Problem of latency using MS GS Wavetable Synth

Similar Questions

• HOW DO DISABLE YOU MS GS WAVETABLE SYNTH IN WINDOWS XP PRO

  It seems that nobody in the web universe knows the answer to this question, but if someone DOES not know how to disable MS GS Wavetable Synth in Windows XP (NOT 7 or Vista), please do not hesitate to share.  Problem is that you cannot use ASIO4ALL while MS GS Wavetable Synth is activated or the rest of the default value.  You cannot change or disable clicking on through the sound icon on the screen, or through Control Panel of configuration/sounds, or by turning off the speakers in the BIOS.  I read a suggestion that a new sound card may be the answer, but I seriously doubt that could solve the problem, because the way the problem is inherent and exclusive to no hardware and Microsoft's software.   Someone at - it the answer?

  Uh, you're confused here. The GS Wavetable is a terrible software with an alarming problem of latency to read Midi, audio files not. It belongs to all windows, no only XP so you can't get rid of it. You simply do not use it as a default device, but only if you have other software installed Midi playback.

  Asio4All is a 'wrapper' that emulates the concept of Asio for audio files and is NOT used for playback of Midi files.

  As you do not specify which audio device or software (to play your Midi files) that you use, it's difficult to go further.

  However, if you buy a Sound Blaster, for example, it comes with its own Midi drivers that once installed can be selected as default instead of GS Wavetable Midi device (and you will get the best latency as well!)

  If you buy one map for use with a DAW professional sound, then it will also have its own midi drivers and also the DAW will have its own soft synths to play Midi files.

  Soon, if you need any other Cree just Info!

  Jerry

• 64-bit Alternative to Microsoft GS Wavetable Synth MIDI generator?

  I am trying to find an alternative to the MIDI synthesizer driver built-in to Windows 7 64 - bit - namely the MS GS Wavetable Synth.

  I have a card Creative X - Fi (64-bit drivers of course), but for my misfortune, I discovered that the MIDI synthesizer nice Creative supports 32 bit systems only.

  I do a lot of work with MIDI files and am extremely disappointed with the Microsoft synthesizer - sounds that the instruments have not been updated since Win 3.11, which is probably true. I'll try to find an alternative better sound quality that is compatible with a 64-bit operating system, but hours of research have resulted in nothing useful.

  Does anyone have recommendations?

  I don't know if you still need help (your post is very old) but I'm having the same problem with my SB X - FI HD card. I looked up and I looked down and, unfortunately, I don't think that there is no solution to this. What I do is I use this card for my music, games, movies, etc, but for lunch, I have an old Pentium III computer with a soundcard ISA SoundBlaster AWE64gold. It is a much older card and is not too good with games and media, but he made a synthesizer better than the SB X - FI HD. You can buy this card on ebay like $7.00 is really cheap. I know it does not really help at all, but it is a very good synth, and I highly recommend you try!

• Unable to MIDI playback. Microsoft GS Wavetable Synth lacking audio devices

  I had posted a question on this subject about a month ago, but it is still not resolved.

  End of last year, my system crashed and I used a complete system recovery for my gateway MT6919 laptop to make it work properly again. Since that time, there is no recognition of MIDI files. Windows Media Player, or programs such as Guitar Pro 5 are capable of playing back MIDI information. In Windows Media Player, a calendar appears, but no sound is played. In Guitar Pro, it gives an error message. All of the standard digital audio files play back well, so I don't think it's a hardware problem.

  I have the latest Service pack, all updates automatic, and all pilots are also well underway (confirmed by the website of the bridge).

  In addition, this link has not helped:

  You may experience problems when you use the Microsoft GS Wavetable Synthesizer on a Windows Vista-based computer

  http://support.Microsoft.com/kb/936136/en-us

  Again, I use:

  Gateway MT6919 notebook

  Windows Vista 32-bit Ed. home

  I appreciate all in Help and support. Creating and reading files MIDI is one of the main things that I had used this laptop for before this problem, so I would really like that this problem is resolved.

  Yes, I tried a few times to reinstall the drivers for my computer. especially the sound card driver. You happen to know were the c:\windows\system32\drivers\swmidi.sys file must be in the system? It is possible that missing this file for some reason (?)...

  ============================================
  On my WinXP SP3 machine c:\windows\system32\drivers\swmidi.sys file is in many places.

  C:\WINDOWS\ServicePackFiles\i386\swmidi.sys

  C:\WINDOWS\system32\drivers\swmidi.sys

  C:\WINDOWS\system32\dllcache\swmidi.sys

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm having problems trying to use the

  IM Tony, I have an iPhone 6 more and since the update, I tried to use the animated messages but seems that theres also problem with the power button. The arrow leaves no other icons appear.

  Hi Indestruct1,

  I understand that you encounter some problems that can use the new screen effects and effects in the bubble Messages application. I have updated to iOS 10 as well and I love the new effects. I'll be happy to review some information for you.

  Use of the effects of message with iMessage on iPhone, iPad and iPod touch, this article stipulates that

  You need iMessage to send from the effects of the message. If you are unsure if you use iMessage or SMS/MMS texts, learn the difference. If you cannot send or receive effects of bubbles, make sure that you haven't reduce Motion activated.

  The same applies if you can't send or receive screen effects, check that reduce the Motion is turned off.

  Thank you for bringing your question in Apple Support communities. Have a great weekend.

• Unfortunately I couldn't find another option in Firefox to describe the problem. I use Windows 7. Since the Firefox update (now I use 16.0.2) when I

  Unfortunately I couldn't find another option in Firefox to describe the problem.
  I use Windows 7.
  Since the Firefox update (now I use 16.0.2) when I use the Google Translator in Firefox, I can't copy and paste into Microsoft Word.
  But when I use it in Internet Explorer, I can't use the copy paste it to Microsoft word (MS Word 2010).
  my e-mail address: [email protected]

  Hello
  Thank you very much for quick help
  It's work with the instruction of Ctrl + C.
  perditer

• Problems trying to use Ghost solution Suite 2.0 on Tecra M9

  We have recently bought a few M9s Tecras and now have a problem trying to use Ghost solution suite 2.0.

  It is necessary to install custom software every two weeks and have always used ghost solution suite 2.0 to recreate the image at a time, all our machines now the ghost starts and crashes before the session starts and then the fan goes mental...

  There are other posts that mention the use of switches in the cmd prompt, it works but only 1 machine at a time, which is of no use to us.

  How to use Ghost and image multiple machines at the same time?

  Arthur

  Hello

  It seems that you have some problems with this software, it freezes and I doubt it could be a problem with the laptop
  Why you n t come into contact with the solution of Ghost support Suite 2.0 in order to discover the question?
  In my opinion, this should be the first step to get some details why this software freezes...

  PS: since the Tecra M9 supports a SATA HDD controller you will need to include the SATA drivers to install and Windows operating system on this device, I guess that the package of the image that you created for several M9 contains the SATA driver files needed too. Check it!

• I have a problem in the use of 'DAQassistant '.

  Hello world. I am a new learner to labview and China. When I use labview 2014 and DAQassistant with advantech USB4750, it will display ´error-536805376· "¢ Euou ToErrorCluster.vi ' and 'Get a unique temporary file name.' I reinstalled times serval labview and win7, but it still has the same problem (initially, I work well., but finally it did not work sorry for my english.and happy Chinese new year to all.

  a version of this tool also have problem then try using a different version of the

• HOW DID PROBLEMAS CON MI USEFUL RED? ARE BRINGING ACTUALIZARLO Y NADA, ME DICE THAT IS INSTALLED THE MAS RECIENTE

  PROBLEMAS CON EL USEFUL RED

  CORPOS CON USEFUL MICROSOFT 6TO4
  USEFUL MICROSOFT ISATAP
  USEFUL #2 MICROSOFT ISATAP
  TEREDO TUNNELING PSEUDO-INTERFACE

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page click v (English) in the United States and set on your tongue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems faxes sent using Windows - Windows XP - Windows XP printing and fax

  I have Windows Fax properly installed under Windows XP SP3 with Aztech SoftK56 Data Fax PCI Modem (manufacturer CXT).  The modem receives incoming faxes, but does not send.  The Fax Console States that there is 'No response' to fax numbers that were entered correctly and I first rang just to check if they are indeed the fax number and if they work. This has been attempted without dialing rules, as well as the rules of composition and is still a problem.
   
  Fax numbers that I tried to send to are of the format: -.

  1 020-7833-nnnn 2.  020-07380-nnnnnn 3.  01324 - nnnnnn

   
  NB. an attempt was when the Fax Console has awarded occupied status "line".  It was too fake I think.
   
  Device Manager indicates that the Fax Modem works properly.  I agree completely with this.
   
  The Fax Modem receives incoming messages that suggest that the Modem is compatible with Windows Fax under Windows XP SP3 and I should also be able to send messages using Windows Fax.
   
  Have you the XP community and other suggestions?
   
  Problems with faxing using Windows Fax in Windows XP seems to have been a problem for a number of people.  However, there is no published statement of a solution that I can find.

  I have Windows Fax properly installed under Windows XP SP3 with Aztech SoftK56 Data Fax PCI Modem (manufacturer CXT).  The modem receives incoming faxes, but does not send.  The Fax Console States that there is 'No response' to fax numbers that were entered correctly and I first rang just to check if they are indeed the fax number and if they work. This has been attempted without dialing rules, as well as the rules of composition and is still a problem.

   

  Fax numbers that I tried to send to are of the format: -.

  1 020-7833-nnnn 2.  020-07380-nnnnnn 3.  01324 - nnnnnn

   

  NB. an attempt was when the Fax Console has awarded occupied status "line".  It was too fake I think.

   

  Device Manager indicates that the Fax Modem works properly.  I agree completely with this.

   

  The Fax Modem receives incoming messages that suggest that the Modem is compatible with Windows Fax under Windows XP SP3 and I should also be able to send messages using Windows Fax.

   

  Have you the XP community and other suggestions?

   

  Problems with faxing using Windows Fax in Windows XP seems to have been a problem for a number of people.  However, there is no published statement of a solution that I can find.

  Fax services Windows XP is not a very robust application.  The usual answer to questions such as yours is, "If the modem is not on the compatibility list hardware Windows XP, then it probably won't work with Services of Fax XP."  The problem with such a response is that the XP HCL (or whatever Microsoft changed its name to) is no longer available, and even if that were the case, you probably couldn't find one of the modems listed to sell more.

  Your phone numbers are clearly not to the United States.  In the United Kingdom perhaps?  If you are using dialing rules, so the number called and the call number must be included in the 'canonical form'http://support.microsoft.com/kb/318575/

  With the American numbers, this means that they would look like this: + 1 (202) 456-1414 (standard White House). If you call a London phone number, it could be something like this: + 44 (020) 7782-5000 (Sunday Times).

  I'm sure that you must sign, almost certainly you need parentheses and don't know the spaces and dashes. For this reason, I don't usually use dialing rules.

  When you leave the area for numbering rules uncontrolled, you must enter the phone number EXACTLY as you would if you were composing a normal phone using the line to which the modem is connected.

  Try to send a fax to your phone (mobile or not, it is not serious).  Is called ringtone? When answer you, you hear fax tones?

  Based on your answers to the above, we can (or cannot) be able to move forward in order to diagnose your problem.

• I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  Hi Shubham,

  You receive an error message when you try to use the Apps in Windows 8?

  Exactly how have you connected to the computer (Microsoft Account or Local account)?

  follow these steps to solve the app suggested you nuisance.

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 3:

  I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

   

  a. click on thegear box in the upper right corner in Internet Explorer.

  b. click onTools and then click Internet Options.

  c. click on theConnections tab, and then click LAN settings.

  d. Uncheckuse a proxy server for your LAN .

  e. clickOk.

  Hope the helps of information provided.

• Problem of conversion using imagemagick

  Hi all

  We used imagemagick to convert images to formats and sizes.

  Refunds are generated, but not size exact, as mentioned in the file 'extraRendition_definitions '.

  For example, size defined for the type of rendering "Basket" is ImageMagick_RenditionValidation_Cart = resizing "220 x 220 > ' , but the interpretation that results is produced for 220 x 90.

  I use 'RenditionValidation' rendition set to create "renditions" and is attached to the image as the primary file.

  Here is the extraRendition_definitions.hda file:

  <? had version = ' 10.1.3.3.2 (071031) "jcharset = UTF8 encoding = utf-8? >

  LocalData @Properties

  nConvertPath = / home/oracle/software/installers/nconvert/NConvert/nconvert

  ImageMagick = / usr/bin/convert

  ImageMagickIdentifyPath = / usr/bin/identify

  ImageMagick_DefaultSet_Web = resize 800 x 600

  ImageMagick_DefaultSet_Thumbnail = resize "80 x 80 >.

  ImageMagick_DefaultSet_Preview = resize "250 x 250 >.

  ImageMagick_DefaultSet_Primary = resize "250 x 250 >.

  ImageMagick_PraveenTestSet_PreviewTest = resize "80 x 80 >.

  ImageMagick_PraveenTestSet_ThumbnailTest = resize "250 x 250 >.

  ImageMagick_PraveenTestSet_WebTest = resize ' 100 x 100 > '.

  ImageMagick_RenditionValidation_PDP = resize "150 x 150 >.

  ImageMagick_RenditionValidation_PLP = resize "80 x 80 >.

  ImageMagick_RenditionValidation_Cart = resize "220 x 220 >.

  ImageMagick_RenditionValidation_Banner = resize ' 90 x 100 > '.

  ImageMagick_RenditionValidation_Summary = resize "60 x 90 >.

  ImageMagick_RenditionValidation_Confirmation = resize "360 x 1400 >.

  RenditionInfoEngine = command

  @end

  @ResultSet packedConversion

  2

  pcName

  pcDescription

  DefaultGraphicSet

  Requires the base game of default rendering

  PraveenTestSet

  To test the different sizes and formats

  CorporateImage

  Common requirements of corporate Format

  ProductCatalog

  CMYK Hi Res and evidence of Images for print

  DigitalPhoto

  Digital photos in various sizes

  WebImages

  Refunds for web applications and web images

  Print

  Refunds for pproductivity applications and put in page

  @end

  @ResultSet DefaultGraphicSet

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  Web

  < $ImageMagick$ >

  Web

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_DefaultSet_Web$ > "< $outFile$ > .jpg '.

  A 72 dpi JPEG no wider than 800 pixels and not exceeding not 600 pixels

  Vignette

  < $ImageMagick$ >

  Vignette

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_DefaultSet_Thumbnail$ > "< $outFile$ > .jpg '.

  A 72 dpi JPEG no wider or higher than 80 pixels

  Overview

  < $ImageMagick$ >

  Overview

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_DefaultSet_Preview$ > "< $outFile$ > .jpg '.

  A 72 dpi JPEG no wider or higher than 250 pixels

  @end

  @ResultSet PraveenTestSet

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  WebTest

  < $ImageMagick$ >

  WebTest

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_PraveenTestSet_WebTest$ > "< $outFile$ > .png '.

  A 72 dpi JPEG no wider than 800 pixels and not exceeding not 600 pixels

  ThumbnailTest

  < $ImageMagick$ >

  thumbnailtest

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_PraveenTestSet_ThumbnailTest$ > "< $outFile$ > .png '.

  A 72 dpi JPEG no wider or higher than 80 pixels

  PreviewTest

  < $ImageMagick$ >

  previewtest

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_PraveenTestSet_PreviewTest$ > "< $outFile$ > .png '.

  A 72 dpi JPEG no wider or higher than 250 pixels

  @end

  @ResultSet RenditionValidation

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  PDP

  < $ImageMagick$ >

  PDP

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_PDP$ > "< $outFile$ > .png '.

  PDP page image

  PLP

  < $ImageMagick$ >

  PLP

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_PLP$ > "< $outFile$ > .bmp".

  PLP page image

  Basket

  < $ImageMagick$ >

  Basket

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Cart$ > "< $outFile$ > .jpeg.

  Image to the shopping cart page

  Banner

  < $ImageMagick$ >

  Banner

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Banner$ > "< $outFile$ > .tiff.

  Banner image

  Summary

  < $ImageMagick$ >

  Summary

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Summary$ > "< $outFile$ > .gif '.

  Image for summary

  Confirmation

  < $ImageMagick$ >

  Confirmation

  < $InFilePath$ >

  "< $inFile$ >" < $ImageMagick_RenditionValidation_Confirmation$ > "< $outFile$ > .bmp".

  Image of confirmation

  @end

  @ResultSet ExtensionFormatMap

  2

  extension

  format

  jpg

  image/jpeg

  JPEG

  image/jpeg

  gif

  image/gif

  PNG

  image/png

  TIF

  image/tiff

  TIFF

  image/tiff

  @end

  @ResultSet RenditionInfoFormatMap

  2

  rifmFormat

  rifmEngineName

  TIF

  nConvert

  TIFF

  nConvert

  @end

  ========

  Am I missing something here, I need to generate refunds of exact sizes in the sense of 'RenditionValidation' as a whole.

  Thank you

  Praveen.

  This problem is corrected using the - culture, no action required.

  Thank you

  Praveen.

• Hello everyone, today I am trying to install adobe cc desktop, but I can't. What is the problem? I use firefox because I'm not with the chrome download

  Hello everyone, today I am trying to install adobe cc desktop, but I can't. What is the problem? I use firefox because I'm not with the chrome download

  Please see system requirements | Adobe Illustrator

• All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!

  All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!

  Trash this stage and re - register. It could be that new file dialog tries to assign a document profile that is damaged or is no longer present on your system. If this does not work, reset the Photoshop preferences. Press ctrl + alt + shift at the launch, confirm with the dialog box that appears if you did it correctly.

  Make sure to save all your other actions, brushes and so on first!

  Shares usually work between different versions, but if certain parameters have changed they may fail right there.

• I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?

  Hey paulc6148125,

  Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.

  Kind regards

  Nicos