Similar Questions

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• WPA and wpa2 on the same SSID

  Hello Experts!

  I have wpa and wpa2 on the same SSID available for two types of users?

  Kind regards

  Miguel

  Miguel,

  While you can activate both it is best to select only 1 of them, but if you choose to have active both, I recommend that configure you them as follows:

  WPA - TKIP only

  WPA2 - AES only

  Thank you

  Kayle

• Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use

  Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use.  Problem is that I'm not running anywhere.   I checked my task manager, and is not in the applications or processes.  I tried to restart my computer a couple of times, correctly and a hard reset as well and nothing works.  Google Chrome and Internet Explorer are the two works very well.  Help, please.

  Original title: loading Firefox problem

  Hello

  I suggest that you are looking for or post on the Forums of Firefox.

  http://forums.mozillazine.org/viewforum.php?f=38

  Don

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• Problem of airtime with the same SSID

  I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz.

  Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I don't have problem to play AirPlay on any device. I had the same SSID when so I can use wifi roaming without having to change the SSID whenever the other signal weakens.

  When I put two (router & AP) with the same SSID, Airplay icon will not be displayed? But if I put a different SSID to one of the two, airplay icon is back. Channels are on ch.1 (router) and ch.11 (AP). Someone knows how to set up?

  UPDATE:

  Disable NAT in fact access point the AirPlay icon always appear but he cannot yet play through my APR.

  * all updates *.

  12.4.3 iTunes

  Windows 10 updated, firewall offshore

  Marantz 1506 firmware update

  always put iPhone to update to the latest version

  The routers are also updated to its latest firmwares

  What I believe you are describing is a network expanded through repetition, the Apple TV does not work well with repeaters. Try a different configuration.

• Satellite R830-1GZ: ConfigFree Radar fails to display the networks without wire with the same SSID

  I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.

  However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.

  I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.

  Is there a utility round way this or another that correctly displays it available different SSID and strength.

  Thank you very much

  Bill

  > Is there a utility round way this or another that correctly displays it available different SSID and strength?

  As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.

  I found some useful Q / A ConfigFree regarding:
  [ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]

  Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
  http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• 2 with the same SSID E3200

  Hello

  I want to install the following in a new House and I am looking for your help.

  House has 2 floors. I want to install 2 E3200, one on each floor, but with the same SSID and password, etc. so internet connection / streaming throughout the word is flawless. Is this possible?

  Both floors have taken wall ready network and they all lead to the same modem/router, so all devices connected lead to the same network.

  Thanks in advance.

  Bonez

  PS. the two E3200 was last updated Firmware Version: 1.0.03

  1. If your modem is a router, you should consider implemented the two E3200 (i.e. as access points) and not as a router bridge mode. Chaining routers can cause various issues, including the offsets and disconnects. There is generally no reason chain routers in a home network, you probably want all interconnection.

  2. otherwise, if you want to use an E3200 as a router (for example because the modem/router don't provide some functionality of routing/firewall you want) you should put the modem/router mode "bridge" device It transformed into a simple modem, and you can then reconfigure your E3200 for your internet connection (for example PPPoE for DSL) or DHCP for cable. The first E3200 then functions as normal internet router. The second should still be used in bridge only mode.

  3. If your first router is 192.168.2.1 and the second was 192.168.2.200 and you connect through the second port of the internet router and you put not the second router mode bridge, you will get a working network. The second router works as a router and has the 192.168.2. * subnet identical IP on the internet port and the LAN side. It is cannot be routed. It would never work. If you connect two routers, LANs should not overlap (this is why you have to change the first router 192.168.2.1 IP, because your modem/router uses address of 192.168.1. *). If you define 192.168.3.1 as the second address IP LAN E3200 you can connect the internet port of the second to the first E3200 and you can use the second E3200 as router.

  4. However, if you run both as a router with different IP subnets (which is mandatory if the second operates as a router) you cannot set up a roaming network. A unique SSID is supposed to link to the same local network. A wireless client assumes that moving from one access point to another on the same SSID to connect to the same local network, that is, he can always use the same DHCP IP address and everything else looks the same on each access point. However, with two routers routing, you have two different and two IP subnets different local networks. So for roaming, is not possible.

  So, I recommend you:

  a. place if possible the modem/router to bridge fashion and use it as a simple modem only. Configure the first E3200 as internet router on LAN IP 192.168.1.1. Implement the second E3200 mode bridge on a static IP 192.168.1.2. Connect the internet port of the second to the first.

  b. If you need to keep the modem/router as a router on 192.168.1.1, put in place the two E3200 in Bridge mode and assign the first one address static IP 192.168.1.2 and the second a static IP address of 192.168.1.3. Use the internet ports for the connection.

  c. If you insist on chaining an E3200 as router to your modem/router, do the same configuration that (a.), but use 192.168.2.1 and 192.168.2.2 to the IP addresses of the first and the second.

  Whatever it is, you can configure a roaming with the settings wireless wireless network as described above.

• Must configure with the same SSID of the AP

  We are looking for the purchase of two Access Points to our new building.  We currently have at our old facility two end bottom of AP with two different SSIDs.  Manaully users simply switch between the two.  I would like to know how it would be difficult to set up it would not have users to manually switch as they traveled through the building.

  I have looked at Cisco AP below and I was wondering if she had the ability to do so.  Is there another hardware or software needed to put up something like that.

  Just to clarify I only need two AP and want things transperent to my users.  I want them to be able to walk the area covered to another area covered by the AP2 and AP1 and loose no matter what connection.  Here it's automatic for users do not have to do anything to move things.

  Any info anyone can provide to help me would be greatly appreceated.  Thanks in advance.

  Access point wireless Cisco Aironet 1140 AIR-LAP1141N-A-K9

  As I understand it, you can configure both with the same SSID settings and security and that they will be 'transparent' to switch to the other. It is if you do not use something like an IP phone that requires a quick transition between the two. In this case, you would need a controller.

• How can I have 2 email accounts open at the same time using the apple mail icon?

  How to open 2 e-mail accounts at the same time?

  Hello carroll12,

  Thank you for using communities of Apple Support.

  I see that you do not want to open two e-mail accounts at the same time using the Mail application. I understand perfectly. I have multiple e-mail accounts set up in my Mail application. I'm happy to help you with this.

  You can have more than one e-mail account set up in the Mail application. The first time you open Mail, it may prompt you to add an e-mail account (if you have not already done). Select an account type, and then enter your account information. To add another account, choose Mail > add an account, select an account type, and then enter your account information. Make sure that the Mail check box is selected for the account.

  If you have already both set in place, and I just want to be able to view both on the screen at the same time, open Mail, and then click file at the top.  From there, select the option for the new window of the observer.  This will open a new window where you can see each of the individual mailboxes on the same screen.

  Have an amazing day!

• How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).

• Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  When my Macbook Pro is on the WiFi and my iPhone 6 s + is on cell phone, I noticed that if I delete the photos within the program of Photos on my Mac they do not get deleted from my iPhone. However, a few hours later when I get home and check my phone, and I'm on Wifi for both devices, the photos have disappeared. Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  Thank you.

  Devices can be on different wifi networks.

  Your question is that the phone will not be synchronized using cellular data and will wait until it connects to a wifi network, but this can be any wifi network.

• Implementation of Airport extreme with the same SSID

  My House has very thick walls and so I run a Cat5 cable for a number of rooms and installed an Airport Extreme for everyone to create a local WiFi network.

  For the moment, each creates its own wi fi network which is very good for connecting phones, tablets and laptops but I'm trying to connect some SONOS devices and they are not find each other so not a link to the main controller of SONOS.

  SONOS support suggests that if I could get the extremes of the airport on the same SSID, which should help you because they would all be network extensions and so devices would be able to find each other.

  I tried making them all extensions of the network wi fi router but can't see not in the options when I select "Extend an existing network", although on my iPad, I can see wi fi network to the router where the Airport Extreme is so too, it is wired to the router would have thought it should be possible to make all the extensions of a single network.  Research in the community, it seems that the airport is unable to extend a wifi network not Apple, but I could at least get all the airports on the same SSID can help.  I also tried to set up airports so they all extend the network, but they do not see each other because they are too far away.

  I'm not an expert in network management, I understand bits having to solve problems earlier, but if there is there advice or suggestions of the community that would be great

  Thank you

  David

  You choose to extend a network when the incoming signal is wifi. What you need is a "mobile network". Simply connect each airport to the router by ethernet and network with the same SSID and password than the original. Reset the airports so that they put in place from the new so that they detect the arrangement and get into bridge mode - you do not want to provide the IP numbers, you want the home router to do and airports to pass.

  See this page and scroll down to "Roaming Network (Wi - Fi connected base stations)':"

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

• Hi whant to update the changed value to dishes of the same variable used in the entry. How to do thanks in advance

  Hi, I want to update the value out put of the same variable used in the entry. How to do thanks in advance

  ya I got it. using the property node (and if you select value) we can do. Thans for answer