Problem of storage with e3000, once the hard drive goes to sleep, no way to access

Similar Questions

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive. Is there a way to recover?

  I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive.  Is there a way to recover?

  Hello

  What version of Windows are you using?

  If it is deleted from the memory card, it can not be recovered. However, there are some third-party applications or the tool that will help you recover photos. If you have saved the pictures on the hard drive and deleted, so you can check in the trash.

  See also:

  http://social.msdn.Microsoft.com/forums/en-us/olsbgeneral/thread/10ef8d69-1049-49D3-9957-9e07d5ed5804/

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Problem of storage space satellite L305-S5962 HARD drive when installing XP

  Hello

  Last week, I ordered two TOSHIBA Satellite L305-S5962 for my children and finally happened yesterday.
  I was so glad that I found all drivers XP needed for it on Toshiba USA website, however something weird happened when I went to install XP over there.

  It came with preloaded Vista and while under Vista, I checked the HARD drive space it is said about 250 GB (240 - ish), but during the installation blue screen boot XP it read C 131 GB only partition.
  So, if you round up to about 130 GB, where the other 90 GB's?

  This problem has happened to these two Toshibas, and read the two HDD substantially the same.
  In Vista, it reads close to 250 GB, but when installing XP blue screen (once I turn off the AHCI setting in BIOS) it reads at 131 GB. Is this some kind of driver issue? or to issue OS with AHCI?

  On the Toshiba site there are two HARD drive drivers, are a .exe and the other a .zip file.
  I tried both in the XP installation CD of nLite, but it does not help.
  It still reads GB 131, so now I have no idea what to do, or maybe I have something wrong during the splicing of nLite?

  In any case, if anyone has some insight on this problem, please let me know.

  Thank you!

  -G.P.

  P.S. Here is the link to site from USA, for XP SP2/SP3 drivers, HARD disk drivers.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2350214& rpn = PSLB8U & modelFilter = TOSHIBA + Satellite + L305-S5962 & SelCategorie = 3 & selFamily = 1073768663

  Even once, if someone has seen, thank YOU!

  > I checked disk space HARD it is said about 250 GB (240 - ish), but during the installation blue screen boot XP it read the partition C 131 GB only.

  The HARD disk is partitioned into 3 partitions.
  The first partition contains OS preinstalled; Vista
  The second partition contains the image of Toshiba HDD and the last third partition is hidden. It s a small partition created by Vista and it contains the backup files. These files can be used if something goes wrong with Vista OS or if Vista needs to be repaired.

  So I guess you've seen only the first partition that contains the operating system Vista

• Question about reinstalling windows on a laptop that came with it, but the hard drive failed and had to be replaced.

  OK, until recently, the hard drive of my laptop couldn't, and I had to replace, no biggie, I really care about this laptop in any case. Then I threw ubuntu top and let it go from there. But recently, I wonder, if I could get windows again for her, for free. I am sure that it is not under warranty, but I could go and check of 90 percent. I have no back ups for it because it was cheap.

  Additional information:

  HP Pavilion G6-2235us

  Bought in the United States

  Provided with Windows 8

  No backups.

  Yes, if the hard drive has been installed you can just catch a Windows ISO-8 8.1 is not available now and make an own Install.Then, if you have the sticker of the product key on the back of your laptop use the product key to activate. Devices with Windows 8 generally have incorporated in their BIOS product key and use the following tool to get the product key:

  Download the key tool produces OEM of Windows

  Then, you can use the key to activate. In the meantime, here is the link to download windows ISO 8.1 and generate the installation media

  http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

  Later you can improve Windows 10 too if you wish.

  Let us know if you have any other questions.

• Dell Inspiron 531 s problem of power/does not recognize the hard drive

  My Office does not illuminate. I replaced the power supply. No, it powers on but does not recognize the hard drive. It gives an error as SATA 0 None SATA 1 no SATA 2 No. How do we know that the cables are properly connected. I feel like I'm very close to solving the problem but don't have a clue what that next step to follow

  The original PSU had 4 sets of cables and connectors.  The new power supply has 5 sets of son.

  aries7531

  From your post, I guess that the configuration of the system now recognizes the hard drive?

  If you do not have a floppy drive, then BIOS can find the player who isn't there, it returns this error.

  Make sure that the floppy drive [drive A] is disabled in the [BIOS] installation system, page 173, so that it is no longer looking for the disc and see if this stops the error message.

  If the hard drive is recognized in the configuration of the system, he now knows in windows "My computer" or in "disk management, [right click on 'My computer' and select 'Manage', then disk management]."

  Bev.

• the hard drive goes inside the machine who has a handle inside the dc7700?

  My father got a few computers in the University, he worked at and said he wanted me to install a hard drive to see if they work, but I cannot know where it goes as I ever did for a computer tower. The computer I'm is a HP dc7700 ultra Slim.

  Hello

  There are further instructions on replacing the hard drive here. The video on the link below can help.

  http://www.HP.com/go/SML?media=0F6B971F-8BBF-46c4-A9AE-0AE1E3DC6009/dc77_usdt_FRU_video_harddrive.htm

  Kind regards

  DP - K

• Once the hard drive crash but Thatcher do not open files recorved

  Hello

  My Vista OS crashed and I had to reformat the system.  Before reformatting my hard drive, I managed to recover all files and sees them as well.  I copied and moved to another drive.  I can see all the files with the correct extension and a good size of the file, but when I try to open, it opens in corrupted form.  What is happening with all the recovered files.  I still don't think that the files have been corrupted, but I think it has something to do with Vista I had on my sytem earlier.  I used a passowrd administrator to connect to my laptop and I was the only user.  Can someone help me to recover my data.

  What kind of re-setup do you have?  You have a folder on your system called Windows.Old?  If so, you can always have access to the original data.  Go to the Windows.old folder and open it then go to the Users\ directory and see if you can find your files.  If so, try to copy them and move them to your new records and see what they are able to open better than the copy that you made.  If you do not have Windows.Old (and I suspect that you have not if you reformatted) so this isn't an option.

  Another option is to try the file corruption repair tools.  They are often specific to specifc types of files or programs.  Some are free, and some are commercial.  I don't know how they will work, but if you want to try (although considering you will likely have to file-by-file), here is a link to a Bing search engine for such tools: http://www.bing.com/search?q=repair+document+file+Corruption&first=1&FORM=PERE.

  The only other option that I can think of is to take it to a professional data recovery technician; However, they do offer generally no guarantees (you pay the same price if they recover everything or if they get nothing) and they are also usually very expensive.  You must decide how the data is important to you and make your own decision on that.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Toshiba dynadock can't connect to XPS L702X Windows 7 once the hard drive has been replaced.

  I tried the two installation from cd & install updated drivers from the Web site.  According to the documentation Dynadock Miss: Displaylink USB Gigabit network which I've tried to install the Displaylink but can't find it under network adapters.  I'm also missing Displaylink USB audio adapter, adapter, Displaylink (4305) & Dynadock U 3.0 under USB graphics cards.

  any advice or assistance would be appreciated

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your concern about access to the devices connected via the USB ports. We will help you with this problem.

  Few try the TROUBLESHOOTING steps below and check if this may help.

  Step 1: I suggest you to run the hardware and devices troubleshooter.

  Hardware and peripheral troubleshooting check the common problems and ensures that a new device or connected to your PC hardware is correctly installed.

  Reference: Open the hardware and devices Troubleshooter

  Step 2: I suggest an run Network Adapter troubleshooter

  Troubleshooting of network card find and fix problems with the wireless network card and others.

  Reference: using the troubleshooter from network in Windows 7

  It will be useful. Get back to us with an up-to-date this issue report for assistance.

• Try re-installing CS5 on computer once the hard drive has been wiped.  Help, please!

  Hello!  I am installing CS5 (which I already bought).  I have all the files right by the help of the Adobe customer service, but I am trying to install on my Macbook, I receive an error message that says: 'Install' is on the image disk 'DesignStandard_CS5_LS1.dmg '.  Google Chrome downloaded this disk image today at (time) of trials3.adobe.com.  Help, please!

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

• Satellite Pro A120-154 - how to remove the HARD drive password?

  Hello

  I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

  Further I can't find any info on this in the user manual. How can I do this?

  Thanks Tino

  Hello

  I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

• Satellite Pro P300 - remove the HARD drive to make a backup?

  My P300 went to my local store to repair for a network card problem. I thought it was just a software problem or driver, so I wasn't worried that my machine is still under warranty. After investigation, they stated that they could not resolve the issue, so would be to reformat and reinstall the OS, they thought they should solve the problem.

  To my horror, I found that they had broken the seals of guarantee and open to the top of the machine. They claimed the only way to save the P300 before reformat it, is to remove the HARD drive!
  Is this true?
  (It turns out that a broken chip is to blame, but because they violated the warranty, Toshiba will not touch!)

  Can anyone say about this the removal of HD to support it please?

  Hey,.

  Normally it of not necessary to restore the factory settings with to remove the HARD drive but don t you worry about this. The laptop can still be opened from a service provider authorized without losing the warranty.

  I also put t know why they did, perhaps they have checked the material. It would be possible because they have professional diagnostic tools.

  But interesting to know whether or not your problem is now resolved?

• How to use a USB to boot Windows on a PC, the hard drive contains no BONE?

  I have an ASUS ROG G75vw with nothing on the HARD drive. Nothing stored, no OS, it is just white. I have the product key for Windows seven that is installed by the manufacturer. I bought the laptop used, so I have no recovery disc and no boot disk, nothing of the sort tha. It's out of warranty, so ASUS will not help me. I can't find any ISO files anywhere either. Someone please point me in the right direction. I've exhausted my known options.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Why are JPEG images on the hard drive of my computer all of a sudden now Virgin?

  JPEG images on the hard drive of my computer are now white (it reads 0kb and the tile is missing) and when I go to open it in Windows Photo Viewer, it gives me an error saying that there is not. I noticed that it happens to almost all of the photos that I have edited in Lightroom 5. I shot an entire season of football last year, all in JPEG format and with my guards, I advanced and edited in Lightroom and now they are virgins. I never moved my photos anywhere. I turned the game in November, created the folder for this game, and that's all. I'm almost a year more later to print them for my portfolio and the file is missing! Lightroom can show the photo, but I can't make adjustments in the develop module because the file is blank on my computer. The weird part is that the sticker is there, the number of correct image is there, and when I click to display in the Explorer in Lightroom, it pulls up the JPEG right, if the location is OK in Lightroom, just no thumbnail image and no image size when I go to open it using the Windows Photo Viewer. I checked the other games that I shot and it's happened to almost all games.

  If you have pictures on your camera cards, then of course you can simply copy them to the appropriate locations.

  There are plug-ins in Lightroom that can recover the preview using Lightroom, but these will be smaller and lower in quality than the original. Perhaps one of our plug-ins experts can suggest the good plug-in.

  If the hard drive goes really wrong, as I suggested, you definitely want to be replaced. If this is the case, you won't continue to use it. You might want to run some diagnostic disk on this subject.

• A 17 in the hard drive won't go in a 15-the macbook pro

  A 17 in the hard drive goes in a 15 to the macbook pro? both are about 6 to 7 years of age.

  There are two main sizes of the reader:

  Rated 3.5 "drives for desktop computers

  Nominal 2.5 "drives for laptops. Long ago, he must also worry about the thickness, but not for these two models.