Problem of restoration of pictures on hard drive

Similar Questions

• Restore from an external hard drive on the same hard drive (uncompressed)

  I have an old backup of my files on external 500 GB MYBook I want to restore the hard drive even on the external 500 GB MyBook.  There are a lot of pictures and family videos.  How can I do this without restore on my internal hard drive which has very little space.

  Hello

  1. what type of backup is? What application did you use to create this backup?
  2. What is the extension of this backup file? Is this backup a single file?
  2 have you tried to copy the files and images directly on the hard drive?
   
  If these files are simply saved in the hard disk, you can simply copy and paste the files on the disk. If it's a backup file provide the information identified above to help you further.

  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A205 - Vista backup center and restoration with a WiFi hard drive

  I use Vista Ultimate Center of backup and restore to back up hard drive of my laptop Satellite A205 series on a wireless external hard drive. The external hard drive (which is formatted in NTFS) is directly attached (via USB) to my wireless router Belkin low, instead of being connected directly on my laptop.

  I know that this WiFi network hard drive is recognized by my laptop series Satellite A205, because it appears as "Drive Z:" when I click on 'My Computer'... but the version of "Backup and Restore Center" which appeared on my laptop Satellite A205 only allows backup of DVD or directly - connected hard drive not the readers of (strange for a laptop with built-in WiFi) network.

  By contrast, the version of the backup center and restaurant located on my computer to my lists one office (also Vista), drives on the computer at first - but it includes a "more:"hyperlink by which someone with rights Admin can click and access the network drives. "

  This "more:"hyperlink does not appear on the version of the backup center and restore on my laptop Toshiba Satellite 205. "

  I can't even someone at Microsoft to talk to me without first
  $ 69.95 for the 'privilege '.

  Any suggestions?

  Hi irsharp23,

  > but the version of "Backup and Restore Center" which appeared on my Satellite A205 laptop only allows backup of DVD or directly - connected hard drive not the readers of (strange for a laptop with WiFi built-in) network.
  Laughing out loud
  I think that's not a junk Toshiba. Center backup and restore is designed by Microsoft and Toshiba has nothing to do with it. So I think you need to get in touch with the guys at Microsoft to ask for a solution, or there may be an update for this tool.
  Did you check that?

  Moreover, why n t connect the external DRIVE directly to your laptop drive? I don't see a reason to connect such a disc HARD backup over the network, because this image of backup can be used only on your laptop.

  Alternative, I can recommend Acronis True Image to record images of backup on the network or if you use Microsoft SyncToy to synchronize your files between laptops and network. ;)

• Satellite A205-S4777: are there problems of compatibility of the 320 HARD drive

  I am replacing my sata toshiba with a sata western digital with more memory than he.
  Can someone tell me if there are known compatibility problems.

  Toshiba 200 GB Sata Drive broke down and I am substituting a western digital 320 GB SATA

  I see that you have already improved HARD drive and 320 GB. So you could tell us if you've some HARD drive problems.
  BIOS recognizes the new HARD drive correctly?

  If you have already installed the new HARD drive and have been able to install the operating system, then I put t see serious reasons why new HARD drive shouldn't t work.

• Problems of formatting of the new hard drive in Macbook Pro

  Hello

  My internal hard drive in my MacBook Pro mid 2012 broke down. So I installed a new hard drive a ST1000LM014 of Seagate 1 TB hybrid discs which according to IFIXIT.com must be compatible.

  I then boot the server Apple Macbook and party in disk Utillity to format the hard drive. The hard drive is visible and I'm then in the partition, choose the 1 partition, Mac OS X (journaled) + GUID. But while the partition that I get the error message failed to file system format.

  I tried different options in disk Utillity and I am able to format the disk using FAT or ExFat. But it does not help me to use my mac hard drive.

  Does anyone have any ideas on what to do? And it does not seem like a problem with the functionality of the hard drive?

  Thank you

  You must select the disk of material-name (upper, outermost level descriptor), not Volume name.

• Error reading from disk on startup, but no problem when I remove my external hard drive from Seagate. Solution?

  At startup, windows does not load and, I don't see a black screen says Disk Read Error press Ctrl Alt Del to restart. Upon restart, the same problem occurs. I managed to work around this problem by unplugging all my external hard drives USB, but this problem has never happened before.

  Recently, I laid out my laptop due to a faulty internal hard drive. Windows has been reformatted and a new internal hard drive has been installed. Since then, the above mentioned error occurred and I'm not too sure if those problems are linked, but my Seagate hard drive works fine until I fix it after windows has marketing. Yet once, it never happened before that my laptop has been repaired.

  Appreciate your help.

  Thank you

  S.

  Hello

  to power on you will see a way to get into the program installation/bios or boot menu command at the bottom of the screen

  It would be F2 or delete etc to get into the setup of the bios or F12 forBoot order

  go into the Bios and see if the USB boot is enabled a see also if it 1st in the boot order

  If this is to change the boot order or disable USB boot depending on your Bios options

• Restoration of the external hard drive for Windows 7 System Image

  I created a System Image on my external hard drive. Now when I choose ' select another backup to restore files of "the hard drive is not detected. Even after you reconnect the hard drive and click Refresh it is still not detected.  Help!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.

• Move the copy of pictures on hard drive external

  I am on an iMac plus old (2008), El Capitan running and I want to copy all my pictures and videos in Photos on an external hard drive just in case of death of my office.  Can I do that and still keep my library of photos on my Mac and use it as usual? If so, how do I?

  Thank you

  First, make sure that the drive is formatted as shown in this screenshot:

  

  Then just drag the module external library of Photos of your folder on the hard drive and let the Finder copy it.

  Do you have a backup in place strategy?  If this isn't the case, you should, because at some point, you will lose the files of your boot drive either by accident or in a car accident.  It's inevitable.  Easier to implement backup system is with Time Machine, which comes with every Mac.  Here's how to set up: use Time Machine to back up or restore your Mac - Apple Support

  With a backup like Time Machine, incremental backups on every hour, you will always have a current backup of your important files and libraries available.

  

• Problems starting Tecra S3 - cannot find HARD drive

  Toshiba Tecra S3 runnning windows XP fully updated last week.

  I tried to restore my S3 with a picture made using Acronis, but whenever I start using the disk of the computer is unable to find the hard drives. After several failed attempts, I opted to use the Toshiba restore program to restore the original factory conditions, but after the start he was still unable to find the hard drives and now at start up, I get up is a lack of operation system message.

  Any help would be greatly appreciated

  Hello

  Unfortunately, for me, it looks like a HARD drive malfunction.
  The missing OS error message appeared on my cell phone 6 months ago. I was very surprised because it happened suddenly!

  Finally, I had to change the HARD disk! It was an accident head! So I guess that even happened to you!

  Good luck

• Big problem! Need help! Possible hard drive failure

  I'm scared, I just lost all my photos & videos of my kids (and everything that was on my computer, music, etc.). I have Windows XP.  Since this morning, I had about 20-25 icons of programs on my main screen.  I have been using the Internet and a big box of Windows Recovery appears.  My main screen turned black & all my programs are gone (Microsoft Works, Itunes, all that) with the exception of Internet Explorer & basket (which was empty).   The box of Windows Recovery says that there are 5 errors & had to be fixed immediately.  When he would give me the possibility to activate a recovery program, as I buy, it wouldn't let me go further (I would like to purchase-click & we would say that my was not connected to the internet, which has been (I continued to check).)  There was also a small box near the bottom of the screen saying that there are clusters of hard drive (or something?) detected & my personal data were at risk.    When I go to the start menu & click on my pictures or my music there is nothing there.  I'm panicking.  I started to save the pictures on disks but wasn't anywhere close to saving them all.  Someone please tell me there's a way to save files after a hard disk is perhaps out of service.

  HI Julie,.

  It's the screen of Spyware / Malware... You scan your computer for virus in safe mode? It wipes out all these problems.

  I hope this helps.

  -> You will have all your data on your pc...

• Windows 7 backup and restore not recognizing external hard drives

  My laptop recognizes the drives external hard and other storage devices and I can read and manually copy files, etc for them. But the backup and restore told me that nothing is connected when I try to run it. Also, when I connect the external hard drive to a USB port, the menu that is displayed does not include the option of backup of the device just connect. Is there a setting I need to change in the backup and restore program? Or is there another solution that everyone is aware of it please?

  Hi Sally,

  Thanks for posting your query in Microsoft Community.

  I understand that the backup and restore does not recognize the external hard drive, but Windows doesn't. I'll be happy to help you with your query. Let me ask you;

  1. Is - this happy with all external hard drives or individual?
  2. What kind of backup are trying to create, auto or manual?
  3. You did it recently no specific changes in the computer?

  There may be several reasons why backup & restore does not recognize the external hard drive. Let's check out the steps below.

  Step 1: Connect the device to a USB (Universal Serial Bus) and a different test.

  Step 2: You can check if the services responsible for the backup of restoration & work or not.

  Volume Shadow Copy and backup of Windows service.

  To check the services, you can follow the procedure.

  (a) click Start.

  (b) in the Search tab, type Services.msc , and then press Efriendship.

  (c) now in the services window, locate Windows Backup service and Volume Shadow Copy services. Check if they are started.

  Note: Check the services separately, and then close the Services window.

  Step 3: Run the next Fixit and check if the disc is recognized.

  Click here to launch the Fixit.

  Step 4: You can try to temporarily disable the security software of the computer and check with the question. Later, re-enable the security software.

  See: , disable the anti-virus software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Problem with activation by using two hard drives (XP on one) and Win7 on the other

  I have XP sp3 installed on a hard drive and Win7 on another. I never use XP, I only keep there to keep my Win7 works great.

  I do not remember how did I installed win7, but I pretty sure I booted from a USB key and installed on a new hard drive.

  It seems that XP hard drive is in charge the boot settings, or something because I have set as the boot default HDD (in bios), and then select Windows 7 in boot menu that follows.

  If I select the hard disks Windows 7 the default boot hard drive, Windows restores activation. Select the hard drive with XP and win7 then choosing in the start menu, works very well, the activation is OK again.

  I'll install Win8 (that I already bought), but I still need to figure out what to do with this situation, because I need to replace the hard drive where XP is installed and install Win8 and have a double Win7 and boot 8.

  It is possible to solve the problem of activation, without having me call Microsoft? I use a utility called EasyBCD 2.2 and I was wondering if maybe this program could help fix me.

  Any thoughts?
  Wilfredo.

  Disconnect the drive xp, fix the win7 installation and activate if necessary

• Time Machine works do not successfully (I think) restore on a new hard drive (El Capitan)

  I had the hard drive replaced in my mid-2011 iMac 27 "a couple of days. Everything seems to go well with the Time Machine restore process.

  But it does not appear that all successful backups have occurred within 36 hours since. If a block of half day on "cleaning up previous backups" (sorry, I forgot the exact phrase) or suspended Mid-process, it still seems that the last backup is before the hard drive replacement. Current efforts initiated the process, but it crashes at 519 KB.

  In case it is relevant, full use of storage of my iMac is smaller than the available space on the backup drive.

  What should I do?

  See if anything on this page of the site of the end Pondini can help http://pondini.org/TM/Troubleshooting.html

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else