Problem on site to site and between router vpn client series 2,800

Similar Questions

• Routing problem between the VPN Client and the router's Ethernet device

  Hello

  I have a Cisco 1721 in a test environment.

  A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).

  The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.

  The configuration was inspired form the sample Configuration

  "Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"

  and the output of the ConfigMaker configuration.

  Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem

  side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).

  Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive

  (customer has a correct route and return ICMP packets to the router).

  The question now is:

  How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?

  conf of the router is attached - hope that's not too...

  Thanks & cordially

  Thomas Schmidt

  -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

  !

  version 12.2

  horodateurs service debug uptime

  Log service timestamps uptime

  encryption password service

  !

  !

  host name * moderator edit *.

  !

  enable secret 5 * moderator edit *.

  !

  !

  AAA new-model

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  ! only for the test...

  !

  username cisco password 0 * moderator edit *.

  !

  IP subnet zero

  !

  audit of IP notify Journal

  Max-events of po verification IP 100

  !

  crypto ISAKMP policy 3

  3des encryption

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  pool ippool

  !

  ! We do not want to divide the tunnel

  ! ACL 108

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  interface Ethernet0

  no downtime

  Description connected to VPN

  IP 192.168.1.1 255.255.255.0

  full-duplex

  IP access-group 101 in

  IP access-group 101 out

  KeepAlive 10

  No cdp enable

  !

  interface Ethernet1

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  IP access-group 101 in

  IP access-group 101 out

  full-duplex

  KeepAlive 10

  No cdp enable

  !

  interface FastEthernet0

  no downtime

  Description connected to the Internet

  IP 172.16.12.20 255.255.224.0

  automatic speed

  KeepAlive 10

  No cdp enable

  !

  ! This access group is also only for test cases!

  !

  no access list 101

  access list 101 ip allow a whole

  !

  local pool IP 192.168.10.1 ippool 192.168.10.10

  IP classless

  IP route 0.0.0.0 0.0.0.0 172.16.12.20

  enable IP pim Bennett

  !

  Line con 0

  exec-timeout 0 0

  password 7 * edit from moderator *.

  line to 0

  line vty 0 4

  !

  end

  ^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-

  Thomas,

  Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.

  Kurtis Durrett

• Between the VPN Client and VPN from Site to Site

  Looking for an example of ASA 8.0 configuration allowing traffic between a Cisco VPN client host and destination of remote access connected via LAN/Site-to-Site tunnel.  The remote access client and the tunnel site-to-site terminate on the same device of the SAA.

  Thanks in advance.

  -Rey

  Hi Rey,

  Here is an example of a config for what you are looking for.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

  I hope this helps.

  PS: This uses GANYMEDE + for authentication, you can replace it with your authentication method.

  Kind regards

  Assia

• the same SSID used on 3 sites and even vlan assignment client IP?

  our 5508 controller and LW APs to IP phone 7925 G wireless

  Controller is installed at A site and there are APs and wireless to the site B and C as well.

  1. can I use the same SSID for the three sites for cordless phones? or having to use separate SSID 3?

  2. If I use the same SSID, can I associate a subnet for example 10.10.131.0/24 for the 3 sites Cordless IP phones? (our UCM Cisco is fine with that)

  3. If I use 3 distinct SSID, must I give three subnets for IP phones on three sites?

  Thanks for the help!

  Eric

  Yes you are right... but its recommended to configure HREAP for remote offices... so that the failure will be less compared to the AP in local mode...

  Let me know if that answers your question...

  Concerning

  Surendra

• VPN site to site access via a VPN client

  Hi all

  From our headquarters, we use a vpn site-to-site to connect to another site and it works great.

  We have just configured the VPN client on our headquarters, remote VPN user can access the LAN in the seat.

  We need the remote user can also access the LAN on the other site, but it does not work.

  The site to site VPN and VPN client are configured on the same device, using even outside the interface.

  Vpn client address pool is already included in the address that is allowed to go through the site to site VPN.

  We would like to know if it is possible to access the site to site VPN, connecting to the VPN client and when the architecture is as above?

  in the case where we use different devices and different internet connection for client VPN and site to site VPN, we can access the other site by the remote user VPN LAN?

  Kind regards

  Since you already have 10.13.0.0/16 in your site to site crypto ACL, which already includes the pool vpn so you need not configure it specifically.

  You are missing the following command:

  permit same-security-traffic intra-interface

  ACL split tunnel should be standard ACL as follows:

  access list ACL-CL-VPN allow 10.13.0.0 255.255.0.0

  access list ACL-CL-VPN allow 10.14.0.0 255.255.248.0

• Problems connecting to help connect any and the Ipsec VPN Client

  I have problems connecting with the VPN client connect no matter what.  I can connect with the Ipsec VPN client in Windows 7 32 bit.

  Here is my latest config running.

  Thank you for taking the time to read this.

  passwd encrypted W/KqlBn3sSTvaD0T

  no names

  name 192.168.1.117 kylewooddesk kyle description

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  domain wood.local

  permit same-security-traffic intra-interface

  object-group service rdp tcp

  access rdp Description

  EQ port 3389 object

  outside_access_in list extended access permit tcp any interface outside eq 3389

  outside_access_in list extended access permit tcp any interface outside eq 8080

  outside_access_in list extended access permit tcp any interface outside eq 3334

  outside_access_in to access extended list ip 192.168.5.0 allow 255.255.255.240 192.168.1.0 255.255.255.0

  woodgroup_splitTunnelAcl list standard access allowed host 192.168.1.117

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  outside_access_in_1 list extended access permit tcp any host 192.168.1.117 eq 3389

  woodgroup_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  inside_nat0_outbound_1 to access extended list ip 192.168.5.0 allow 255.255.255.240 all

  inside_test list extended access permit icmp any host 192.168.1.117

  no pager

  Enable logging

  timestamp of the record

  asdm of logging of information

  Debugging trace record

  Within 1500 MTU

  Outside 1500 MTU

  mask pool local Kyle 192.168.5.1 - 192.168.5.10 IP 255.255.255.0

  IP local pool vpnpool 192.168.1.220 - 192.168.1.230

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 631.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (inside) 1 interface

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 0.0.0.0 0.0.0.0

  public static interface 3389 (indoor, outdoor) 192.168.1.117 tcp 3389 netmask 255.255.255.255 dns

  public static tcp (indoor, outdoor) interface 8080 192.168.1.117 8080 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 3334 192.168.1.86 3334 netmask 255.255.255.255

  static (inside, upside down) 75.65.238.40 192.168.1.117 netmask 255.255.255.255

  Access-group outside_access_in in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  the files enable exploration

  activate the entry in the file

  enable http proxy

  Enable URL-entry

  SVC request no svc default

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.168.1.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd dns 8.8.8.8 8.8.4.4

  dhcpd lease 3000

  !

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  host of statistical threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

  enable SVC

  internal sslwood group policy

  attributes of the strategy of group sslwood

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  internal group woodgroup strategy

  woodgroup group policy attributes

  value of server DNS 8.8.8.8 8.8.4.4

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list woodgroup_splitTunnelAcl_1

  mrkylewood encrypted Q4339wmn1ourxj9X privilege 15 password username

  username mrkylewood attributes

  VPN-group-policy sslwood

  VPN - connections 3

  VPN-tunnel-Protocol svc webvpn

  value of group-lock sslwood

  WebVPN

  SVC request no webvpn default

  tunnel-group woodgroup type remote access

  tunnel-group woodgroup General attributes

  address pool Kyle

  Group Policy - by default-woodgroup

  tunnel-group woodgroup ipsec-attributes

  pre-shared key *.

  type tunnel-group sslwood remote access

  tunnel-group sslwood General-attributes

  address pool Kyle

  authentication-server-group (inside) LOCAL

  authentication-server-group (outside LOCAL)

  Group Policy - by default-sslwood

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  Review the ip options

  type of policy-card inspect dns MY_DNS_INSPECT_MAP

  parameters

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  http https://tools.cisco.com/its/service/...es/DDCEService destination address

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:6fa8db79bcf695080cbdc1159b409360

  : end

  asawood (config) #.

  You also need to add the following:

  WebVPN

  tunnel-group-list activate

  output

  tunnel-group sslwood webvpn-attributes

  activation of the Group sslwood alias

  Let us know if it works.

• IOS router VPN client

  Hi all

  I have 2 sites connected through a VPN between 2 IOS routers.

  I have also some customers switched that need to connect on the inside network via a VPN with one of the routers.

  The VPN client software is enough or should I take into account the other components (for example an AAA for Xauth server)?

  Someone at - it an example configuration for the router IOS?

  Thank you

  If you more security, you can use the aaa server:

  http://www.cisco.com/warp/public/707/ios_usr_rad.html .

  You can also perform local authentication on the router:

  http://www.cisco.com/warp/public/471/ios-unity.html .

  Kind regards

  Eric

• Cisco VPN Client and Windows XP VPN Client IPSec to ASA

  I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.

  PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?

  Config is:

  !

  interface GigabitEthernet0/2.30

  Description remote access

  VLAN 30

  nameif remote access

  security-level 0

  IP 85.*. *. 1 255.255.255.0

  !

  access-list 110 scope ip allow a whole

  NAT list extended access permit tcp any host 10.254.17.10 eq ssh

  NAT list extended access permit tcp any host 10.254.17.26 eq ssh

  access-list extended ip allowed any one sheep

  access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh

  sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0

  tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0

  flow-export destination inside-Bct 192.168.1.27 9996

  IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0

  ARP timeout 14400

  global (outside-Baku) 1 interface

  global (outside-Ganja) interface 2

  NAT (inside-Bct) 0 access-list sheep-vpn

  NAT (inside-Bct) 1 access list nat

  NAT (inside-Bct) 2-nat-ganja access list

  Access-group rdp on interface outside-Ganja

  !

  Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2

  Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1

  Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1

  Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1

  Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1

  Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1

  Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1

  Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1

  Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1

  dynamic-access-policy-registration DfltAccessPolicy

  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

  Crypto ipsec transform-set newset aes - esp esp-md5-hmac

  Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans

  Crypto ipsec transform-set vpnclienttrans transport mode

  Crypto ipsec transform-set esp-3des esp-md5-hmac raccess

  life crypto ipsec security association seconds 214748364

  Crypto ipsec kilobytes of life security-association 214748364

  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

  vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1

  card crypto interface for remote access vpnclientmap

  crypto isakmp identity address

  ISAKMP crypto enable vpntest

  ISAKMP crypto enable outside-Baku

  ISAKMP crypto enable outside-Ganja

  crypto ISAKMP enable remote access

  ISAKMP crypto enable Interior-Bct

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  No encryption isakmp nat-traversal

  No vpn-addr-assign aaa

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.192 outside Baku

  SSH 10.254.17.26 255.255.255.255 outside Baku

  SSH 10.254.17.18 255.255.255.255 outside Baku

  SSH 10.254.17.10 255.255.255.255 outside Baku

  SSH 10.254.17.26 255.255.255.255 outside-Ganja

  SSH 10.254.17.18 255.255.255.255 outside-Ganja

  SSH 10.254.17.10 255.255.255.255 outside-Ganja

  SSH 192.168.1.0 255.255.255.192 Interior-Bct

  internal vpn group policy

  attributes of vpn group policy

  value of DNS-server 192.168.1.3

  Protocol-tunnel-VPN IPSec l2tp ipsec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunnel

  BCT.AZ value by default-field

  attributes global-tunnel-group DefaultRAGroup

  raccess address pool

  Group-RADIUS authentication server

  Group Policy - by default-vpn

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared-key *.

  Hello

  For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.

  Please see configuration below:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  or

  http://tinyurl.com/5t67hd

  Please see the section of tunnel-group config of the SAA.

  There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.

  So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.

  Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.

  "crypto isakmp nat-traversal.

  Thirdly, change the transformation of the value

  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

  Let me know the result.

  Thank you

  Gilbert

• Need help configuration IOS IPsec to enable communication between the VPN client

  Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".

  The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.

  Thanks in advance...

  Hello

  Try this: -.

  local pool IP 192.168.1.1 ippool 192.168.1.5

  access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit 10.10.10.0 0.0.0.255

  < lan="" behind="" the="">

  ISAKMP crypto client configuration group vpnclient

  key cisco123

  ACL 1< binding="" the="" acl="">

  !

  --------Done-------------

  If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had

  Assuming that the NAT of your router is

  overload of IP nat inside source list 111 interface FastEthernet1/0

  !

  ! - The access list is used to specify which traffic

  ! - must be translated to the outside Internet.

  access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

  Above two statements are exempt from nat traffic.

  access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">

  I would like to know if it worked for you.

  Concerning

  M

• RV180 and Cisco IPSec VPN client

  Hi NetPro,

  RV180 router supports VPN client using the regular Cisco VPN client connections?

  Data sheet says it works with client QuickVPN. If the regular non-Quick client is not supported, both clients can coexist (= be installed simultaneously) on the same PC?

  Is supported customer QuickVPN split tunneling?

  Thank you!

  Lubomir

  Lubomir Hello,

  The RV180 currently supports QuickVPN and PPTP VPN connections. It also has the IPSec tunnel as well, but it does not support the Cisco VPN client.

  I saw a question have Cisco VPN and the QuickVPN installed on the same computer.

  The QuickVPN client supports only split tunneling.

  I hope that answers your questions.

• IOS router VPN Client (easy VPN) IPsec with Anyconnect

  Hello

  I would like to set up my router IOS IPsec VPN Client and connect with any connect.
  Is it possible to configure an IPSec and SSL VPN Client on IOS router? I use for example a 1841.

  It would be perfect to give the user the choice of SSL or IPSec protocol. And the user needs that the Anyconnect Client.

  I think it's possible with a Cisco ASA. But I can also do this with an IOS router?

  Please let me know how if this is possible.

  Also is it true that the IOS routers are not affected to hear bug bleed? SSL VPN and SSL VPN with Anyconnect page is also save?

  http://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CIS...

  But I am in any way interested in using IPSec and SSL VPN on a router IOS...

  It's true - CCP does not yet offer the options to configure a VPN IPsec with IKEv2.

  The configuration guide (here) offers detailed advice and includes examples of configuration.

• Cisco VPN router VPN client commercial provider

  Hello

  IM new Cisco VPN technology so please forgive my ignorance.

  I am trying to connect my router to a comercial that support IPSec VPN provider gave me only that here the server ip, user name and password Secret.

  With this information, that I can, for example, to connect with an iPhone using the monofamille in Cisco's VPN IPSec.

  My question is how I put this up directly on a cisco router, or using CCP or config?

  Thanks in advance for all the help/pointers

  with the info given, there are the following config:

  Crypto ipsec VPN ezvpn client
  connect auto
  Astrill key way2stars group
  client mode
  Peer 1.2.3.4
  Astrill-email Astrill-password username password

  Sent by Cisco Support technique iPad App

• Can not pass traffic from the VPN client to remote VPN site to site

  Hello

  I can't get the traffic flowing between my VPN clients and my remote site-to-site VPN, I did step by step in this link:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

  my firewall says that the package is abandoned by statefull inspection.

  But this should be the command "same-security-traffic..." "this problem must be resolved

  % ASA-6-302020: built ICMP incoming connections for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1

  % ASA-6-302020: built outgoing ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0

  % ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1

  % ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0

  Is it all what you might think that I'm missing?

  Best regards

  Erik

  Erik,

  Please check it out because no decaps means the ASA does not what it is the other side of the tunnel.

  If you send traffic and you will see the crypt increment... but nothing in return... 99% sure that the problem is at the other end.

  Federico.

• QoS and routing VPN IPSEC protocols

  Hello world

  You must confirm if the QOS is usable on IPSEC Site to site VPN?

  IPSEC VPN it can also participate in routing protocols.

  Example of

  An address 192.168.10.1 site source

  B Source 192.168.10.2 site address

  Now for Site A to Site B IPSEC to join a way is that we can use our ISP as static IP address

  Site has

  192.168.10.2 255.255.255.0 address 10.x.x.x ISP

  Using routing protocols

  Is it possible to use OSPF between two sites and advertise routes in OSPF?

  Will they see each other as ospf neis?

  Thank you

  MAhesh

  Hello Manu,

  Yes, we can do,

  Let me provide you with the following information:

  On the quality of service

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008080dfa7.shtml

  On OSPF

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtm

• Split of static traffic between the VPN and NAT

  Hi all

  We have a VPN from Site to Site that secures all traffic to and from 10.160.8.0/24 to/from 10.0.0.0/8.  It's for everything - including Internet traffic.  However, there is one exception (of course)...

  The part that I can't make it work is if traffic comes from the VPN (10.0.0.0/8) of 10.160.8.5 (on 80 or 443), then the return traffic must go back through the VPN.  BUT, if traffic 80 or 443 comes from anywhere else (Internet via X.X.X.X which translates to 10.160.8.5), so there need to be translated réécrirait Internet via Gig2.

  I have the following Setup (tried to have just the neccessarry lines)...

  interface GigabitEthernet2

  address IP Y.Y.Y.Y 255.255.255.0! the X.X.X.X and Y.Y.Y.Y are in the same subnet

  address IP X.X.X.X 255.255.255.0 secondary

  NAT outside IP

  card crypto ipsec-map-S2S

  interface GigabitEthernet4.2020

  Description 2020

  encapsulation dot1Q 2020

  IP 10.160.8.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  IP nat inside source list interface NAT-output GigabitEthernet2 overload

  IP nat inside source static tcp 10.160.8.5 80 80 X.X.X.X map route No. - NAT extensible

  IP nat inside source static tcp 10.160.8.5 443 443 X.X.X.X map route No. - NAT extensible

  NAT-outgoing extended IP access list

  refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq www

  refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq 443

  permit tcp host 10.160.8.5 all eq www

  permit tcp host 10.160.8.5 any eq 443

  No. - NAT extended IP access list

  refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq www

  refuse 10.160.8.5 tcp host 10.0.0.0 0.0.0.255 eq 443

  allow an ip

  route No. - NAT allowed 10 map

  corresponds to the IP no. - NAT

  With the above configuration, we can get to the Internet 10.160.8.5, but cannot cross it over the VPN tunnel (from 10.200.0.0/16).  If I remove the two commands «ip nat inside source static...» ', then the opposite that happens - I can get then to 10.160.8.5 it VPN tunnel but I now can't get to it from the Internet.

  How can I get both?  It seems that when I hit the first NAT instruction (overload Gig2) that 'decline' in the list of ACL-NAT-outgoing punts me out of this statement of NAT.  It can process the following statement of NAT (one of the 'ip nat inside source static... ") but does not seem to"deny"it in the NON - NAT ACL me punt out of this statement of NAT.  That's my theory anyway (maybe something is happening?)

  If this work like that or I understand something correctly?  It's on a router Cisco's Cloud Services (CSR 1000v).

  Thank you!

  Your netmask is bad for your 10.0.0.0/8. I worry not about the port/protocol or since that can screw you up. A better way to do it would be to deny all IP vpn traffic.

  NAT-outgoing extended IP access list

  deny ip 10.160.8.0 0.0.0.0.255 10.0.0.0 0.255.255.255

  ...

  No. - NAT extended IP access list

  deny ip 10.160.8.0 0.0.0.0.255 10.0.0.0 0.255.255.255

  allow an ip

  Doc:

  Router to router IPSec with NAT and Cisco Secure VPN Client overload

  Thank you

  Brendan