Problem of type float

Similar Questions

• Problem with a float in Firefox

  Hello

  I'm having a problem in Firefox that I can't understand. My < section > floats properly in Chrome and IE but is pushed down below my < end > in Firefox. I'm scratching my head. I have the code through WC3 zest and there is no mistake that could cause this problem. Any help would be appreciated.

  Please note that I do a reconstruction and there are 2 attached CSS pages. hand. CSS is old and gothic.css is the new.

  The page is here http://skeeterz71.com/Gothic

  Thank you..

  If you reduce the width of the Chrome browser it shows exactly the same as it does in Firefox; and so it should.

  The problem is that you use real estate, forcing the section where it can be displayed.

  That said, there are three separate sections in your document to know

  1. header
  2. main
  3. footer

  Directly after the main element is the start of the aside element. The aside element end is just before the main end-element, which means that the aside element has the same content as the main element.

  If you want to control the main content separately from the side bar, you will need at the end of the aside element much earlier.

• Problem adding type VO to ArrayCollection collection item

  Hello
  
  I have problem when you try to add a VO to an ArrayCollection collection as follows. My last entry overrides all my previous entries in the table.
  
  model.selectedItem.date = dateInput.text;
  model.selectedItem.accountno = accountnoInput.text;
  model.selectedItem.debit = Number (debitInput.text);
  model.selectedItem.credit = Number (creditInput.text);
  
  model.accountingdata.addItem (model.selectedItem);
  
  where
  SelectedItem is of type VO
  accountingdata is the ArrayCollection collection
  
  
  
  When I make a record of the first entry:
  trace (Model.accountingdata);
  The result:
  (Array) #0
  [0] #1 (com.accounting.superann.vo::DataVO)
  accountno = "776001."
  credit = 233
  Date = "01/01/1976.
  flow = 222
  ID = 0
  
  When I do a trace for the second and third entries:
  
  (Array) #0
  [0] #1 (com.accounting.superann.vo::DataVO)
  accountno = "776055.
  credit = 2323
  Date = ' 03/03/2000 '.
  flow = 2323
  ID = 0
  Online = false
  [1] (com.accounting.superann.vo::DataVO) #1
  [2] (com.accounting.superann.vo::DataVO) #1
  
  Could someone please provide an explanation/solution?
  
  Very much appreciated.

  "mtgna" wrote in message
  News:glcr0a$KJ8$1@forums. Macromedia.com...
  > Hi
  >
  > I have problem when you try to add a VO to an ArrayCollection collection as follows.
  > My
  > last entry overrides all my previous entries in the table.
  >
  > model.selectedItem.date = dateInput.text;
  > model.selectedItem.accountno = accountnoInput.text;
  > model.selectedItem.debit = Number (debitInput.text).
  > model.selectedItem.credit = Number (creditInput.text).
  >
  > model.accountingdata.addItem (model.selectedItem);
  >
  > where
  > selecteditem is of type VO
  > accountingdata is collection ArrayCollection
  >
  >
  >
  > When I make a record of the first entry:
  > trace (model.accountingdata);
  > The result:
  > (Array) #0
  > [0] (com.accounting.superann.vo::DataVO) #1
  > accountno = "776001."
  > credit = 233
  > date = ' 01/01/1976.
  > flow = 222
  > id = 0
  >
  > When I do a trace for the second and third entries:
  >
  > (Array) #0
  > [0] (com.accounting.superann.vo::DataVO) #1
  > accountno = "776055.
  > credit = 2323
  > date = ' 03/03/2000 '.
  > flow = 2323
  > id = 0
  > online = false
  > [1] (com.accounting.superann.vo::DataVO) #1
  > [2] (com.accounting.superann.vo::DataVO) #1
  >
  > Could someone please provide an explanation/solution?
  >

  Looks like you have all the elements in the ArrayCollection pointing to collection
  the same object. You call new DataVO() each time you add a new VO
  to the Board?

• Problems of type of Page ASP.

  Hello world!!!
  
  I have some problems viewing .asp pages. When I bind in these types of pages (ASP), I get the coding instead of the normal screen display. Someone told me I need to install IIS and ASP.
  
  I've done the IIS, but I can see a way to do ASP.
  
  I would like someone to help me on this...
  
  
  Thank you...

  Thanks for your advisors...

  They were very helpful...

• display list of problems of type pull down menu with image on IE

  Hi all
  
  
  my list shows some reason on IE 6 no problem using FF
  
  That's how it shows up in IE 6
  [http://users.telenet.be/martijnke/OTN/menuIE01.JPG]
  
  When I click the first arrow (next to factuur) then it looks like this:
  [http://users.telenet.be/martijnke/OTN/menuIE02.JPG]
  
  When I then click any other arrow downwards is displayed correctly (which proves that my screen is wide enough):
  [http://users.telenet.be/martijnke/OTN/menuIE03.JPG]
  
  problem also occurs on apex.oracle.com
  
  my application uses theme 8. Orange and gray
  I use standard templates (no changes made) and standard images
  
  KR
  Martin

  Hello

  I don't know yet what actually happens, but it's even worse in IE7 (FF3.0.8 is ok). Take a look on: [http://apex.oracle.com/pls/otn/f?p=267:41] - I downloaded two images ("List1" and "List2"). You can see the text under the image actually appear, partially, twice - everything I've done between the two images is swap the order of the menu items. By clicking on the menu items does, finally, display the menu correctly (see "List3").

  So, the question seems to be something to do with the structure of the menu text. Try this:

  In the definition of the model from the list at the Start of the parameter list void model before lines, add in:

  <div style="float:left">
  

  and add at the end of the parameter list template void after lines, using:

  </div>
  

  This should wrap each full menu/sub-sub-menu option in a single DIV tag

  Andy

• Satellite Pro C660-1LR keyboard problem, there type y7 and 7 types y7.

  I plugged a USB keyboard and it works well. That means it's the internal keyboard hardware that is defective? How long is the warranty on these laptops?
  I removed the Y key, and there is nothing stuck in the origin of the problem.

  Post edited by: howieleem

  > I plugged a USB keyboard and it works well. That means it's the internal keyboard hardware that is defective?

  Yes, exactly
  You need new keyboard
  Ask Toshiba authorized service partner for a keyboard that you can also order a 2nd common hand keyboard from ebay or some online dealers

  standard warranty is valid for 12 months long...

• A problem with + type logitech keyboard and ipad air2

  When using type + keyboard and press the button of the globe the language do not change, it opens the change of instead.doesnt of research it opens instead of research.
  I have to open the keyboardglobe screen and change the language.

  I need to pass the languges while typing of document in pages, notices, etc.

  The button of your globe is probably hard wire to a shortcut that Apple uses more iOS.  Until the machine keyboard fixed that, you should be able to change the keyboard via Ctrl + space.

• Development of type float NAN of Python

  I am writing the Python 2.6 code that is interfaced with NI TestStand 4.2 via COM in Windows. I want to do a value "NAN" for a variable, but if I pass float('nan') , TestStand displays as IND . In other words, my code was something like:

  locals_prop_object.NewSubProperty(var_name, win32com.client.constants.PropValType_Number, False, "", 0)
  # Set the initial value to NaN--although it appears in TestStand as 'IND'.
  locals_prop_object.SetValNumber(var_name, 0, float('nan'))
  

  Apparently, TestStand distinguishes between floating point "IND" and "NAN" values According to TestStand help:

  • INDcorresponds to the signs of the NaN in Visual C++, while
  • NANcorresponds to QuietNaN

  It means that Python float('nan') is indeed a signalling NaN when passed through COM. However, from what I've read on the signaling NaN, apparently signaling NaN is somewhat "exotic" and quiet NaN is your "regular" NaN. So I have my doubts that Python would pass a signaling through COM NaN (how can I verify this?).

  So, any ideas how Python float ('nan') becomes TestStand "IND", the Python-> COM-> stream TestStand?

  Now I tried with NI TestStand. First of all I've tried:

  quiet_nan = struct.unpack(">d", "\x7f\xf8\x00\x00\x00\x00\x00\x01")[0]# Set the variable's value in TestStandlocals_prop_object.SetValNumber(var_name, 0, quiet_nan)
  

  But that always appeared in TestStand as IND . So I created a TestStand file with the value of the variables IND and NAN , and read values from Python. It turns out that TestStand NAN has the value FFFF000000000001 . According to summary graphics Kevin , it is a quiet NAN negative.

  Then, finally, it works (well that is probably specific to the platform; it works for me on Windows XP):

  # Make a NAN suitable for TestStandteststand_nan = struct.unpack(">d", "\xff\xff\x00\x00\x00\x00\x00\x01")[0]# Set the variable's value in TestStandlocals_prop_object.SetValNumber(var_name, 0, teststand_nan)
  

• How to record a data type float [64] table in a file?

  I have a table of type float64 [] data I want to save to a file.  I tried to use the ArrayToFile function, but he dislikes the type of data [] float64 .  I'm with LabWindows/CVI version 7.1.

  Why not use the data type double?

• SSH problem - unexpected Type of Message

  Hello

  I got this error message when I try to connect to my router (Version 12.2 (17r) S4). I refreshed instead of 1024 2048 bit RSA keys, but the message remains displayed.

  5 15:59:19.345 it IS: SSH2 0: type received unexpected mesg

  5 15:57:26.372 it IS: SSH2 0: type received unexpected mesg

  XXXX.xxxx #SH ip ssh

  Active SSH - version 1.99

  Authentication timeout: 120 seconds. New authentication attempts: 3

  XXXX.xxxx ssh #SH

  % No SSHv1 connections to the server running.

  % No SSHv2 server running connections

  Can someone help me?

  Thank you

  Hello

  Try to specify version 1 on the command line:

  -for IOS cli

  SSH - v 1 IP ADDRESS

  -for openssh

  SSH-1 IP ADDRESS

  Kind regards

• Problem with the floating linked clones and Persona

  Hello

  We run a build view Horizon 6.2.0 - 3005368.

  Just improved our VMware environment to 6.2 and installing an APEX 2800 PCoIP card on our guests.

  I had a pool of office dedicated clone bound for users.

  Now, I made a new image of master and made a new Automated Desktop Pool pool who are floating clone related.

  With the dedicated bound vmis, we place disc profiles of users etc are located.

  With the new pool, I'll use Persona. I followed this guide - http://terenceluk.blogspot.no/2012/10/configuring-roaming-profiles-with.html?showComment=1445933020356 and it works very well indeed, almost.

  For users of a trial, I can see that if something I save it to the desktop, it will be saved on the server of file \\fileserver\redirected$\%username%\Desktop

  When I use my user and try to even something on the desktop - it c:\%username%\Desktop

  I tried to reset, remove my user etc., but it's not. All the settings I made in the GPO - Computer Configuration-> administration-> classic administrative templates (ADM) models-> Configuration of the VMware View Agent-> Persona

  Management-> Folder Redirection

  But my users settings are only "local".

  How is it?

  This can be caused by an incorrect action or NTFS permissions on the redirection of folder/persona.

  She is also due if your user account has a profile on the parent whose linked clone desktops are created.

• Problems with Type in Photoshop 5.1

  Hello. After downloading a 30-day track of Captivate version, I noticed that my overview of the police was no longer available in Photoshop (although still visible in MS Word, Powerpoint and Captivate). In addition, the text tool became unusable in Photoshop 5.1. I have to display the dialoge box, "Could not complete your request because something prevented the text initializing engine"

  What to do?

  I downloaded all updates Photoshop 5.1. I checked the preview font in the preferences and also unchecked area overview of fonts in the preferences without result. I have all the fonts of the problem. I ran Malware and Windows Security Essentials and found no problem.

  What should do?

  Thanks for the tips.

  Thank you very much for your answer. I downloaded all of the downloads available for Photoshop 5.1 and then did nothing. Today, I pulled an old Photoshop file in the software, and previews of fonts were once again the text well tool worked.

  So I closed the file and created a new project. The text tool worked very well, like the preview of the fonts.

  Have no explanation to offer except the gods Adobe took pity on me and fixed it while I was sleeping.

  Thanks again for your reply and solution recommendations. Your thoughtful solutions were apparently so as I didn't even need to act on them! Good MoJo Silkrooster. Now please think about world peace please.

• Problem creating type on a path

  Hello, Beginner Photoshop CS5

  I'm trying to type a path, but each time that the text stops at the point in the attached screenshot, looks like a cross within a small circle. Where am I going wrong please?

  

  Thank you...

  "I guess that the test has the value" to right-align the text. with the active text layer can you command-drag (the text cursor should get a small black triangle on the left) the point to the right?

  

• a problem of displacement float windows

  I returned to 9.0.2 precisely because I need windows to compare photos, floating, but there is still a gremlin - I load 4 images that are to be photomerged, all float, then want to have because they will be in a final collage, so I can trim the edges of the Sun you get when you scan 1/4 on a large sheet and cut the excessive overlap photomerge doesn't handle well. What I often get, is that all of a sudden the window that I move fades out and then the nod to the fullscreen unfloated view, hiding all other. It seems to be especially prevalent with large images. The only recovery is hitting all float again and try again to move them.

  Sometimes I can 'baby' PES by the movement a little bit, and then another a little bit and slowly bring them in position, but it's a royal pain, is an understatement. Y at - it view fullscreen anyway can be disabled - I almost never use it. Or, is there another setting I missed to handle this?

  You need to look for the blue outline. When that appears, all you move will break. Just keep going until it disappears. As far as I KNOW, there is no way to change this behavior completely.

• Problem of type 2 SCD - does not not all valid records

  Hello
  
  I'm working on a mapping including a dimension of type 2 SCD. The loans for loading in the dimensione are ranked by date (asc). Essential changes, I want a story are changes when a user moves from one Department to the other.
  A sample of the records of entry looks like this
  
  Department-ID Dept_name User_ID, user_name effective_from
  49 sale 94 Andy 2010-05-26
  54 94 Andy 2010-07-10 marketing
  
  
  The dimension has a trigger on department_id.
  The mapping works fine when I hit the dimension with the folders one by one:
  1. run inserts the first record
  2 rund inserts the second recording
  
  result: I have 2 folders in my dimension with the correct values.
  
  If I want to insert two records in the same race of the mapping, only the first record appear in the dimension.
  
  No idea what I missed during the definition of the mapping?
  
  
  Thanks for your help
  Concerning
  Andy

  This version does not support SDC2 dimesnion loading with several historical records in the source table.
  But this feature doesn't appear in OWB 11 g R2, see OWB user guide

  http://download.Oracle.com/docs/CD/E11882_01/OWB.112/e10935/src_tgt_opers.htm#sthref2055

  Serach for "support several Loading story ' dimesnion property of operator

  Kind regards
  Oleg