Problem of memory Cache L2 when install ESXi VMware 5 by 8

Similar Questions

• create custom when installing ESXi 5.5 partitions

  Hello

  How to create custom when installing ESXi 5.5 partitions?

  I wish I had the rest of the partitions:

  # df h

  Size of filesystem used Avail use % mounted on

  / dev/sde1 9.7 G 1.5 G 7.7 G 16%.

  / dev/sdc1 1.1 G 99 M 928 M 10% / Boot

  / dev/sde6 4.9 G 138 M 4.5 G 3% / Home

  / dev/sde7 4.9 G 182 M 4.4 G 4% / opt

  / dev/sde8 2% 36 M 1.8 G 2.0 G/tmp

  / dev/sde5 39G 5.3 G / 32G 15% var

  Specifying the size of the partition was something that was done with the classic ESX 3.x or 4.x. With ESXi (installable) there is neither the need nor the ability to define individual partition sizes.

  André

• On partitioning when installing ESXi

  The server does ESXi has an option to create separate partion on install?  I want to put the hypervisor on a partition of 2 GB and then leave the rest to my virtual machine.

  Also would like to know if it's a better way to increase performance on virtual machines?

  No, there is no option available when installing ESXi server partitioning.

  Make sure that you back up the data if everything is present in the system that you want to install ESXi server, because the server ESXi installation wipe the storage that you install in.

  Furthermore ESXi server does not support more than 2 TB of storage space.

  Hope this helps you.

• Initialization failed: press a button to try again... when installing ESXi ISO

  After a repair of an already open a question problem, a new question was raised.  I open another question because this problem is new, and I thought that a new question must be requested in this regard.

  Following the instructions of this question, I have re-recognized my blade twice.  Looking at the KVM, I have not seen a no boot device message, which was to be expected.  I went to re - install ESXi 5.5 (which was already installed on the SD card before the open-ended question) and I am now met with the following message is displayed:

  isolinux: disk error 20, AX = 422D, reader EF

  I rebooted several times the blade to re - try unsuccessfully to installation.  I even went back to an ISO of 5.1 ESXi, who gave the best results.

  The ISOs I use are UCS VMware ISOs downloaded directly from VMware.

  Please check the question as answered future users faced with the same question

  -Kenny

• Problem with installation if updates when installed

  Hello

  as I fought with some problems with Agents, I have studied the docs again.

  That's why I said - allright get later reinstalled (patched) Version the Enterprisemanager.

  When installing, I chose "(obtenir les mises à jour)." These where downloaded, rebooted interfaces.

  However, the installation runs in an error:

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms: enter the SYSMAN user password:

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms:stty: Standardeingabe: Unpassender IOCTL (I/O-Control) as das Gerät

  INFO: oracle.sysman.top.oms:Verify:

  INFO: oracle.sysman.top.oms: Enter password: SYSMAN

  INFO: oracle.sysman.top.oms: process_id:mve1rmclp7j2

  INFO: oracle.sysman.top.oms: [Initializing the RCU Runner MA, run the Action of schema, schema successfully completed Action]

  INFO: oracle.sysman.top.oms:Die Befehlsausfuhrung transx wurde mit dem status 0 sky

  INFO: oracle.sysman.top.oms:process_id:13nzs6kxz2aqx

  INFO: oracle.sysman.top.oms:Failure...

  INFO: oracle.sysman.top.oms:1 or the mistakes that happened in the exercise of the action:

  NEWS: oracle.sysman.top.oms:1):

  ORA-04063: Discovers "SYSMAN. "MGMT$ PA_RECOM_METRIC_SOURCE" contains Fehler

  File: / U02/app/Product/middleware/WHO/SYSMAN/admin/emdrep/SQL/Core/latest/patch/REC/patch_recom_grants. SQL

  Statement: GRANT SELECT ON MGMT$ PA_RECOM_METRIC_SOURCE to MGMT_VIEW

  INFO: oracle.sysman.top.oms:The plugin Repository Configuration failed his method

  And stopped :-(

  Is the code of the view:

  Select

  p.patch_uid as patch_guid,

  p.patch_id as a hotfix,

  p.Abstract as abstract,

  p.classification as the classification,

  t.target_guid as pa_tgt_guid,

  t.target_name as pa_tgt_name,

  t.target_type as pa_tgt_type,

  t.type_display_name as pa_tgt_type_display_name,

  Host.target_name as host_name,

  Host.target_guid as target_guid

  Of

  mgmt_targets host,

  gc_assoc_instances has,

  MOS$ PA_FINAL_RECOM f,.

  MGMT$ ARU_PATCH_RECOM_MD p,.

  mgmt_targets t

  where

  Host.target_type = 'to host '.

  and host.is_group = 0

  and a.assoc_type = 'hosted_by. '

  and f.patch_uid = p.patch_uid

  and f.target_guid = t.target_guid

  and a.source_me_guid = t.target_guid

  and a.dest_me_guid = host.target_guid

  The Table MGMT$ ARU_PATCH_RECOM_MD does not exist - this seems to be the cause of the failure

  Is this a known issue?

  And if so - no work around?

  THX

  Christian

  Edit:

  I checked it on a system installed without the upgrade option selected.

  The table ARU_PATCH_RECOM_MD $ MGMT are here.

  It is being investigated as a bug by our quality assurance team.  For now, please ignore the automatic update and installation should proceed to problem.

• Lack of disks when installing ESXi 4.0 on Dell R710

  I have a Dell R710. I created a Raid 5 with some virtual disks and initialized to them. When I try to install ESXi 4.0, in the select a disk screen, it displays: Disk0, provider: iDRAC; Type: usb; Size: 0.0 B; Empty: y

  No idea what I'm missing?

  It seems that this controller is supported from ESX 4U1 (build 208xxx) - who are you installed?

  Please give points for any helpful answer.

• Problems with the data store when installting ESXi USB

  I had problems getting free ESXi reliable running.  I am able to install a flash drive fine and initially everything works and I am able to create virtual machines.  Upon the first connection to vSphere, told me that there is no data store, so I create one on my controller LSI 400 GB RAID1 8308elp without problem.  However, once I reboot the server ESXi I lose the data store.  When I check my warehouses under Configuration it is listed.  At this point, if I try to create the data store, yet once I get "Error during the configuration of the host".  I read about using fdisk from the console when people have had this problem but there is no access console in the free version.  Is that what I can do to work around this problem?

  Right in the HCL... SAS/SATA-RAID of the lists for older versions, SCSI for the current version... Search within i/o devices for "LSI 8308elp '...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• DRIVER PROBLEM WITH CANON SMARTBASE PC1210D when INSTALLING ON WINDOWS 7 RC 64 - bit EDITION

  I RECENTLY INSTALLED WINDOWS 7 RC 64 bit EDITION, WORKS FINE BUT IT WONT LET ME INSTALL MY CANON PRINTER DRIVER SMARTBASE PC1210D I HAVE TRIED to INSTALL all THE DRIVER FROM THE CANON SITE, ALSO WINDOWS UPDATE cannot FIND ANY DRIVER.
  I ALSO INSTALLED THIS PRINTER ON ANOTHER PC WITH WINDOWS XP (IN NETWORK) IT WORKS FINE ON WINDOWS XP, IT SAME USED LET ME INSTALL AS A NETWORK PRINTER SHARE.
  ANY HELP WOULD BE APPERICATED
  Thank you

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is for Windows 7 Forums.

  This is the place to ask your questions Windows 7 partners.

  The driver problem is not to do with Microsoft.

  CANON has written drivers for their products.

  If CANON does not write a driver for your model of printer for Windows 7, there's no.

  Try a Vista of CANON printer driver. If no available Vista printer, or it does not work, you are out of luck.

  And gently, do NOT enter capitals,

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Error when installing ESXi 5 on 8 workstation

  Hello team,

  I'm dounia. Recently, I completed my training as a VCP on vSphere 5. But when I try to set up a lab in my personal pc using workstation 8, it gives the VT is not enabled on your processor error. I even checked in my physical syustem BIOS and it has been activated. I disabled it and re-enabled again. Then, turn power off and power on the same. But still the same error. I checked the BIOS settings on the operating system prompted but unable to find VT settings on it.

  I am using Windows 7 32-bit operating system

  Intel i3 processor

  I allocated CPU 2 and Core 2, GBB 50 HDD, 2 GB of RAM to the ESXi.

  Please help me!

  Thank you

  Dounia

  Welcome to the VMware communities forum.

  You will need to tweak the virtual machine a little to get VT crossed at the prompt.

  Workstation 8 / Player 4

  Virtualized HV is available for the hardware virtual version 8 virtual machines on the hosts that support Intel VT - x or AMD - V and EPT of IVR. To activate the HV virtualized, select VM-> settings and access the processor settings screen. Check the box 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.' You will see a warning that virtualized HV will make this inconsistent VM with other VMware products. In particular, if this virtual computer is moved to a 5.0 ESXi host, virtualized HV is available without twist additional.

  For more information, please see this document - http://communities.vmware.com/docs/DOC-8970.

• How do I apply the network drivers for CD when installing ESXi 5.0?

  I am completely new to ESXi. I was not able to find the installation instructions, but they have to be there.

  Anyway, I burned the isos of ESXi 5.0 rollup and driver on CD. ESXi enters the installation and then stops with the message on the NICs 'without cards network have been detected. No network adapters are physically connected to the system, or a driver not been located. A third-party driver may be required. I expected to have the ability to point to the cd with the drivers rollup cd, but the only option is to restart. How should I proceed?

  drivers must be in the ESXi installation media.  You can use the generator image and PowerCLI as indicated below.  Same steps apply

  http://KB.VMware.com/kb/2005205

• Install ESXi on laptop

  Hello

  Just again with installation question, how to add NETWORK adapter drivers when installing ESXi in the laptop.

  and a minimum of RAM, HARD drive and other.

  Thank you

  Anand.P.K

  To install ESXi on unsupported hardware, you will need to know if there is a package of drivers for hardware components such as your network card and create an installation with this already injected driver image.

  The minimum requirement for ESXi is 4 GB (you need more memory if you want to run virtual machines however). The basically required disk space depends on the virtual machine to run, for ESXi itself - including the scores of dump - requires less than 10 GB. However, given that it is a laptop, you may have to see if the HARD disk controller is supported as well.

  André

• Error in installing ESXi 5 on PC

  Need help... when installing ESXi, I get an error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine.
  
  What could be the reason for such reason?

  The parameters must be configured in the host system (HP Pavilion). I don't know how this BIOS looks like, you can search settings (settings of the processor usually). As mentioned earlier, after changing the setting, the system power cycle!

  André

• After re-installing ESXi data store

  Dear all,

  We were using VMWare ESX 3.5 on an experimental basis.

  There are 6 hard drives connected to the controller RAID servers. We have created 2 logical drives: 2 drives in RAID 1 and 3 disks + 1 as a spare online in RAID 5. We installed VMware ESX 3.5 on the first logical disk (RAID 1) and after installation added second disc (RAID 5) using the function 'add the data store' in the VMware VI Client as a second data store.

  That the trial period is over, we want to remove VMware ESX 3.5 and replace it with VMware ESXi 3.5. We copied all files with files from virtual computer on the second data store.

  My question is this:

  What will happen with the second data store when installing ESXi 3.5 on the first logical disk (RAID 1)?

  If nothing will happen to the second store of data (RAID 5) during installation, the function 'Add the data store' of the VI Client will allow us to add this data without fomratting store it?

  Thanks in advance,

  Orhan

  There is an option in the installation allowing you not to crush the warehouses of VMFS data - so when you start your new server it should already see the existing data store and you should be able to go through it and see the existing data

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Problems of memory when running Solidworks.

  Original title: access to more than 4 GB of ram

  I have a computer Dell precision PWS690 under Vista Premium. It a 32-bit system. I'm having memory problems when you run Solidworks, saying: I do not have enough memory and I the hang of the program. The it guy installed an additional 8 GB, so I have now 12 GB of ram installed, but I think that it is only for access to less than 4. The Task Manager displays physical memory available to almost zero. Vista can access up to 4 GB of ram, and how to change it. It seems that I have an extra 8 GB that are not accessible. Thank you.

  Hey Sonic drill,

  1 are you facing this issue only when you run Solidworks?

  You can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also read the following article and check.

  Prevention of problems of memory

  If this only happens with Solidworks, you can also get in touch with Solidworks for additional assistance.

  SolidWorks Forum

  SolidWorks is unable to get memory

  Hope this information is useful.

• Network of ESXi - different behavior when installing adapter

  Hi Experts,

  I came across a strange problem on the network adapters section:

  • I was installing the ESXi 5.5 in a standalone Machine (re-usable)
  • When installing, it showed me the error on non detected network cards and I checked the compatibility of the guide and found that it was not a supported network card.
  • Then I installed 'VMware Workstation 10' on the same machine on the host operating system
  • I have created a virtual machine and tried to install 'ESXi' inside the virtual machine [just for curiosity\
  • He installed perfactly without error / warning (s).

  My concern is 'how and why ESXi comes with two different behaviors between installation Metel naked Machine v/s install inside a virtual machine on the same physical host.

  Thanks for your response in advance and I apologize if I am not able to present the screenplay with clarity.

  -Kuldeep Singh

  Under vmware workstation, the virtualized esxi uses the virtual NIC (probably E1000) driver, which is supported.  The host operating system uses its own realtek driver.

  When you try to run ESXi on bare metal, it doesn't have a realtek driver, if it fails.

  It is a driver problem.