VPN site to site access via a VPN client
Hi all
From our headquarters, we use a vpn site-to-site to connect to another site and it works great.
We have just configured the VPN client on our headquarters, remote VPN user can access the LAN in the seat.
We need the remote user can also access the LAN on the other site, but it does not work.
The site to site VPN and VPN client are configured on the same device, using even outside the interface.
Vpn client address pool is already included in the address that is allowed to go through the site to site VPN.
We would like to know if it is possible to access the site to site VPN, connecting to the VPN client and when the architecture is as above?
in the case where we use different devices and different internet connection for client VPN and site to site VPN, we can access the other site by the remote user VPN LAN?
Kind regards
Since you already have 10.13.0.0/16 in your site to site crypto ACL, which already includes the pool vpn so you need not configure it specifically.
You are missing the following command:
permit same-security-traffic intra-interface
ACL split tunnel should be standard ACL as follows:
access list ACL-CL-VPN allow 10.13.0.0 255.255.0.0
access list ACL-CL-VPN allow 10.14.0.0 255.255.248.0
Tags: Cisco Security
Similar Questions
-
VPN clients cannot access remote sites - PIX, routing problem?
I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)
Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.
Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.
Very good and works very well.
When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.
However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.
On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.
Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?
(Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)
with pix v6, no traffic is allowed to redirect to the same interface.
for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.
with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".
-
VPN clients are unable to access sites that are above a link from site to site
could someone please give me some direction, I have a set of vpn clients set up on a pix and I'm trying to give them access to a network that is connected via a link from a site that is set up on the same pix. so, basically, that it receives information from VPN client on the same interface, it built the tunnel from site to site, I've heard that's not possible is that the case. Or it can be fixed, I can provide diagrams and if necessary conf files.
You are right. You need a minimum of 7.0 for the feature you're looking for.
Kind regards
Arul
* Please note all useful messages *.
-
Help with 1921 SRI Easy VPN remote w / Easy VPN Site-to-Site access
I have two 1921 ISR routers configured with easy site to site VPN. I configured VPN each ISR ACL so that all networks on each site can communicate with the private networks of the other site. I have a 1921 SRI also configured as an easy VPN server.
Problem: when a remote user connects to the easy VPN server, the user can only access private networks on the site of the VPN server. I added the IP network that is used for remote users (i.e. the Easy VPN Server IP pool) to each VPN ACL 1921, but the remote user still cannot access other sites private network via the VPN site to another and vice versa.
Problem: I also have a problem with the easy VPN server, do not place a static host route in its routing table when he established a remote connection to the remote user and provides the remote user with an IP address of the VPN server's IP pool. The VPN server does not perform this task the first time the user connects. If the user disconnects and reconnects the router VPN Server does not have the static host route in its routing table for the new IP address given on the later connection.
Any help is appreciated.
THX,
Greg
Hello Greg,.
The ASAs require the "same-security-traffic intra-interface permits" to allow through traffic but routers allow traversed by default (is there no need for equivalent command).
Therefore, VPN clients can access A LAN but can't access the Remote LAN B on the Site to Site.
You have added the pool of the VPN client to the ACL for the interesting site to Site traffic.
You must also add the Remote LAN B to the ACL of tunneling split for VPN clients (assuming you are using split tunneling).
In other words, the VPN router configuration has for customers VPN should allow remote control B LAN in the traffic that is allowed for the VPN clients.
You can check the above and do the following test:
1. try to connect to the remote VPN the B. LAN client
2. check the "sh cry ips his" for the connection of the VPN client and check if there is a surveillance society being built between the pool and Remote LAN B.
Federico.
-
PIX - ASA, allow RA VPN clients to access servers at remote sites
I got L2L tunnels set up for a couple of remote sites (PIX) for several months now. We have a VPN concentrator, which will go EOL soon, so I'm working on moving our existing customers of RA our ASA. I have a problem, allowing RA clients access to a server to one of our remote sites. PIX and ASA (main site) relevant config is shown below. The error I get on the remote PIX when you try a ping on the VPN client is:
Group = 204.14. *. *, IP = 204.14. *. * cheque card static Crypto Card = outside_map, seq = 40, ACL does not proxy IDs src:172.16.200.0 dst: 172.16.26.0
The config:
Hand ASA config
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.1.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.22.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.200.0 inside_nat0_outbound allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.200.0 255.255.255.0
access extensive list ip 172.16.0.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.1.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.22.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
access extensive list ip 172.16.200.0 outside_cryptomap_60 allow 255.255.255.0 172.16.26.0 255.255.255.0
card crypto outside_map 60 match address outside_cryptomap_60
outside_map 60 set crypto map peer 24.97. *. *
card crypto outside_map 60 the transform-set ESP-3DES-MD5 value
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
=========================================
Remote config PIX
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.0.0 255.255.255.0
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.1.0 255.255.255.0
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.22.0 255.255.255.0
access extensive list ip 172.16.26.0 inside_nat0_outbound allow 255.255.255.0 172.16.200.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.0.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.1.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.22.0 255.255.255.0
access extensive list ip 172.16.26.0 outside_cryptomap_60 allow 255.255.255.0 172.16.200.0 255.255.255.0
card crypto outside_map 60 match address outside_cryptomap_60
peer set card crypto outside_map 60 204.14. *. *
card crypto outside_map 60 the transform-set ESP-3DES-MD5 value
outside_map interface card crypto outside
EDIT: Guess, I might add, remote site is 172.16.26.0/24 VLAN VPN is 172.16.200.0/24...
What you want to do is 'tunnelall', which is not split tunneling. This will still allow customers to join the main and remote site, but not allow them to access internet... unless you have expressly authorized to make a 'nat (outside)"or something. Your journey on the client will be, Secured route 0.0.0.0 0.0.0.0
attributes of group policy
Split-tunnel-policy tunnelall
Who is your current config, I don't see where the acl of walton is attributed to what to split tunnel?
-
AnyConnect VPN connection VPN site access to remote site
I need our VPN users to gain access to our remote site (Site to Site VPN), there is no problem to access the main site through the VPN. Crypto map sites have the VPN pool in the card encryption.
Any ideas?
Here is the main Site (ASA5520) config inside 192.168.50.0
crypto_vpn_remote-site access-list extended ip 192.168.50.0 allow 255.255.255.0 172.16.1.0 255.255.255.0
IP 192.168.99.0 allow Access-list extended site crypto_vpn_remote 255.255.255.0 172.16.1.0 255.255.255.0
inside_nat0_outbound to access extended list ip 192.168.50.0 allow 255.255.255.0 172.16.1.0 255.255.255.0
access extensive list ip 192.168.99.0 inside_nat0_outbound allow 255.255.255.0 172.16.1.0 255.255.255.0
Remote site (PIX 515E) inside 172.16.1.0
access-list crypto_vpn_main-site permit ip 172.16.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list crypto_vpn_main-site permit ip 172.16.1.0 255.255.255.0 192.168.99.0 255.255.255.0
access-list sheep permit ip 172.16.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list sheep permit ip 172.16.1.0 255.255.255.0 192.168.99.0 255.255.255.0
VPN (AnnyConnect) 192.168.99.0
On the main site, pls make sure that you have 'same-security-traffic permit intra-interface' active.
Also, if you have split tunnel configured, please also make sure that he understands the Remote LAN (172.16.1.0/24).
Hope that helps.
-
Site to site VPN with the VPN Client for both sites access?
Current situation:
Scenario is remote to the main office. Site IPSEC tunnel site (netscreen) remote in hand (506th pix). Cisco VPN Client of main office of remote access to users.
It's that everything works perfectly.
Problem:
Now we want remote users who connect to the seat to also be able to access resources in the remote offices.
This seems like it would be easy to implement, but I can't understand it.
Thanks in advance.
Rollo
----------
#10.10.10.0 = Network1
#10.10.11.0 = Network2
#172.16.1.0 = vpn pool
6.3 (4) version PIX
access-list 101 permit ip 10.10.10.0 255.255.255.0 172.16.1.0 255.255.255.0
access-list 101 permit ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0
splitTunnel 10.10.10.0 ip access list allow 255.255.255.0 any
splitTunnel ip 10.10.11.0 access list allow 255.255.255.0 any
access-list 115 permit ip any 172.16.1.0 255.255.255.0
access-list 116 allow ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0
IP access-list 116 allow all 10.10.11.0 255.255.255.0
access-list 116 allow ip 10.10.11.0 255.255.255.0 10.10.10.0 255.255.255.0
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside 209.x.x.x 255.255.255.224
IP address inside 10.10.10.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool 172.16.1.0 vpnpool - 172.16.1.50
Global 1 interface (outside)
Global (outside) 10 209.x.x.x 255.255.255.224
(Inside) NAT 0-list of access 101
NAT (inside) 10 10.10.10.0 255.255.255.0 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 209.x.x.x 1
Timeout xlate 01:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
crypto dynamic-map Clients_VPN-dynmap 10 transform-set RIGHT
35 Myset1 ipsec-isakmp crypto map
correspondence address 35 Myset1 map cryptographic 116
card crypto Myset1 35 counterpart set x.x.x.x
card crypto Myset1 35 set transform-set Myset1
Myset1 card crypto ipsec 90-isakmp dynamic dynmap Clients_VPN
client configuration address card crypto Myset1 launch
client configuration address card crypto Myset1 answer
interface Myset1 card crypto outside
ISAKMP allows outside
ISAKMP key * address x.x.x.x 255.255.255.255 netmask No.-xauth-no-config-mode
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 15
ISAKMP policy 15 3des encryption
ISAKMP policy 15 sha hash
15 1 ISAKMP policy group
ISAKMP duration strategy of life 15 28800
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 3600
part of pre authentication ISAKMP policy 25
encryption of ISAKMP policy 25
ISAKMP policy 25 md5 hash
25 2 ISAKMP policy group
ISAKMP living 25 3600 duration strategy
part of pre authentication ISAKMP policy 30
ISAKMP policy 30 aes-256 encryption
ISAKMP policy 30 sha hash
30 2 ISAKMP policy group
ISAKMP duration strategy of life 30 86400
vpngroup address vpnpool pool mygroup
vpngroup dns-server dns1 dns2 mygroup
vpngroup mygroup wins1 wins2 wins server
vpngroup mygroup by default-domain mydomain
vpngroup split splitTunnel tunnel mygroup
vpngroup idle time 64000 mygroup
mygroup vpngroup password *.
Telnet timeout 5
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Hi Rollo,
You can not be implemented for a simple reason, it is not supported on the version 6.x PIX. It relies on the PIX 7.x worm but 7.x is not supported on PIX 506. Thus, in a Word, it can be reached on a PIX 506. If you have an ASA, a PIX 515 running 7.x, a router or a hub as well, it can be reached.
HTH,
Please rate if this helps,
Kind regards
Kamal
-
PIX from Site to Site w / remote VPN Clients
I posted accidentally this question in the wrong forum earlier today. I couldn't find a way to move it or delete it, so I apologize for the duplication.
I set up a VPN site-to site between 2 Pix 506e. I have install the tunnle VPN using the VPN Wizard, and it seems to work fine.
However, I also have users that VPN directly in the PIX via PPTP or a Cisco VPN client. These users are not able to access resources that are on the other end of the VPN tunnel. It seems that map ACL that triggers sending in the tunnel of the packages is not be matched, but I was not able to understand how to make this work correctly.
PIX has a local subnet of 192.168.1.x/24. PIX B has a local subnet of 192.168.2.x/24. Traffic between these 2 subnets through the tunnel flow. However, when a person sets up a VPN on PIX B, they are also placed in the 192.168.2.x/24 subnet, but they are unable to access anything whatsoever in the 192.168.1.x/24 subnet. Is something like this? Config PIX B is attached. Any help you could offer would be greatly appreciated.
Thank you
-Steve
This is not possible with Pix and 6.3 version of the code.
If you are running 7.0 or higher on the Pix, so, yes it is possible. Please see the below URL for more configuration information. The feature you're looking for is called 'intra-interface.
In addition, 7.0 and above are not supported on Pix 501, 506, and 520.
Kind regards
Arul
* Please note all useful messages *.
-
Configure the Cisco VPN client to pass through the VPN site-to-site (GUI)
Hello
I say hat the chain and responses I've seen to achieve this goal have been great...
https://supportforums.Cisco.com/discussion/12234631/Cisco-ASA-5505-VPN-p...
and
https://supportforums.Cisco.com/document/12191196/AnyConnect-client-site...
My question is "we will get this configuration by using the graphical user interface for someone who is not notified about the command line?"
Thank you
Of course, all this can be configured via ASDM.
Looking at the second example you posted above, they point you first change:
ACL split of the tunnel for the AnyConnect customer
This Configuration > remote access VPN > network (Client) access > AnyConnect connection profile > (chose the profile and select Edit) > (choose "Manage" next to group policy) > Edit > advanced > Split Tunneling > ensure that the policy does not "Inherit" but rather "Tunnel network list below" > Unselect "Inherit" next to the network list, then 'manage '. Enter your networks you want in the GUI in this dialog box. Click OK all the way back to the main window ASDM and click on apply.
You then change:
Crypto ACL for the tunnel from Site to Site
To do this, go to Configuration > VPN Site-to_site > connection profiles > (choose your profile and select edit) > add the VPN client address pool to the list of local network between protect networks. Yet once, click OK all the way back to the main window ASDM and click on apply.
Then, allow the
ASA to redirect back on the same interface traffic it receives
.. is defined under Configuration > Device Setup > Interfaces. (check the box at the bottom of this screen). Click on apply
Finally, there is the NAT exemption. For which go to Configuration > firewall > rules NAT. Add a NAT device rule before rules network object with Interface Source out, Source address your address pool VPN, the Destination address to include remote subnets and Action is Static Source NAT type source address and destination address remaining as original (i.e. without NAT). Once on OK all the way back to the main window ASDM and click on apply. Save and test.
Good luck. Don't forget to note the brand and posts useful when your question is answered.
-
Between the VPN Client and VPN from Site to Site
Looking for an example of ASA 8.0 configuration allowing traffic between a Cisco VPN client host and destination of remote access connected via LAN/Site-to-Site tunnel. The remote access client and the tunnel site-to-site terminate on the same device of the SAA.
Thanks in advance.
-Rey
Hi Rey,
Here is an example of a config for what you are looking for.
I hope this helps.
PS: This uses GANYMEDE + for authentication, you can replace it with your authentication method.
Kind regards
Assia
-
VPN clients hairpining through a tunnel from site to site
I have a 8.2 (5) ASA 5510 in Site1 and a 8.2 (1) ASA 5505 Site2 they are configured with a tunnel from site to site.
Each site has VPN clients that connect and I would like to allow customers to access on both sides across the site-to-site tunnel servers.
I enabled same-security-traffic permit intra-interface I also added the remote networks to access list who made the split tunneling.
I think I'm doing something wrong with nat, but I don't know, any help would be greatly appreciated.
Site1 Clients1 (172.17.2.0/24) (10.0.254.0/24)
ASA Version 8.2 (5)
!
hostname site1
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
IP address site1 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.17.2.1 255.255.255.0
!
interface Ethernet0/2
Shutdown
nameif DMZ
security-level 0
IP 10.10.10.1 255.255.255.0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 0
IP 192.168.1.1 255.255.255.0
management only
!
passive FTP mode
permit same-security-traffic intra-interface
VPN - UK wide ip 172.17.2.0 access list allow 255.255.255.0 172.18.2.0 255.255.255.0
access extensive list ip 172.17.2.0 inside_nat0_outbound allow 255.255.255.0 192.168.123.0 255.255.255.0
access extensive list ip 172.17.2.0 inside_nat0_outbound allow 255.255.255.0 172.18.2.0 255.255.255.0
access extensive list ip 172.17.2.0 inside_nat0_outbound allow 255.255.255.0 10.0.254.0 255.255.255.0
Notice of inside_nat0_outbound access-list us Client Server UK
access extensive list ip 10.0.254.0 inside_nat0_outbound allow 255.255.255.0 172.18.2.0 255.255.255.0
access extensive list ip 192.168.123.0 inside_nat0_outbound allow 255.255.255.0 10.0.254.0 255.255.255.0
access extensive list ip 172.18.2.0 inside_nat0_outbound allow 255.255.255.0 10.0.254.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.17.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.18.2.0 255.255.255.0
Split_Tunnel_List list standard access allowed 192.168.123.0 255.255.255.0
Split_Tunnel_List of access note list UK VPN Client pool
Standard access list Split_Tunnel_List allow 172.255.2.0 255.255.255.0
outside-2 extended access list permit tcp any any eq smtp
outside-2 extended access list permit tcp any any eq 82
outside-2 extended access list permit tcp any any eq 81
outside-2 extended access list permit tcp everything any https eq
outside-2 extended access list permit tcp any any eq imap4
outside-2 extended access list permit tcp any any eq ldaps
outside-2 extended access list permit tcp any any eq pop3
outside-2 extended access list permit tcp any any eq www
outside-2 extended access list permit tcp any any eq 5963
outside-2 extended access list permit tcp any any eq ftp
outside-2 allowed extended access list tcp any any eq ftp - data
outside-2 extended access list permit tcp any any eq 3389
list of access outside-2 extended tcp refuse any any newspaper
2-outside access list extended deny ip any any newspaper
outside-2 extended access list deny udp any any newspaper
allow VPN CLIENTS to access extended list ip 172.17.2.0 255.255.255.0 10.0.254.0 255.255.255.0
allow VPN CLIENTS to access extended list ip 172.18.2.0 255.255.255.0 10.0.254.0 255.255.255.0
allow VPN CLIENTS to access extended list 192.168.123.0 ip 255.255.255.0 10.0.254.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.17.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.18.2.0 255.255.255.0
VPNClient_splittunnel list standard access allowed 192.168.123.0 255.255.255.0
VPNClient_splittunnel of access note list UK VPN Client pool
Standard access list VPNClient_splittunnel allow 172.255.2.0 255.255.255.0
VPN-Northwoods extended ip 172.17.2.0 access list allow 255.255.255.0 192.168.123.0 255.255.255.0
Note to outside_nat0_outbound to access list AD 01/05/13
access extensive list ip 10.0.254.0 outside_nat0_outbound allow 255.255.255.0 172.18.2.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
mask 10.0.254.25 - 10.0.254.45 255.255.255.0 IP local pool VPNUserPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (outside) 0-list of access outside_nat0_outbound
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 172.17.2.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp 172.17.2.200 smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 82 172.17.2.253 82 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 81 192.168.123.253 81 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface https 172.17.2.10 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 172.17.2.10 imap4 imap4 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ldaps 172.17.2.10 ldaps netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 172.17.2.10 pop3 pop3 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface www 172.17.2.19 www netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 5963 172.17.2.108 5963 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp 172.17.2.7 ftp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp - data 172.17.2.7 ftp - data netmask 255.255.255.255
static (inside, outside) tcp 3389 172.17.2.29 interface 3389 netmask 255.255.255.255
Access-group 2-outside-inside in external interface
Route outside 0.0.0.0 0.0.0.0 74.213.51.129 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server DCSI_Auth
AAA-server host 172.17.2.29 DCSI_Auth (inside)
key *.
AAA-server protocol nt AD
AAA-server AD (inside) host 172.16.1.211
AAA-server AD (inside) host 172.17.2.29
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-sha-hmac trans_set
Crypto ipsec transform-set VPN-Client-esp-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map DYN_MAP 20 the value reverse-road
Crypto-map dynamic outside_dyn_map 20 game of transformation-VPN-Client
address for correspondence outside_map 20 card crypto VPN - UK
card crypto outside_map 20 peers set site2
card crypto outside_map 20 transform-set trans_set
address for correspondence outside_map 30 card crypto VPN-Northwoods
card crypto outside_map 30 peers set othersite
trans_set outside_map 30 transform-set card crypto
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
crypto ISAKMP policy 20
preshared authentication
the Encryption
md5 hash
Group 2
lifetime 28800
Telnet timeout 5
SSH timeout 60
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal Clients_vpn group strategy
attributes of strategy of group Clients_vpn
value of server DNS 10.0.1.30
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPNClient_splittunnel
domain.local value by default-field
the authentication of the user activation
tunnel-group VPNclient type remote access
tunnel-group VPNclient-global attributes
address pool VPNUserPool
authentication-server-group DCSI_Auth
strategy - by default-group Clients_vpn
tunnel-group VPNclient ipsec-attributes
pre-shared key *.
tunnel-group othersite type ipsec-l2l
othersite group tunnel ipsec-attributes
pre-shared key *.
tunnel-group site2 type ipsec-l2l
tunnel-group ipsec-attributes site2
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
class-map imblock
match any
class-map p2p
game port tcp eq www
class-map P2P
game port tcp eq www
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
type of policy-map inspect im bine
parameters
msn - im yahoo im Protocol game
drop connection
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the pptp
type of policy-card inspect http P2P_HTTP
parameters
matches the query uri regex _default_gator
Journal of the drop connection
football match request uri regex _default_x-kazaa-network
Journal of the drop connection
Policy-map IM_P2P
class imblock
inspect the im bine
class P2P
inspect the http P2P_HTTP
!
global service-policy global_policy
IM_P2P service-policy inside interface
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:7717a11f5f2dce11af0f35cee7b4c893
: end
Site2 Clients1 (172.18.2.0/24) (172.255.2.0/24)
ASA Version 8.2 (1)
!
names of
name 172.18.2.2 UKserver
!
interface Vlan1
nameif inside
security-level 100
IP 172.18.2.1 255.255.255.0
!
interface Vlan2
nameif GuestWiFi
security-level 0
IP 192.168.2.1 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
IP address site2 255.255.255.252
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport trunk allowed vlan 1-2
switchport vlan trunk native 2
switchport mode trunk
Speed 100
full duplex
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic intra-interface
Access extensive list ip 172.18.2.0 USER_VPN allow 255.255.255.0 172.255.2.0 255.255.255.0
Access extensive list ip 172.17.2.0 USER_VPN allow 255.255.255.0 172.255.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.18.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.17.2.0 255.255.255.0
Standard access list VPNClient_splittunnel allow 172.255.2.0 255.255.255.0
Outside_2_Inside list extended access permit tcp any host otherhost eq smtp
Outside_2_Inside list extended access permit tcp any host otherhost eq pop3
Outside_2_Inside list extended access permit tcp any host otherhost eq imap4
Outside_2_Inside list extended access permit tcp any host otherhost eq www
Outside_2_Inside list extended access permit tcp any host otherhost eq https
Outside_2_Inside list extended access permit tcp any host otherhost eq ldap
Outside_2_Inside list extended access permit tcp any host otherhost eq ldaps
Outside_2_Inside list extended access permit tcp any host otherhost eq nntp
Outside_2_Inside list extended access permit tcp any host otherhost eq 135
Outside_2_Inside list extended access permit tcp any host otherhost eq 102
Outside_2_Inside list extended access permit tcp any host otherhost eq 390
Outside_2_Inside list extended access permit tcp any host otherhost eq 3268
Outside_2_Inside list extended access permit tcp any host otherhost eq 3269
Outside_2_Inside list extended access permit tcp any host otherhost eq 993
Outside_2_Inside list extended access permit tcp any host otherhost eq 995
Outside_2_Inside list extended access permit tcp any host otherhost eq 563
Outside_2_Inside list extended access permit tcp any host otherhost eq 465
Outside_2_Inside list extended access permit tcp any host otherhost eq 691
Outside_2_Inside list extended access permit tcp any host otherhost eq 6667
Outside_2_Inside list extended access permit tcp any host otherhost eq 994
Outside_2_Inside access list extended icmp permitted an echo
Outside_2_Inside list extended access permit icmp any any echo response
Outside_2_Inside list extended access permit tcp any host site2 eq smtp
Outside_2_Inside list extended access permit tcp any host site2 eq pop3
Outside_2_Inside list extended access permit tcp any host site2 eq imap4
Outside_2_Inside list extended access permit tcp any host site2 eq www
Outside_2_Inside list extended access permit tcp any host site2 eq https
Outside_2_Inside list extended access permit tcp any host site2 eq ldap
Outside_2_Inside list extended access permit tcp any host site2 eq ldaps
Outside_2_Inside list extended access permit tcp any host site2 eq nntp
Outside_2_Inside list extended access permit tcp any host site2 eq 135
Outside_2_Inside list extended access permit tcp any host site2 eq 102
Outside_2_Inside list extended access permit tcp any host site2 eq 390
Outside_2_Inside list extended access permit tcp any host site2 eq 3268
Outside_2_Inside list extended access permit tcp any host site2 eq 3269
Outside_2_Inside list extended access permit tcp any host site2 eq 993
Outside_2_Inside list extended access permit tcp any host site2 eq 995
Outside_2_Inside list extended access permit tcp any host site2 eq 563
Outside_2_Inside list extended access permit tcp any host site2 eq 465
Outside_2_Inside list extended access permit tcp any host site2 eq 691
Outside_2_Inside list extended access permit tcp any host site2 eq 6667
Outside_2_Inside list extended access permit tcp any host site2 eq 994
Outside_2_Inside list extended access permit tcp any SIP EQ host site2
Outside_2_Inside list extended access permit tcp any range of 8000-8005 host site2
Outside_2_Inside list extended access permit udp any range of 8000-8005 host site2
Outside_2_Inside list extended access udp allowed any SIP EQ host site2
Outside_2_Inside tcp extended access list deny any any newspaper
Outside_2_Inside list extended access deny udp any any newspaper
VPN - USA 172.255.2.0 ip extended access list allow 255.255.255.0 172.17.2.0 255.255.255.0
access extensive list ip 172.18.2.0 inside_nat0_outbound allow 255.255.255.0 172.17.2.0 255.255.255.0
access extensive list ip 172.18.2.0 inside_nat0_outbound allow 255.255.255.0 172.255.2.0 255.255.255.0
access extensive list ip 172.255.2.0 inside_nat0_outbound allow 255.255.255.0 172.17.2.0 255.255.255.0
Comment by Split_Tunnel_List-list of access networks to allow via VPN
Standard access list Split_Tunnel_List allow 172.18.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.17.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 172.255.2.0 255.255.255.0
Standard access list Split_Tunnel_List allow 10.0.254.0 255.255.255.0
pager lines 20
Enable logging
monitor debug logging
debug logging in buffered memory
asdm of logging of information
Debugging trace record
Within 1500 MTU
MTU 1500 GuestWiFi
Outside 1500 MTU
IP pool local ClientVPN 172.255.2.100 - 172.255.2.124
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 172.18.2.0 255.255.255.0
NAT (GuestWiFi) 2 192.168.2.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp smtp UKserver netmask 255.255.255.255
public static tcp (indoor, outdoor) UKserver netmask 255.255.255.255 pop3 pop3 interface
public static tcp (indoor, outdoor) interface imap4 imap4 netmask 255.255.255.255 UKserver
public static tcp (indoor, outdoor) interface www UKserver www netmask 255.255.255.255
public static tcp (indoor, outdoor) https UKserver netmask 255.255.255.255 https interface
public static tcp (indoor, outdoor) interface ldap UKserver ldap netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ldaps ldaps netmask 255.255.255.255 UKserver
public static tcp (indoor, outdoor) interface nntp nntp netmask 255.255.255.255 UKserver
public static 135 135 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 102 102 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 390 390 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 3268 3268 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 3269 3269 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static UKserver netmask 255.255.255.255 993 993 interface tcp (indoor, outdoor)
public static UKserver 995 netmask 255.255.255.255 995 interface tcp (indoor, outdoor)
public static 563 563 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 465 465 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 691 691 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 6667 UKserver 6667 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 994 994 UKserver netmask 255.255.255.255 interface tcp (indoor, outdoor)
Access-group Outside_2_Inside in interface outside
Route outside 0.0.0.0 0.0.0.0 87.224.93.53 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Ray of AAA-server vpn Protocol
AAA-server vpn (inside) host UKserver
key DCSI_vpn_Key07
the ssh LOCAL console AAA authentication
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp - esp-sha-hmac trans_set
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 transform-set trans_set
Crypto dynamic-map DYN_MAP 20 the value reverse-road
address for correspondence outside_map 20 card crypto VPN - USA
card crypto outside_map 20 peers set othersite2 site1
card crypto outside_map 20 transform-set trans_set
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
crypto ISAKMP policy 20
preshared authentication
the Encryption
md5 hash
Group 2
lifetime 28800
Telnet timeout 5
SSH timeout 25
Console timeout 0
dhcpd dns 8.8.8.8 UKserver
!
dhcpd address 172.18.2.100 - 172.18.2.149 inside
dhcpd allow inside
!
dhcpd address 192.168.2.50 - 192.168.2.74 GuestWiFi
enable GuestWiFi dhcpd
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
WebVPN
internal USER_VPN group policy
USER_VPN group policy attributes
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Split_Tunnel_List
the authentication of the user activation
tunnel-group othersite2 type ipsec-l2l
othersite2 group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group USER_VPN remote access
attributes global-tunnel-group USER_VPN
address pool ClientVPN
Authentication-server group (external vpn)
Group Policy - by default-USER_VPN
IPSec-attributes tunnel-group USER_VPN
pre-shared-key *.
tunnel-group site1 type ipsec-l2l
tunnel-group ipsec-attributes site1
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:d000c75c8864547dfabaf3652d81be71
: end
Hello
The output seems to say that traffic is indeed transmitted to connect VPN L2L
Can you PING from hosts on the network 172.18.2.0/24 to the hosts on the network 172.17.2.0/24?
Have you tried several different target hosts on the network you are trying to ping while might exclude us actual devices are not just meeting the specifications these PINGs?
-Jouni
-
Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)
Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).
Here is the presentation:
There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.
I was able to configure the Client VPN IPSec Site
(1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa
(2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.
But I was not able to make the tradiotional model Hairpinng to work in this scenario.
I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?
Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:
LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)
race-conf - Site VPN Customer normal work without internet access/split tunnel
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain cisco.campus.com
enable the encrypted password xxxxxxxxxxxxxx
XXXXXXXXXXXXXX encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside internet1
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface GigabitEthernet0/1
nameif outside internet2
security-level 0
IP address 2.2.2.2 255.255.255.224
!
interface GigabitEthernet0/2
nameif dmz interface
security-level 0
IP 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
IP 172.16.0.1 255.255.0.0
!
interface Management0/0
nameif CSC-MGMT
security-level 100
the IP 10.0.0.4 address 255.255.255.0
!
boot system Disk0: / asa821 - k8.bin
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain cisco.campus.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network cmps-lan
the object-group CSC - ip network
object-group network www-Interior
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
port udp-object-group service
object-group service ftp
object-group service ftp - data
object-group network csc1-ip
object-group service all-tcp-udp
access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3
access-list extended SCC-OUT permit ip host 10.0.0.5 everything
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp
list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3
access CAMPUS-wide LAN ip allowed list a whole
access-list CSC - acl note scan web and mail traffic
access-list CSC - acl extended permit tcp any any eq smtp
access-list CSC - acl extended permit tcp any any eq pop3
access-list CSC - acl note scan web and mail traffic
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3
access-list extended INTERNET2-IN permit ip any host 1.1.1.2
access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access list DNS-inspect extended permit tcp any any eq field
access list DNS-inspect extended permit udp any any eq field
access-list extended capin permit ip host 172.16.1.234 all
access-list extended capin permit ip host 172.16.1.52 all
access-list extended capin permit ip any host 172.16.1.52
Capin list extended access permit ip host 172.16.0.82 172.16.0.61
Capin list extended access permit ip host 172.16.0.61 172.16.0.82
access-list extended capout permit ip host 2.2.2.2 everything
access-list extended capout permit ip any host 2.2.2.2
Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Internet1-outside of MTU 1500
Internet2-outside of MTU 1500
interface-dmz MTU 1500
Campus-lan of MTU 1500
MTU 1500 CSC-MGMT
IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1
IP check path reverse interface internet2-outside
IP check path reverse interface interface-dmz
IP check path opposite campus-lan interface
IP check path reverse interface CSC-MGMT
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
interface of global (internet1-outside) 1
interface of global (internet2-outside) 1
NAT (campus-lan) 0-campus-lan_nat0_outbound access list
NAT (campus-lan) 1 0.0.0.0 0.0.0.0
NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
Access-group INTERNET2-IN interface internet1-outside
group-access INTERNET1-IN interface internet2-outside
group-access CAMPUS-LAN in campus-lan interface
CSC-OUT access-group in SCC-MGMT interface
Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1
Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
HTTP 1.2.2.2 255.255.255.255 internet2-outside
HTTP 1.2.2.2 255.255.255.255 internet1-outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
crypto internet2-outside_map outside internet2 network interface card
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit smoking
ISAKMP crypto enable internet2-outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.2 255.255.255.255 CSC-MGMT
Telnet 10.0.0.8 255.255.255.255 CSC-MGMT
Telnet timeout 5
SSH 1.2.3.3 255.255.255.240 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet2-outside
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal VPN_TG_1 group policy
VPN_TG_1 group policy attributes
Protocol-tunnel-VPN IPSec
username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx
privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx
username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx
username vpnuser1 attributes
VPN-group-policy VPN_TG_1
type tunnel-group VPN_TG_1 remote access
attributes global-tunnel-group VPN_TG_1
address vpnpool1 pool
Group Policy - by default-VPN_TG_1
IPSec-attributes tunnel-group VPN_TG_1
pre-shared-key *.
!
class-map cmap-DNS
matches the access list DNS-inspect
CCS-class class-map
corresponds to the CSC - acl access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
CCS category
CSC help
cmap-DNS class
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN
Please tell what to do here, to pin all of the traffic Internet from VPN Clients.
That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)
I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.
Thank you & best regards
MAXS
Hello
If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.
I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.
The command format is
packet-tracer intput tcp
That should tell what the SAA for this kind of package entering its "input" interface
Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)
-Jouni
-
VPN - PC (vpn client) problem-> router-> (site to site vpn)-> local network
Hello
is it possible to install?
I have a pc and I want to connect to the Remote LAN.
PC (using vpn client) - vpn (internet)---> ROUTER1 - a vpn (MPLS network)---> ROUTER2---> SERVER site
How can I connect to a remote server? Is there an easy way?
I did the configuration of the vpn client (I can connect ROUTER1 and access a LAN via vpn with 192.168.1.x), but I can't connect to the server, even if I set the subnet (192.168.1.x) under the access list of site to site vpn (access list for traffic that must pass between ROUTER1 and ROUTER2).
Please advise! Thanks in advance.
Looks like I've not well explained.
On ROUTER1
===================
1 ACL VNC_acl is used to split tunnel, so you should include IP server_NET it NOT vpn IP pool.
2 ACL najavorbel is used to set the lan lan traffic between ROUTER1 and ROUTER2, 2 you should inlcude
IP 192.168.133.0 allow 0.0.0.255 0.0.0.255
You must change the crypto ROUTER2 ACL of the minor or the najavorbel of the ACL
The other way to is to the client VPN NAT IP to a local area network lan IP ROUTER1, in this way, you don't need any changes on ROUTER2. But I have to take a look at your configuration to make the suggestion.
-
VPN site to site & outdoor on ASA 5520 VPN client
Hi, I'm jonathan rivero.
I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.
the executed show.
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 7esAUjZmKQSFDCZX encrypted password
names of
!
interface Ethernet0/0
nameif inside
security-level 100
address 172.16.3.2 IP 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 200.20.20.1 255.255.255.0
!
interface Ethernet0/1.1
VLAN 1
nameif outside1
security-level 0
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
object-group, net-LAN
object-network 172.16.0.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
object-group, NET / remote
object-network 172.16.100.0 255.255.255.0
object-network 172.16.101.0 255.255.255.0
object-network 172.16.102.0 255.255.255.0
object-network 172.16.103.0 255.255.255.0
object-group network net-poolvpn
object-network 192.168.11.0 255.255.255.0
access list outside nat extended permit ip net local group object all
access-list extended sheep allowed ip local object-group net object-group net / remote
access-list extended sheep allowed ip local object-group net net poolvpn object-group
access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group
pager lines 24
Within 1500 MTU
Outside 1500 MTU
outside1 MTU 1500
IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 100 burst-size 10
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 access list outside nat
Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1
Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
internal vpngroup1 group policy
attributes of the strategy of group vpngroup1
banner value +++ welcome to Cisco Systems 7.0. +++
value of 192.168.0.1 DNS server 192.168.1.1
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value splittun-vpngroup1
value by default-ad domain - domain.local
Split-dns value ad - domain.local
the address value ippool pools
username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15
tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared-key *.
type tunnel-group vpngroup1 remote access
tunnel-group vpngroup1 General-attributes
ippool address pool
Group Policy - by default-vpngroup1
vpngroup1 group of tunnel ipsec-attributes
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #sh run
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
VPNL2L interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared key ciscomy topology:
I try with the following links, but did not work
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml
Best regards...
"" I thing both the force of the SAA with the new road outside, why is that? ".
without the road ASA pushes traffic inward, by default.
In any case, this must have been a learning experience.
Hopefully, this has been no help.
Please rate, all the helful post.
Thank you
Rizwan Muhammed.
-
IPSec site to site VPN cisco VPN client routing problem and
Hello
I'm really stuck with the configuration of ipsec site to site vpn (hub to spoke, multiple rays) with cisco vpn remote client access to this vpn.
The problem is with remote access - cisco vpn client access - I can communicate with hub lan - but I need also communication of all lans speaks of the cisco vpn client.
There are on the shelves, there is no material used cisco - routers DLINK.
Someone told me that it is possible to use NAT to translate remote access IP-lan-HUB customers and thus allow communication - but I'm unable to set up and operate.
Can someone help me please?
Thank you
Peter
RAYS - not cisco devices / another provider
Cisco 1841 HSEC HUB:
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key x xx address no.-xauth
!
the group x crypto isakmp client configuration
x key
pool vpnclientpool
ACL 190
include-local-lan
!
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec transform-set esp-3des esp-sha-hmac 1cisco
!
Crypto-map dynamic dynmap 10
Set transform-set 1cisco
!
card crypto ETH0 client authentication list userauthen
card crypto isakmp authorization list groupauthor ETH0
client configuration address card crypto ETH0 answer
ETH0 1 ipsec-isakmp crypto map
set peer x
Set transform-set 1cisco
PFS group2 Set
match address 180
card ETH0 10-isakmp ipsec crypto dynamic dynmap
!
!
interface FastEthernet0/1
Description $ES_WAN$
card crypto ETH0
!
IP local pool vpnclientpool 192.168.200.100 192.168.200.150
!
!
overload of IP nat inside source list LOCAL interface FastEthernet0/1
!
IP access-list extended LOCAL
deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
deny ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
IP 192.168.7.0 allow 0.0.0.255 any
!
access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
!
How the DLINK has been configured for traffic between the site to site VPN subnets? You are able to add multiple remote subnets on DLINK? If you can, then you must add the pool of Client VPN subnet.
Alternatively, if you cannot add multiple subnet on DLINK router, you can change the pool of Client VPN 192.168.6.0/24, and on the crypto ACL between the site to site VPN, you must edit the 180 existing ACL
DE:
access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 180 allow ip 192.168.200.0 0.0.0.255 192.168.1.0 0.0.0.255
TO:
access-list 180 allow ip 192.168.6.0 0.0.1.255 192.168.1.0 0.0.0.255
Also change the ACL 190 split tunnel:
DE:
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255
access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.200.0 0.0.0.255
TO:
access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.6.0 0.0.0.255
access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.6.0 0.0.0.255
Finally, replace the remote subnet 192.168.7.0/255.255.255.0 192.168.6.0/255.255.254.0 DLINK.
Hope that helps.
Maybe you are looking for
-
Satellite P100 - 332 (PAGE) overheating
Dear Sir About 6 months ago I bought the Toshiba P100-332 (PAGE) with the intention to run several programs such as photoshop for my work and some (mainly counterstrike) games for entertainment.The laptop is equipped with a dual core clocked at 2.33
-
I have a Dell Dimension 2400 running windows XP - SP3
The green power light turns yellow and the computer shuts down.
-
New computer that is running Windows 7 does not recognize my external hard drive completely
I bought a new PC with windows 7. I use an external hard drive with USB to move the files from the old PC (XP) to the new PC. When I go to 'my computer' focus on the external hard drive storage devices is not displayed. When I go on my devices, the
-
Where to find and share pins
-
When I installed photoshop 14 originally, it automatically converted my last catalog version 12 but has not converted the remaining catalogues. It is best to restore my backup copy remaining catalogs? Do I need to have two versions of photoshop on?