Problem of pptp Windows ASA 8.4 (4) 1
Hi all
I hope someone can help I have an ASA 5505 that replaces a legacy firewall. Everything works apart from the Dáil in pptp sessions. These are sent to the windows 2003 server.
See below for my config, I'm really stuck now. See below for my config
ASA 4,0000 Version 1
!
hostname ITEFW01
domain ite.local
activate the encrypted password of X/3Ef.pSbYW/QCVY
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
Speed 100
full duplex
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
the IP 10.0.0.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 83.218.142.244 255.255.255.248
!
passive FTP mode
DNS server-group DefaultDNS
domain ite.local
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the External01 object
Home 83.218.142.242
external description
the object Exchange service
tcp destination eq smtp service
network of the External02 object
Home 83.218.142.243
VPN description
service of the PPTP01 object
tcp destination eq pptp service
service of the PPTP02 object
tcp destination eq whois service
network of the External03 object
Home 83.218.142.243
Description address VPN
service object HTTPS
tcp destination eq https service
network of the ITEServer object
host 10.0.0.2
ITE server description
network of the ITEServer02 object
host 10.0.0.3
object-group service Blackberry01 tcp - udp
Description Blackberry01
port-object eq 3101
object-group service Blackberry02 tcp - udp
Description of the Ports of Blackberry
port-object eq 4101
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
the BrianBass object-group network
Email Filtering Proxy description
object-network 217.64.175.0 255.255.255.0
host of the object-Network 62.133.28.58
object-network 83.246.65.0 255.255.255.0
host of the object-Network 87.224.100.82
host of the object-Network 87.224.86.194
network-object 94.100.128.0 255.255.255.240
inside_access_in list extended access permit icmp any one
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access will permit a full
global_access list extended access allow icmp a whole
outside_access list extended access allow accord any object ITEServer
outside_access list extended access permit tcp any object ITEServer eq 1701
outside_access list extended access permit tcp any object ITEServer eq pptp
outside_access list extended access allow HTTPS object any object ITEServer
outside_access list extended access allow object Exchange object-group Brian
s object ITEServer
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
!
network of the ITEServer object
NAT External01 static (inside, outside)
!
NAT source auto after (indoor, outdoor) dynamic one interface
inside_access_in access to the interface inside group
Access-group outside_access in interface outside
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 83.218.142.241 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:0
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 10.0.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmst cold start
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
Telnet 10.0.0.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 10.0.0.10 - 10.0.0.132 inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
username
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the pptp
World-Policy policy-map
class class by default
inspect the pptp
!
service-policy-international policy global
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:59ea3f04159c32cce049d9654c6ade4d
: end
ITEFW01 #.
I have to admit that I don't know if PPTP requires nothing else was open.
But the most common problem is usually lack the "inspect pptp" you have.
I suggest you simply followed the ASA through the ASDM while trying the VPN connection to eliminate situations where the firewall might block connections
There isn't a lot of NAT rules on the firewall itself that I can't prevent connections
You can use the command "packet - trace" to ensure that the firewall (or would rather) to certain connection tent
entry Packet-trace out tcp 1.2.3.4 1234
-Jouni
Tags: Cisco Security
Similar Questions
-
When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
Installation package. A program required for this install to complete could not be run. "Help, please.Hello..
Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
Problem sleeping satellite Windows C50D 8.1 - A - 13 G
Hello
I hope someone who knows more about than me power management can help!
I bought a C50D Satellite - A - 13 G a few days ago and it was fine. However, a problem with the mode 'sleep' has begun today.
The laptop goes into mode 'sleep' as expected (when the lid is closed or when I press the power button). However, when I press the power button to turn it back on, it comes to life for a few seconds - the screen is on and I can move the mouse and interact with other things - but so goes backward layout 'sleep' again. What can I do to make it work is to close completely by holding down the power button then restarting.
The laptop is fully charged and plugged or unplugged happy.
I don't know if this is related, but my mouse won't wake the portable computer, even if it is set to do in its power management settings in Device Manager.
Everyone knows about this problem in Windows before 8?
Thank you
Jason
Guess what, it s the first time that I m reading on such problem laptop under Windows 8
I'm not quite sure if his problem software or hardware and, therefore, I recommend you to reset the system.
How?
Check this doc: [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]Option called Reset the PC would set the laptop back to factory settings.
After that the laptop has been reset, test mode "Eve". -
There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update
Repair Apple Software Update of programs and features, Control Panel, and then try again.
If not for general advice see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
Hello
I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.Any of you have an idea what can do?
Thank you!Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I have problem to open windows 8... I don't remember the email from Outlook... and I can't open the windows... the computer is Compaq 15 Notebook pc
Hello @djgenti,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I came across your post about the question of password and he wanted to help!
First of all, please consult the following document and let me know how it goes:
HP computers - what to do when you forgot your connection password (Windows 8)
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
Bought the Y580 with just the 1 TB drive HARD and Windows 8 preinstalled.
Then, I bought a 64 GB msata disc. Now I know fast drive does not work with windows 8 yet if I just put windows 8 on the msata drive for now.
Here's the problem:
OEM Windows 8 stores a product key on bios. I even bought the upgrade pro (more for image .iso than anything else), but when I run it, even when I put the product key in before a reboot, restart, trying to read the key out of the bios (which failed because it is an OEM key for recovery) and it does not give me the opportunity to put in the new key.
Anyone know of a way to block the key to reading or get windows to clean install on a different drive, then as there are currently on? Maybe use the command prompt in the advanced options of the .iso?
So I found this:
http://Lifehacker.com/5837543/how-to-migrate-to-a-solid+state-drive-without-reinstalling-Windows
Hesitate since cloning does not align the cluster of a HDD with a SSD, but there is a fix for it here.
I also intend using this:
To create a factory like restoration with the adjustments I made
-
A problem to stop windows work properly. This message appears after the restart and sudden auto off.
Computer: dell inspiron 1520, 32 bits, windows vista with SP1 & SP2, CPU 2 GHz, 1 GB of RAM.
Concerning
Firoz Martin
Hello
1 did you change on your computer?
2. this problem occur only while playing games?
3. what game do you play?
Method 1:
I suggest you to control in safe mode and run clean boot.
Step 1:
Advanced, including safe mode startup options
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Try disable auto restart on system failure and check if you get an error
Try last good configuration in safe mode and check.
-
Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now. I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback... Thank you!
~ JeniferIt is without a doubt. There were a few patches published today, and I was able to update all my machines successfully. This looks more like a virus problem. Have you run a virus scan recently? Many times, if you are infected the virus will prevent you to access Windows Update.
You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058. This could also be your problem.
Let me know how it goes,
Barbara
-
Hi all, I have recently experienced some of the problems reported here: - Windows update doesn't work (stuck at 0% for the hours) - Windows cannot stop ("preparing to set up Windows. Please don't turn off your computer") - MSE is out of date - I can't unzip files - some programs no longer work - I just can't stop some services (like Windows update). It times out. etc... I have Win7 X 64, and the last update that has worked with success has been about 3 weeks ago. Thanks for your help!
Very well.
Given that the 'MemTest... returned some mistakes,' contact the manufacturer for support under your warranty or Service contract. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hello
After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
Then a window pops up saying "Startup Repair cannot repair this computer automatically.
The details of the problem say;
Problem event name: StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
Signature of the 04:65537 problem
Signature of the problem 05: unknown
Signature of the 06 problem: BadDisk
Signature of the 09 problem: unknown
Signature of the 10:1168 problemSystem Restore does nothing, and all the other tools of recovery. :(
Please help, it will be much apreciated :)
DOMIf you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates. MS - MVP - Elephant Boy computers - don't panic! -
I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc. After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer. To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen. If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs. I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen. I am able to get to a command prompt, if I select Mode safe mode with prompt at startup. FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive. Any help to resolve this matter will be highly appreciated.
I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.
At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
My repair CD installation was: Windows XP sp2In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.
I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.
I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.
Please let us now if this helped you.
-
have a problem with my Windows Services.
I have a problem with my Windows Services.
Every time when I run the Windows Services window, I get a warning:One or more activex controls could not be displayed because that is:
1. your current security settings prohibit running activex
the controls on this page, or
2. you have blocked an editor of one of the controls.
for example, the page may not display correctly.The warning popup opens only when I click on the extended tab.
The problem has nothing to do with the security of IE, because I can open pages with ActiveX controls on them and so.I installed the Spybot spyware/malware removal tool. Then uninstalled.
I don't know if this is the cause of the problem. But I assume that it is.So, maybe someone faced the same problem and knows the cause for it.
Thank you.
Hi faisalzaman,
Check out the link below to put on with similar problem and check if it helps.
-
Original title: I'm loading Quciktime.
When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?
Hi Tonyb13apb,
· The issue is limited only during the installation of QuickTime?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: Uninstall and reinstall QuickTime and check.
http://support.Apple.com/kb/HT1925
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
a. click Start, select run.
b. type msconfigand click OK.
c. the system dialog Configuration utility appears.
d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
e. When prompted, click on restart to restart the computer.
If the problem persists, you can contact Apple support for more help and information.
http://support.Apple.com/kb/HE57
Let us know if it helps.
Maybe you are looking for
-
Qosmio X 770-can't turn on the wireless
I was log my cell phone with my pc and the next day I me am turned on my pc the wireless connection was disabled.I tried to turn it on of the function key, but it won't let me choose on. Is there a setting that allows me to turn on the wireless?My pc
-
Upgrade the HARD drive, memory and display on Satellite A30 921 driver
I got a model a30-921, satellite phone for two years now. I would ask someone who could help me how to put my hard drive from 40 to the majority and the memory to 1 g. and also where can I find the latest driver for ati mobility radeon igp 9000. Than
-
HP pavilion followed bsod to black screen and the start program menu f10 does not work
Hello Come play a game on my pc when a BSOD pops up... then in a few seconds my pc stops and starts again. But now I'm stuck in a black screen: a disk error occurred press ctrl alt del to restart. When I do, I'm back to the blue screen (the screen wh
-
to disable the properties button on the connections LAN, so the settings cannot be change
Disable the properties button in the settings of local network in XP Hello... I have this problem, I want to disable the button of properties on connections to the LAN so that settings cannot be changed, I know I can just change the user limited, but
-
sqldeveloper.sh connection to the server
It is a follow-up/continuation of dbstart and echo $ORACLE_BASENow try to connect customer sqldeveloper to the server that is running.I watched ORA-12505, TNS:listener does not currently of SID given in connect with but it is on Windows and I am on R