Problem of memory Windows xp

Similar Questions

• There seems to be a MAJOR problem (blocking/memory leak) in "subject: House", also known as the Firefox Start Page, at 26.0 Firefox on Windows!

  There seems to be a MAJOR problem (blocking/memory leak) in "subject: House", also known as start up Firefox, 26.0 Firefox Page, Windows!

  seen on:
  -Windows 7 x 64 machine with 12 GB of RAM and high performance CPU (core i7-920)
  -Comments Machine virtual WinXP SP3 (in Oracle VirtualBox) running on the same computer
  -Intel Atom D525 netbook with 4 GB of RAM, running Win7 x 64

  None of these machines are connected through Sync or something like that. The Firefox instance on the virtual machine is a fresh install / clean.

  The problem:
  -100% of cpu usage for 10 seconds, (util in XP) memory usage goes up to 1.7 GB
  -If "subject: House" is actually the Firefox Start Page, it blocks the computer at startup of Firefox for 10 seconds
  -If "subject: House" isn't the Firefox Start Page, startup is fine - BUT if I press the "home" on the toolbar button it loads "on: House" which causes the same question once again

  Sounds that there is a problem with one of the code snippets that are responsible. I've seen several reports on this issue.

  You can set the browser.aboutHomeSnippets.updateUrl pref an empty string on the subject: the page of config to disable loading (new) checked to see if that helps.
  
  You can open the topic: config page through the address bar

  • http://KB.mozillazine.org/about:config

  You must remove the ' storage\moz-security-about + origin "folder in the folder of Firefox to delete already profile stored clips.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Problems of memory when running Solidworks.

  Original title: access to more than 4 GB of ram

  I have a computer Dell precision PWS690 under Vista Premium. It a 32-bit system. I'm having memory problems when you run Solidworks, saying: I do not have enough memory and I the hang of the program. The it guy installed an additional 8 GB, so I have now 12 GB of ram installed, but I think that it is only for access to less than 4. The Task Manager displays physical memory available to almost zero. Vista can access up to 4 GB of ram, and how to change it. It seems that I have an extra 8 GB that are not accessible. Thank you.

  Hey Sonic drill,

  1 are you facing this issue only when you run Solidworks?

  You can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also read the following article and check.

  Prevention of problems of memory

  If this only happens with Solidworks, you can also get in touch with Solidworks for additional assistance.

  SolidWorks Forum

  SolidWorks is unable to get memory

  Hope this information is useful.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• Problem sleeping satellite Windows C50D 8.1 - A - 13 G

  Hello

  I hope someone who knows more about than me power management can help!

  I bought a C50D Satellite - A - 13 G a few days ago and it was fine. However, a problem with the mode 'sleep' has begun today.

  The laptop goes into mode 'sleep' as expected (when the lid is closed or when I press the power button). However, when I press the power button to turn it back on, it comes to life for a few seconds - the screen is on and I can move the mouse and interact with other things - but so goes backward layout 'sleep' again. What can I do to make it work is to close completely by holding down the power button then restarting.

  The laptop is fully charged and plugged or unplugged happy.

  I don't know if this is related, but my mouse won't wake the portable computer, even if it is set to do in its power management settings in Device Manager.

  Everyone knows about this problem in Windows before 8?

  Thank you

  Jason

  Guess what, it s the first time that I m reading on such problem laptop under Windows 8

  I'm not quite sure if his problem software or hardware and, therefore, I recommend you to reset the system.

  How?
  Check this doc: [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  Option called Reset the PC would set the laptop back to factory settings.
  After that the laptop has been reset, test mode "Eve".

• There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

  There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Compaq 15 laptop: I have problem to open windows 8 I do not remember the email from Microsoft outlook

  I have problem to open windows 8... I don't remember the email from Outlook... and I can't open the windows... the computer is Compaq 15 Notebook pc

  Hello @djgenti,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the question of password and he wanted to help!

  First of all, please consult the following document and let me know how it goes:

  HP computers - what to do when you forgot your connection password (Windows 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Problem with OEM Windows 8

  Bought the Y580 with just the 1 TB drive HARD and Windows 8 preinstalled.

  Then, I bought a 64 GB msata disc. Now I know fast drive does not work with windows 8 yet if I just put windows 8 on the msata drive for now.

  Here's the problem:

  OEM Windows 8 stores a product key on bios. I even bought the upgrade pro (more for image .iso than anything else), but when I run it, even when I put the product key in before a reboot, restart, trying to read the key out of the bios (which failed because it is an OEM key for recovery) and it does not give me the opportunity to put in the new key.

  Anyone know of a way to block the key to reading or get windows to clean install on a different drive, then as there are currently on? Maybe use the command prompt in the advanced options of the .iso?

  So I found this:

  http://Forum.NotebookReview.com/IdeaPad-essential/652862-how-install-mSATA-SSD-clone-migrate-Windows...

  http://Lifehacker.com/5837543/how-to-migrate-to-a-solid+state-drive-without-reinstalling-Windows

  Hesitate since cloning does not align the cluster of a HDD with a SSD, but there is a fix for it here.

  I also intend using this:

  http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/disk-partitioning-and-OneKey-recovery-feature/...

  To create a factory like restoration with the adjustments I made

• A problem to stop windows work properly. This message appears after sudden auto restart.

  A problem to stop windows work properly. This message appears after the restart and sudden auto off.

  Computer: dell inspiron 1520, 32 bits, windows vista with SP1 & SP2, CPU 2 GHz, 1 GB of RAM.

  Concerning

  Firoz Martin

  Hello

  1 did you change on your computer?

  2. this problem occur only while playing games?

  3. what game do you play?

  Method 1:

  I suggest you to control in safe mode and run clean boot.

  Step 1:

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Try disable auto restart on system failure and check if you get an error

  Try last good configuration in safe mode and check.

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• Problem of multiple windows. Windows update 0% complete, "ready to set up Windows. "Please do not turn off your computer", etc.

  Hi all, I have recently experienced some of the problems reported here: - Windows update doesn't work (stuck at 0% for the hours) - Windows cannot stop ("preparing to set up Windows. Please don't turn off your computer") - MSE is out of date - I can't unzip files - some programs no longer work - I just can't stop some services (like Windows update). It times out. etc... I have Win7 X 64, and the last update that has worked with success has been about 3 weeks ago. Thanks for your help!

  Very well.

  Given that the 'MemTest... returned some mistakes,' contact the manufacturer for support under your warranty or Service contract. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.