Problem of local wireless network for Sat M30

Similar Questions

• Drivers of local wireless network for Satellite Pro M50

  Hello

  I inherited a Satellite Pro M50 with a corrupted hard drive. I formatted and reinstalled Windows XP Home.

  I looked for a wireless Lan driver, but the site tells me that no driver exist?

  Help and advice would be appreciated to allow me to connect to internet wirelessly.

  Thank you very much.

  Hello

  The Satellite Pro M50 is an old series laptop.
  You can find the drivers in the field of Archives; in the form of product type choose Archive.

  You can also visit this page:
  http://APS2.toshiba-tro.de/WLAN/

  I think you should the dirver Intel.

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• problem of driver installation wireless network for computer notebook dv7-6c20us

  I installed Windows 7 Professional but do not have a set of drivers for the computer.  I can't get the wireless NETWORK card driver to install.  I downloaded the drivers from the HP site and they will not properly install on the computer.  I do not know the manufacturer of the wireless hardware, so I can't go to the appropriate site.  I tried to use HP scan tool, but it will run on the computer.  Chrome, the button does not even operate.  In Internet Explorer, the scann button depresses but nothing happens.  Help!  Thank you!

  Hello:

  No wonder you had difficulties to find the wireless driver.

  According to the list of parts for your laptop, it comes with the adapter PCIe half minicards (HMC) WiFi Realtek 8188GN.

  The driver for this model of card is not on the page support and driver for your model.

  Here is the link to the driver for this card.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• My Satellite U400 is 3 local wireless networks only

  Hello.

  I have a laptop Toshiba Satellite U400 and when I search for wireless connections he finds only 3 around my house, but when my sister come and visit me often and she has also a laptop but she has a HP laptop and when she's looking for wireless network connections he found all 6 wireless some of them with strong and other with little signal low , so my question is how mine to find only 3 but its all 6? Is the HP laptop wireless more strong & better or what?

  I have the latest drivers for it and I have the correct settings.

  Why do you think that the settings are correct? Maybe the settings are correct for some certain standard WLAN? Have the two identical wireless network cards in notebooks inside?

  Sorry, but this is all a bit childish to me. I have 3 and she 6.
  I mean you have a problem to connect to your favorite router?

• Wusb54g v2 - problem with Linksys Wireless Network Monitor Software

  I have a card Linksys USB wireless (WUSB54Gv2) that is currently used with an old HP Desktop running Windows XP Service Pack 3.

  I also have a Linksys Wireless PCI Adpater (WMP54Gv4.1) that is currently used with an old Dell desktop running Windows XP.

  I have a wired and wireless home network... My broadband provider is Verizon FIOS; I use their supplied router because the coaxial cable that provides the internet connection plugs only into their wireless router, not in a modem and a router. I have an encryption key for 128-bit WEP on the side of the network wireless; It is even once managed via the Verizon FIOS router via a web browser (like most routers).

  Two other computers I own are a desk custom-made to date with a direct link to the Verizon router and a laptop from Apple. These two computers are NOT having internet connectivity problems.

  I've updated to the latest drivers for my USB adapter and the car PCI.

  ---

  Here's my problem:

  When I try to connect to the internet using the Wireless Network Monitor software provided by Linksys, computers, I can connect to the "access point", but not internet. This product only when I don't have the key WEP 128 bits in place, when security is disabled.

  If I right click on the Wireless Network Monitor icon in the taskbar and select "Use Windows XP Wireless Configuration", enter my network through windows manually information (including the WEP key), I can connect to the internet perfectly.

  However, when I restart or stop two PC, the Linksys Wireless Network Monitor reactive software itself, where it automatically attempts to connect to the internet, but fails, after which I right click on the icon of the monitor again and select «Use Windows XP...» "and then I connect to the internet.

  Is anyway to disable the Linksys continuously monitor software WITHOUT uninstalling the software or drivers? (I tried this; Windows cannot use or recognize the network adapter).

  ---

  I might just re - activate the Setup Wireless Windows XP every time I close / restart, but other users of PCs on my network (my family) are exceptionally illiterate computer/network and would not be able to learn how to do whenever they want to connect. There is very little practice.

  If there is a way to solve this situation, please help! If all goes well there are other solutions I am open to suggestions.

  I must emphasize that our Apple laptop connects fine when the WEP key is set.

  Once more, looking for quick help!

  Thank you advance!

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click Finish.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• Intermittent connection problems Atheros AR5BWB225 Wireless Network Adapter.

  Original titile: constantly restteing my Atheros AR5BWB225 wireless network card

  Hello, I just got a new computer, it is an Acer Aspire S3.  I have problems with stay connected to my network and having to reset the network adapter from one or two times a day at intervals of a few minutes.  There are two other laptops (HP and Toshiba) in my environment as more well-connected smartphones and ipad, but my computer is the only one having connectivity problems.  Any idea will help you.

  Hello

  1. have you updated any drivers, including drivers for network card?

  I suggest you perform the steps in the below link:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  http://support.Microsoft.com/kb/928152

  Also, check out the following links for more information:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

• Problem comments RV110W wireless network access

  Hi all!

  I am facing a problem that was not represent earlier, and I can't solve this...

  We have a small business running an apartment as a business next door. To provide access for guests - separated from the SME network, that we have created a wireless network of comments on our CISCO RV110W router which worked well for months. But for more 2 weeks now on the network of comments simply do not accept the password set in the router management console - I tried to change it, but without any proogress, also restarted the router several times - no effect...

  Anyone have a suggestion, what happens?

  Details:

  Updated firmware to update to the most recent available on CISCO's Web site. (1.2.0.10)

  Screencapture of the basic Panel Wireless of the management console:

  

  ( http://i40.tinypic.com/2lm6x53.png )

  Screencapture of the parameters of the management console Net comments:

  

  ( http://i41.tinypic.com/2lxilbc.png )

  Password complexity checking is disabled, it cannot be the root of the problem.

  And the error message we receive when you try to access internet from comments:

  

  ( http://i40.tinypic.com/ek21kx.png )

  I don't know what to do, but hit my head against the wall...

  Thanks in advance for your help.

  Hi Pal, another thought perhaps to factory default from the router then see how it behaves. I see no reason why it work for so long, and then stops working unless perhaps something is damaged in the software.

  Were there any configuration changes from when it works and now does not work? Add or remove of anything?

  You can try to factory reset the router and see if it works then?

  -Tom
  Please mark replied messages useful

• Unable to connect to a wireless network for machine under windows 7.

  I have a Lenovo Ideapad U450p with Intel Centrino 2 chipset.

  The wireless card is Intel(r) WiFi Link 5100 AGN

  Completely updated the driver (in order to solve the problem)

  For some reason I can't connect to any wireless network. I don't think it's a problem of router, the router can connect to other devices (there is no MAC filtering). I also tried to connect to the hotspot from my phone.

  I can see all available wireless networks, so I think that the scanning function does not work correctly. I just can't connect to one of the networks. I tried to change the password wireless, even tried to disable wireless security.

  Thanks in advance!

  Hello

  Method 1:
  Check out the link and follow the steps.
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
  Method 2:
  You can also visit this link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 3:
  Check out the link and follow the steps in section allows you to configure a wireless connection.
  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• What wireless network for Time Capsule backups?

  Just installed a new Capsule of time at home. The time Capsule is a wireless router, and I can connect all my devices wirelessly to the Network Time capsule wireless. I still 2 other active wireless networks because I use 2 additional wireless routers for access anywhere in the House. All three of my wireless networks are created from the same internet modem. I want to confirm is whether or not my Mac can be connected to one of the 3 networks for automatic backups on the Time Capsule wireless? Or is the Mac must be connected to the network of the time Capsule for automatic backups to time capsule wireless? Thanks in advance for your help.

  The same as the TC.

  Set the other to extend the network of transport CANADA instead of create a network.

• Problem with Broadcom wireless driver for HP Pavilion 15-p053eu

  Hello, I have a problem with the installation of the broadcom wireless driver for HP Pavilion 15-p053eu running on Windows x 64 8.

  When I download and try to install the driver I get this error...

  

  

  I really don't know what to do...

  Hello:

  If you want to run on your PC W7, good wlan driver BCM you need which should produce a full-power signal.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133353_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You also need this software bluetooth...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132205_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• RE6500 installation problems - cannot find wireless network and wifi protected setup custom exceed 99%

  HII there, I bought a RE6500 rande Extender and wireless network has not automatically shown as the instructions, he will say.

  Ive tried following th online PDF instructions under "Basic settings" and have connected it, so when I go on 'Wireless' under "Connection with the Wi - Fi Protected Setup Button" and press the button on the Extender and the establishment, it does not exceed 99%.

  can anyone help!

  Thank you! I was just trying to find the network on the PC I used to put in place. It was not showing on my PC, but I tried my iphone and it is available here. Then, I followed the installation instructions and did the whole upward on my iphone (not on the PC as I originally did) and it worked. No problems!  Thank you!

• Problems with vista wireless network connection.

  Whenever I try to access the internet via unsecured wireless network I have to reset the modem/router.  Only happens with Vista and does occur only on that network.  No problem on other networks (public) wireless and no problem at home with 3 other computers on this router wireless and internet.

  Hi Skip,

  A. when it last work very well?

  B. has been any changes made to your computer recently?

  C. don't you check the network connection?

  D. is in monitor mode wireless network card?

  Try the methods below.

  Method 1

  The tool the Network Diagnostics which is part of Windows Vista is designed to test the network connection to find errors. The Network Diagnostics tool can also be used to determine if the network-related programs are working correctly. To use this tool to resolve network connectivity problems, follow these steps:

  1. Open Internet Explorer and try to access the Web page that causes network connectivity problems.
  2. On the page that displays an Internet Explorer error message, click diagnose connection problems .

  The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  • He was unable to find a problem.
  • It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Method 2

  Open the link below and click the Fixit who can fix most of the issues related to internet explore.

  http://support.Microsoft.com/kb/936211

  Method 3

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope this has been helpful.

  Thank you
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite A300 - unable to connect to a local wireless network

  Hello

  I have a question: bought a laptop two days ago, the wireless LAN doesn't work. It can detect the network, accepts the network key, he just used to connect.

  Help, please.

  Hello!

  Have you checked the TCP/IP of the WLAN card settings?
  I put t know the network configuration of the router, but if you are using DHCP you must use this mode or you set a static IP address.
  Check it!

  Also, check if your wireless network card is recognized correctly in Device Manager and try to reset your router. This means that you must remove the router AC adapter and wait 5 minutes. Then plug the AC/DC adapter again.
  Sometimes a firmware update might be useful too.

  Good bye