problem of retro!

Similar Questions

• I made the theme retro hack on my iPod Touch (6g) except my iPod Touch takes forever to reset and it slow now. How can I solve this problem?

  I did the thing retro theme on my iPod Touch yesterday and I didn't know it was a cut in time. I saw many people Twitter that he was cool and fun, so I decided to give it a go. My iPod by Touch takes forever to reset (hold down the lock button and the home button) and finally will come the lockscreen, but now his delay. When I type in my password, my iPod is not save it up to maybe a few seconds later. Sometimes it will just restart completely on its own too. Do I have to drain the battery or try restarting on my PC? The Apple store closest to me is a trip of four hours to a new State.

  Be more careful in the future and always check the information you see on social media.

  Try DFU mode, maybe this will help you, although this is not guaranteed.

  Apple is aware of the problem and working on a fix.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

• Retro-lighting/tick problem

  8 gb Fuze, firmware V01.01.15a.

  When the backlight turns off, the audio picks up a fast tick-tick-tick sound.

  I tested it on all the different backlight settings of the timer up to an hour, and when the backlight turns off, the tick returns. If I press a button to pull the rear backlight, the tick goes. I can work around keep it with the parameter 60 min backlight - the light on all the time - but it's playing table with my battery life.

  Firmware fix?

  Thank you.

  Dang!

  I thought it was the failure to upgrade, but it seems to be the (firmware 01.01.15a).

  I did go back to 01.01.11a and which seems to clear up the tick-tick-tick problem... the backlight is turned off now and I'm listening to crystal clear sound at the moment.

• scrolling problems, running of the depot, retro-typing and cursor and windows boxes freezing in the process of disappearance. Help!

  I have a dell vostro 1000 laptop with windows Vista Basic program. I aggravating problems with scrolling, on each program Web site. I have mozilla firefox, chrome, IE I started to scroll down a page and he yanks back the Summit. This also happens offline. I feel like a tug of war. The other problem is the flashing running drop boxes. When I go to lets say google and I click on the search box type it then starts flashing and hurtling previous search words. It is difficult to stop this. right now I have some difficulties to type this question because I'm going to type a few words and then the cursor disappears also a previous sentence. Sometimes when I go to type a word in the search type box the first letter and then the cursor will return to the leading space and adds the letters before the first letter of the word. I feel like sometimes I write backwards. Oh! time comsuming. It does also offline. I have a wireless keyboard and mouse that I sometimes use the mouse works, then suddenly, the page is pulled to the top and I can only It control a few times with the arrow keys on your laptop. Sometimes, this work and others do not. My AutoFill will in to fill out the forms but the name, the address box etc. will follow down the rest of the form and I do not see other issues. I tried Control Panel for mouse problems and the keyboard and settings sometimes move for the reason so I can't set some options. Can someone please help me I've been struggling with this problem for over a year.

  Hi Butterfly3,

  Welcome to Microsoft Vista answers Forum!

  ·         Does the problem occur even when working with other programs such as WordPad and Notepad?

  (A.) it can happen that if drivers are not updated, you may update the drivers for keyboard and mouse on your machine, see steps to update the drivers:

  (i.) click Start > type in Device Manager in the start search > expand the keyboard and the mouse in Device Manager > right click on drivers > click Properties > click on the driver tab > click on update drivers > click OK.

  Now, restart the computer and check if the keyboard and mouse works fine without any problems.

  (B) if the problem persists, you may need to perform the analysis antivirus on the computer.

  You can also perform a complete analysis of the Service from the link: http://safety.live.com

  A.) you can also check by reducing the hardware acceleration on your computer, follow the steps below to reduce hardware acceleration:

  (i.) click Start > click Control Panel > click on appearance and personalization > click personalization > click on display settings > click Advanced settings > click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  (B) I suggest that you might have to reset the internet settings explorer explore on your computer, download the Microsoft Fix - it of the link which automatically resets the default browser settings, see the link: http://support.microsoft.com/923737

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A 6s Iphone can be fixed after entering the date of 1970, which is a problem of

  My friend was on Facebook and reading a post that suggested that if you change the date on your Iphone 6 s to 1970 he would change the screen to a retro mac Apple symbol, however the phone stopped working. After what happened to my friend google this problem and it seems to me that it is a known problem in the phone. This phone can now be fixed? If this isn't the case, Apple will replace the phone, which is only 2 months old?

  The only chance to solve that you would put it in DFU mode and try to restore again.

  Check out this article to help the user to this topic:

  I put my iOS device to January 1, 1970...

  If this does not work, only Apple could be able to get your device to relive again.

  Find an Apple authorized service provider

• PROBLEMÁTICA SU SERVER POWEREDGE 2900 [CF]

  Buongiorno,

  avrei need di assistenza su ns Server Business power Edge2900.

  Riscontriamo problemática knew a modulo SAS, 450GB 15K da sul retro (4 modules in total) in quanto in contemporanea led giallo (a sinistra) lampeggiano e duct arancio (a destra).

  Sul tastierino invece along questo message: 'Power Edge2900 E18110 HDD 3 FAULT W1228 ROMB BATT.< 24hr="">

  The result is sound hotels?

  speaking saluti

  Buongiorno, the sto contattando by mail.

• U3014 problems

  I just bought my new u3014 and brilliant. It looks great, but unfortunately I encountered some problems basically immediately. Grateful for any advice and suggestions.  My PC is also new and performs a single ASUS nVidia graphics Titan.  I installed the latest drivers and am sure that all the cables are properly connected.

  1. small black lines all over the screen. I was surprised to see them, but they are tiny and thin black lines all over the screen, causing images to look as if some kind of retro fiction filter applies to them. My previous 24 "HP monitor had no such lines.  I tried various resolutions, but of course mainly work in the native 2560 x 1600 a.

  2. you have to look carefully to notice, but there is no on-screen noise all over the screen which makes the black lines kind of 'shift' when you look closely. I noticed it only happens when I use the cable supplied displayport/mini displayport, but does not occur when I use the supplied DVI cable.

  3. apparently, the random color temperature shifts.  It is certainly the most annoying.  The screen seems to change the color temperature according to what is on the screen. For example, if I open a window that is mostly white (like this page of forum for example) to take any office space, but then opened a smallish window that would take, for example, a quarter of the screen space but it is much darker (for example, a library of steam which is gray window dark, almost black), there is a chance that the temperature of color for the entire screen moves instantly.  It is very sensitive and very frustrating.  It seems to happen most often when I use the DVI cable, but also occurs when I use the displayport cable.

  I'm cautiously optimistic with a good displayport cabe (full-size for both ends) may fix all or part of that maybe I'm just something wrong.  No matter which input received with gratitude.

  Thank you.

  Jingjang

  3. apparently, the random color temperature shifts.  It is certainly the most annoying.  The screen seems to change the color temperature according to what is on the screen. For example, if I open a window that is mostly white (like this page of forum for example) to take any office space, but then opened a smallish window that would take, for example, a quarter of the screen space but it is much darker (for example, a library of steam which is gray window dark, almost black), there is a chance that the temperature of color for the entire screen moves instantly.  It is very sensitive and very frustrating.  It seems to happen most often when I use the DVI cable, but also occurs when I use the displayport cable.

  "" I just got my U3014.and was also the experience of the boring ' random color temperature changes.

  I've disabled 'Smart vidéo Mode' Manager display in Dell and changed the preset mode of my media browser Standard, which seems to fix.

• Problems of digitization of document via the HP Solution Center

  Hello:

  I have two laptop computers HP: we'll call Laptop1 and Laptop2.

  Laptop1 has a printer all-in-one HP C309-g attached to it wireless.

  Laptop1 can scan a document using HP Soultion Center for this laptop.

  Laptop2 has a wireless to the printer C309-g.

  HP solutions Center is configured for a printer of HP C6200 series.

  Laptop2 allows its HP Solution Center to scan a document from the printer C309-g?

  If so, how?

  I tried, but I'm having problems:

  Laptop2 keeps looking for series printer C6200 of Laptop2, even if it is currently

  a C309-g printer set as the default printer in printer control heart.

  Any ideas?

  Thank you

  Yes, as long as you install the newest model printer software and SOLUTIONS CENTRE. The software and the latest drivers may be retro-compatible. The old software and drivers, may not be compatible to the FRONT.

• curious problem with extrusion and rotation

  I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

  Example:

  

  I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

  The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

  If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

  https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

  It's about what you just mount the image with a transformative effect to match the extrusion.

  So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

  hope this helps

  https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

  If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

• Urgent: How differentiate between retro and payroll in fast formula

  I wrote a quick formula. This quick form is attached to the element of "basic salary".
  "Base salary" item has retro setting and proration.
  We use retro processes strengthened.
  Improved retro process calls this quick formula to verify the amount of the difference.
  Similarly, oracle payroll will also call the same formula fast when running on the payroll.
  
  Now, our requirement is:
  ----------------------------------
  A few lines in fast formula should not run when FF is called by retro, but it must be run when it is called by the payroll.
  So, how could we know if FF is called process retro or payroll?
  If I have a way to find this, I can run that code using this condition.
  Any pointer in this regard will be highly appreciated.

  None of the above... Just write a function custom PLSQL who will be ID action of payroll as a context parameter & returns the table PAY_PAYROLL_ACTIONS... action_type column to the fast formula. L is for Retro throw.

  In the quick formula, place the specific code in the if condition.

  ATTENTION: Make the formula calculate differently in normal payroll & retro you can cause serious problems of consistency in payments/deductions and their debugging might become impossible in the long term.

  Published by: Maxime bushel Sep 22, 2011 07:00

• Retro-fit a preloader... little help here!

  Hi everyone, I know preloader questions abound in this forum, and I'm sorry to add to them! I'm just having a little difficult to retro - fit my preloader in this code.

  The code below shows the launch button click... function that evokes an external swf. I just it preloads that work, just for some reason a hard time to understand how to make this happen. I have a preloader on the front of my site works without problem, just having trouble finding ways to add to this code... Sorry in advance, but thank you.

  Stop();

  next_btn.addEventListener (MouseEvent.CLICK, NextFrame);

  function NextFrame (e:MouseEvent): void {}
  this.nextFrame ();
  }

  btn_close.addEventListener (MouseEvent.CLICK, closeClick);

  function closeClick (e:MouseEvent): void {}
  parent.removeChild (this);
  }

  
  launch_btn.addEventListener (MouseEvent.CLICK, launchClick);

  function launchClick (e:MouseEvent): void {}
  var request: URLRequest = new URLRequest ("tw_csr.swf");
  var loader: Loader = new Loader()
  Loader.Load (request);
  addChild (loader);
  Loader.x = 480;
  Loader.y =-285;
  closeBook.addEventListener (MouseEvent.CLICK, closeWindow);
  addChild (closeBook);
  closeBook.x = 405;
  closeBook.y = 221,8;
  
  function closeWindow (e:MouseEvent): void {}
  removeChild (closeBook);
  removeChild (loader);
  }
  }

  var closeBook:close_btn = new close_btn();

  use:

  Stop();

  next_btn.addEventListener (MouseEvent.CLICK, NextFrame);

  function NextFrame (e:MouseEvent): void {}
  this.nextFrame ();
  }

  btn_close.addEventListener (MouseEvent.CLICK, closeClick);

  function closeClick (e:MouseEvent): void {}
  parent.removeChild (this);
  }

  launch_btn.addEventListener (MouseEvent.CLICK, launchClick);

  function launchClick (e:MouseEvent): void {}
  var request: URLRequest = new URLRequest ("tw_csr.swf");
  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, preloadF);

  Loader.Load (request);
  addChild (loader);
  Loader.x = 480;
  Loader.y =-285;
  closeBook.addEventListener (MouseEvent.CLICK, closeWindow);
  addChild (closeBook);
  closeBook.x = 405;
  closeBook.y = 221,8;

  }

  function preloadF(e:ProgressEvent) {}

  use e.bytesLoaded and e.bytesTotal for your preload display

  }

  never nest named functions:
  function closeWindow (e:MouseEvent): void {}
  removeChild (closeBook);
  removeChild (loader);
  }

  var closeBook:close_btn = new close_btn();

• Retro pay according to the status of evidence for clone. Erroneous for employees.

  I have an employee xyz. A component called other compensation related to people group Flexfield.
  
  This employee is eligible for this element of hiredate to 5 may Jan,2009.so I changed the people group flexfield from yes to no. on 5 May 09.
  
  I ran the compensation per item for this assignment of the employee. Who got the item other allowance set of elements. With May 1st 09 start date and date end 30 June 09. I got an error like "the item other compensation being retropaid element must have an effective link to the end date.
  
  
  How to solve this problem.
  
  Thank you
  Vinoth.

  You must extend the link of the item for the main item (could be excluded according to your business scenarios) or you must create a retro item (for the main part) and keep the link of the item to the retro element open.

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.