problem of site 2 site vpn
Greetings. We have a site 2 site vpn 2 asa5510-based work. The two sites are accessible internel network hosts, but we are unable to access all the services (such as the TFTP or CA)? or even ping hosts in the remote site of our local asa5510 network. It seems that ASA attempts to send packets directly through the default gw, bypasing the vpn tunnel. Any help would be very appreciate.
PS We checked the ACLs on both devices, so more than likely, this is not the problem.
Hello
Since you did not include public ip address of the external interface in the Crypto ACL, it's why he's not going in the tunnel.
Add Crypto ACL a statement where qualify you this statement outside the public ip address of the interface source and mirror image in the remote device.
HTH
Sangaré
Pls rate helpful messages
Tags: Cisco Security
Similar Questions
-
Problem on site to site and between router vpn client series 2,800
Hello
I need a little help.
I have 2 office of connection with a site to site vpn
Each site has a dry - k9 router 800 series.
Each router has actually client ipsec vpn active and all users can connect by using the client vpn with no problems.
I added the lines for the vpn site to another, but the tunnel is still down.
Here the sh run and sh encryption session 2 routers:
OFFICE A
version 15.3
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
OFFICE-A-DG host name
!
boot-start-marker
boot-end-marker
!
AQM-registry-fnf
!
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login xauthlist local
AAA authorization exec default local
AAA authorization exec vty group xauthlocal
AAA authorization exec defaultlocal group bdbusers
AAA authorization groupauthor LAN
!
!
!
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-220561722
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 220561722
revocation checking no
rsakeypair TP-self-signed-220561722
!
!
TP-self-signed-220561722 crypto pki certificate chain
certificate self-signed 01
quit smoking
!
!
!
!!
!
dhcp WIRED IP pool
Network 10.0.0.0 255.255.255.0
router by default - 10.0.0.254
Server DNS 10.0.0.100
!
!
!
8.8.8.8 IP name-server
no ip cef
No ipv6 cef
!
!
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!!
!
!
!
!
VDSL controller 0
!
property intellectual ssh rsa ssh key pair name
property intellectual ssh version 2
property intellectual ssh pubkey-string
!
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 20
md5 hash
preshared authentication
OFFICE-B-IP address ISAKMP crypto key XXXXX
!
ISAKMP crypto client configuration group remoteusers
key XXXX
DNS 10.0.0.100
WINS 10.0.0.100
domain.ofc field
pool ippool
ACL 101
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
tunnel mode
Crypto ipsec transform-set esp - esp-md5-hmac xauathtransform
tunnel mode
!
!
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
Crypto-map dynamic dynmap 20
Set transform-set RIGHT
!
!
map clientmap client to authenticate crypto list userathen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
20 ipsec-isakmp crypto map clientmap
defined OFFICE-B-IP peer
Set transform-set RIGHT
match address 115
!
!
!
!
!
!
!
ATM0 interface
no ip address
No atm ilmi-keepalive
PVC 8/35
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface Ethernet0
no ip address
Shutdown
!
interface FastEthernet0
INTERNAL description
switchport access vlan 10
no ip address
!
interface FastEthernet1
no ip address
Shutdown
!
interface FastEthernet2
switchport access vlan 10
no ip address
!
interface FastEthernet3
switchport access vlan 10
no ip address
!
interface Vlan1
no ip address
Shutdown
!
interface Vlan10
IP 10.0.0.254 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface Dialer0
the negotiated IP address
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Authentication callin PPP chap Protocol
PPP pap sent-name of user password xxx xxx 0
clientmap card crypto
!
router RIP
version 2
10.0.0.0 network
network 192.168.1.0
!
IP local pool ippool 10.16.20.1 10.16.20.200
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
the IP nat inside source 1 interface Dialer0 overload list
overload of IP nat inside source list 101 interface Dialer0
IP route 0.0.0.0 0.0.0.0 Dialer0
!
!
access-list 22 allow 10.16.20.0
access-list 22 permit 10.16.20.0 0.0.0.255
Note access-list 101 * ACL SHEEP *.
access-list 101 deny ip 10.0.0.0 0.0.0.255 10.16.20.0 0.0.0.255
access-list 101 permit ip 10.0.0.0 0.0.0.255 any
access-list 115 permit ip 10.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255
!
!
!
control plan
!
!
!
MGCP behavior considered range tgcp only
MGCP comedia-role behavior no
disable the behavior MGCP comedia-check-media-src
disable the behavior of MGCP comedia-sdp-force
!
profile MGCP default
!
!
!
!
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
exec-timeout 0 0
preferred transport ssh
transport input telnet ssh
!
Scheduler allocate 20000 1000
!
endOFFICE B
OFFICE-B-DG host name
!
boot-start-marker
boot-end-marker
!
AQM-registry-fnf!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login xauthlist local
AAA authorization exec default local
AAA authorization exec vty group xauthlocal
AAA authorization exec defaultlocal group bdbusers
AAA authorization groupauthor LAN
!
!
!
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-1514396900
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1514396900
revocation checking no
rsakeypair TP-self-signed-1514396900
!
!
TP-self-signed-1514396900 crypto pki certificate chain
certificate self-signed 01
quit smoking!
!
8.8.8.8 IP name-server
no ip cef
No ipv6 cef
!
!
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
license udi pid C887VAM-K9 sn FCZ191362Q7
!
!!
!
!
!
VDSL controller 0
!
property intellectual ssh rsa SSH key pair name
!
!
crypto ISAKMP policy 1
md5 hash
preshared authentication
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 20
md5 hash
preshared authentication
encryption XXXX isakmp key address IP-OFFICE-A!
ISAKMP crypto client configuration group remoteusers
key xxxx
DNS 192.168.1.10
WINS 192.168.1.10
rete.loc field
pool ippool
ACL 101
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
tunnel mode
Crypto ipsec transform-set esp - esp-md5-hmac xauathtransform
tunnel mode
Crypto ipsec transform-set esp - esp-md5-hmac rtpset
tunnel mode
!
!
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
Crypto-map dynamic dynmap 20
Set transform-set RIGHT
!
!
map clientmap client to authenticate crypto list userathen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
20 ipsec-isakmp crypto map clientmap
peer IP-OFFICE-A value
Set transform-set RIGHT
match address 115
!
!
!
!
!
!
!
interface Loopback1
no ip address
!
ATM0 interface
no ip address
No atm ilmi-keepalive
PVC 8/35
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface Ethernet0
no ip address
Shutdown
!
interface FastEthernet0
switchport access vlan 30
no ip address
!
interface FastEthernet1
switchport access vlan 30
no ip address
!
interface FastEthernet2
switchport access vlan 20
no ip address
!
interface FastEthernet3
switchport access vlan 10
no ip address
!
interface Vlan1
no ip address
Shutdown
!
Vlan30 interface
IP 192.168.1.254 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface Dialer0
the negotiated IP address
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Authentication callin PPP chap Protocol
PPP pap sent-name to user
clientmap card crypto
!
router RIP
version 2
10.0.0.0 network
network 192.168.1.0
!
IP local pool ippool 10.16.20.201 10.16.20.250
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
the IP nat inside source 1 interface Dialer0 overload list
overload of IP nat inside source list 101 interface Dialer0
IP nat inside source static tcp 192.168.1.100 5060 interface Dialer0 5060
IP nat inside source static tcp 192.168.1.100 5061 interface Dialer0 5061
IP nat inside source static tcp 192.168.1.100 5062 interface Dialer0 5062
IP nat inside source static tcp 192.168.1.100 5063 5063 Dialer0 interface
IP nat inside source static tcp 192.168.1.100 5064 interface Dialer0 5064
IP nat inside source static udp 192.168.1.100 5060 interface Dialer0 5060
IP nat inside source static udp 192.168.1.100 5061 interface Dialer0 5061
IP nat inside source static udp 192.168.1.100 5062 interface Dialer0 5062
IP nat inside source static udp 192.168.1.100 5063 5063 Dialer0 interface
IP nat inside source static udp 192.168.1.100 5064 interface Dialer0 5064
IP nat inside source static tcp 192.168.1.100 3541 interface Dialer0 3541
IP nat inside source static udp 192.168.1.100 3541 interface Dialer0 3541
IP route 0.0.0.0 0.0.0.0 Dialer0
!
!
sheep allowed 10 route map
corresponds to the IP 150 101
!
access-list 22 allow 10.16.20.0
access-list 22 permit 10.16.20.0 0.0.0.255
access list 101 deny ip 192.168.1.0 0.0.0.255 10.16.20.0 0.0.0.255
ACCESS-list 101 permit ip 192.168.1.0 0.0.0.255 any
access-list 115 permit ip 192.168.1.0 0.0.0.255 10.0.0.0 0.0.0.255
!
!
!
control plan
!
!
!
MGCP behavior considered range tgcp only
MGCP comedia-role behavior no
disable the behavior MGCP comedia-check-media-src
disable the behavior of MGCP comedia-sdp-force
!
profile MGCP default
!
!
!
!
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
exec-timeout 0 0
password Password02
preferred transport ssh
transport input telnet ssh
!
Scheduler allocate 20000 1000
!
endThanks in advance for any help :)
the site at the other tunnel is mounted, but it does not pass traffic; What is the source and destination ip on the router that you are trying to ping the address
whenever you try to open the traffic from router A to router B, you must to the source of the traffic.
for ex,.
Router A-->10.1.1.1--fa0/0
Router B - 172.168.1.100
source of ping 172.168.1.100 router # 10.1.1.1
After doing the pings, send the output of the show counterpart of its crypto ipsec
at both ends -
IPSec site to site VPN cisco VPN client routing problem and
Hello
I'm really stuck with the configuration of ipsec site to site vpn (hub to spoke, multiple rays) with cisco vpn remote client access to this vpn.
The problem is with remote access - cisco vpn client access - I can communicate with hub lan - but I need also communication of all lans speaks of the cisco vpn client.
There are on the shelves, there is no material used cisco - routers DLINK.
Someone told me that it is possible to use NAT to translate remote access IP-lan-HUB customers and thus allow communication - but I'm unable to set up and operate.
Can someone help me please?
Thank you
Peter
RAYS - not cisco devices / another provider
Cisco 1841 HSEC HUB:
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key x xx address no.-xauth
!
the group x crypto isakmp client configuration
x key
pool vpnclientpool
ACL 190
include-local-lan
!
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec transform-set esp-3des esp-sha-hmac 1cisco
!
Crypto-map dynamic dynmap 10
Set transform-set 1cisco
!
card crypto ETH0 client authentication list userauthen
card crypto isakmp authorization list groupauthor ETH0
client configuration address card crypto ETH0 answer
ETH0 1 ipsec-isakmp crypto map
set peer x
Set transform-set 1cisco
PFS group2 Set
match address 180
card ETH0 10-isakmp ipsec crypto dynamic dynmap
!
!
interface FastEthernet0/1
Description $ES_WAN$
card crypto ETH0
!
IP local pool vpnclientpool 192.168.200.100 192.168.200.150
!
!
overload of IP nat inside source list LOCAL interface FastEthernet0/1
!
IP access-list extended LOCAL
deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
deny ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
IP 192.168.7.0 allow 0.0.0.255 any
!
access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
!
How the DLINK has been configured for traffic between the site to site VPN subnets? You are able to add multiple remote subnets on DLINK? If you can, then you must add the pool of Client VPN subnet.
Alternatively, if you cannot add multiple subnet on DLINK router, you can change the pool of Client VPN 192.168.6.0/24, and on the crypto ACL between the site to site VPN, you must edit the 180 existing ACL
DE:
access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 180 allow ip 192.168.200.0 0.0.0.255 192.168.1.0 0.0.0.255
TO:
access-list 180 allow ip 192.168.6.0 0.0.1.255 192.168.1.0 0.0.0.255
Also change the ACL 190 split tunnel:
DE:
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.200.0 0.0.0.255
TO:
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.6.0 0.0.0.255
access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.6.0 0.0.0.255
Finally, replace the remote subnet 192.168.7.0/255.255.255.0 192.168.6.0/255.255.254.0 DLINK.
Hope that helps.
-
Site to Site VPN problem ASA 5505
Hello
I have a strange problem with a site to site VPN. I configured it completely and I added 3 of my internal networks to be encrypted and access the remote network across the tunnel.
For some reason, I can access the remote network of only two of the three internal networkls that I've specified.
Here is a copy of my config - if anyone has any info I would be happy of course.
Thank you
Kevin
FK - U host name. S. - Raleigh - ASA
domain appdrugs.com
activate 08PI8zPL2UE41XdH encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
name Maridian-primary-Net 192.168.237.0
Meridian-backup-Net 192.168.237.128 name
name 10.239.192.141 AccessSwitch1IDFB
name 10.239.192.143 AccessSwitch1IDFC
name 10.239.192.140 AccessSwitch1MDFA
name 10.239.192.142 AccessSwitch2IDFB
name CiscoCallManager 10.195.64.206
name 10.239.192.2 CoreSwitch1
name 10.239.192.3 CoreSwitch2
name 10.195.64.17 UnityVM
name 140.239.116.162 Outside_Interface
name 65.118.69.251 Meridian-primary-VPN
name 65.123.23.194 Meridian_Backup_VPN
DNS-guard
!
interface Ethernet0/0
Shutdown
No nameif
security-level 100
no ip address
!
interface Ethernet0/1
nameif outside
security-level 60
address IP Outside_Interface 255.255.255.224
!
interface Ethernet0/2
nameif Inside1
security-level 100
IP 10.239.192.7 255.255.255.128
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 50
IP 192.168.1.1 255.255.255.0
management only
!
boot system Disk0: / asa804 - k8.bin
Disk0: / asa804.bin starting system
passive FTP mode
DNS domain-lookup outside
DNS domain-lookup Inside1
management of the DNS domain-lookup service
DNS server-group DefaultDNS
Server name 10.239.192.10
domain appdrugs.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the DM_INLINE_NETWORK_1 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.0
object-network 10.239.192.128 255.255.255.128
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
the purpose of the echo icmp message service
response to echo icmp service object
the DM_INLINE_NETWORK_2 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
the DM_INLINE_NETWORK_3 object-group network
network-object 10.195.64.0 255.255.255.192
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
the DM_INLINE_NETWORK_5 object-group network
Maridian-primary-Net network object 255.255.255.128
Meridian-backup-Net network object 255.255.255.128
the DM_INLINE_NETWORK_6 object-group network
Maridian-primary-Net network object 255.255.255.128
Meridian-backup-Net network object 255.255.255.128
object-group network Vital-network-hardware-access
host of the object-Network UnityVM
host of the CiscoCallManager object-Network
host of the object-Network AccessSwitch1MDFA
host of the object-Network AccessSwitch1IDFB
host of the object-Network AccessSwitch2IDFB
host of the object-Network AccessSwitch1IDFC
host of the object-Network CoreSwitch1
host of the object-Network CoreSwitch2
object-group service RDP - tcp
EQ port 3389 object
the DM_INLINE_NETWORK_7 object-group network
Maridian-primary-Net network object 255.255.255.128
Meridian-backup-Net network object 255.255.255.128
host of network-object Meridian-primary-VPN
host of the object-Network Meridian_Backup_VPN
the DM_INLINE_NETWORK_9 object-group network
host of the object-Network Outside_Interface
Group-object Vital-equipment-access to the network
object-group service DM_INLINE_SERVICE_2
will the service object
ESP service object
the purpose of the service ah
the eq isakmp udp service object
object-group service DM_INLINE_SERVICE_3
ICMP service object
the purpose of the echo icmp message service
response to echo icmp service object
the DM_INLINE_NETWORK_4 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
the DM_INLINE_NETWORK_8 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
Outside_access_in list extended access permit icmp any any echo response
Access extensive list Maridian-primary-Net ip Outside_access_in 255.255.255.128 DM_INLINE_NETWORK_8 object-group enable
Access extensive list Meridian-backup-Net ip Outside_access_in 255.255.255.128 DM_INLINE_NETWORK_3 object-group enable
Inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.0.0.0 255.0.0.0
Access extensive list ip 10.239.192.0 Inside_nat0_outbound allow Maridian-primary-Net 255.255.255.0 255.255.255.128
Inside_access_in to access ip 10.0.0.0 scope list allow 255.0.0.0 all
Inside1_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.0.0.0 255.0.0.0
Inside1_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 Maridian-primary-Net 255.255.255.128 ip
Inside1_nat0_outbound list extended access permitted ip object-group Meridian-backup-Net DM_INLINE_NETWORK_2 255.255.255.128
Access extensive list ip 10.239.192.0 Inside1_nat0_outbound allow 255.255.255.0 10.239.199.0 255.255.255.192
Access extensive list ip 10.195.64.0 Inside1_nat0_outbound allow 255.255.255.192 10.239.199.0 255.255.255.192
Inside1_access_in to access ip 10.0.0.0 scope list allow 255.0.0.0 all
Outside_1_cryptomap list extended access allowed object-group DM_INLINE_SERVICE_1-DM_INLINE_NETWORK_1 Maridian-primary-Net 255.255.255.128 objects
Outside_2_cryptomap list extended access permitted ip object-group Meridian-backup-Net DM_INLINE_NETWORK_2 255.255.255.128
permitted access Vital-network-Access_splitTunnelAcl-list standard 10.239.192.0 255.255.255.128
permitted access Vital-network-Access_splitTunnelAcl-list standard 10.195.64.0 255.255.255.0
permitted access Vital-network-Access_splitTunnelAcl-list standard 10.239.192.128 255.255.255.128
Access extensive list ip 10.239.199.0 Vital_VPN allow 255.255.255.192 object-group Vital-equipment-access to the network
Vital_VPN list extended access allow icmp 10.239.199.0 255.255.255.192 object-group Vital-equipment-access to the network
Vital_VPN of access allowed any ip an extended list
Outside_cryptomap_1 list extended access allowed object-group DM_INLINE_NETWORK_4 Maridian-primary-Net 255.255.255.128 ip
access list Vital-Site-to-site access extended allow ip object-DM_INLINE_NETWORK_5 group Vital-network-hardware-access object
Vital-Site-to-Site-access extended access list permits object-group DM_INLINE_SERVICE_3-group of objects DM_INLINE_NETWORK_6 object-group Vital-equipment-access to the network
Vital-Site-to-Site-access extended access list permits object-group objects object-group DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_7 DM_INLINE_SERVICE_2-group
pager lines 24
Enable logging
exploitation forest asdm warnings
Outside 1500 MTU
MTU 1500 Inside1
management of MTU 1500
mask IP local pool access remote 10.239.199.11 - 10.239.199.62 255.255.255.192
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
Global (1 interface external)
NAT (Inside1) 0-list of access Inside1_nat0_outbound
NAT (Inside1) 1 10.0.0.0 255.0.0.0
Access-group Outside_access_in in interface outside
Access-group Inside1_access_in in interface Inside1
Route outside 0.0.0.0 0.0.0.0 140.239.116.161 1
Route Inside1 10.192.52.0 255.255.255.0 10.239.192.1 1
Route Inside1 10.195.64.0 255.255.240.0 10.239.192.1 1
Route Inside1 10.239.0.0 255.255.0.0 10.239.192.1 1
Route Inside1 10.239.192.0 255.255.248.0 10.239.192.1 1
Route out of the Maridian-primary-Net 255.255.255.0 Outside_Interface 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 66.104.209.192 255.255.255.224 outside
http 192.168.1.0 255.255.255.0 management
http 10.239.172.0 255.255.252.0 Inside1
SNMP-server host Inside1 10.239.132.225 community appfirestarter * #*.
location of Server SNMP Raleigh
contact Server SNMP Kevin mcdonald
Server SNMP community appfirestarter * #*.
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Server SNMP traps enable entity config change
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto Outside_map 1 corresponds to the address Outside_cryptomap_1
card crypto Outside_map 1 peer set VPN-primary-Meridian
Outside_map 1 transform-set ESP-3DES-MD5 crypto card game
card crypto Outside_map 1 defined security-association life seconds 28800
card crypto Outside_map 1 set security-association kilobytes of life 4608000
card crypto Outside_map 2 corresponds to the address Outside_2_cryptomap
card crypto Outside_map 2 set peer Meridian_Backup_VPN
map Outside_map 2 game of transformation-ESP-3DES-MD5 crypto
card crypto Outside_map 2 defined security-association life seconds 28800
card crypto Outside_map 2 set security-association kilobytes of life 4608000
card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
outside access management
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
tunnel-group-list activate
internal strategy of State civil-access to the network group
Group Policy attributes Vital access to the network
value of server DNS 10.239.192.10
value of VPN-filter Vital_VPN
Protocol-tunnel-VPN IPSec webvpn
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value vital-network-Access_splitTunnelAcl
value of remote access address pools
internal state civil-Site-to-Site-GroupPolicy group strategy
Civil-site-a-site-grouppolicy-strategie status of group attributes
value of VPN-filter Vital-Site-to-Site-access
Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
username APPRaleigh encrypted password m40Ls2r9N918trxp
username APPRaleigh attributes
VPN-group-policy Vital-network access
type of remote access service
username, password kmadmin u8urNz44/I.ugcF. encrypted privilege 15
tunnel-group 65.118.69.251 type ipsec-l2l
tunnel-group 65.118.69.251 General-attributes
Group Policy - by Defaut-vital-site-a-site-grouppolicy
IPSec-attributes tunnel-group 65.118.69.251
pre-shared-key *.
tunnel-group 65.123.23.194 type ipsec-l2l
tunnel-group 65.123.23.194 General-attributes
Group Policy - by Defaut-vital-site-a-site-grouppolicy
IPSec-attributes tunnel-group 65.123.23.194
pre-shared-key *.
remote access of type tunnel-group Vital access to the network
tunnel-group Vital access to the network general-attributes
Access to distance-address pool
Group Policy - by default-state civilian access to the network
tunnel-group Vital access to the network ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:a080b1759b57190ba65d932785ad4967
: endcan you confirm if we have the exact reflection of crypto acl at the other end
I feel may be you have a 24 10.239.192.0 255.255.255.0 on the other end in the remote network
can you please confirm that
also a reason, why you use 10.239.192.0 255.255.255.128 and 10.239.192.128 255.255.255.128 instead of 10.239.192.0 255.255.255.0
-
Problems with site-to-site vpn
Hello world
I recently received the mission assigned to the site to site vpn configuration and this is my first time. I'm trying to set up a vpn with pix 501 but short questions site. I managed to get that below, but I'm stuck now and do not know what could be the problem. Here's the debug output.
Any help is greatly appreciated on what could be the potential problem.
-AK
ISAKMP (0:0): sending of NAT - T vendor ID - rev 2 & 3
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:500
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
ISAKMP: 3DES-CBC encryption
ISAKMP: hash SHA
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: duration of life (basic) of 28800
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): load useful treatment vendor idISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
00
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): provider v6 code received xauth
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing another box of IOS!
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing a VPN3000 concentrator
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 0
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
00
Exchange OAK_MM
ISAKMP (0): processing ID payload. Message ID = 0
ISAKMP (0): HASH payload processing. Message ID = 0
ISAKMP (0): keep treatment alive: proposal = 32767/32767 sec., real = 3276/2 sec.ISAKMP (0): load useful treatment vendor id
ISAKMP (0): Peer Remote supports dead peer detection
ISAKMP (0): SA has been authenticated.
ISAKMP (0): start Quick Mode changes, 413131006:189fe0feIPSEC (key_e M - ID
(Display): had an event of the queue...
IPSec (spi_response): spi 0x3e9451fa graduation (1049907706) for SA
from 208.249.117.203 to 70.91.20.245 for prot 3to return to the State is IKMP_NO_ERROR
ISAKMP (0): send to notify INITIAL_CONTACT
ISAKMP (0): sending message 24578 NOTIFY 1 protocol
Peer VPN: ISAKMP: approved new addition: ip:208.249.117.203/500 Total VPN peer: 1
Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt is incremented to peers: 1 Total VPN
Peers: 1
crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
00
ISAKMP (0): processing DELETE payload. Message ID = 3425658127, spi size = 16
ISAKMP (0): delete SA: src 70.91.20.245 dst 208.249.117.203
to return to the State is IKMP_NO_ERR_NO_TRANS
ISADB: Reaper checking HIS 0xac149c, id_conn = 0 DELETE IT!Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt decremented to peers: 0 Total VPN
Peers: 1
Peer VPN: ISAKMP: deleted peer: ip:208.249.117.203/500 VPN peer Total: 0IPSEC (ke
y_engine): got an event from the queue.
IPSec (key_engine_delete_sas): rec would remove the ISAKMP notify
IPSec (key_engine_delete_sas): remove all SAs shared with 208.249.117.203
IPSec (key_engine): request timer shot: count = 2,.
local (identity) = 70.91.20.245, distance = 208.249.117.203.
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)Hello
Newspapers, I see you are using a VPN 3000 Concentrator as the remote vpn end point. Now, also of the debugs next section is interesting:
local (identity) = 70.91.20.245, distance = 208.249.117.203.
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)-Looks like our traffic interesting PIX and the hub are not mirrors of each other, and does not. Can you please paste the PIX here cryptographic access lists, so that I can analyze the entries.
-Also, please make sure that you have followed all the steps during the vpn configuration according to the following links:
If your PIX is running at version 7.x and more: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008064a06f.shtml
If your PIX is running version 6.3.x: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml
Once you check the config on PIX and concentrator, please provide me with the output of "sh cry isa his" and "sh cry ipsec his ' of the PIX. With this release, we can continue to troubleshoot if there is more questions.
Let me know if this can help,
See you soon,.
Christian V
-
Greetings,
I practice implementation of VPN and it seems to have fallen on a small issue that solution eludes me. Everything works in my current topology with the exception of a multi-site vpn. I have 3 ASA, which is outside the interface is connected via a switch. The inside interface is connected to a local area network that contains a workstation on each subnet. I'm trying to set up a solution where I can have all 3 ASA related between them via a VPN. The question I have is when I raise a single tunnel, scathing from a workstation behind the ASA, I can't set up a second tunnel scathing from a different network. To explain that better, here is an explanation:
ASA #1
outdoors: 10.0.1.1/24
inside: 192.168.0.1/24
workstation: 192.168.0.100
ASA #2
outside: 10.0.1.2/24
inside: 192.168.1.1/24
workstation: 192.168.1.100
ASA #3
outside: 10.0.1.3/24
inside: 192.168.2.1/24
workstation: 192.168.2.100
If I ping 192.168.0.100 192.168.1.100, the tunnel opens very well and I get answers. If I can try and ping 192.168.0.100 192.168.2.100, does not open the tunnel to 192.168.2.0. If I clear all its on ASA #1 and then ping 192.168.0.100 192.168.2.100, the tunnel opens very well and I get a response. Then I try and ping 192.168.0.100 192.168.1.100 and the same thing happens, no tunnel and no response. When I enabled logging on ASA #1 seems that it sends the ping for the different network on the tunnel open instead of opening a new tunnel to the correct network. Can someone tell me what is happening here and if I just missed something simple with routing? Or is it maybe a problem with VPN?
Craig,
You have default route badly configured on all the ASA. Here's what you have configured
ASA1
Route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
It's sendning the package for outside inside IP address. Here's what you need to do on the ASA
ASA1
No route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
Route outside 0.0.0.0 0.0.0.0 10.0.1.2
ASA2
No route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Route outside 0.0.0.0 0.0.0.0 10.0.1.1
ASA3
No route outside 0.0.0.0 0.0.0.0 192.168.2.1 1
Route outside 0.0.0.0 0.0.0.0 10.0.1.1
Also delete icmp access list crypto that you allowed to what IP is the same access list. IP covers both the ICMP.
Kindly let me know change default allows traffic.
Kind regards
Bad Boy
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Hello, I'm having a problem with my VPN configuration. I have two locations each with she is has a subnett. I have a VPN site-to site between the two locations. The site to site VPN is up and fully functional without any problem. Now if I'm away from work and to connect with the site A VPN client, I cannot ping or connect what either on site B. Or if I am connected to site B by a VPN I can't ping or connect what to site A.
I hope that makes sense, but I'll be happy to give more details on Setup if necessary.
I think that the command you need is:
same-security-traffic permit Intra-interface (not inter-interface)
The remote VPN and VPN site - to use the same outside interface, so this command allows VPN traffic out this interface pin
Sent by Cisco Support technique iPad App
-
Problem with Site-to-Site VPN. VPN tunnel is broken but can ping
OK, so I am trying to understand why I can't not only appears when I sh crypto isakmp his or sh crypto ipsec his. I did the basic to site vpn settings to another and I can't ping on both networks fine no problem. So, when I ping from one pc to the address 172.16.0.0 192.168.0.0 network network there is no problem at all because the pings are very well received. But when I go to sh crypto isakmp sa, there's simply nothing and I can't for the life of understand me why. I watched my sh run for both routers and all seems well, but I guess I could be overlooking something. I would really appreciate if someone could help me to diagnose this problem.
I've attached my plotter file of package and two routers use the binary password. I also have the sh run two routers also attached.
I'm not on any of the router 172.16.0.0/24 only 172.16.0.0/16 and I think that is the question.
In Crypto ACL you have on the router of branch:
!
S2S-VPN-TRAFFIC extended IP access list
Licensing ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.0.255
If it should not be:
!
S2S-VPN-TRAFFIC extended IP access list
Licensing ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.255.255
and coursed mirrored on the main router.
If this isn't the case, you are saying that some ping between 192.168.0.x and 172.16.0.x is going ok. Can you please indicate exactly that one? I could see that you have attached a package tracer, but I couldn't open it.
-
Hello
is it possible to install?
I have a pc and I want to connect to the Remote LAN.
PC (using vpn client) - vpn (internet)---> ROUTER1 - a vpn (MPLS network)---> ROUTER2---> SERVER site
How can I connect to a remote server? Is there an easy way?
I did the configuration of the vpn client (I can connect ROUTER1 and access a LAN via vpn with 192.168.1.x), but I can't connect to the server, even if I set the subnet (192.168.1.x) under the access list of site to site vpn (access list for traffic that must pass between ROUTER1 and ROUTER2).
Please advise! Thanks in advance.
Looks like I've not well explained.
On ROUTER1
===================
1 ACL VNC_acl is used to split tunnel, so you should include IP server_NET it NOT vpn IP pool.
2 ACL najavorbel is used to set the lan lan traffic between ROUTER1 and ROUTER2, 2 you should inlcude
IP 192.168.133.0 allow 0.0.0.255 0.0.0.255
You must change the crypto ROUTER2 ACL of the minor or the najavorbel of the ACL
The other way to is to the client VPN NAT IP to a local area network lan IP ROUTER1, in this way, you don't need any changes on ROUTER2. But I have to take a look at your configuration to make the suggestion.
-
Problems with site-to-site vpn with of the asa 2
I tried different ways so that this works, but failed. After 8 hours, I literally have a bad headache and have to step away for a minute. I realize I need to ping between the tunnels mentioned, but still can not to. can someone take a look and tell me where I have gone wrong? Im trying to configure a site to site vpn between:
ASA_A
external interface 5.179.17.66
inside the interface 10.1.1.1
ASA B
external interface 5.81.57.19
inside the 10.1.2.1 interface
Frist why do you have two DGs on box -
Route outside 0.0.0.0 0.0.0.0 5.179.121.65 1
Route outside 0.0.0.0 0.0.0.0 5.179.17.65 1
Attach the two end then it should work.
Thank you
Ajay
-
Site to site VPN, I need all internet traffic to exit the site.
I have 2 sites connected via a pair of SRX5308
A = 192.168.1.0/24
IP WAN = 1.1.1.1
B = 192.168.2.0/24
IP WAN = 2.2.2.2
Now what I need to do, is to have all traffic from B to go to the site one even traffic destined to the internet. That is, I need internet traffic out of our network with the IP 1.1.1.1, even if it is from the network B.
On my I have set up a route 1.1.1.1 of the ISP, then a value by default 0/0 to 192.168.1.1 it ASA knows how to get to the peer VPN is a more specific route, but sends everything above the tunnel, at the remote end which then hairpin of ASA routes internet outside its own WAN port traffic.
I can understand though not how to so the same thing on the pair of SRX5308 they either don't raise the tunnel or internet route to the local site address B.
Anyone have any ideas?
I need to do this because we are logging and monitoring of internet traffic to A site via tapping from upstream to various IDS solutions and will not (cannot) reproduce this to all our remote sites.
Thank you
Dave.
After some more thought and testing I came up with a workable solution to my own problem. I'll share it here in case it can help others.
(1) use the wizard at both ends to implement a normal VPN that connects the two segments of network 192.168.1.0 and 192.168.2.0
(2) go to site VPN - VPN policy remote router192.168.2.1 and click Edit
(a) disable Netbios
(b) select "None" from the drop-down list the remote IP address.
(c) to apply the change
3) go to the VPN-> VPN policy on the head end site (192.168.1.1) and click Edit
(a) disable Netbios
(b) select "None" from the drop-down list the local IP address
(c) to apply the change
Now all the traffic wil go down the VPN tunnel and exit to the internet on the site of head end. Hope this helps others with the same question.
-
Troubleshooting IPSec Site to Site VPN between ASA and 1841
Hi all
in the past I've implemented several VPN connections between the devices of the SAA. So I thought a site link between an ASA site and 1841 would be easier... But it seems I was mistaken.
I configured a VPN Site to Site, as it has been described in the Document ID: SDM 110198: IPsec Site to Site VPN between ASA/PIX and an example of IOS Router Configuration (I have not used SDM but CCP).
I have run the wizards on the ASA with ASDM and the current IOS version 15.1 1841, with CCP.
It seems to Phase 1 and 2 are coming although my ASA in ADSM reports (monitoring > VPN > VPN statistics > Sessions) a tunnel established with some of the Tx traffic but 0 Rx traffic),
On the ASA:
Output of the command: "sh crypto ipsec its peer 217.xx.yy.zz.
address of the peers: 217.86.154.120
Crypto map tag: VPN-OUTSIDE, seq num: 2, local addr: 62.aa.bb.ccaccess extensive list ip 192.168.37.0 outside_2_cryptomap_1 allow 255.255.255.0 172.20.2.0 255.255.255.0
local ident (addr, mask, prot, port): (LAN-A/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (LAN-G/255.255.255.0/0/0)
current_peer: 217.xx.yy.zz#pkts program: 400, #pkts encrypt: 400, #pkts digest: 400
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 400, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 62.aa.bb.cc, remote Start crypto. : 217.xx.yy.zz
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 39135054
current inbound SPI: B2E9E500SAS of the esp on arrival:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4374000/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
outgoing esp sas:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4373976/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001Output of the command: "sh crypto isakmp his."
HIS active: 4
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 4IKE Peer: 217.xx.yy.zz
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVEOn the 1841
1841 crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
217.86.154.120 62.153.156.163 QM_IDLE 1002 ACTIVE1841 crypto ipsec #sh its
Interface: Dialer1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
Interface: virtual Network1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
It seems that the routing on the 1841 is working properly as I can tear down the tunnel and relaunch in scathing a host on the network of 1841, but not vice versa.
Trounleshoot VPN of the 1841 report shows a message like "the following sources are forwarded through the interface card crypto. (172.20.2.0 1) go to "Configure-> routing" and correct the routing table.
I have not found an error on the 1841 config so if one of the guys reading this thread has an idea I appreciate highly suspicion!
It's the running of the 1841 configuration
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host name 1841
!
boot-start-marker
start the system flash c1841-adventerprisek9 - mz.151 - 1.T.bin
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
!
AAA - the id of the joint session
!
iomem 20 memory size
clock timezone PCTime 1
PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
dot11 syslog
IP source-route
!
No dhcp use connected vrf ip
!
IP cef
no ip bootp Server
IP domain name test
name of the IP-server 194.25.2.129
name of the IP-server 194.25.2.130
name of the IP-server 194.25.2.131
name of the IP-server 194.25.2.132
name of the IP-server 194.25.2.133
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
object-group network phone
VoIP phone description
Home 172.20.2.50
Home 172.20.2.51
!
redundancy
!
!
controller LAN 0/0/0
atm mode
Annex symmetrical shdsl DSL-mode B
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 62.aa.bb.cc
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to62.aa.bb.cc
the value of 62.aa.bb.cc peer
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address 100
!
!
!
interface FastEthernet0/0
DMZ description $ FW_OUTSIDE$
10.10.10.254 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
Description $ETH - LAN$ $FW_INSIDE$
IP 172.20.2.254 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
No atm ilmi-keepalive
!
point-to-point interface ATM0/0/0.1
PVC 1/32
PPPoE-client dial-pool-number 1
!
!
interface Dialer1
Description $FW_OUTSIDE$
the negotiated IP address
IP mtu 1452
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 2
PPP authentication chap callin pap
PPP chap hostname xxxxxxx
PPP chap password 7 xxxxxxx8
PPP pap sent-name of user password xxxxxxx xxxxxxx 7
map SDM_CMAP_1 crypto
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
!
!
The dns server IP
IP nat inside source static tcp 10.10.10.1 808 interface Dialer1 80
IP nat inside source static tcp 10.10.10.1 25 25 Dialer1 interface
IP nat inside source overload map route SDM_RMAP_1 interface Dialer1
IP nat inside source overload map route SDM_RMAP_2 interface Dialer1
IP route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
logging trap notifications
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 172.20.2.0 0.0.0.255
Note access-list category 2 CCP_ACL = 2
access-list 2 allow 10.10.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
Note access-list 100 IPSec rule
access-list 100 permit ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
Note CCP_ACL the access list 101 = 2 category
Note access-list 101 IPSec rule
access-list 101 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 101 permit ip 172.20.2.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 2
Note access-list 102 IPSec rule
access-list 102 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
!!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
allowed SDM_RMAP_2 1 route map
corresponds to the IP 102
!
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
length 0
transport input telnet ssh
!
Scheduler allocate 20000 1000
NTP-Calendar Update
NTP 172.20.2.250 Server prefer
endAs I mentioned previously: suspicion is much appreciated!
Best regards
Joerg
Joerg,
ASA receives not all VPN packages because IOS does not send anything.
Try to send packets to the 1841 LAN to LAN of the ASA and see is the "sh cry ips its" on the 1841 increments the encrypted packets (there not)
The problem seems so on the side of the router.
I think that is a routing problem, but you only have one default gateway (no other channels on the router).
The ACL 100 is set to encrypt the traffic between the two subnets.
It seems that the ACL 101 is also bypassing NAT for VPN traffic.
Follow these steps:
Try running traffic of LAN router inside IP (source of ping 192.168.37.x 172.20.2.254) and see if the packages are not through the translation and obtaining encrypted.
I would also like to delete 100 ACL from the inside interface on the router because it is used for the VPN. You can create an another ACL to apply to the interface.
Federico.
-
I have a couple of site to site VPN working properly on an ASA 5515. Don't know what is on the other side, as I haven't seen them. I configured a SSL vpn for remote users who must be able to access resources on remote sites. I got access to the network of site without any problems and and have added the range of IP addresses for remote users to links from site to site, but I am unable to connect. Anyone who has this performance, it would be greatly appreciated if you can help.
Hi mbluemel,
You need to configure the remote side to allow traffic from the remote side for SSL VPN users.
This list of documents the measures taken to achieve this: -.http://www.petenetlive.com/kb/article/0000040.htm
For more information: -.
http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
question links to site 2 site VPN with authentication cert
Currently we are accumulate tunnel site-2-site VPN with our client. Usually we use pre-shared key as authentication with other customers without any problems, but it must use authentication cert with her this time. But the question is that our CA is different from theirs. I tried a few times, but he failed. Is it someone please let me know that he must have the certificate issued by the same certification authority to create the VPN tunnel?
Thank you very much!
Hello
You can read this document to get a simple example of setting up a VPN S2S using certificates on an ASA:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080aa5be1.shtml
Basically the sides must have the same certification authority and If there is an intermediate certificate that must be installed also. The ASA 2 will generate a CSR (certificate access code request), now then PKI will create a certificate for both parties, commonly called "certificate of identity".
Please pass a note and mark as he corrected the post helpful!
David Castro,
Kind regards
-
Site to site VPN works only on Cisco 881
I have 2 problems with a cisco 881. The first problem is that Vlan2 (192.168.5.xx) cannot access the internet on the outside. But I know that the router has internet, because I can ping the external ip address. The 2nd problem is that I have a set of site to another upward, but when I test the Site to site I get this error:
destination of traffic of the tunnel must be channelled through the crypto map interface. The destination following (s) doesn't have a routing entry in the routing table
192.168.2.0I copied the config form this router from another cisco 881 work, where everything works. The only difference is that this router needs a site to site vpn connection.
My question is how I can get internet on vlan2 and who can I solve the connection to site to site.
Here's the running configuration:
Building configuration...
Current configuration: 12698 bytes
!
version 15.3
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname Cisco_881
!
boot-start-marker
boot-end-marker
!
AQM-registry-fnf
!
logging buffered 51200 warnings
!
AAA new-model
!
!
AAA authentication login default local
AAA authorization exec default local
AAA authorization network default local
!
!
!
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-1151531093
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1151531093
revocation checking no
rsakeypair TP-self-signed-1151531093
!
Crypto pki trustpoint TP-self-signed-2011286623
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2011286623
revocation checking no
rsakeypair TP-self-signed-2011286623
!
!
TP-self-signed-1151531093 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31313531 35333130 6174652D 3933301E 170 3135 30343031 31363230
34315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 31353135 65642D
33313039 3330819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100AC6E E7FA8AFD 9D4E206C 2B23DFC1 990AFDB3 98CD84A7 37697253 A7EF2520
0C45190E 298B6E9F E2711580 80DCFBFB 05A6A0BA 347B960B D9DA17FC B1543B9D
FBC048F3 063EBBC5 02391432 F0232A73 EAC7278E 8CB83005 D13A1D47 BEF18198
A 547469, 2 F65ED0E6 249BF517 1E74117D C94BE542 46EE487D A3843F12 364639B 4
0B 090203 010001 HAS 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 147996F4 3E6D0EE2 2D9065BB D726137C 2DF42ABE 01301D 06
03551D0E 04160414 7996F43E 6D0EE22D 9065BBD7 26137C2D F42ABE01 300 D 0609
2A 864886 F70D0101 8181002A 05050003 677B9BE6 CB60D188 73227C4B 2DC33101
BD448017 EDEF0296 FF7438A3 4C46519B 144C775F 1429CF06 7DB29F2D EB16EE75
22100B 63 0D75511A 98DC57DC EF87BED2 1C1635C8 B5352706 3963037A 4E9B739A
3A1EC9BE 8431BD70 116D3B31 E4A2AC4C 0F934B3F 196AF829 AD537005 6935B 451
EB31DB3F A9BA6D70 65B70D19 D00158
quit smoking
TP-self-signed-2011286623 crypto pki certificate chain
no ip source route
!
!
!
!!
DHCP excluded-address IP 10.10.10.1
DHCP excluded-address IP 192.168.5.1 192.168.5.49
DHCP excluded-address IP 192.168.5.150 192.168.5.254
!
DHCP IP CCP-pool
import all
Network 10.10.10.0 255.255.255.248
default router 10.10.10.1
Rental 2 0
!
IP dhcp Internet pool
network 192.168.5.0 255.255.255.0
router by default - 192.168.5.254
DNS-Server 64.59.135.133 64.59.128.120
lease 6 0
!
!
!
no ip domain search
"yourdomain.com" of the IP domain name
name of the IP-Server 64.59.135.133
name of the IP-Server 64.59.128.120
IP cef
No ipv6 cef
!
!
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
udi pid C881-K9 sn FTX18438503 standard license
!
!
Archives
The config log
hidekeys
username * privilege 15 secret 5 $1$IBY.$X5/iqYy47a5vAWWuG4/Oa/
username * secret 5 $1$ 17 ST$ QzJMvQnZ9Q.1y7u0rYXFa0
username * secret 5 $1$ L4W9$ zBKpawZ3i5nXxwyS9H6Lf1
!
!
!
!
!
no passive ftp ip
!
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
!
crypto ISAKMP policy 2
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 208.98.212.xx
!
Configuration group crypto isakmp MPE client
key *.
pool VPN_IP_POOL
ACL 100
include-local-lan
10 Max-users
netmask 255.255.255.0
banner ^ practive entered the fieldThis area is reserved for administrators of control systems.
If you are here by mistake, please disconnect immediately.
You have full access to 192.168.125.0 / 0.0.0.255
Support on continue to start your session. ^ C
!
Configuration group customer crypto isakmp PALL
key *.
pool VPN_IP_POOL_PALL
ACL 101
include-local-lan
Max - 1 users
netmask 255.255.255.0
banner ^ practive entered the fieldThis area is limited to the PALL access only.
If you are here by mistake, please disconnect immediately.
You have full access to 192.168.125.0 / 0.0.0.255
Support on continue to start your session. ^ C
ISAKMP crypto profile vpn_isakmp_profile
game of identity EMT group
client authentication list default
Default ISAKMP authorization list
client configuration address respond
virtual-model 1
ISAKMP crypto profile vpn_isakmp_profile_2
match of group identity PALL
client authentication list default
Default ISAKMP authorization list
client configuration address respond
virtual-model 2
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac VPN_TRANSFORM
tunnel mode
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
Profile of crypto ipsec VPN_PROFILE_MPE
Set the security association idle time 3600
game of transformation-VPN_TRANSFORM
vpn_isakmp_profile Set isakmp-profile
!
Profile of crypto ipsec VPN_PROFILE_PALL
Set the security association idle time 1800
game of transformation-VPN_TRANSFORM
vpn_isakmp_profile_2 Set isakmp-profile
!
!
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to208.98.212.xx
the value of 208.98.212.xx peer
game of transformation-ESP-3DES-SHA
match address 102
!
!
!
!
!
!
interface Loopback0
IP 192.168.40.254 255.255.255.0
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
switchport access vlan 2
no ip address
!
interface FastEthernet3
switchport access vlan 2
no ip address
!
interface FastEthernet4
IP address 208.98.213.xx 255.255.255.224
IP access-group 111 to
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
map SDM_CMAP_1 crypto
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel VPN_PROFILE_MPE ipsec protection profile
!
tunnel type of interface virtual-Template2
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel VPN_PROFILE_PALL ipsec protection profile
!
interface Vlan1
Description of control network
IP 192.168.125.254 255.255.255.0
IP access-group CONTROL_IN in
IP access-group out CONTROL_OUT
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
interface Vlan2
Description Internet network
IP 192.168.5.254 255.255.255.0
IP access-group INTERNET_IN in
IP access-group out INTERNET_OUT
IP nat inside
IP virtual-reassembly in
!
local IP VPN_IP_POOL 192.168.40.100 pool 192.168.40.150
local IP VPN_IP_POOL_PALL 192.168.40.151 pool 192.168.40.152
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source static tcp 192.168.125.2 25000 25000 FastEthernet4 interface
IP nat inside source overload map route SDM_RMAP_1 interface FastEthernet4
IP route 0.0.0.0 0.0.0.0 FastEthernet4 permanent 208.98.236.xx
!
CONTROL_IN extended IP access list
Note the access control
Note the category CCP_ACL = 17
allow any host 192.168.125.254 eq non500-isakmp udp
allow any host 192.168.125.254 eq isakmp udp
allow any host 192.168.125.254 esp
allow any host 192.168.125.254 ahp
IP 192.168.125.0 allow 0.0.0.255 192.168.125.0 0.0.0.255
Note the VPN access
IP 192.168.125.0 allow 0.0.0.255 192.168.40.0 0.0.0.255
Note Access VNC
permit tcp host 192.168.125.2 eq 25000 one
Comment by e-mail to WIN911
permit tcp host 192.168.125.2 any eq smtp
Note DNS traffic
permit udp host 192.168.125.2 host 64.59.135.133 eq field
permit udp host 192.168.125.2 host 64.59.128.120 eq field
Note Everything Else block
refuse an entire ip
CONTROL_OUT extended IP access list
Note the access control
IP 192.168.125.0 allow 0.0.0.255 192.168.125.0 0.0.0.255
Note the VPN access
ip permit 192.168.40.0 0.0.0.255 192.168.125.0 0.0.0.255
Note Access VNC
allow any host 192.168.125.2 eq 25000 tcp
Comment by e-mail to WIN911
allow any host 192.168.125.2 eq smtp tcp
Note DNS responses
allowed from any host domain eq 192.168.125.2 udp
Note deny all other traffic
refuse an entire ip
INTERNET_IN extended IP access list
Note Access VNC on VLAN
allow any host 192.168.125.2 eq 25000 tcp
Note block all other controls and VPN
deny ip any 192.168.125.0 0.0.0.255
deny ip any 192.168.40.0 0.0.0.255
Note leave all other traffic
allow an ip
INTERNET_OUT extended IP access list
Note a complete outbound Internet access
allow an ip
WAN_IN extended IP access list
allow an ip host 207.229.14.xx
Note PERMIT ESTABLISHED TCP connections
allow any tcp smtp created everything eq
Note ALLOW of DOMAIN CONNECTIONS
permit udp host 64.59.135.133 eq field all
permit udp host 64.59.128.120 eq field all
Note ALLOW ICMP WARNING RETURNS
allow all all unreachable icmp
permit any any icmp parameter problem
allow icmp all a package-too-big
allow a whole icmp administratively prohibited
permit icmp any any source-quench
allow icmp all once exceed
refuse a whole icmp
allow an ip
!
auto discovering IP sla
not run cdp
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 103
!
access-list 1 remark out to WAN routing
Note CCP_ACL the access list 1 = 16 category
access-list 1 permit 192.168.125.2
access-list 1 permit 192.168.5.0 0.0.0.255
Note access-list 23 SSH and HTTP access permissions
access-list 23 permit 192.168.125.0 0.0.0.255
access-list 23 permit 192.168.40.0 0.0.0.255
access-list 23 allow one
Note access-list 100 VPN traffic
access-list 100 permit ip 192.168.125.0 0.0.0.255 any
access-list 100 permit ip 192.168.40.0 0.0.0.255 any
Note access-list 101 for PALL VPN traffic
access-list 101 permit ip 192.168.125.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 4
Note access-list 102 IPSec rule
access-list 102 permit ip 192.168.5.0 0.0.0.255 192.168.2.0 0.0.1.255
Note access-list 103 CCP_ACL category = 2
Note access-list 103 IPSec rule
access-list 103 deny ip 192.168.5.0 0.0.0.255 192.168.2.0 0.0.1.255
access-list 103 allow ip 192.168.5.0 0.0.0.255 any
access-list 103 allow the host ip 192.168.125.2 all
Note access-list 111 CCP_ACL category = 17
access-list 111 permit udp any host 208.98.213.xx eq non500-isakmp
access-list 111 permit udp any host 208.98.213.xx eq isakmp
access-list 111 allow esp any host 208.98.213.xx
access-list 111 allow ahp any host 208.98.213.xx
Note access-list 111 IPSec rule
access-list 111 permit ip 192.168.2.0 0.0.1.255 192.168.5.0 0.0.0.255
Note access-list 111 IPSec rule
access-list 111 permit ip 192.168.2.0 0.0.1.255 192.168.4.0 0.0.1.255
access-list 111 permit udp host 208.98.212.xx host 208.98.213.xx eq non500-isakmp
access-list 111 permit udp host 208.92.12.xx host 208.92.13.xx eq isakmp
access-list 111 allow esp host 208.92.12.xx host 208.92.13.xx
access-list 111 allow ahp host 208.92.12.xx host 208.92.13.xx
access-list 111 permit icmp any host 208.92.13.xx
access-list 111 permit tcp any host 208.92.13.xx eq 25000
access-list 111 permit tcp any host 208.92.13.xx eq 22
access-list 111 permit tcp any host 208.92.13.xx eq telnet
access-list 111 permit tcp any host 208.92.13.xx eq www
!
!
!
control plan
!
!
!
MGCP behavior considered range tgcp only
MGCP comedia-role behavior no
disable the behavior MGCP comedia-check-media-src
disable the behavior of MGCP comedia-sdp-force
!
profile MGCP default
!
!
!
!
exec banner ^ C
% Warning of password expiration.
-----------------------------------------------------------------------Unplug IMMEDIATELY if you are not an authorized user
^ C
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 23 in
password *.
transport input telnet ssh
transportation out all
line vty 5 15
access-class 160 in
password *.
transport of entry all
transportation out all
!
max-task-time 5000 Planner
Scheduler allocate 20000 1000
!
endThank you.
It seems that DNS has failed, because it is indeed happened to internet, but it does not work when internet DNS resolution.
Go ahead and try to ping this 157.166.226.25, and it's on the browser http://157.166.226.25/, CNN.com. Let's try those. Also just in case where to configure a DNS SERVER on your router.
- http://www.cisco.com/c/en/us/support/docs/ip/domain-name-system-dns/2418...
Disable any ZBF just in case.
David Castro,
Kind regards
Maybe you are looking for
-
Had earlier bookmarks, came later just went. Way to recover them?
I had my favorites earlier in the day I shut down my computer. Came back a few hours later on my computer and it is gone. Bookmarks, sites, everything. Is it possible to recover?
-
Satellite 5005-S504 - peripheral USB are not recognized
Hello with my laptop older, one Satellite 5005-S504, I recently problems with the USB ports. None of the three ports detects a USB device. Device Manager does not indicate a problem on the host controller or root hub. I am running Windows XP, SP3 and
-
Satellite M40: message: can not play because the DVD decoder is not installed
not serious... I am back... I did a little reading and tried to read another cd in the drive and the message came to say "can't play because the dvd decoder is not installed, so I guess that's the problem because I have a recovery * DVD *.» Anyone kn
-
Change boot device hp Pavilion
I have a HP Pavilion a1200y desktop computer and try to reinstall Windows. Trying to change the boot device order so my DVD first boots, I find that there is just no devices not listed in the BIOS under boot order... not even my 'C' drive How can I
-
Windows Vista reinstall stopped at "continue installation".
I'm trying to reinstall Windows Vista Home Premium on a Dell Inspiron 1720. I get through the steps and it restarts several times, but when I get to "Continue Installation... "nothing seems to happen. I tried several times to reinstall but still st