.4 on Windows 2008 R2 64-bit server.
And try to upgrade with 11 GR 2 grid Infrastructure.
Both ASM and DB instance stopped, and I have also try with the listener stops and even without earphone.
When I run the installer of the grid, he suggest me to do an upgrade of the Grid Infrastructure, it automatically detect the current ASM instance INS-40413 existing ASM insctance detected
Installation is OK but when you have to configure Oracle Grid Infrastructure for a stand-alone server, it stops with the Configuration of the Infrastructure of grid on the INS 20802 failed.
This is the last line of the newspaper.
****************************************************************************************************************************************
INFO: C:\Users\oraadm\AppData\Local\Temp\2 > D:\Oracle\product\11.2.0\grid/perl/bin/perl-ID:\Oracle\product\11.2.0\grid\perl\lib-ID:\Oracle\product\11.2.0\grid\crs\install D:\Oracle\product\11.2.0\grid\crs\install\roothas.pl-mise at level
INFO: 2011-11-24 17:02:45: verification of superuser privileges
INFO: 2011-11-24 17:02:45: oraadm groupName = administrators = superuser
INFO: 2011-11-24 17:02:45: domain READ = user = ORAADM
INFO: 2011-11-24 17:02:45: user has privileges oraadm
INFO: 2011-11-24 17:02:45: analyzing the host name
INFO: Using configuration settings file: D:\Oracle\product\11.2.0\grid\crs\install\crsconfig_params
INFO: Create the trace directory
INFO:
INFO: C:\Users\oraadm\AppData\Local\Temp\2 > exit/b 1
CAUTION:
INFO:
INFO: Finished Plugin named: Configuration of the Network Infrastructure
****************************************************************************************************************************************
Really need help if someone can give me with.
Concerning
AnthonyHello
I have encountered this same problem when I install and upgrade at the same time.
I do this step:
1 delete the Instance Service + ASM using oradim
2. remove the CSSD, using "localconfig.bat", in my case not work... so I forced remove with the utility 'sc' to windows.
3. restart the server
4. Add the CSSD, using 'localconfig.bat '.
5 Add the ASM instance using "oradim.
6a started earpiece and ASM and all Disksgroups.So I performed installation and upgrade ASM and listeners arrived... the program YES care of everything.
When to remove a service in Windows env, you must restart the server to ensure good cleaning of all disabled services Oracle and/or disassembled elements always reside in memory.
The OracleOHservice is started and the check said that the service is online but a css check crsctl return failure CRS-4530 Communications communicating with the synchronization of Services Cluster demon.
Please post here alert.log and %GRID_HOME%\log\ ocssd.log
Levi Pereira
-
ASMCA need to Oracle Grid Infrastructure Configuration ASM - 11 GR 2 on SLES11
Hello
I try to install 11 GR 2 ASM on a new server SLES11. So far I have correctly installed the database software, but the bad now when it comes to install the grid Infrastructure.
Partitioning and stamping the discs as ASM disks worked fine, oracleasm listdisks give me my disknames as output.
So far so good - in the setup of the network infrastructure, I chose "install and configure the network for a stand-alone server infrastructure."
The installation worked, I executed the script root.sh without any problems - but ASMCA configuration failed with the following error:
NEWS: Read: error detection of Oracle Grid Infrastructure. ASMCA needs Oracle Grid Infrastructure Configuration ASM.
Unfortunately I couldn't find much about it on the internet - I'm very stuck here...
Any ideas?
AndreaHello
There must be a variable set of environment that should not be there.
You can connect with your normal user (without the oraenv) and do a 'env' and provide your environment variables.I suppose that you have set a parameter of ORA_NLS or something similar, that should not be there.
Concerning
Sebastian -
Grid infrastructure to install 11 GR 2 - size of the invalid entry
HW/SW platform: Win 7 under a machine Virtualbox 3.2.10 with Oracle Enterprise Linux 5.5 x86_64 2 prompt guests to support the DB instance in a RAC configuration two.
Here's the question:
During the installation of 11 GR 2 grid Infrastructure of zip file downloaded on a Virtualbox (Linux) guest host, the process stops with the error ' Invalid input size (expected 729772, but has 729794 bytes).» After several attempts of difficulty (see below), I get the same error that only he throws different byts sizes if it seems to fail at different points in the process of randomly. So far that all take great - HW/SW/network all the pre-reqs without error (took a piece of work to get there!).
I scoured Metalink, Google docs. Google shows a large number of cases where this sort of thing happened with different configs but no coherent solution is presented, nor caused already discussed. Based on my results, I tried several things but am now at a total loss for what to do. Here's what I spent the last two days, in order to work around the problem:
-a confirmed the value cksum and bytes are correct before decompression.
-installed and used a different download manager and pulled down a new copy of the file zip both my PC and directly on the Linux (PCS used in binary mode when copying the files in Win7 for Linux).
-downloaded a third party utility zip to try.
-reran the installation of many times (cleaned of all directories before each series)
-created a symbolic link to point to the utility unzip in/usr/bin rather than Oracle provides with the software in case that was the problem.
Anyone can shed light on this issue? This could be the cause of this rpoblem? Maybe someone has had experience of this type of fixing problem and can share what's the root casue.
Here's what's installation log file (the last lines). It indicates the prcoess stopped at the first command of fastcopy...:
INFO: Definition of variable 'ROOTSH_LOCATION' ' / u01/app/11.2.0/grid/root.sh'. The value from a block of code.
INFO: Definition of variable 'ROOTSH_LOCATION' ' / u01/app/11.2.0/grid/root.sh'. The value from a block of code.
INFO: preCopyScript running
INFO: /tmp/OraInstall2010-11-25_11-28-26PM/mvstubs.sh
INFO: InstallProgressMonitor: from phase 2
INFO: Current Installation
INFO: Current Installation
INFO: Extraction of the files in ' / u01/app/11.2.0/grid'.
INFO: Extraction of the files in ' / u01/app/11.2.0/grid'.
INFO: Performing fastcopy operations based on the information contained in the file "oracle.crs_Complete_exp_1.xml".
Here's what's in the error log:
-# Begin Stacktrace # -.
* ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:7566
oracle.install.commons.base.driver.common.SetupDriverException: size of the invalid input (expected 729772, but has 729794 bytes) *.
at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:467)
at oracle.install.driver.oui.SetupJob.call(SetupJob.java:166)
at oracle.install.driver.oui.SetupJob.call(SetupJob.java:47)
to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:650)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
* Caused by: oracle.sysman.oii.oiic.OiicInstallAPIException: invalid entry size (expected 729772, but has 729794 bytes) *.
at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:1016)
at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:936)
at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:456)
... 7 more
-# End Stacktrace # -.
I really need to make this work and suspect that maybe it's a bug, but I think that anyone he said now. Any help is greatly appreciated. I will update the post tomorrow when I get a new copy of the download to another point of network access, but where this is not the problem I wanted to get this thing connected now to save time in case someone might know what is happening.
Thank you very much in advance...
Tony G.to all,
Unfortunately, I have the same problems with "Invalid size entered" during the installation of Oracle GI V11.2.0.2 (downloaded from Oracle Support!) and Oracle GI V11.2.0.1 (download delivery).
MD5 and sha1 after copy with scp in the guest OS aro OK license!
I use Virtualbox 3.2.12 and my host platform is windows 7 (64-bit) with 2 guest with Oracle Linux 5.5 systems.any idea,
Michael
-
11 GR 2 cannout launch Installer OEL 5.5 grid Infrastructure
Hello
I am trying to install the grid Infrastructure 11 g R2 in my 5.5 OEL in Oracle VM (with Virtual Guest Additions).
I have install all the disks in the ASM which is verified using the oracleasm listdisks.
I have the connection as root. I have to open a terminal
If I echo $DISPLAY$ su - oracle $ entering password here.... $ cd Desktop/grid/ $ ./runInstaller then.... I got this error Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
It shows only {noformat}: 0,0 {noformat}
any help is appreciated
Thank youSalvation;
If you can work screen of gnome that follow below
as root
xhost +.You should see:
disabled access control, customers can connect from any hostSu - oracle
xhost +.You should see:
disabled access control, customers can connect from any hostCD xx (your installation path)
. / runInstallerPS: If you have problems please send me an email which is available on my profile
Respect of
HELIOS -
ASMCA needs Oracle Grid Infrastructure Configuration ASM
Hello
I try to install DSO 11 GR 2 on RHEL5. I use VMWare Workstation.
I have already installed Oracle database and software infrastructure of grid on this machine. During the installation of network infrastructure, I chose only the software grid Infrastructure.
Once this succeeded, I'm trying to create instance ASM using the asmca.
About the discs, I use raw devices. I created a virtual disk that I have partitioned but have not formatted. Did this to create the raw device
[root@localhost sysconfig] # / bin / / dev/raw/raw1 gross/dev/sdb
/ dev/RAW/raw1: linked main 8, minor of 16
and added
ACTION == "add", KERNEL == "PSD", RUN += "/ bin/raw/dev/raw/raw1 %N".
at /etc/udev/rules.d/60-raw.rules
Then I tried to create the disc, but it failed. So I did the following steps to resolve this
[software root@dhcppc2] # /etc/init.d/oracleasm createdisk VOL1/dev/sdb
Disc marking 'VOL1' as an ASM drive: [FAILURE]
[oracle@oracle11gR2 grid] $ tail-f/var/log/oracleasm
Device "/ dev/sdb" is not a partition
To solve this problem
[root@localhost ~] # / usr/sbin/asmtool - C-l/dev/oracleasm - s/dev/sdb VOL1 n - force = yes
asmtool: device "/ dev/sdb" is not a partition
asmtool: continue anyway
I am now able to view the asmdisk to the listdisks option.
Have defined following environment variables before you run the asmca
[oracle@oracle11gR2 ~] $ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/Grid
[oracle@oracle11gR2 ~] $ export PATH=/u01/app/oracle/product/11.2.0/Grid/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
When I run ASMCA I am facing this error - Oralce grid infrastructure is not configured correctly. ASMCA needs Oracle Grid Infrastructure Configuration ASM
Any thoughts?If it is not clear what you are doing and how, or two things.
(1) if I remember correctly, the raw device support is he more RHEL5, OEL5 and 11.2 oracle db. You must use block devices, set up with the ASMLIb to use for ASM.(2) did the ASMCA successfully configured when you installed the grid Infrastructure?
I have a very strong hunch that your installation is not correct. I suggest that clear you all, then reboot.
HTH
Aman... -
root.sh failure in ORACLE GRID INFRASTRUCTURE 11.2
Can anyone help identify the problem that I run the root.sh installation & configuration ORACLE GRID INFRASTRUCTURE for a node 2 (rhel5) 11.2.
I got the following in node 1 error message:
===================================================
PROT-1: failed to initialize ocrconfig
Return code of 255 (65280) of control: / u01/app/grid_home/bin/ocrconfig-upgrading to oracle dba
Cannot create the Oracle Cluster registry configuration, rc 255
CRS-2500: Can not stop resource 'ora.crsd' as it is not executed
CRS-4000: Stop command failed, or completed with errors.
Return code of 1 (256) of control: / u01/app/grid_home/bin/crsctl stop resource ora.crsd - init
Stop resource ' ora.crsd - init ' failed
Cannot stop CRSD
===================================================
I use EMC storage for the cluster.
I checked all permissions and they are fine, 'root' has access to all folders 'oracle' and vice versa. all the clatter of SSH works as well.
Kind regards
LilyYou can post your OCRCONFIG errors? It's under $GRID_HOME/log /
/client/ocrconfig*.log
Maybe you are looking for
-
My iPad air2 will not charge after the software update
My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?
-
How can I eliminate all the routing information when you print an e-mail message?
When you print an e-mail message entering, Thunderbird includes an entire page, or more than all the routing information related to the email. All I need is the content of the e-mail message, the indication of an attachment, and who it is from. There
-
Bug of Linksys WRT54GC Mode of operation of "router"?
I use a Linksys WRT54GC router and I experience a behavior that I don't expect.You give me your opinion?This is the case: My assumption of "Gateway" or "Router" operating Mode is:Gateway mode means NAT that makes invisible LAN subnet side WAN address
-
Hi guys I have a HP Pavillion DV6 that came with windows 7 installed, I bought and installed windows 8 pro, but now I want to go back to windows 7 anyone knows how can I uninstall windows 8 and reinstall windows 7 please Thank you
-
Windows 7 in 'Récent' has customdestinations the files of ms which does not open
Windows 7 in 'Récent' has customdestinations the files of ms which does not open. Does anyone know if Microsoft has a solution showing how to open them or any other solution? Thank you! [Original title: GeorgiaFH]