Change boot device hp Pavilion

Similar Questions

• Laptop turned on, password appears on black screen, windows loading bar appeared, then got two options in the BIOS Setup Utility and change Boot Device order, I don't know what is happening, help please!

  My sisters notebook froze and she turned off the power switch, when she turned on the screen was black and a password box appeared when I entered the password, the XP loading bar came as usual and then I had two options at the bottom of the screen. We want to press F9 for and the other was to press F10 for BIOS Setup utility, after seconds, the screen went black and then appeared again the password and the circle continues. The laptop is only 1 week and I don't know if it's something she did or if it's a technical foul, I would be grateful if someone could help me or if I should take it to a technician. The laptop is a Compaq Mini 110 and it works on Windows XP Home Edition.

  Hi, your sisters Notebook is under warranty and it could be a hardware problem.

  As the laptop is only one week.

  I suggest that advise you your sister back to the place where it has been sold since.

  Slan go foill, Paul

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• No boot device after changing the partitions

  Hi all. I've lost the ability to start in my Windows partition through bootcamp. When I use startup disk system prefs. OSX, he can see Bootcamp, but rebooting produces an error message "no boot device." If I hold the alt key while rebooting, I can only see the Macintosh HD, without bootcamp (or recovery, by the way). I can see the Bootcamp drive on the desktop, so I can use Parallels to run Windows based on this drive, I know that the drive itself is ok.

  I did a fair bit of mucking partitions. I decreased my Macintosh HD partition and inserted a new Macintosh HD and Bootcamp. Then, things are funky, and I created a volume of CoreStorage on top of Macintosh HD and it is associated with a partition on an SD card (created a fusion DIY with a TarDiskreader). All this worked fine and I now had a huge hard drive Macintosh and boots fine Mac, Parallels works fine, but I can't start natively in Bootcamp.

  Can someone help, please?

  Here is the output of "distill the list:

  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.3 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            279.8 GB   disk0s2
     3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
     4:                  Apple_HFS Untitled                20.5 GB    disk0s4
     5:       Microsoft Basic Data BOOTCAMP                199.4 GB   disk0s5
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *255.9 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:                  Apple_HFS TarDiskFirst            309.0 MB   disk1s2
     3:          Apple_CoreStorage Macintosh HD            199.8 GB   disk1s3
     4:                 Apple_Boot Boot OS X               134.2 MB   disk1s4
     5:                  Apple_HFS WinData                 55.2 GB    disk1s5
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +479.0 GB   disk2
                                   Logical Volume on disk0s2, disk1s3
                                   663FCC6B-F913-4137-B61C-9A318FF32328
                                   Unencrypted
  

  And 'sudo disk/dev/disk0:

  GPT fdisk (gdisk) version 1.0.1
  
  Warning: Devices opened with shared lock will not have their
  partition table automatically reloaded!
  NOTE: Write test failed with error number 1. It will be impossible to save
  changes to this disk's partition table!
  You may need to deactivate System Integrity Protection to use this program. See
  https://www.quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
  for more information.
  
  Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present
  
  Found valid GPT with protective MBR; using GPT.
  
  Command (? for help): p
  Disk /dev/disk0: 977105060 sectors, 465.9 GiB
  Logical sector size: 512 bytes
  Disk identifier (GUID): 918541C4-E232-154C-BC98-413BDA1DBBCC
  Partition table holds up to 128 entries
  First usable sector is 34, last usable sector is 977105026
  Partitions will be aligned on 8-sector boundaries
  Total free space is 262288 sectors (128.1 MiB)
  
  Number  Start (sector)    End (sector)  Size       Code  Name
     1              40          409639   200.0 MiB   EF00  EFI System Partition
     2          409640       546975591   260.6 GiB   AF05  Macintosh HD
     3       546975592       547237735   128.0 MiB   AB00  Booter
     4       547237736       587356159   19.1 GiB    AF00  Untitled
     5       587618304       977104888   185.7 GiB   0700
  

• ThinkPad Tablet 2 BIOS: I can't change the list of boot devices. Help, please!

  Hello community,

  I need to restore Windows on my ThinkPad Tablet 2 via USB. But I can't change the list of boot devices in BIOS. The F12 option is not available. It is said: "F12 key is used to call a pop-up the boot devices list. This option is available only when supervisor enters setup. »

  What can I do?

  Kind regards

  The problem is solved!

• HP Pavilion Dv7: No boot device error * HELP *.

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  Carbender wrote:
  

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  First, take out the HARD drive and put the screws to the right to maintain and replace the HARD drive and reboot again. It could be that the missing screws causing the HARD drive vibrates too and make the heads and causing the HARD drive having problems.

• HP Pavilion 11 x 360: not found boot device

  Boot device not found please install an operating system on your hard drive. Hard drive (3F0)

  @peace2,

  Hello and thanks much for posting back with the information.  Here is the link to the manuals of your systems.

  PC HP Pavilion 11-n008tu x 360 (ENERGY STAR) - manuals

  You should find all the information you need from this page about what hard drives, you can use to replace the old.

  Thanks again for posting and have a great day.

• Pavilion DV7 6c50eb: Boot Device not found

  Hi all

  I just change the HD of my laptop and after booting with the Win 7 DVD and install the operating system, I get this screen "Boot Device" not found.

  I am able to boot with the DVD, but I can't the normal HD boot.

  This is a new HD, it's all clean and working, I re-install after the first failure but still the same issue.

  Please let me know your thoughts

  Thank you very much

  FX

  I change the port on the motherboard, everythings works now... I believe that the port was not active and I have found no opportunity to change the option in the bios... duration of the other port have solved the problem.

  See you soon

• CAN I CHANGE MY FIRST BOOT DEVICE WHILE WINDOWS IS OPEN?

  Hi all my computer screen laptop don't work. so I use it with another screen (you know monitor etc.) but I have format my computer and my first boot device's hard drive so I have to change, but in the start screen, I see nothing because the screen of the monitors comes after the Welcome screen. can I change while windows is open?

  If you get no video on an external monitor, some laptops have a combination of keys that you press to switch the video output display only / sometimes both / built video screen shows only - of the manual for the model of the user or owner.

  You can try the following key combinations when you start the computer:

  Fn + F4 or Fn + F5 or Fn + F6

• HP Pavilion 15 t-n200: sometimes not found black screen boot device

  Computer during the race will go sometimes to black screen and say "boot device not found", I am able to

  correct the problem by power off, wait a few seconds back, computer power will start

  Save as normal and work very well.  This happens maybe once a week. My fear is of course to some

  time not to come back to the top. Are there corrective measures, should I try now? I have a hybrid

  static hard drive (ST500LM000-1EJ162)...

  .

  Hello @jla11,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the laptop to a black screen and tried to help you!  I see that you will get the error on the hard disk.

  You might try to test the hard drive for the failure.  In this way, you can check if there are problems.  You can use the following to help:

  Laptops HP - device not found Boot error or hard drive not detected

  You should be able to skip to step 2.  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion Notebook 15-p204na: not found boot device

  I get the folowwing message:

  Not found boot device

  Please install an operating system on your hard drive

  hard drive (3F0)

  I did a restore default BIOS, but it did not work.

  @Ram14: see is something in the linked thread help: ' Hard Disk - BootDevice (3F0) not found "error - HP Support Forum's - 2443931

• Nootbook games Pavilion: changing boot order

  Hello I need help with this. I installed linux os next to win 10 now start the windows right system

  I want to change the boot order, I already turned off secure and changed to Lagacé start but still could not change boot order

  whenever I need to press F9 to choose the operating system and it is very annoying

  

  Hello

  Thanks for posting in the HP Support forum.

  You have installed GRUB?

  If please check this URL/wire and follow my links:

  > > http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/UEFI-vs-Lagecy-boot-order/td-p/5292172

  I hope it works for you!

• G72 Pavilion. : no boot device. Insert the disk and press any key

  My hard drive died recently. I installed a new. Now I'm gettig no boot device - insert boot disk and press any key. What should I do to fix this?

  Hello

  If you find your recovery DVD, you can use them to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not, you can order a replacement set by starting at the link below-, the cost can vary a bit depending on where you live, but they are generally inexpensive.

  Order HP recovery disks.

  If you have a problem with this link, try to order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion g62136tx: not found boot device... Hardisk3F0

  When I turn on the laptop... it's "boot device is not found... Please install OS...» Hardisk 3F0 "... But I have restored the default bios settings... recovery even played with the recovery discs... even after that the same problem persists... When I did the test drive... once he saysass but the next time he appears not found... what should I do? Help me please!

  I think that either the hard drive or motherboard fail, and you must go to a workshop for advanced diagnostics.