Problem of PICTURE PROCESSOR typing changes

Similar Questions

• Problem sending pictures through texting when the WIFI

  I recently move carrier to Cricket wiresless (Yes uses AT & T network) of the Sprint. Since I made the change, I had problems sending pictures through texting when the WIFI. I contacted the Cricket Wireless support and they had me reset the APN settings, he has to work because I also disabled WIFI at the time. Since then, I realized that I don't have the problem, when I cut the WIFI.

  Someone at - it similar problems?

  I found the resolution on Adroid Central:

  Wow! Presented this to the customer service email of Cricket and they responded in 12 minutes confirming:
  Billy M. (Cricket Wireless)
  16 Dec 08:46

  Hi Evan,

  Please contact the Support of Cricket. I'm sorry to hear about the problems you are having with your MMS then on the WiFi. Our team of network has been aware of this problem and is currently working on a resolution. In the meantime, you can use one of the IP addresses below in your MMS proxy under the APN settings that should solve the problem.

  192.168.196.78
  192.168.196.79
  192.168.196.117
  192.168.196.118

  Thank you
  Billy
  Looks like the guys from reddit were correct and the IP addresses are legitimate.

• I can't reset or refresh my Windows 8. When I try the message appears: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE.

  I bought my PC about year ago. I have windows 8 installed from the beginning. Right after the purchase, I was told by the shop assistant to reset my Windows, so I did as Fallows: parameters - parameters Change PC - general - all remove and reinstall Windows---> who he was. It went ok, no problem, no need to insert additional disks (which I did not at the time of the purchase, by the way - saleswoman told me that recovery of windows, the files are already on the hard drive).  so now after 1 year I am planing to reset or at least update my PC again... but I IMPOSSIBLE. Whenever I try to do the same procedure as described above, I got this message: THERE WAS A PROBLEM RESET YOUR PC, NO CHANGES have BEEN MADE. and that's it!. I have absolutely no idea why. I restore the previous settings of Windows work, with the hope that it will help, but it didn't. Still can not reset my Windows. Anyone have this problem too, or if she had.

  I have attached the picture with this message for a better understanding

  Yes, I bought my PC (Dell) with 8 Windows preinstalled, I was just curious to know if there is a way to extract the product key for the version pre-installed (just in case). Thanks for the support, I will try your method "to create installation for Windows 8 media. But the real question is why I get this message when I try to reset the system "There WAS a PROBLEM of RESET YOUR PC, SUBI NO change".

  See here to prepare a Windows 8.1 with update 1 USB Bootable for installing with a UEFI BIOS from Dell:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  Make sure that you select the correct edition.

  If your system does not on Windows 8.0 updated the BIOS with the latest version before using the installation media:

  http://dellwindowsreinstallationguide.com/updating-the-BIOS/

  The latest version of the BIOS can have improvements that will help the 8.1 Windows to run more easily.

  As you know Windows 8.0 Windows 8.1, I recommend a new installation of Windows 8.1 opposed to reset:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/Windows-8-1-installation/

  You can follow the optional procedures to wipe the drive before installing Windows 8.1:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  Once you have installed Windows 8.1, install all drivers needed Dell system in good order:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-IDs-and-downloading-and-installing-Dell-system-drivers-in-the-correct-order/driver-installation/

  After that, you can install the latest version of Dell backup and restore:

  http://downloads.Dell.com/FOLDER02909509M/1/Backup-and-Recovery_Application_64M9D_WN32_1.8.1.71_A00.exe

  This will make a new internal recovery Partition which is Windows 8.1 with update 1 and not Windows 8.0. You can then do a backup and Dell recovery media if you wish:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/#RecoveryMedia

• How you can know if you want to compare materials is the problem between the processor and the memory when you have black screen!

  Hello

  If you have a black screen which can be if the processor is dead or memory is dead how you know if you do not reserve memory, the problem is the processor or memory?

  I tried this on my computer, I put on the CPU and I got black screen, I put in memory and I got black screen.

  Thank you

  Johan

  Thank you

  so in this case, how you can know if it is the processor or memory is the problem.

  you have to always have book of memory by you to resolve these issues (to make sure if the memory is problem) what memory or processor its work not at all.

  or it is too nested ways!

  Johan

  From what you described, it is possible that the processor, the RAM and the motherboard are all damaged. Or also the cold of power supply the problem (which could be checked for appropriate using a voltmeter). If you do not reply the existing motherboard then without spare parts (RAM, processor and motherboard) to use in tests, there is nothing more you can do with it to test these components.

• Since I upgraded to CS6, I had problems with the permissions being changed on my files!

  Since I upgraded to CS6 I had problems with the permissions being changed on my files after that I have download on my server. I don't know how to fix this. My webhosting service says this is an issue on my end and it seems that CS6 has a CS5.5 with no glitch. How can I fix this to happen?

  Have you installed the 12.03 CS6 update yet?

  Adobe - Dreamweaver Support Center: Updaters

  12/12/12 The last update for Adobe Dreamweaver CS6 includes optimizations for the HiDPI screens, improves performance in Code view, rendering Live View and permissions of the FTP transfer problems addresses.

  Don't forget to restart your computer after installing the updates.

  Nancy O.

• Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the s

  Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the software in my future computer without purchasing another license that is to say with the same license that I bought?

  Yes, you can reinstall it on other machines, if you wish, without having to buy new.  A license allows for activating facilities on two machines and if necessary, you can turn off a machine in order to allow the activation of another.

• Is it possible to lock a picture against accidental changes?

  Maybe it only happens to me - but I already change a developed image instead of working with the virtual copy.

  Is it possible to lock a picture against unwanted changes?

  Hi tlieser,

  It is not a 'locking' feature, but the suggestion of whsprague to create a snapshot is a good idea. You can always undo any changes made to the images, but a snapshot will help you to return to a specific publishing point that you liked. You can do this by right-clicking on a history point and selecting "create Snapshot":

  

  

  It will be recorded and accessible from the snapshots Panel, which exceeds the historical Panel:

  

• Problem with background since the change of head.php file

  Hey everyone, I urgently need help with a small problem I have on my site.

  Today, I spotted on my Web site www.elaundry.com.au that my logo had a link to this topic. I could not find where to change it in the backend of the site so downloaded the file head.php from my server, open in dreamweaver and added a < a href > < /a > tag around the image of the logo in this file. When uploading to the server, it has deleted black background which crosses the site completely. I really need restore it to black as soon as possible. Anyone know the problem? I don't change any php just added to it.

  I have since deleted the < a > < /a > to head.php to see if it suits it, but there was no joy!

  Thanks in advance!

  Refer to your style sheet, but also with JS and other resources refer to your hard drive:

  "file:///Macintosh HD/Users/toni-mareebishop/Downloads/styles.css ".

  Correctly configure you the site in Site Manager before working on these files?

• Problem of annoying keyboard typing wrong characters

  Sometimes when typing my email address instead of the ' @' sign contained a double ' sign appears and it is impossible to get my keyboard to give me the correct sign. I tried to turn the caps on and then turn off; using the SHIFT key. and many other hit but have to close on the web, in total, which is frustrating to say the least. Does anyone else have this problem? Is there a solution? Thanks for your help

  This is the region for the keyboard setting and has nothing to do with the shift keys.

  The "key and the @ key are in different positions in different international keyboards."  Similarly, the result of the use of shift with the 3 button gives different results in different regions.

  The solution is simple and is also easy.  Just follow the steps precisely.

  Control Panel, tab language, region, keyboard & languages, change keyboards, services installed, select the keyboard so that the word "keyboard" is highlighted, click on Add..., find the country the keyboard was bought for, expand the list, so you can see check boxes of the options available, tick one of these boxes.  Press OK. Now select the unwanted country setting that was in the list before hand and remove [you could not do this before or you would have nothing to say the keyboard how to behave while you were doing the rest of the procedure].  Press OK twice.

  Comprehensive work.

• I have a problem with scrolling and typing on the computer.

  Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

  as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

  Hello

  Thanks for posting your question in the Microsoft community.

  I see that you have a hard time to work with the mouse.

  1. What is the brand and model of the mouse?
  2. The problem occurs on any program or when you perform a task in a particular program?

  Try these steps and see if that solves the problem of performance of your mouse.

  Method 1:

  You can check that the mouse buttons are set correct.

  Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:

  You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

  a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
  c. click on the Driver tab, and then click uninstall the driver.

  d. restart the computer and it will automatically re - install the drivers of.

  Note:

  You can also update mouse drivers by visiting the manufacturer's Web site.

  See this link for more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need help on this question or any question about Windows.

• Problem with Capture Date &amp; time change

  I just became aware of a problem with the Date of Capture use to is very strange. Initially, a brief explanation of the import workflow I'm used with jpeg image 6 iPhone since Lightroom Mobile was presented. The images appear in the section of times iPhone app Photo, and from there I transfer to a collection in Lightroom Mobile. Once the collection syncs to Lightroom on my Mac (running latest El Capitan), they sort by capture time and I make choices and rename images. I have a naming preset that adds automatically the date to all the images. Recently, I noticed that some of these images, but not all, have been appointed with the wrong date. I had traveled without my computer - only my iPad, and it was a month before the images have been synced on my Mac it was very obvious that the dates were incorrect. The problem may have expressed earlier, but if the date was off by a day or two he would not have been as sensitive.

  The problem occurs when I take pictures with the app in time of MomentLens company. I use the application because it is designed to work with instant attachment lenses and the case of the Moment (which makes no difference in time to capture problem).

  
  

  Once that the images are added to LR Mobile news for images show good capture date and time. That's when they images sync for LR (latest version) that the problem occurs. And this is not a problem of LR Mobile, such as changes of date and hour occur if images of the iPad are added to LR without using mobile LR (from the iPad to Mac with AirDrop). Looking at the EXIF metadata Panel in LR, images taken with the iPhone camera app show three dates: Date time Original Date time digitized and Date time - all the which three are the same. Show only pictures taken with the application of the time Date time, but it's the same as in the iPhone Photo app and in LR Mobile capture time. However, when I show info on imagine in Lightroom, the time that appears to capture the time is the time that the image has been synchronized (if it came at LR Mobile) or the time that the image has been added to the iPad over wifi. It is also the time that is added to the preselection of naming. Note that if I send a picture directly from the iPhone to the Mac with AirDrop the date and time is correct.

  For the life of me, I can't understand this anomaly. I did thorough Imaging tests, and it happens only with the application of the time - other camera apps do not exhibit this problem. Interestingly, LR recognizes both the time Soft, which is reported under EXIF on the range of software and the lenses of the Moment when it is used with the iPhone the Moment case.

  If anyone has any ideas I'd be pleased to entrance. Thank you

  The link to the file is Dropbox - Photo of the Moment

  I have just confirmed with Exiftool that the sample file does not EXIF:DateTimeOriginal, although it does not contain EXIF:DateTime.

  You can send the following to the current time, the EXIF 2.3 specification:

  

  

• Problem with brushes (impossibility to change)

  I used the C5 version for a pretty long time without problems of any kind related to the brushes, but just a month ago, I started to notice how just the base line that worked properly, leaving me with almost all of the brushes as non-functional. Of course it doesn't mean that they don't 'paint', but the hardness is pretty poor , and the menu does not allow me to change the values.

  I tried to restore the brushes because he helped me once, but it is inefficient.

  I want to thank with all my heart any type of assistance that could be given.

  Finally I found the source of the problem. I had to restore the setting for brushes, do not know if this is the setting, but has all the features that you can give to the brushes. There is a picture of the menu (it's in Spanish but I hope you get the idea)

  • Thank you very much for trying to help me

  

• Problem with font size, is change suddenly wrong with resolution

  Hello!

  It has been two weeks since my Photoshop CS5 has begun to abnormal behavior. Could I humbly ask for your help, please?

  A picture is worth a thousand words, I did a Visual description:

  
  (not sure how to work the forums here, I also uploaded it here)

  In the past, I could open a picture I wanted to, and type in this image, the text would be always the same. The size of the police, in particular, would remain the same. For example, the Segoe Print 18 points would always look the same on an open image.

  And then, about two weeks ago I noticed sometimes problems, policies, at the same size usually, were suddenly huge. I finally got to where he comes from, the resolution of the image.

  If the image resolution is 72, then the fonts are similar to the usual. If the image resolution is higher, the fonts look more great.

  To make the fonts look the same as usual, I have to manually change the resolution, with an Image > Image size, change the resolution to 72 and then, because the dimensions of the pixels fell after changing resolution, write once again the size of initial image pixel.

  For the life of me, I don't understand what I did wrong. I'm not accusing the program, I have checked something without noticing it, somewhere.

  
  A friend did the test on his machine, and he didn't have this issue.

  Here are my program settings, if they are relevant (mirrored here):

  

  If you can help, will have saved a poor Editor, and you'll have my eternal gratitude!

  Stop it! Not resetting preferences. station_two is clueless.

  Your image with pt Verdana 15 to 600 dpi and 72 dpi shows that you get the correct result when you specify the size in points, which is a physical measure (1 pt = 1/72 inch). At 600 dpi to 72 dpi, a given policy will cover 600/72 = 8.33 times more pixels in width and height.

  If you already receive the same coverage of pixel with different resolutions, you were probably specifying the size in pixels instead of points. (At 72 dpi, 1 point is equivalent to 1 pixel, so you do not notice any difference between points and pixels at 72 dpi.)

• problem with upgrade to LR4 (change mode tools develop)

  Hello - I just upgraded LR3 to LR4 on my Windows 7 HP laptop using a CD from B & H Photo. The installation process went through without errors. However, now in develop mode, the editing tools (right of the screen) are always fill LR 3 light - for example, the recovery, and blacks are in the title of the exhibition. I rebooted the computer to see if that would help - no change.

  I guess I could uninstall LR and then reinstall LR3 and the LR4 upgrade, but it's a lot of work and it cannot solve the problem.

  Any suggestions to solve this?

  Thank you!

  pweb0806 wrote:

  In addition, what is PV2012?

  Whoa - you are green...

  In the develop module - check the Version of process in the camera - 2012 (current) change section of Calibration.

  ALT-click is just a shortcut to do the same thing, but without having to respond to a command prompt (to develop the module when an exclamation icon appears, showing an older version of process, such as 2003 or 2010. PV stands for 'Version Process'.

  2012 is the new version of process invented for Lr4 with improved controls and picture quality...

  Rob

• Problems of visualization even after changing gfx.direct2d.disabled to be true

  I had a really weird defect rendered text and images. Searched the net and found the resolution to change the value of gfx.direct2d.disabled from false to true. Things went better and now I see good pages. However, I always discover issues especially with the help of drop down menus - I see not one any of them. Also, if for example my download finishes the small pop-up window that appears at the bottom right corner is visualized in the same way - garbled lines of white-blue with nothing which is distinguished. I would be happy if I could send you a snapshot. The problem does not persist in other browsers, it is not a material one.

  Hello, toggle the gfx.direct2d.disabled false again and toggle the gfx.content.azure.enabled false and check again firefox, otherwise try to
  disable hardware acceleration in Firefox, go to the Firefox button > checkout Options > advanced > General > Browsing: "Use hardware acceleration when available" [].

  Thank you