Problem of helmet.

Similar Questions

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• Problem of helmet T400s: one female connector for microphone and headphones

  Hello

  would need information about the headphone jack on the left side of the laptop. Whereas, in my old X60s have been two connectors for Microphone and stereo headphones (separately), now in the T400s remains only one connector, combining these two functions. As I like to keep my helmet: what type of connector / adapter should be used? Is the new jack mono or stereo?

  Who can help me?

  Kind regards

  Lutz

  Hi the masts (and all others).

  problem solved here: I bought a Belkin adapter in 'Y' photo here

  Works very well with a mono headset (1 x MIC) and 1 x headset, both with stereo jack.

  The microphone uses the top of the connector, the headset uses the second port. Perfect.

  Have fun

  ineltron GmbH

  __________________________

  If you need the power semiconductor: www.ineltron.de

• Equium A210 - problems with helmet

  I hope someone can help!

  My headset does not work on my laptop, when I plug it into the sound keeps coming through the speakers.

  At first, I thought that the helmet was defective, but am now, of course, is not the case. When I go into control panel > hardware and audio > sound I can see the speakers in the Panel of reading, and then when I plug in my headphones, they appear in this Panel also but have no sound.
  When I go into the properties of headphones, I see that 'use of the device' is marked as "use this device (enabled). I looked at the other settings and they look the same all good for me, and when I go to the Advanced tab and click the test button, the sound here comes through the headphones (everything still comes through the speakers).

  I tried to update the drivers, but it says I have the latest version. FYI I am running Windows Vista Home Premium. Help

  Hello

  In the control panel Realtek HD audio Manager you will find two analog ports for microphone and headphones.
  Click right on the helmet and you'll find a parameters that would be turn on or off the speakers, while the headphones are connected.

• Problem of helmet of blackBerry Smartphones

  So I bought the new htc hd2 and gave the woman my 8900. I did a factory reset and it gave to her as I had the phone originally. For some reason any headset is strange. I used to make calls on all the time with them, and NEVER once did I hit activate the headset. Now you cannot use them without it. Just thought I'd see if anyone else has had this problem. Ive scoured internet and it seems that his need to hit activate the headset, but I've had this phone since May 2009 and have never had to. Indeed, when a call came, I just hit the button on the headset and it should answer the phone any more. Any help would be appreciated. Thank you.

  No, not bluetooth. I thought about it. The small piece of copper inside the plug did not a good connection. I ended up using a very small screwdriver to lift and make better contact with the plug. Still cannot explain why it won't work if you click on activate the headset, but after adjustment, everything worked as it used to. Go figure.

• Z560 - problem of helmet (helmet + laptop)

  I have a Ubuntu 10.04 installed on my laptop.

  When I connect headset I hear the sound at the same time the headphone speakers and speakers of the laptop.

  When you plug a headphone the sound from the top of the laptop must be turned off.

  Anyone know how to fix this?

  I managed to solve this isue.

  1. update the ALSA driver:

  Reach:

  http://www.Linuxant.com/ALSA-driver/

  Choose the pakage of debian:

  http://www.Linuxant.com/ALSA-driver/archive/ALSA-driver-Linuxant-1.0.23.1/ALSA-driver-linuxant_1.0.2...

  2. Add the following line to /etc/modprobe.d/alsa-base.conf and reboot:
  model options snd-hda-intel = thinkpad

• Help please! Its Dell Inspiron 1525 - low when you look at DVDs and problems of helmet.

  When I play a DVD, the sound seems very low, even if she goes up to 50 in media center and goes up to 100 on the system. Also, when I plug headphones into one of the two slots head phone installed in the computer laptop, sometimes sound crashes completely on my laptop and a red line is put through the symbol of sound.

  When I use the headset the sound is really strong, as well as when I listen to a song on itunes, the sound is much stronger than that of the quality of his DVD.

  Anyone know what I can do to make the sound louder? I tried to change the sound on the two media center settings and the settings of the sound systems.

  Would really appreciate help. Thank you.

  
  

• HP Envy Phoenix h9 headset problem

  When I plug my headphones, no sound comes out of it, but rather the speaker produces sound. I realized that my mic jack works and when I plug it into the headphone jack of the headset, the computer says that there is no wired headset. It's very frustrating because when I do a session of disorder on audio playback, it is said:

  The device doesn't seem to be connected. Check the connection. Go to the next step at the end.

  I chose the option: speakers/headphones - IDT HIgh Definition Audio CODEC

  I plug the jack is at the front of the computer, on the top where there is the headphone, microphone and usb 2 places to put them in. My helmet do not appear when I go into Control Panel, hardware and sound, sound. The device: speakers/headphones show that it is not plugged. I have a feeling that the headphone jack somehow uncomfortable. He worked even more early until I turned off the computer (I got micro usb and headphones jack of the headset before stop). After a while, I turned on my computer and realized that there is the problem of helmet. I tried to use the headphones on another computer, and it worked. I tried to use other headphones on the HP ENVY, but it did not work.

  Hi micky170922,

  I understand that you have a problem with the headphone jack. I would like to help you with this, but I have a few details first.

  What is the number of full model of your desktop?

  How can I find my model number or product number?

  What version of Windows are you using currently?

  Operating system Windows am I running?

  Thank you.

• Headphone issues and options grayed out reading preferences

  The basic problem is that when I play music via iTunes, if I plug my headphones, it covers only playback through the computer speakers, not headphones.
  If I closed iTunes, plug in the earphones, THEN restart iTunes and play music, it will come through the headphones, but if I unplug, it is paused and not restart, even if I plug the headphones insert it again.
  Although I can change speakers headphones by stopping iTunes and restarting, I'm often trailing long playlists, it is not practical to do so.
  Other advice, it seems that I have to change the "audio playback" setting using "Session of Windows Audio' 'Direct Sound', or something similar, HOWEVER, when I go in Edition > Preferences > reading, the box is grayed out, and I can't change it.

  Any advice on how I can do so I can change the option, or any other fixes for the problem of helmet? Thank you very much

  (Running for laptop HP with Windows 8.1, iTunes 12.5.1.21,

  Installed new hard drive and reloaded the operating system on June 16, i.e. when the headset/speaker turn is more, before, and then it worked fine.)

  Have you found a solution? I've just updated to iTunes 12.5.1.21 and I have the same question, ' Edit > Preferences > reading > play Audio using the "gray

  Direct Sound is the vastly superior choice if you have several outputs such as speakers and headphones and now if have to stop iTunes whenever I output to the speaker.

  Apple bring back this feature.

• Re: Yoga 2 issue of pro sound

  Hi Amy. We have a Yoga 2 Pro with the problem of helmet. It is a second computer so that we can live without it for a time to the cause. The sound only plays through the headphones, when get out us them, nothing. We used a Bluetooth speaker as a work-around.

  Let me know if you still need one. We're in SoCal.

  Best,
  Husband

  EDIT 10/31: email address removed to avoid harm. Amy_Lenovo
  11/4 EDIT: moved the message to use for climbing. Amy_Lenovo

  
  

• Incompatible audio when you use headphones on Pavilion DV7

  Hi, I got a new replacement laptop (Pavilion dv7-7008tx with Windows 7 Home Premium 64-bit) HP last Friday, June 8 and immediately noticed that playing media with headphones connected files, audio is silent in places and then builds up in others. When I replay certain parts repeatedly, it's always quiet and noisy in the same places. Without headphones, audio is fine.
  
  I tried to uninstall the audio device and restart the computer could install the latest driver once rebooted, but the problem remains.

  I tried to look for a solution on Google, and people made the assumption that it has to do with the parameters of development (although most of the time it has not solved the problem in any case), but the deirections they let you access these settings do not apply to this laptop, and I can't find any place to change the development settings.

  Hello

  Reset the default settings of the bios as follows.

  NOTE:  In the Bios Menu, note the current Version of the Bios

  Shut down the laptop.  Tap here to f10 as soon as you start Notepad to open the menu of the bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, go through the process below to install the original auido software.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56155.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, if you do, check the box allow this and then proceed with the uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  Check if the problem of helmet is still apparent and let me know.

  Also, let me know the current Version of the Bios.

  Kind regards

  DP - K

• Another key feature missing? Phone application remembers that output to use.

  Everyone knows this? I'll have a fine conversation by using my bluetooth headset, hang up and close the phone app. Later, I receive a call, but when I pick up, it is not routed to my helmet! I have to click on the phone application and tell it to go to my helmet. It is a real disappointment. I think it's the same thing for audio phone pumped to the 3.5 mm jack; It'll work a call automatically (say, when you use pandora in the car) and then the next call will be routed to the handset, causing a bad start a conversation uncomfortable.

  Just told me that it is a characteristic and that it is caused by answering the call by touching the screen of the phone.

  This solved my problem of helmet, but not my problem w / pick up the call through the 3.5 mm jack socket. I need an audio cable with a response to pock the call button up there?

  Thank you.

• No noise from XPS L502X

  The sound of my laptop no longer works and I don't know why. I looked through many settings that I could and cannot diagnose the problem. Helmet shots work perfectly well and reading devices show that his plays, but nothing doesn't come out. Any suggestions?

  rjacinto

  Also I went in for my audio drivers Device Manager, I have uninstalled them and then restarted. Who re - installed, correct?

  Yes. If you do this and do not check the box "delete the driver software", then when you restart the Realtek audio driver is rebuilt the existing files on the hard drive with the restored default driver configuration. If you do not check the box, then the Realtek files are deleted, then when you restart Windows installs its own native audio driver (called "High definition Audio Device" in Device Manager).

  Another way to reinstall the Realtek driver is to download and install the version of the XPS L502x download page. If you do, remember to select your operating system from the menu drop down. Doing it this way Gets a new copy of the file, which is good in cases where the driver corruption is suspected, or when a driver needs to be updated.

  rjacinto

  Based on this information you think it could be faulty sensor circuit?

  Here are the symptoms of a missed sense pin:

  * Speakers do not work and are not active or deselected
  * Headphone Jack works
  * Reinstall audio driver does not help
  * Audio test Dell Diagnostics passes
  * On models with 2 headphone jacks, you can be "verified" in the dashboard as if in use
  * Sometimes, but not always, a very gentle agitation to a plug in the plug will get to resume normal operation, at least temporarily.

  If you have these symptoms then it is pretty certain that you have the PIN direction failed. There is no direct test for her. The 'test of Audio in the Dell Diagnostics passes' symptom means you should hear sounds or music during audio tests, you did.

  rjacinto

  I passed all the tests in the category except for "headphones 1 (HP1) reading test" and "helmet 2 (HP2) reading test.»

  I don't know how to interpret it. You have not heard audio with headphones during the tests, but you do when you're back in Windows?

  rjacinto

  is anyway for me to fix this?

  The way to fix is to replace the Jack, but making your model is integrated into the motherboard, making it difficult to do. If this had happened when your warranty is still in effect, Dell would have replaced the mother Board together. If you are interested in working within your laptop, you can get the repair of the XPS L502x documents page. If you get the manual then download in Adobe Reader to see this is good.

  I have the list of the possible workarounds in the FAQ of Jack for headphones. Down in section 5 it and try the last workaround - one for the Realtek audio. It was something that I fell on the internet and I don't know if it works or not.

• Wireless headset won't connect

  I am using the logitech wireless headset H800 with my hp laptop Pavilion g4

  My product number: serial number of LW338UA #ABA: [redacted]

  I have connected the logitech receiver to a USB port, but the helmet does not connect.

  Also, I'm still not able to get bluetooth connectivity is

  Thanks to all who can help... I'm new on this forum and not an advanced user. I do not know if this laptop compatible bluetooth (blue light on f12 button lights up)

  Hi Ram38,

  Here is a document for the no sound on speakers (Windows 7) that may solve your problem of helmet. It gives control with a USB connection, you would look just for the headphones instead of speakers.

  I have my fingers crossed.

  Good luck

• Is it me or is Workstation 7.1.5 a step backward?

  I absolutely love VMware Workstation. The only problem I regularly is that VMs freeze often, and I have to disconnect and reconnect my headset wireless Plantronics (USB 2.0) in the order of the Nations United-freeze the virtual machine and bring it back to life.

  I have considered upgrading to Workstation 8, but the advice I got in another thread here was that these problems are actually worse in 8 work stations. Needless to say, I was delighted to see the output of 7.1.5 which is advertised as "solve problems with USB 2.0 devices. But after using it for a few weeks, I find that the problems are much worse, not better.

  Is it just me or other users find 7.1.5 to be worse than 7.1 regarding USB gel VMs devices? Does anyone know any solutions or solutions to this? It is a real pain...

  Thank you

  xPat

  No problem; My helmet is ranked 4th poster in this thread:

  http://communities.VMware.com/message/1732451#1732451

  Good luck with it.