Problem of the disk image driver 6500 a

Similar Questions

• I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

  Hello...

  I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...

  I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...

  Help, please...

  Much thanks

  Lisa

  < re-titled by host >

  The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.

  Where do you see the message your computer?

• Make the disk image using disk utility and the message "Apple_HFS: 0" is displayed

  I'm doing a disk image to try to work on that later. This is an image of a failed disk drive. Some areas can only be read, I know and the process takes a long time because of this, so I'm willing to be patient.

  I get messages in the disk utility window that says "Apple_HFS: 0" and "Creation of image xxxx.dmg.

  The disc has about 700 GB. I started it about 20 hours ago, and the blue bar is about 5% of the way, so not much happened.

  I fear that the message "Apple_HFS: 0" means that the disk image is not made. I am concerned about the part "0". I don't know what that means.

  I don't want to do it for days and days and find that there not to make a disc image all this time.

  I realize that the fact that the external drive is damaged (probably damage) means that this process will take longer than normal. I am willing to leave it for a week so that he can make a disk image. But not more than a week because then it is not worth my time.

  So my question is: does the message ' Apple_HFS: 0 "means something bad, or that the message normally during this procedure?

  Apart from this message and the message "Xxxx.dmg imaging", there is no other message.

  I think I'm making progress because the bar has moved since I started the process. For a long time I couldn't see a bar at all. And today, after spending the night, there is a small bar, as I said, about 5% complete. But it's very slow. It would take at least a week for the disk image to be made. I just want to know if the messages that I see are normal or not.

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• "You must format the disk in drive g before you can use it"

  "You need to format the disk in drive g before you can use it... "Really crappy to get Msg. I have a Corsair 16 GB FAT drive. I got the disc from my Vista computer and go to a XP machine safely. Aaarrrggghhh!

  New tips on how to solve this problem?

  When you say fat, do you mean exfat?

  If you have the disk formatted exfat format, you may need to update xp so as to be able to read,

  article following the base of knowledge may help you.

  http://support.Microsoft.com/kb/955704

  good luck keep us,

• "You must format the disk in drive J: before you can use it"

  Says error message "You must format the disk in drive J: before that you can use" I have a removable USB storage drive that I always connected to my computer whenever I have download movies save disk space on my computer.  Now, he wants me to format this disk storage.  Also, where he used to qualify this drive as "Removable disk", it is not labeled as Local J: drive. I don't want to format this drive because it erases all my files and folders on removable USB storage drive.  Please help me.

  I had the same problem.
  And I have a solution for you... The problem is that when you plug in your HD first, Windows 7 install your hard drive and associate it with only this USB port (whether the USB port "4") If you want to use (HD) again, you need to plug it into the same USB port (USB port '4'), where it was first installed. It's stupid! But that's how it worked with my HD.

  Try all USB ports you have on your PC.

  Good luck.

  Hope this has been helpful. : D

  PS: the same problem is with all the damage that connect you to your pc.

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• Error Installer of photoshop cs5 "eject the disk image.

  I use a mac but already owned a PC, for which I bought Adobe Photoshop cs5 about 4 years ago. I installed photoshop using the disk on my PC after that first of all, I bought the product and I'm now trying to set up on my new mac. However, the Setup program will not open on my mac because when I click on "set - up.exe" it says that my mac cannot open this type of file - which makes sense because I know that if I install on a mac, it should say 'install.app' on the file I'm supposed to open. This leads me to assume that I bought the product to download on a PC instead of a mac, I thought wouldn't matter because I know that you can download the installation program from cs5 photoshop on the adobe Web site, then I can just post my previous purchase of photoshop cs5 using serial number. However, when I download the installer from the website, open the "Adobe Photoshop cs5" file, and then click 'Install', I get an error message which reads "'Install' is corrupted and cannot be opened. You must eject the disk image. "as shown below.

  

  I deleted the program installation and re-uploaded three times now and it comes up with the same message everytime I try to open the installer.

  Is it possible to install photoshop cs5 on my mac using the disc that I bought for my pc 4 years ago, although I could not open the file "set - up.exe?

  I do something wrong when I try to download photoshop cs5 on the adobe site?

  Should I buy a new version of photoshop to install on my mac?

  You do not put diesel in a petrol car, and you can't install Windows on a Mac programs... unless you want to install http://www.parallels.com/ "emulator" on your Mac to run Windows programs

  At least that the documentation provided with your Windows disk explicitly says that you have a serial number that works also for a Mac version, download the Mac to install it won't hurt, because your serial number does not work

  And there is the problem of the old software on a new Mac... read below... which, as I said above, won't help you with a serial number of Windows

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• "installation is damaged and cannot be opened, you must eject the disk image".

  After you download the master creative suite 5 and then try to install the load down, I got this message and could not install the load downwards;

  "installation is damaged and cannot be opened, you must eject the disk image".

  What does that mean?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• 'Install' is corrupted and cannot be opened. You must eject the disk image.

  Downloaded Photoshop CS5 several times and keep getting this warning: 'Install' is corrupted and cannot be opened. You must eject the disk image. Help!

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• After downloading CS5 and clicking on install, I get the message that the disk image is damaged and I should egect the Image

  I downloaded CS5 on the site was given to me by Adobe. When I click the button install, a message pops up "The Disk Image is damaged and cannot be installed, eject the disc" what should I do?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Mac error: 'install' is corrupted and cannot be opened. You must eject the disk image.

  I'm on a MacBook Pro and after I dl the Suite CS5 Design Standard is what I get: " 'Install' is corrupted and cannot be opened. You must eject the disk image. ". I rebooted my laptop several times and retried several download but it's the same message. What can I do if I can install this new product?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491