Problem of touchpad and keyboard on laptop Satelliete C

Similar Questions

• Satellite A300 - problem of touchpad and keyboard

  Hello I have a problem.

  The first time I start the computer, the touch pad and the keyboard Don t run, and I need to connect a usb mouse to restart the computer. And in the second time, the keyboard and the touchpad to work correctly.

  I have a Toshiba A300 and I have Windows 7 Ultimate 32 bit
  This who could I do to fix this?
  My English is very bad, but I hope you understand me and that you can help me.

  Greetings!

  According to your message, you have to restart the laptop in order to get the keyboard and the touchpad works properly.
  There may be something wrong with the drivers for the keyboard and the touchpad
  As a first idea I would recommend to update the operating system.
  This means that you should check if a new installation of the OS could solve this problem.

  Keyboard driver is part of the Windows OS, so I think this should be verified.

• Update problems - touchpad and keyboard do not work!

  After you install an update, the touch pad and the keyboard on my laptop won't work.  I was able to use a wireless mouse, after a few failed attempts.  Any suggestions?

  Hi jennkjohns,

  1. what happens when you connect the keyboard to the computer?

  2. what update has been installed on the computer?

  Method 1

  First of all, I would say you visit your laptop manufacturer's website to download and install the updated driver for the touchpad and check if it works.

  Check in the Device Manager, the State of the keyboard.

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Method 2

  Checking update was installed before that the problem occurred.

  (a) updates installed open by clicking the Start button, click Control Panel, click programs

  (b) and then, under programs and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the link below to learn more about how to clean boot in Windows XP.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I change the sensitivity mouse and keyboard of laptop Lenovo?

  How can I make my laptop Lenovo with Windows 7 require more pressure (or deliberation?) for the keyboard and mouse so I don't have inadvertenly making unexpected orders?

  Hello

  Follow these steps and check if that helps:

  (a) click on 'Start' (or the Windows logo key) and select 'control panel '. Select 'Classic view' in Vista, if it is not already displayed. Double-click "mouse".

  (b) access the "mouse properties" in Vista and Windows 7 by clicking on the Windows logo and typing 'Mouse' in the search box. Press enter, and then click 'Mouse', once the search is complete.

  (c) click on the tab "Hardware" select the touchpad and click 'properties '. If the parameters are not displayed, click on "change settings". In Windows 7, click "Device settings" and select the touchpad. Click on "settings".

  (d) change a setting on the touchpad of your Lenovo laptop by pressing the sign '+' next to the option you want to change. Click "OK" when finished to save and apply the changes.

  For more information you can contact Lenovo support:

  http://support.Lenovo.com/en_US/

• Satellite Pro L300 (PSLB1A) touchpad and keyboard problems

  One of my school L300 keyboard and touchpad stopped working after a months of normal use. It has been reported, and on the advice of our technician, I used the disc of the cure to reinstall everything back to the original state. However, this does not have the problem. Now, I need to go through the normal configuration screens and am required to enter a user name that I can't do! This means that I can not check the drivers etc. The keyboard works fine in the BIOS, but not once windows starts.

  Hello

  Set the default BIOS settings and try again.
  Starting installation of recovery can you use keyboard (arrows, ENTER) or mouse in the Toshiba Recovery menu?

• Satellite L300D touchpad and keyboard doesn't work at all

  Hello

  This Satellite L300D laptop isn't even a year and it gives me a heck of a lot of questions.

  About 3 times a week just touchpad will stop working (after around the crazy stuff & clicking its own)
  When I plug in a mouse, it works.

  Today the keyboard gave upward, after a re-start, it will allow me to type in my password, but after that its dead.

  Help, please.

  Hello

  The laptop is not one that s good year because security must still be valid
  For me, it sounds like a hardware problem (problem of keyboard).
  But he s strange you can still type a password, however, that he sees as a hardware problem and therefore, you should get in touch with ASP in your country

  If the warranty is valid, then everything should be done for free!

• J053ea HP Envy 17 - using the touchpad and keyboard simultaneously

  I just bought the laptop of HP Envy 17 in Windows 8.

  One problem I have is when running games such as Call of Duty, I need to be able to use the touchpad with the keyboard to control the game properly.  It seems that, once I have a key that is pressed, the computer does not accept any entrance of the touchpad until I release the key.

  Will there be an option in the Panel, maybe I need to change to enable the simultaneous entry of keyboard and the touchpad?

  Thank you.

  Hello

  This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

  You can change this as follows.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

  

  Kind regards

  DP - K

• Touchpad and keyboard question P400

  So after you have installed the thin man, I noticed while walking through the game, that I can't use the touchpad to look around because I use the keyboard to work.

  If I stop walking, I am able to look around as usual. This happens in any game. I also noticed that I can not type and move the mouse as well. If anyone has had this problem and where it is able to fix it.

  Hi Blindskinnykid

  Welcome to the Community Forums of Lenovo!

  Can you try to check your Synaptics settings and find to check the Palm.

  Try to set at least, he

  Palm Alters check the touchpad when the input is detected.

  Hope this helps,

  See you soon!

• Satellite A10-S177 touchpad and keyboard do not respond

  After that I updated the drivers for my keyboard and touchpad, they usually answer or freze when the startup screen, xp appears.
  Oh and it works before that.

  What can I do?

  Hello

  Sorry mate but I put t understand how you have successfully updated the keyboard driver?
  The keyboard driver is part of the Windows operating system, so it cannot be updated manually

  Check to see if you can boot into safe mode.
  Press F8, and then choose Safe mode. Then you can try to reverse the BONE at the beginning point of time before the OS was confused upward.

• Touchpad and keyboard T61p sometimes suddenly stops working

  
  

  Hello

  I received a notice of the technical team at my University and it solved the problem.
  It's so simple, I can hardly talk about it, but I'll tell you for the sake of other people that is experiencing the problem.

  I made an another windows update and installed a hardware-update for thinkpad-keypad touch.

  I bought the computer open-back and had to manually install windows and all single conductor, so those who buy the laptop comes with a restore OEM cd should not experience this problem.

• Motherboards and keyboards for laptop computer Vaio model: SVE171E13M

  Hello

  My name is Mark.

  I am aware of the fact that Sony put an end to the production of portable vaio, but I still want to know if Sony always produces keyboards for portable Sony Vaios and motherboards for model: SVE171E13M? I would appreciate a response.

  Thanks in advance!

  Select this option.

  Hi BowlinMark,

  Thank you for considering the Sony community!

  For models/customers in the United States and in some countries, we usually refer them to https://sony.encompass.com/ or contact here for parts and accessories of their Sony devices. Unfortunately, your Vaio SVE171E13M was not recognized by our system. No doubt this isn't an American model or it's just the chassis number.

  Since you are outside the United States and most likely, the unit is not as well US, please recommend our website world of Sony for more information contact the Sony Support Center in your area to the http://www.sony.net/SonyInfo/Support/ for further assistance with your question.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?

• Air burst and keyboard pad of toch lock-up.

  I own DELL, Studio Lap Top with the following: -.

  Intel (r) Core (TM) Duo CPU T8300 @ 2.40 GHz 2.40 GHz;  4 GB OF RAM;  32-bit operating system.

  A few days ago the laptop fan started to be heard. Not heard about before. His constant high speed. At the same time, I haveost on the keyboard, press the key and touch pad functions. There is no answer what it is. I also noticed the power button should now be held in 1-2 seconds to start in place of the normal just push once.

  I am still able to use the computer AI a keyboard remotely (cable) and a remote control (wireless mouse). I checked the system and it says everything is working and that there is a touchpad and keyboard (without a keyboard / mouse attached.)

  All this has happened at the same time I think they must all be connected. I seem to think that there may be a loose connection somewhere for the keyboard, etc. and by default, the fan runs at full speed.

  Before disassembling the computer, someone has suggestions or alternative?

  Thank you.

  Try this until you separate.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Mouse and keyboard stop working

  I have windows 7 64 bit edition Home premium.  Intel I5 6 GB of Ram chip. Had this system for 3 years and no problem.  Today, when I myself post on someones facebook page all of a sudden my keyboard stopped entered the words I typed. did not work.   The mouse was working. I rebooted and it worked for a few minutes.  Then he stopped again.  I plugged in the keyboard to a different usb port and it started working, but then the mouse has frozen completely.  I put the mouse on a USB of Hung and it works for now.   My anti virus is so far - I even ran the Norton Patrick gum aggressively looking for problems and he came back with no risk not found.   Is there any type of virus which would attack the keyboard and mouse?  Did someone had experience with in the past?  I have not downloaded new software in a year so nothing new has been added unless there is an automatic update of windows.  Just checked and the last updated 2/15, a few weeks ago and today is the first time with the problem.

  Hi Carl,

  1. What is the brand and model of the mouse/keyboard/computer?

  2. do you get an error related to the question message/code?

  This problem might be caused by the virus, but this usually occurs due to drivers of bad/corrupt keyboard/mouse/USB host controller.

  I suggest you follow the troubleshooting steps for the mouse and keyboard from the Microsoft KB article and check if it solves the problem.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-NZ/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Also refer to:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Mouse and keyboard suddenly crashes

  Start the computer and everything works normally (I have Win7 btw.). After some time, it can be for 20 minutes, or 3 hours, is not issue, the mouse and keyboard freeze, stop working. And there is a noise as if I disconnected something, I check the mouse and the hubs of keyboard and still nothing. I unplug them, but no sound, I have them and not of his new CAP.  I have PS/2 hubs, or something like that. What the more interesting, than other devices, like a controller or a video camera works normally. Please, help!

  Hello

  (1) when you are facing this problem?

  (2) remember to make changes before this problem?

  (3) what is the brand and model of the mouse and keyboard?

  I suggest you, refer to the article below and follow the instructions provided, check if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  If you have additional questions, feel free to post. We will be happy to help you.