Problem of scrolling and visibility

Similar Questions

• I have a problem with scrolling and typing on the computer.

  Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

  as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

  Hello

  Thanks for posting your question in the Microsoft community.

  I see that you have a hard time to work with the mouse.

  1. What is the brand and model of the mouse?
  2. The problem occurs on any program or when you perform a task in a particular program?

  Try these steps and see if that solves the problem of performance of your mouse.

  Method 1:

  You can check that the mouse buttons are set correct.

  Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 2:

  You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

  a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
  c. click on the Driver tab, and then click uninstall the driver.

  d. restart the computer and it will automatically re - install the drivers of.

  Note:

  You can also update mouse drivers by visiting the manufacturer's Web site.

  See this link for more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need help on this question or any question about Windows.

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Help: Problem with scrolling my html and objects they keep practicing on my main menu

  Basically whenever I have put an html element in my site of Muse or any other object that I encounter a problem when scrolling downwards beyond this object in the preview. I have a menu bar horizontally located on the top of my site and whenever I scroll html elements and objects

  cut through my menu. Is it possible to fix this? -J' tried pinning of items but may not know. Any help would be greatly appreciated.

  Thank you

  So, you have a Menu pin in the master page but are bunk by page objects when you scroll down? If this is the case, select the Menu in the Master, right-click on it and move to master in the foreground.

  Thank you

  Vinayak

• Problem with wheel scrolling and buttons on Microsoft mouse optical basic v2.0 in Vista

  Hello recently, I logged on to my computer and found out that my laser mouse does not shine by the sensor and the pointer didn't budge when I moved the mouse wheel works only the buttons and scroll

  Why what happened?

  wheel scrolling and buttons on my mouse works nothing else don't

  EDIT: im using a basic v2.0 mouse Microsoft Optical

  Nope it na no:(mais c'est correct, je pense que c'est un problème matériel et j'ai acheté une nouvelle souris qui fonctionne très bien)

  but thanks for your help when even :) as I'm not sure how this forum works, but I think a mod should close this question

• Screen pop-up problem in scrolling Manager

  Hello

  This could be a simple, but one don't know'm stuck. I'm trying to implement a popup screen (mainly for the EULA screen) who has a Manager (Vertical), a RichTextField and a button. I want the EULA text to display in the Manager and only Manager should have not the popup screen scrolling and button to add after the Manager.

  problem: If RichTextField text is small, I can see the text and a button. But if the text is very long time Manager scrolls to all little bit and not able to see the button.

  This is wht m is:

  class ApplicationEulaScreen extends PopupScreen implements FieldChangeListener{    private VerticalFieldManager mainContainer;    private RichTextField eulaText;    private ButtonField okButton;
  
      ApplicationEulaScreen()     {        super(new VerticalFieldManager(VerticalFieldManager.NO_VERTICAL_SCROLL)
  
          mainContainer = new VerticalFieldManager(VerticalFieldManager.VERTICAL_SCROLL | VERTICAL_SCROLLBAR | USE_ALL_HEIGHT);
  
          eulaText = new RichTextField("Indicates whether network connectivity is possible. "        +"A network is unavailable when a persistent or semi-persistent condition prevents the possibility of connecting to that network. Examples include "        +"* The device is out of the coverage area for any network of this type. "        +"* The device is on a network other than the home network (i.e., roaming), and data roaming has been disabled. "        +"* The device's radio is turned off, e.g., because airplane mode is enabled. ", RichTextField.READONLY | RichTextField.USE_TEXT_WIDTH);
  
          okButton = new ButtonField("Ok", ButtonField.FIELD_HCENTER | FOCUSABLE | ButtonField.CONSUME_CLICK);        okButton.setChangeListener(this);
  
          mainContainer.add(eulaText);        add(mainContainer);        add(okButton);
  
      }}
  

  need help on this.

  Hello

  If the RichTextField text is available more space, the button and the text will be disturbed.

  Instead, I suggest you add RichTextField another manager of Vertical and add vertical scrollbars. Add the setExtent in the sublayout of this Vertical Manager.  Add this vertical Manager newly created in your original handler.

  With this, the busy surface wll be same, longer text will be easily visible using scrollbars and button will be also present in his place. Your components will remain in their respective places only.

  Try if it works.

• Image disappears in tilelist when scrolling and sliding

  Hello

  I use vbox as itemrenderer to tilelist. Inside the vbox component image is used. I created the image source using bytearrays. The images are loaded dynamically in tilelist perfectly. But when I scroll the tilelist, or drag the tilelist images then disappear the images that are created dynamically. But the images that are loaded in the application creationcomplete event, these images are not getting any problem means they are visible when I do scroll or drag them. Why this is happening and how to make the visible images of all time. Any help is appreciated.

  With our thanks,

  Srinivas

  Hello

  When you use a bytearray to store an image make sure that it is a new array, not a pointer

  BA: ByteArray = imagedata only points to an image so refreshing the tile cuase list issues you see.

  This will fix it

  var BA: ByteArray = new ByteArray();

  
  ba = imagedata;
   ImageCollection.addItem(ba);  <=== ImageCollection(arrayCollection) is the dataprovider
  

  David

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• M45 S351 problems with scrolling using the touchpad

  I have some problems with scrolling with the touchpad. In some applications, like Mozilla Thunderbird, the touchpad scrolling does not at all! If I contact the right side of the touchpad by finger in Thunderbird, I see the label of Scroll on the screen, but no scrolling occurs. What is the problem? In Opera, I need to click on the browser page to 'activate' the touchpad scrolling and it also irritates cause in IE I do not have such problems: I have lunch just Explorer and scrolling of the works from the beginning... How to solve this problem?

  [Edited by: admin on August 29, 2006 06:52]

  Fix for that is unknown to me, but it turns out that the unit has been tested only with Microsoft products (Designed for Microsoft WXP label applied on the device) and not with other third-party software of the part. This function is not only an example. There are many of them. Please don t see this as a problem.

  On this path, I will not say that you MUST use just preinstalled stuff but there are many things that you have to live with.

  Perhaps someone else knows more about it.

  Good bye

• HP ENVY 17 Notebook PC K1H57EA: Auto-scrolling and disable tapping

  

  I have installedsynaptics 19.4.2 recently with upadte recent windows driver. I have problem with auto-scroll and pointer of freezing. Whenever I open the file or browser that it scrolled down and the mouse pointer from a few time blocks .the freezed the mouse pointer can be made mobile after pressing a key. Whenver, I made the changes in the sense of Samart, the changes remain by default when I check next time. He has not saved. I rarely notice teas problem when I use the jury of the sequence. I couldn't believe it. I have reset my windows also. Why pointer frozen after a key? What is the reason for the auto scroll? Help me please get back on this. Thanks in advance.

  Hello

  Try the following.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72142.exe

  When done, turn off your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  If this has fixed the problem of scrolling, turn your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Satellite L500-1ZP - problems with scrolling

  My Satellite L500-1ZP has problems with scrolling via mouse, touchpad or up/down keys...; the window keep turning towards the start window and the content in the lower part can be kept still. The scroll in the pane bar right guard stutter and go back to the basic position.
  Very annoying.

  Does anyone have an idea for a viable solution?

  A little more info about your latest activities can be very useful.
  I can't imagine you have this problem all the time and I would like to know since when you have this strange problem.

  If you have installed something that can have a negative influence on the scrolling feature?
  Have you tried to roll back the BONES to the bygone era?
  Have you tried to do something to make it work again?

• problem of torsion and touchpad s230u

  Hello!

  I can't find a way to configure the touchpad of my Thinkpad s230u twist as a normal score (Windows 8) device.

  What he does is scroll and select buttons only. I want to act like a normal mouse.

  When I open the properties of the mouse in the control panel and select the UlraNav tab, "Activate the TouchPad" is checked and "Use the pointing with advanced features like device" is also checked.

  Any ideas?

  Thank you.

  Hi again, lucien62

  This driver is compatible with your computer type and operating system, so it should work without a doubt. And it can help your problem, since one of the changes made in this version is supported of the twist. Definitely worth a shot, if nothing else.

  Good luck

  Adam

• Problem with RUNDLL and sthelp.dll.

  I have windows XP on a small Dell Inspiron.  When I start a dialog box titled 'RUNDLL' appears and has the following message: "error loading: C:\Documents and Settings\...\Application Data\sthelp.dll.» The specified module could not be found. "I downloaded Malware Bytes and run a full scan - it found nothing.  I have been devoted to the application of msconfig, clicked on the Startup tab and tried to disable the checkbox where this dll is called upward, but the operating system seems to want to find when they start the computer.  What can I do to get rid of this nuisance? When I close this dialog (RUNDLL), the computer works fine... it is every time at startup.  Any help would be appreciated.

  There is no XP file called stehelp.dll and Googling, there is nothing reasonable and a bunch of bad ideas.

  Looks like it's a vestige of some malware that has been partially removed from your unspecified brand system and the model with the specified, unspecified XP Service Pack version and not specified where the antivirus/antimalware applications.

  These message types are quite common things to do after that some malware was only partially removed FRO your system, so I suggest the following:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns
  .  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry.  There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html

  Consider making a manual, just System Restore Point in case you have to undo the changes.

  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Do a complete analysis from time to time when you have more time (in hours).

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

• I need help with a problem of scrolling on my laptop

  I have a toshiba laptop with windows vista. The problem is with scrolling and it started this morning after getting information from the Washington Post, where executives of information jump every 5 seconds. Before I entered the Post, my computer was scrolling smoothly and quickly. Now, he jumps at a slow pace, even after that I release the square keys.

  I tried to find something in the Control Panel, but there was nothing there for the problem. I then cut the modem, thinking that would help, but nothing.

  Soon I'll be 80 and not computer wise.

  I would give to apreciate any help!

  Happy new year

  John

  Hi again,

  I have a laptop Toshiba Satellite that gives me problems with scrolling since 12/31/11. Bikest T recommended something that fixed the problem for about 1 to 2 hours and he returned. I use a pad and the up/down keys. No mice. If I used either top or key frame/presentation will continue to jump, at a very slow pace for executives from 4 to 7 after the button is released and I can't stop fucking her.

  I tried the driver Dective who said I had an outdated driver. Being a novice in computer science, I tried, without success, to how this problem could be fixed.

  I had this same problem about a year ago and I don't remember how it was corrected.

  At the time, that this problem is back, I was on The Washington Post watch automatic 5 second frame advances and once they stopped, my smooth scrolling stopped and my scrolling problem started. Any help would be appreciated.

  Happy new year!

  John

  Hi sandanZY

  I merged your new thread on this subject in this thread. Please use the address on the bottom of the message in this thread rather than creating new threads on the same topic.

  Thank you.   :)

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.