Problem of volumes the reallocation
We are relatively new for ESX. We have a Nextra XIV subsystem connected to an ESX3.0 system thanks to an HBA adapter, which works fine, until we have done the following:
-Mapped a volume to the ESX using a utility XIV.
-Using a Virtual Center client, selected the ESX Storage/Configuration/system adapters / & lt; vmbha.x.x & gt; / Rescan. The volume appeared with success.
-Selected a virtual machine under ESX system and added a hard drive by using Edit Settings/Add/Hard Disk/Raw Device Mappings
-Choose the Windows operating system in the virtual machine and made a new analysis under disk management
So far so good. Everything seemed fine. Then we did the following:
-Non mapped the volume using the XIV and remapped another volume with a different capacity at the same location.
-Reread the ESX using VC system.
-Looking at the managed object provides information about the ESX, it seems that ESX recognizes the change in the capacity of the volume, but not the name. The name remained the name of the previous volume.
-Then, we restarted the ESX, to see if that could clear up.
-L'ESX is rebooted, but the virtual machine would not come up--gave an error "file not found". We noticed 2 thugs 0-ability of the virtual disks in the list of the VM in VC, so we removed the.
-Virtual machine now come with success.
Any clues why the ESX did not see the new volume name, and what we can do to remedy this scenario?
Experiences or tips would be very useful - thanks in advance.
Not mapped the volume using the XIV and remapped another volume with a different capacity at the same location.
Okay, I don't know this system, but using a 3rd third party tool (even if it's your SAN vendor) is not a good idea to make underlying changes to the file system. This step is probably where the trouble started. Why not map to its original location?
If you try to move files to do it between VMFS not in terms of SAN. I think that is where you should start.
For future reference you should area your readers and just change the ESX hosts have access to different file system of mapped drives. Because ESX once, it designates a VMFS volume he wrote a signature, in my understanding of your changed the ID of the disc where the VMFS is kept which is why I think it's broken.
Tags: VMware
Similar Questions
-
in my taskbar icon of volume, the internet icon & the power icon is no longer shows & I can click to get to show... they are inserted on the properties of the taskbar? How to solve this problem & these back?
Hi Jt5,
· You did any computer change?
· When is this last work fine?
· What operating system you have installed?
You can follow the article that is mentioned below:
System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
http://support.Microsoft.com/kb/945011
Reply back with the results
-
Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.
Last month, I had a series of blue screens. The problem points to the files Volsnap.sys or Classpnp.sys.
I have a Dell Precision T3500, running 64-bit Windows 7 Prof. The system is configured with RAID.
Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that. It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.
No idea on how to stop this would be really appreciated! Thank you
Hello
Results verified BlueScreenView WinDBG / DumpCHK.
make these problems worse. Uninstall it and run the removal tool to prevent
remains of troublecausing. The following recommendations to use during the test,
even better all the time.TrendMicro removal tool
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/------------------------------------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.==========================================================
The Bug_Checks were D1 (19 long happened if he should really
do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
Components of Windows, which means something else led in error.1. Uninstall TrendMicro as it has a role - is not enough to just disable
such that it will still load chunks of itself in memory.2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
or other corruption could be at stake. Classpnp.sys is the SCSI class system
dll checking and disk problems will affect the it. Run SFC/scannow, and then
Checkdisk (chkdsk /f r).Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=========================================================
Other troubleshooting methods:
BCCode: D1 0x000000D1
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
-
Problems with volume on a Windows 7 laptop
Hi, I have a laptop with windows 7 installed and I have a problem with my volume control.
My volume control acts as if someone or something has been pressed. For example I click on the icon to open the volume control and it shows that the volume is down. When I click and try to drag the control to the top, it will go up but immediately down as if someone he had the opposite effect. I tried to fix this on my computer nothing works. I tried to see if it has changed when I plugged my headphones but I always had the same problem. Open the volume mixer or enter the system of sounds does nothing either. I was wondering if anyone has had this problem before? I have never seen anything like this myself.
See you soon.
Have a read of this (rather long) post of similar sounding and see if the work of suggested corrections - http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/my-volume-slider-under-windows-7-keeps-going-down/2769853f-e412-4c4d-8b55-6885588a528f as some of the mentioned patches seem to have helped others. It seems quite a few possible interactions of audio RealTek to Audacity to Skype Manager, etc. and their related settings.
Hope this helps, if not, I'm sure that someone will bring a possible solution.
-
problem with playing the clash of clans
I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.
Hi Trinitygr,
Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.
Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
If an application you have installed unexpectedly closes, unresponsive, or does not openTake care!
-
Problem connecting to the server
Whenever I open the pictures, I get an alert that reads: 'there was a problem connecting to the server "my-server", which is another Mac on my network.
If I close the dialogue box, Photos keeps trying to connect and it appears again a few seconds later.
Does anyone have an idea as Photos is all this and how I can stop doing?
No idea - don't forget we can not see you if you have details
We do not yet have an idea what software you use or you use 'MyServer' for
What are the versions of the operating system and Photos do you use? What is your server? How are you connected to it?
LN
-
Problem connecting to the server after moving
Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.
I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?
I'm on Yosemite with MBR.
Can you connect using the new IP address?
-
There was a problem connecting to the server 'SERVER NAME' error guard appearing
There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network. I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server. This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them. No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success. I would appreciate all the advice really.
-
I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.
What version of Pages is running on your MBP?
What version of Mac OS X is running on your MBP?
The MBP is not iOS running.
-
Check error: there was a problem connecting to the server Apple ID
When I try to connect to my iTunes on my Windows laptop account it is said there is a problem connecting to the Apple ID server. This problem did not begin until 2 days. I have the latest version of iTunes and Windows.
What is the number of the version of iTunes?
For general advice, see troubleshooting problems with iTunes for Windows updates.
Start by missing error MSI.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
Leave a post by: turingtest2
On the PC, when connecting each device, it loads a separate driver. You can try this trick when you want to get iTunes recognizes the iPhone 6. Thanks to the user of the CSA turingtest2 for the tip.
Try the following:
Open Control Panel > Device Manager
Plug in your device
Locate Bus USB Controllers > Apple Mobile Device USB Driver.
It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.Right-click and select software update of the driver...
Click Browse my computer for driver software
Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\DriversClick on let me pick from a list of drivers for devices on my computer
Click on Apple Mobile Device USB Driver
Click Next, then close and exit the Device Manager
Leave a post by: ChrisJ4203
-
I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone. The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?
Probably there is debris and dust in the decision-making of the lightning. Serve with compressed gas canned (NEVER orally). If this doesn't help, try electronic contact cleaner has a q - Tip. Finally, take it to Apple.
-
HP P6110F desktop PC: win 10 update problem caused by the integrated audio system
I have a problem of Windows 10 with a HP Pavilion - PC Office HP P6110F, 64-bit, 6 GB. The motherboard is an IPIBL-LB/BENICIA-GL8E/G33/HP. The upgrade from Windows 7 to Windows 10 went ok but after the last reboot, the system would crash immediately with the message "system_thread_exception_not_handled. Windows should restart and it repeats. I replaced the NVIDIA driver to the latest version of the driver for the video card GeForce 8400GS, which is supposed to work with Win 10 (v341.74). The problem continues. Eventually, I discovered that if I disabled the integrated audio system then the problem disappears. The integrated audio card is an ALC888S Audio integrated Realtek HD Audio Manager, so I downloaded the latest driver from Realtek and installed. The same problem. I then decided to try the generic audio driver for Windows. The same problem. The only way I can run 10 win on this PC is to completely disable the audio adapter. Then, everything works fine (except for the audio of course). Has anyone go through this? Is there a solution before buying a sound card for a 6 year old PC?
BlueScreenView to watch mini dump. Problem caused by stdriver64.sys... This traced to SoundTap NCH software. Uninstalled SoundTap. Problem solved. The version of Win 7 of SoundTap is apparently not what you want in Windows 10. There is a version more recent SoundTap which may (or not) has solved this problem.
-
ProBook 6470b: problems after format the laptop and load the W7
Hi all
Here are my problems:
After 2 years using the laptop, I decided to format it and reboot with the disk W7 of professional origin.
At the same time, I exchanged the original SATA HDD with a new SSD in Kingston.
After you have installed all the drivers, it seems to work very well and much more quickly, but has two problems:
1 - the automatic update of Windows does not work. Only is looking for available updates, but it ends, even > 24 h research.
2. before reinstalling, my battery lasts for 5 hours. Now only 2 to 2.5 hours.
Does anyone have any ideas on how to solve my problems?
Thanks in advance.
Ernest
Good, glad it worked
Have you had any success with the BIOS settings? Contact HP support directly for this may be a good idea here.
Captain_WD.
-
Cannot install: problems connecting to the server
I have a problem when installing the new version of Skype, whenever I have install and starts to say there is a problem to connect to the server, download Skype alternative, and when I do it here it again when I install, can someone help me with this problem of server?
What Setup you're trying to open?
The only what you have to do is copy the Skype.exe and Login.cab files and paste these files the installation of Skype folder or even any new folder on your computer.
If you extracted all the files from the SkypeSetup_6.18.0.106.msi file, then you should be able to find the Skype.exe and Login.cab files in:
\SourceDir\Program Files\Skype\Phone\
-
Problem starting with the Tecra A8 and A9 models
We have about 20 or more, A8 and A9 Tecra notebooks and each has shown signs of the same problem again. If rebotting and netwrok cable is attached, so they will not start. Remove the cable and it is a normal startup.
The A8 has a motherboard replacement (problem existed before the replacement) and is still there now after the replacement. The MB is replaced mainly because the sound card was dead. All machines are running XP Pro OS. The A9 is a novelty. Would be - this driver issue or - this one of my favorite - an update from MS that has caused problems.> If reboot and the cable network is connected, then they will not start. Remove the cable and it is a normal startup.
Hmm that's strange.
However, I recommend that you check the BIOS settings, please ensure that LAN is not set as first boot device.
Also check if the BIOS has been updated to the StateSorry, but this is really rare and you should try universal workaround solutions that could help resolve this problem.
Maybe you are looking for
-
When I tag spam in Mail on my iMac as "Junk" e-mail program filter it after that. Mail on my iPhone does not work. I'm being bombarded by spammers to carpet and every day I label same 300 + emails as junk. Why Mail does not filter this kind of things
-
My gateway Tablet close without warning. Now more trouble...
My Gateway Tablet PC with windows XP stops without warning a few days ago. Now when I try to start, it doesn't do anything (the screen is black, fan works, power and light is on), it will start up, I log on, and then it crashes after a few minutes, o
-
Hello, my hard drive failed and I went to bestbuy and bought an ssd and installed. I bought a disc support only vista Home premium sp2 and installed. The team said geek look under my laptop guy and use the product key. I'm guessing I'm not alone in
-
HP8440P Elitebook: HP Elitebook 8440 Memory Upgrade
I bought a refurbished hp elitebook 8440p with 4 GB of memory but want to upgrade to 8 GB. I was sold 4 GB one another chip, pc3-10600 1333 mhz ddr3 sodimm, 8 tokens on the Board. By reading your forum, I discovered that the other memory location i
-
Disable fields without loss of information at the time!
Hello!Masters, assistance even of you, I have two fields (items) you want to be not changed by users in a given situation, they already have the same information, if I make a disable them lose this information at the time of the presentation, as I wa