Wireless headset won't connect

Similar Questions

• Pavilion 14-ab167us: NO wireless printer won't connect

  I bought 3 of these laptops and there's only one problem, I had my boss on the line of work and printing... While she was off site, I installed a new router for our internet. When she returned, I set him up on the network, none of its printers would work... then I uninstalled & reinstalled tried them (wireless, IPAdd etc.)... None of our printers appear on the network wireless, but do it for other laptops... I hard wired his cell phone in, still no printers with see the place... I manually installed the printer with Windows and drivers, print a page of test very well, but no application will not print printer, I tried to install with the software... He found the printer but we get an error... no test page, the printer will print its laptop... what setting got messed up or turnned off... WiFi is on, Airplance is off.

  Hi @nancmadi,

  I'd be happy to do my best to help you with your printer problem. What model of printer you have?  How can I find my model number or product number?

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• HP 7510 AIO printer won't connect - Wired workstation, printer wireless

  Hello!  I'm talking about (and verified solution button) too early. The printer still "disappears" from the wired network XP workstation. The only difference as apply the given solution is that disconnect it now happening about every 12 hours, against every two hours.

  Ink notification has the value "only when I print.

  Static IP address is defined for all machines

  HNDU works - when the printer is visible, but hangs at the workstation if the printer is not visible.

  Follow the original comments below;

  Printer wireless HP 7510 goes - 4 station XP wireless network, w / 1 connected PC.

  I think it's fixed now... the problem seems to lie in the module that will inform you immediately if the ink is low (vs only notify me when printing).  If, during the initial installation, the user selects 'immediately', then the printer will disappear randomly. (More on "re-find" later.)

  In addition, it is difficult to change the notification of ink setting, because it doesn't seem to be 'sticky', but will sometimes flip. (I don't understand this yet).  As long as the 'notification of low ink' setting is on "only when printing", life is good.

  If the printer does not disappear, go to the Advanced tab when the printer software/firmware page, instead of the current ink level.  Reset the selection on "tell me the notification of ink" to "only when printing" and then toggle the "autoshut off' from 'NEVER' to '2 hours' and then, finally, a return to '' NEVER. ''  Then, finally, press closed on the Panel.  Printer must be connected again. To test, returned to the Photosmart 7510 app and select "Show estimated ink levels".  The meter will start at 1%, to 41% and then bounce around until it displays the ink level.

  FOR HP TECH: Please consider the "ink level notification" persisted to the registry OR to provide an of-install tool that will completely clean any prior installation of 7510 driver / app in the registry, to install a new can have this setting properly recorded.

  Hope this helps some of you: it's a great printer after its running!

  Jim

• Need help to connect to the wireless headset

  Hi you guys, I have a 610xt Touchsmart, I just bought wireless beats headphones, I plugged the headset to my PC via bluetooth, so far when I played a song from my PC I can hear the sound is coming from my PC not my wireless headset, can someone help me how to do when I play the songs I hear from my helmet

  Thank you

  Teddy, you should go to control panel / sounds and check to make sure that the audio device is set as default.  It should be the bluetooth headset.

  If your problem is solved, please click "accept as a Solution.

• Toshiba TV/DVD combo 32SLV411U - listening to the wireless headset?

  I hope I am posting this in the right place. I couldn't find a specific board just for TVs?

  I recently bought a Toshiba TV/DVD combo 32SLV411U. I really like but have a problem.
  The best way to go about that I guess is to tell you what I hope to be able to do.

  I will say first of all, I called Toshiba tech support and they said it couldn't be done and advised that I buy a sound bar.
  I'm not 100% convinced they have well understood or that a sound bar would solve the problem.

  The tv model I does not appear to have a separate headphone jack. I was obviously the rear connections for rca type cables.

  While watching a DVD (not connected decoder, in DVD mode) I want to be able to have the silent TV.
  I live in an apartment complex and do not want to disturb the neighbors. I want the audio from the forthcoming DVD the only wireless headset. This does not work when the TV is connected to cable as the sound comes through the cable box.

  It seems to me that I should just be able to fix the audio cable rca to the back of the TV and listen as I've described above. But I can't make it work any configuration, I tried. I don't know if I just need to configure things differently or what. When I go to the menu and look at the options, it doesn't give me a lot of choices in this area, unless I'm looking in the wrong place.

  Is this possible without buy me something more? If so, how we configure it to do it properly when you watch a DVD?

  If I do not need to buy anything, how a Soundbar works and it would solve the problem?
  Or should I look for a standalone DVD player with audio connections on the back (a little beats the purpose of)
  have a TV/DVD combo, but could be a less expensive option.

  I guess I should have taken a second look at the features before you buy the combo TV. I just assumed that, with the connections audio to the rear, it would work. I had no problem with the previous TV/DVD combo I've owned, but it doesn't have a headphone port. In the meantime, I watch DVDs on my PC.

  Any information or advice is really appreciated. Thanks in advance.

  > I hope I am posting this in the right place. I couldn't find a specific board just for TVs?
  You can't find a good advice, because it is a user to user Toshiba forum computer systems.

  But maybe I can help you:
  > Watching a DVD (not connected decoder, in DVD mode) I want to be able to have the silent TV.

  I live in an apartment complex and do not want to disturb the neighbors. I want the audio from the forthcoming DVD the only wireless headset. This does not work when the TV is connected to cable as the sound comes through the cable box.

  In my case, I connected my stereo directly on the DVD player using RCA (red/white cinch) cables.
  In addition, the DVD player is connected to the TV via HDMI.

  I can turn off the sound on the TV and can listen to the sound from the stereo speakers.
  If you want to use headphones, then connect it to the stereo and it should help you :)

• WLL Logitech F540 wireless headset runs on windows xp and windows 7?

  on windows xp or 7 wireless headset work?

  What do need me for my pv?

  Thanks, rich

  Hi rich in P,

  The Logitech F540 Wireless Headset is compatible with Windows 7. For more information, please see the link.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Logitech%20F540%20Wireless%20Headset%20&OS=64-bit

  Whereas information about Logitech F540 Wireless Headset with Windows XP are not known. You can also check out the link to the Web from Logitech site and see the system requirements for this device.

  http://www.Logitech.com/gaming/headsets/devices/7362 (check specifications)

  You can visit the article to connect the headphones to the computer and check.

  Using your headset F540 with a PC wireless

  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/20457/kW//session/L3NpZC9Cc1FXZGlEaw%3D%3D

  Hope this information helps.

• wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone

  original title: wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone

  I have a wireless HP printer. Desktop and lap top are connected to the printer. Desktop will switch printer on photo-quality paper when asked but laptop will not pass. Tried to change prefereces and still does not work. In the contrary case, it prints fine laptop.

  Hello

  Install the latest printer drivers in the notebook, and the check.

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Also try the troubleshooting of network running.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  It will be useful.

• PDP Afterglow Wireless headset, disconnect

  Hi, my problem is that my USB transmitter disconnects from my computer when I turn on the headset and it connects to the transmitter. While the headset is off in my sound devices it shows a headphone Afterglow is connected and when I turn on the actual headset, she vanishes. I tried to uninstall and install the drivers and using 4 different USB ports and 3 different USB 3.0 ports, but in vain. The head is set well for my Ps3 and Xbox 360. If I connect it manually using the plug to headphones, I can get the sound to play, but that defeats the purpose of having a wireless headset, also doing it this way only allows me to use the microphone. Any help would be appreciated as I tried for weeks so he could work.

  Hello Brandon,.

  Thanks for posting your query in Microsoft Community.

  1. You did changes to the computer before the show?
  2. The problem is specific to a wireless earpiece? Have you tried to plug any other
     wireless device?
  3. What exactly are you to pass, when you say "my USB transmitter disconnects.
     my computer when I turn on the headset and it connects to the
     Transmitter?

  I suggest you run this Microsoft fixit and verify.

  Reference:
  Hardware devices do not work or are not detected in
  Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  What should I do if my headset is not paired his device?
  http://support.PDP.com/ICS/support/default.asp?deptID=5553

   

  If you still have questions, contact support for PDP Afterglow

   

  Contact us

  http://support.PDP.com/ICS/support/default.asp?deptID=5553&redirect=true
  Please return with the required information so that we can help you further.
   

• Logitech Wireless Headset H800 does not

  Original title: Logitech Wireless Headset H800

  I have all the signals on the helmet (light Amber to connect to the computer and the green light for light), but not yet by train

  all the sounds. I have configured and says working properly. When I do a search in the computer (Windows 7) is not displayed. In the playback area

  It shows Logitech wireless by default. Have you tried another USB port, stll same problem

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  You can follow these steps and check if it works:

  a. click Start and select Control Panel-> his-> in the tab 'read' select 'Properties' for your device. (helmet)

  b. then you will be on a tab "properties of speaker.  Select 'levels this option will allow you to change the balance.

  You can also see the following articles for more information:

  Adjust the sound level on your computer

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

   

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• My mouse wireless guard saying lost connection.  I thought that it may need a new Bluetooth card.  An idea of the cost if I do it?

  My mouse wireless guard saying "lost connection".  It takes time for it to reconnect.  Wireless keyboard is OK.  Apple store said that it may need a new Bluetooth "card."  Any idea the cost if necessary.   I tried a new mouse, with the same results.  Having to use a "wired" mouse now taking a much-needed port on my iMac.

  I return to the store and get a better answer. Material, of course, could be the problem. As far as I know, there is no such 'map '.

  Reset the PRAM and SMC... can't hurt, might help.

  Barry

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning