Problem of Satellite A200 - Synaptics Tuoch paved

Hello

I have developed a problem with the Snaptics touchpad on my Satellite A200. Despite the use of different versions of the driver (original, later from Synaptics) showed intermittent problems with the right button.

Sometimes, the green light on the icon in the system tray is on permanently (as if she is continually pressed).

Often when you connect, the touchpad seems "backwards" - type click = right click action.

Would it be something physically wrong with the touchpad?

TIA,

Ross

To be honest I didn t notice of similar questions of touchpad on any of my Satellite notebooks.
Of course, from time to time my touchpad icon appears green because I put my fingers/hand accidentally on the touch area. But it's rare, and to be honest I don't think this could be the reason of your touchpad problem ;)

I have a few questions;
You are using an external USB mouse?
You have no mouse driver installed?

I ask because sometimes a 3rd party mouse driver may affect the functionality of the touchpad.

Instead, we should think that this problem could be related to a hardware problem too.
If it is a hardware problem then a technician must check the functionality of computer touchpad portable s and possibly should replace the defective part.

Best regards

Tags: Toshiba

Similar Questions

  • Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

    Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

    Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

    I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
    Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

    I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

    Help required, please.

    Hello

    Uninstall the existing touchpad driver and install it:

    http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

    Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

  • Problem with Satellite A200 BIOS update

    I recently installed the alert software from Toshiba - through it, I received an alert to install software to improve my Satellite A200 1GH.
    After installing this software I've probably updated the BIOS and now I could not the computer because he wants a password already from the bios.
    I do not managed any password before.
    Please help me solve the problem! Is there a possibility of losing information with this situation?

    Hello

    No you can not lose any information, but in your case I would check for a more RECENT for your system BIOS version because there are some discussions were that other users had the same problem.

    A user reported that a NEWER version has been released and the problem has been resolved, but you should check for it here:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Otherwise, it would be necessary to set the machine to an authorized service partner. If you need a link to find the one closest to your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck

  • Graphic problem on Satellite A200 (PSAE6E)

    There is a problem with my laptop:

    It is the Satellite A200 - 23d PSAE6E. I added 1 GB - DIMM DDR - II 667 MHz Hynix. Memtest86 says no error with memory after a night of continuous operation.
    About a week or two ago the problem started to appear.
    I play Lineage II Interlude (it is built on the Unreal engine). Problem may occur after 15 minutes of play, can only occur after 3 hours - no dependencies to intensively to play or time spent in the game.
    Screen to become as if I put its colors 16 color range and become like the interlaced NTSC video. No resolution and color changes help. Didn't help not leaving the game. If I restart laptop, everything is normal.
    No other game (including LA2-Gracia) or work or multimedia tasks doesn't follow this problem, only Interlude LA2 and UT game. Other 3D games work very well.

    The drivers are original from the recovery CD. Windows Vista HP with automatic updates is enabled.

    And: when I connect external screen keyboard 'falls' are statistically more frequent (10 minutes to 1 hour in game LA2 it uptime).

    What is this and how do I solve this problem?

    Please copy your answers to my e-mail address: foxsandy (at) mail.ru, thank very you much. Sorry for my bad English, I'm from the Russia...

    I believe that no one here can say with certainty why this happen. We can only speculate why something like this.

    My opinion is that there is a problem in the relationship between the graphics card and extra RAM module. There may be a problem to address.
    In the end, you must perform some tests to see exactly what is happening. Try with another 1 GB of RAM from another manufacturer, such as Kingston.

  • Problem of Satellite A200 - 28 p/battery charger

    Hello

    I had a power problem with my battery charger for a while sometimes it would charge when plugged in and others would not, so if I removed the charger to move the laptop it was a bet of 50 / 50 as to whether it would be instantly turn off or not.

    This was not too much a problem as the laptop is not moved too often, but I recently returned home to find my charger did not work at all and the cell phone was off.

    I managed to get hold of a replacement charger just to test it and I found that when it is plugged, flashing blue light which is usually strong watch the charger is plugged, and the times he has stayed solid and allowed me to boot up the laptop lasted almost a minute at best before shutting down completely not even enough time to get transfer important documents I have there.

    Is buying a new battery is going to fix this, or is the problem more likely to be something inside the laptop to be replaced?

    Hello

    I doubt that buy a new battery would solve your problem.
    Why?
    Because the laptop should also work correctly using only the AC adapter.
    So even if the battery is defective or dead, it should be possible to use the laptop connected to the network.

    The laptop has a number of other power resources, including a smart power battery clock real time and these resources are closely linked and one could affect apparent power problems.

    If the DC IN is blue, this means that the AC adapter is connected properly and the power supply correctly. If this is not the case, the adapter may be faulty or there is a problem with the electronic power supply on the motherboard.

    So in this case, the power adapter must be tested if you are sure that the adapter is working properly, then there must be a problem with the motherboard to 100%.

  • Graphic problem with Satellite A200 - 13 M

    Hi all
    I apologize for my English, I'm not a native English speaker.

    2 months ago my laptop wouldn't start.
    I call the Service after sale who tell me to send it in for repair.
    No problem: my laptop came back to me, and it worked fine.

    Now there is a * new * problem (graph): sometimes, and I don't now why, the screen is dirty.
    You can see traces white and white dots all over the screen, especially near the icons.
    It's a little more difficult to explain precisely in English.
    I tried to make a screen, but the bug appear on it; I'll try one tomorrow...

    To make them disappear, I just close the screen, making my laptop into hibernation, and when I open it upwards (immediately), everything is good.
    + Damned, having bug comes back! +

    Someone had this bug?

    _Edit: _
    They have changed the card mother + CPU + graphics card.

    You have described the issue is really strange
    I can t image it could be exactly but if that appears after your GPU and CPU has been changed so I recommend you to contact the ASP again and wonder what goes wrong.

    I put t know if you use a newer graphics driver and BIOS, but you should check if the problem persists even with the update of the BIOS and graphics driver.
    But if you see any improvements so a call of ASP is required

  • Problem startup Satellite A200 - cable test Media ROM

    My Toshiba A200 got a little web slow shipping last night.
    I closed the open programs and tried Ctrl, Alt, DEL, nothing happened, I tried several times, still to no effect (my pc always shows the Manager of tasks immediately after pressing these buttons)

    I turned off the computer when to turn it back on again, not having my attempts to resume normal navigation.
    When I turned it back on, it was very slow, it took forever to get through the "Toshiba Innovation leader 'screen. which always returns"

    After that, appears a white screen with a small white dash in the upper left, and that's all that I could be bothered to wait.
    Pressing F2 and F12 also nothing on the screen (they raise upward and the start menu) start of Toshiba

    It also seems a light knocking / friction noise now that I never had front of the laptop.

    Randomly, last night, after the keys, a black screen came up with white continuous scrolling of the letters, I don't remember much but a few key words were something along the lines of

    "ROM Media test cable" or something like that, again and again.

    Hello!

    > It seems as light knocking / friction noise now that I never had front of the laptop.

    It sounds like a faulty HARD drive and little noise that you said are the result of a faulty HARD drive.
    You can test your disk with the Test Drive of ability physical (Google is your friend), but this is possible only if the computer laptop doesn t hangs on the screen Toshiba (must boot from CD/DVD).

    However, if you have another disk HARD try it because I'm pretty sure that s HARD drive.

    Good bye

  • Problems with the registration of the guarantee for my Satellite A200

    I tried to sign up for my Satellite A200 laptop computer online and it did not work. I then had to send info and proof of purchase for Toshiba and heard nothing yet.
    Emailed Toshiba and heard nothing yet. Number 117 of what laptop Toshiba receipt for support and services. It is what makes me look to buy a Toshiba.

    What service? What support? All I want to do is register my warranty. Is someone there?

    Hello

    I have 2 different Toshiba notebooks and I could save the guarantee of all my books!
    These two laptops are European model Toshiba and I could register the warranty on Toshiba's European support page!

    If you have any problems with your registration, then contact the ASP in your country and ask for help. If they have not responded until now then contact guys.

    I put t know what's wrong in your case, but my recording of security went well and it was not a problem!

    Then contact the guy and ask for help! It cannot be that difficult.

    Good bye

  • Power on second hand Satellite A200-1d(a) problem

    I've had my Toshiba Satellite A200 for awhile now and it was second hand when I got it.
    The AC light flashes constantly and the laptop is free of charge, is it possible to fix this?

    I can't turn on the computer, because there no charge in the battery in any case help would be greatly appreciated.
    Thank you

    Power light flashes is probably a sign that he has a serious problem with electronic control gear.
    Unfortunately, these issues cannot be resolved by the owners of the laptop.

    You should contact the nearest Toshiba service provider, explain the situation and ask for help.

  • Satellite A200-1VD: problem with HDD disk

    Hi friends;

    I'm sorry for my bad English:

    I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

    Don't forget to see the following pictures to understand my problem.

    * - [http://img96.imageshack.us/img96/5339/discv.jpg]
    * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
    * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
    * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
    * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

    Thank you very much

    Hello

    At first was a little bit the theory for a better understanding.

    In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
    The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

    This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

    I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

    I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
    * Important INFORMATION *.

    * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
    * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

    * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

    What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

    If you have any other questions please let us know.

    Bye and good luck.

  • Satellite A200-AH1 does not start problem

    I have this Toshiba Satellite A200 - AH1 laptop computer that will not start.

    The system has 1 GB of RAM, (2x512MB).

    When I remove 1 stick, the system starts without a problem, if I replace it, and the other, the laptop boots also upwards. I tested the two ram slots and ram spent each time.

    The problem of the laptop does not start only seems to happen when the laptop has installed two sticks. I tried even to 2 different new corresponding sticks and still nothing until I remove 1 piece of ram.

    Everyone encountered this problem before?
    Any ideas what the problem may be.

    My only other option would be to install a single piece of 1 GB of ram, but I would really like a better option.

    Thanks in advance...

    > The system has 1 GB of RAM, (2x512MB).
    You got your laptop with these memory modules?
    Are you sure that you are using compatible RAM (DDR2-667)?

  • Satellite A200 - PSAF6A Vista: HDMI video resolution problem

    Hello

    Bought a Toshiba Satellite A200 recently, with a HD2600. Because I can't find an APA Help Forum, I hope someone can help me here.

    I have the following problem.
    I use another manufacturer AL2216W (the only available driver is for XP, which I installed it on Vista Ultimate without any problems) widescreen 22'.

    The monitor is capable of displaying 1680 x 1050 (60 Hz). If I connect it to the analog port of the laptop, I can select the resolution and it works very well.

    If I connect it to (via a DVI - D to HDMI Cable adapter) HDMI port on my laptop, the highest resolution is only 1440 x 900. I already installed the drivers several times, but it does not show the resolution 1680 in digital mode.

    The strange thing is that the monitor is correctly identified with the resolution to 1680 x 1050.

    I use the extended view option, since I want to use both screens.

    Thank you

    What do you think of technical requirements?
    Maybe the graphics card does not offer this resolution for HDMI port. I don't think you can solve this problem with the latest driver from Toshiba. I know that you want to have the digital signal, but if nothing works try to use this adapter.

  • Satellite A200 - 1 M 5: problem closing options...

    Hi all

    I have laptop Satellite A200 - 1 M 5; but he has a very annoying problem that I have found a solution for this. When I choose all options to stop (Reset, sleep, shutdown, Hibernate) it does not work according to the needs. I mean that when I stop it will reset, when I do sleep its reactivation directly but the HARD drive does not work and the stay of the black screen and when I Hibernate it resets if it makes its features. I checked the power settings, but all are good.

    Also, I did a cover for my laptop using the recovery CD but the problem persists. On the other hand, I noticed that when I plug the charger the closing of work and the other are always the same.

    Can someone help me please... knowing I bought it just before 2 months and this problem exists since that time.

    Hello

    It's very strange. I have Satellite A200 and everything works fine. Have you tested with AC power adaptor and batteries? Is the result the same?

  • BIOS on Satellite A200 problem

    I tried to reinstall the bios on Satellite A200, with no result. Now I can't even boot up the laptop. When I called the servise in our town, they say that this computer have only one way to the trash.
    This computer is 3 months old. What can I do with it?

    First of all: what do you mean by "resettlement"? !!! Tried it before and she didn't? Need a better explanation!

    I have sometimes prey that users here (or new users) just explain a bit more detailed problem!
    OK, if the laptop does not start then not entirely for trash.

    Another question: what service did you call? Who was a Toshiba Servicepartner? I think that if it is an OFFICIAL AUTHORIZED SERVICE PARTNER, then they wouldn say that your machine can go directly into a trash can...

    Proceed as follows to save your machine in the Trash:

    1. click on this LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871
    2. search for the of SERVICE AUTHORIZED PARTNER nearest in your country and dial Don t the same as calling you before!
    3. call them and send your machine for them. They should fix your machine because you have always guaranteed on this subject.

    That's all.

    Good bye

  • Closing in on the Satellite A200 problem

    Hello...

    I have a Satellite A200 with Windows XP Pro SP2 and sometimes there is when I have the OS it hangs for about 45 seconds, then start/stop start/stop. Meanwhile, the HARD disk it used a lot.

    In the user accounts from the Control Panel, I changed the way uses connect/disconnect (uncontrolled use welcome screen) when restarting the OS, I get the "Windows is shutting down" and "saving your settings" window and this window disappears. When the window disappears, I get this kick 45 seconds - 1 minute.

    I downloaded the profile "user hive CleanUp" of Microsoft and I still have the problem. I also disabled the system restore.

    Can someone help me?
    Thank you!

    You have a lot of files stored on your HARD drive? Or maybe a lot of programs installed? So in this case I recommend you:

    -clean your system with tools like "TuneUp" 2008
    -Defragment your HARD drive, you will see the evacuation is much faster with a defragmented disk (best result of defragmentation can be gained with "O & O defrag")
    -remove applications
    -get a registry cleaner and let them clean the reg for a huge log can slow down even a really powerful machine

    For example, some of my suggestion that should work...

    :)

    Welcome them

Maybe you are looking for