Problem of sound recording

Similar Questions

• Skype 'problem with sound recorder '.

  After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

  After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

  "Problem with sound recorder" suggests that there may be a problem with your input device.

  Open Device Manager (right click on my computer > properties > hardware > Device Manager) and search for "imaging devices". Click on the + to expand the category.  There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

  While still in the Device Manager, click on the + next to "Sound, video controllers and game."  Locate the entry of your webcam microphone. There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

  Take a look at control panel > sounds and Audio devices

  Click on the tab "Audio".  What is the default device for sound recording?  It should be your webcam; If this is not the case, adjust it using the drop-down list box.  Same thing for the "Voice" tab and the default device for voice recording.  Be sure to click on the "Apply" or the OK button.

  Click Start , point to programs , point toAccessories , point to entertainment and then clicksound recorder .  That you get error messages when you open or you try to open the sound recorder? If so, please include the entire message, without paraphrase, in your response.

• Problem of sound recording volume control

  I just installed a USB turntable and I have a problem: when I go to control panel, sounds and devices, click the Audio tab, in the field of sound recording, the volume button is gray out and inactive. The turntable is the record - but it's a recording at a too low volume and I would like to increase the volume. But with the Volume key is inactive, I am unable to do so. How can I increase the volume of the sound recording if this button is disabled? Thanks in advnace for your answer.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Problems of sound recording in Windows 7

  My wife has just purchased Dragon speech-to-text software and try to make it work. When she speaks into the microphone, the software shows that it is to hear his voice (levels bounce up and down with the cadence of his voice), but Dragon indicates that he has trouble hearing.

  She then went to Windows Sound recorder and it is very well made. But then in Control Panel, when you go through devices to configure the microphone and try to run this process, he also complains that he cannot hear. Is attached a screenshot of the dialog that appears in this process.

  The fact that it works in sound recorder makes me think that the device driver levels levels micro, etc. must be correct and functional. So it's strange to me that the thing in Control Panel does not work as it is also part of Windows.

  Any ideas what might be happening here? We have removed and re - detect the hardware and reinstalled the device drivers and none of this has made a difference.

  His is an all-in-one machine Acer Aspire running Windows 7 Ultimate.

  Thank you... Rogers

  

  Hello Roger,.

  According to the description, I understand that the microphone on your device becomes an audio input, however, there are problems during the recording of the voice. I will certainly help you in this matter. To better understand the issue, I would like to ask you a few questions.

  1. You use a headset to record the sound?

  2. You have installed all the latest drivers for the computer?

  3. Have you installed an antivirus software?

  4. What Dragon speech-to-text version are you using?

  I suggest you test the compatibility of the software with windows 7 to do this, click on the link below:

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  This problem may occur when there is a conflict with the driver or problems with registration of the components. I suggest you try the following methods to diagnose and resolve the problem.

  Method 1: Recording Audio Troubleshooter

  It checks the common issues, for example by ensuring that both a map of his work and a recording device are installed on your computer. To do this, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  I also suggest you to install the drivers in compatibility mode. By this, you can install a program more former who maybe isn't compatible with your version of windows. For more information on this subject, click on the link below.

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

   

  Hope this information was useful.

• Problems with sound after recording project and reopen it first elements 13

  I am a new user of Premiere Elements. It runs on a PC Pro Windows 8.1. Everything going well until I'm not closing the pragram. If I save a project, close the program and re-open, audio files (any type) can only be heard on the left speaker. If I double-click the audio (audio tool opens upwards) I can see the left and the right lane and it seem okay, but in the draft, I can not both speakers to work. Burning of the project or making changes nothing. All other software is running okay, i.e. None of the problems of sound. Either it's a bug or it's sth. in the settings.

  The sound chip is a RealTEch High definition audio on an Asus motherboard. Any help is very appreciated.

  Thanks in advance!

  Finally, what helped was uninstalling the realtech High Definiton Audio Driver and re-install the same version.

  It is not sensible, but it worked.

  Thanks for the support everyone.

• When I record a video with sound recorder windows 8.1 youtube I can't hear any sound when I play it back

  Why can I not hear any sound recording of youtube videos with my tape recorder windows 8.1?

  You still have this problem?

  • [1004066/questions/1004066]
  • [1004104/questions/1004104]

• How to turn off the sound recording on a Camileo H20?

  I just got a new VCR Camileo H20. Directly from the box.

  I use it for video road races to complement the photographs that I take with my Nikon digital camera.

  I am really satisfied with the short video clips that I record, whether they are clear and sharp (fingers crossed). They are very well received by the riders.

  * http://www.youtube.com/watch?v=_bNCKCKafCw *.

  The only problem I have is that I would like to turn the microphone off. Supporters cry comments that are usually fairly light, but recently one or two went over the top with comments derogatory offence.

  I know I can turn off the sound in the video editing software that I use, but as I said, I would like to turn the microphone off.

  I do not understand why, when I put the * sound * to * Off * in the Menu it still records the sound.

  Any help on this would be really appreciated.

  Thank you.

  > I do not understand why, when I put the sound on Off the menu it still sound recordings.

  I m H20 not owner but I have a Camielo: 30. But the two are very similar, the sound-> off the coast of the option that you can find in the menu does not sound recording via microphone, but the sound that appears by pressing the buttons by navigating through the menu.

  If you can not turn off the sound while you record a video.

• Satellite A100-234: Real Player sound recording does not

  Hello

  I have problem with my sound system. I have the satellite A100-234.
  When I try to record from the sound recording, that it does not record...

  Please please please help me if you can

  Hi Ad

  Many applications use third part is not really about Toshiba, but it will be interesting to know what you want to record exactly (some radio music station?). If so, I can recommend you radio RIP Internet Radio Jack.

  Also, try to see the real support page. They can give you more info on clean products.

• Satellite P300-16N: no stereo mix for sound recording

  Hello

  I'm french too sorry for my English... school ^^

  My problem is that:

  I have a toshiba Satellite P300-16N and I will record the sound of music on the internet from my PC...
  But, I do not have the 'stereo mix '...

  I have a "conexant high definition audio smart221" and in the menu on the edge: "to see the decontaminated devices" but nothing... :(

  Help me please :(
  http://images4.hiboox.com/images/3008/9849a2fadd2adf1f7cc2cba4c7e06e6c.jpg

  I'm agree with InvaderZim that this procedure has helped me on my laptop satellite, I thought that this stereo mix is not available and not supported by my laptop sound chip but using the solution as shown above has helped me get the stereo mix for the sound recording.

  Check it out and post comments

• Audio microphone recording sound recording

  I can't get my internal microphone to work properly.  During playback, my voice sounds like I am taking the floor in a kettle + it is barely audible and resonates as I am 1 million miles, speaking via a satellite connection.  I contacted the technical support of HP, was on the phone for about 3 hours during 2 days; I came home yesterday, the laptop (HP ENVY dv7 - 7333cl Notebook PC) at Costco, where I exchanged for an identical one that has the same problem.  On their recommendation, I downloaded a new audio driver, made updates, and last night I did a full system recovery, but, alas, no better... Help!

  [Moved from comments]

  Hi Tim,.

  What is the operating system installed on your computer?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the troubleshooter from the link

  http://Windows.Microsoft.com/en-in/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Follow the steps from the links

  http://Windows.Microsoft.com/en-in/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

  I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

  Hi superconfused123,

  This problem occurs because of a design limitation in the tape recorder.

  You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sound Recorder, Volume Control, and Word Pad is gone and is not found in entertainment accessories, etc.

  Original title: My Sound Recorder, Volume Contol and Word Pad is missing and cannot be found in entertainment accessories, etc. on my Windows XP computer. I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd.

  I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd using cmd or %systemroot%\system32\sndrec32.ex_%systemroot%\system32\sndrec.exe ideas would be appreciated.

  Hi nsuzann,

  1 have you made changes to your computer recently?

  2. are you all error codes or error messages?

  You can try the following steps and check if you can access Sound Recorder and WordPad.

  Method 1:

  a. go to C:\Windows\System32 and double-click sndrec32.exe and check

  If she opens the tape recorder, and then create a shortcut on the desktop

  b. right-click on sndrec32.exe and select send to desktop.

  Method 2:

  About lack of WordPad, try the following steps:

  Step 1:

  Try to launch WordPad into the run window and check.

  a. Click Start and select run

  b. type WordPad, and then click Ok

  Step 2:

  a. navigate to the following location:

  C:\Program Files\Windows NT\Accessoires

  b. right-click on wordpad.exe and create a shortcut on the desktop

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• XP sounds low and scratchy sound recorder

  using a dell with XP OS computer I have reciently erased my disk hard back to the "factory condition" using Norton Ghost disk, however, I am not able to record and playback using Microsoft Sound Recorder, as I was before.

  I'm sure there is a simple solution (e.g. drivers) and I can remember what it was.

  Initially, I had this problem and sought another recorder of sounds, which I ran for a day or two, and because he was in conflict with another sound program (Nero), I uninstalled it immediately.

  It is after uninstalling I noticed that Windows Sound Recorder worked then and everything was fine.

  I have the sound that I hear all my MP3 music without fault when playing on Windows Media Player using Creative Sound Blaster PCI, I deleted obviously something that was there before reformatting my hard drive. WITHOUT having to search for an another sound recorder - can you tell me what is the solution? Thank you

  A more technical and detailed explanation of the problem is below.

  The sound "waves" were still visible on the sound recorder, check it was scientifically to come in which could be lowered or raised with the Volume control - now there's nothing.

  Now there is a slight frying sound when music is recorded and played back, as if it were a radio cities not expensive 3 away. but once again my MP3 music plays without problem.

  I select file > properties > convert now, and by choosing 'Name' 'CD quality' on the recorder sounds and still no luck, infact the only way to hear the sound of frying by far is to keep the name of "Untitled" by default using the format "PCM".

  Thank you for your time with this question.

  Yes, it would be a good idea to re - install your specific sound devices for the XP drivers.

  Use Audacity to record with, it of better and should not come into conflict with anything whatsoever. It's also free. Sound recorder is (IIRC) limited to 60 seconds of recording. Audacity is not more you can convert and edit your audio files on it.

  See you soon,.

  Jerry

• Sound Recorder does not work anymore, I can't save my file, how can I find my file.

  I lost my sound file, because the sound recording program has stopped working... can I find my files lost... maybe, it is in my drive by the template file...

  Go to start and type the following in the search box and press on enter: folder

  This should open your temporary files folder, look for a file named ART___.tmp that allows to change _. If you find, copy it on your desktop and rename the file you want and Add .wmv in the end.

  For example, you can find ARTF11.tmp - copy it to the desktop and rename to myrecording.wmv

  Note that there may be problems during playback of the file (in particular, research) because it was not registered properly.

• How to change the Windows Vista sound recorder

  Does anyone have information on how to editing can be done in sound recorder in Windows Vista, such as the removal of noise, etc. ?

  You would not be able to change the sound by using the Windows Vista sound recorder after recording is done, you would need a different for that one application. In this case, you can instead to fix the problem before registration, you can refer to the link below to get instructions on how to reduce POPs, clicks or other distortions.

  http://support.Microsoft.com/kb/936693

  For more information about how to troubleshoot audio recording in Windows Vista, you can check the link below as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems