problem on the screen

Similar Questions

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)

  I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate.  The iPhone does not accept my Apple ID.  He is looking for an address icloud.com.  I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck.  Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office).  Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen

  To be honest, I was going to pick up a new phone this week anyway.  My concern is now that I don't want to not suddenly faced with the same problem.  This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.

  It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.

  Thank you all for any help

  If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.

  If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.

• I have a problem, see the screen of my iPhone when you're wearing Polarized Sunglasses. Someone else?

  Someone else just to see their iPhone 6 or Air when you wear Polarized Sunglasses?  My screen seems to low intensity upright, I wear Polarized Sunglasses of Rx a lot.  S in Arizona.

  I had this problem with a screen of the device.  It is the effect of polarization lenses.  The only way for the clear screen had to take off the sunglasses - helping you if they are your Rx lenses.  I think you need to stick to the horizontal scenes to avoid the effect.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• I'm having a problem with the screen resolution cannot be superior to 800 x 600 pixels

  All this began after I plug an i9 phone to my pc to load

  later, to this day, when I turned on my pc screen resolution would not stay how I put it

  He wants to just go to 800 x 600 pixels.

  I ran microsoft security scan it found and deleted a virus java exploit cve 2010-4452

  but still having trouble with the screen resolution

  If the problem occurred after you plugged into your phone. I suggest to perform a restore of the system automatically, put it on a date 2 days before you had the problem. If this isn't the case, you can check the video card driver:

  Start > run > devmgmt.msc
  Check your video card driver or see if there are any missing drivers
  If its lack, then update or install the driver of your video card.
  I hope this helps you! Good luck.

• HP Compaq Presario CQ60-615DX: problems of the screen and the cursor

  Hi - I'm not a sophisticated computer user! This problem has been occurring for about a week - intermittently. When I move the screen of my laptop forward or backward - it turns off and I see no longer the desktop icons. It takes awhile to several push and pull to get things working again on the right. Second problem is this: when I use the mouse and place the cursor on the icon to open something - nothing happens. I can not click. I can't even move the mouse to make a reboot - I end up having to press the button and wait until it to power down. When I turn it back on - sometimes it is fine and other, the same thing happens. My battery is exhausted or do I here some real problems? Help would be appreciated. Thanks, LdyBGood

  LdyBGood

  Welcome to the Community Forum of HP.

  You certainly have a hardware problem.

  There are threads of connection - small wires that connect the display to the rest of the computer which can be crushed, loose or disconnected.  Damage or disconnect can happen anywhere: from one of the ends of the connection point on the map of the computer where all the components most lies along the son in the hinge area - where the wires could be crushed - at the other end of the wires where they connect to the components in the display screen, antennas, webcam microphone or radio, wireless, or other components.  This damage can occur at any time to any computer age.

  It's sad.

  If the problem is broken wires, the situation is not hopeless: the good news is that such problem is not generally expensive to correct is not a death knell for a healthy computer.  In other words, it may be useful to have the computer by a qualified professional and trust.

  You can call HP, or you can take the computer to the local House of reliable repair.  The problem can usually be quickly diagnosed by a qualifed technician once that he / she can see the computer.

  You should, while you can backup your data to an external location.

  You should, while you can, save your most sensitive to a second external location data - say a USB key so that you can - if you need it - put these data on another computer while this computer are fixed.

  If you have an account of cloud, it is one that you can back up your data.  If you have a SIN - and you know what it is, you can back up your data to that.  If you can afford to buy a small drive external backup of your E-store, you can use it.

  Dragon tips

  • If you decide to take your computer to a local store OR if you decide to send your computer for repair, remove your most personal data and critics of the computer.  Do not quibble about "it's hard to do," just get the data on the computer after you are sure it is saved.  Do not give foreigners access to your private data.  If you don't know what you're doing: a friend for you help with backups.
  • Don't be fooled a method of data backup.  A backup is not enough - a backup is like locking the front door of your House and leave the door open.

  You can always call HP for help.

  Know that you can call HP to organize the computer to send to HP for repair, regardless of the status of the guarantee.  There is an extra charge for the service.  HP will take good care of the computer and will organize the details with you when you call.

  Contact telephone support HP - USA-

  List of

  HP technical support / Customer Service phone numbers - some English Speaking countries

  Including the United Kingdom and Europe

  Guarantee required - us. and Canada

  USA - contact HP / / Self-Help-Email - Chat

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Problem with the screen when it rains it is wet

  Hello world
  Any of you had a similar problem like me?
  I noticed this before, when the screen is wet or raining on her is pushing screen by itself.
  At first I thought it's because problem of protector of screen, but 3 days ago when it rained, I wasn't able to use my phone at all, and I needed to call so consider screen protector, but the problem was still there.
  Like water proof phone that this should not happen.
  Is there a problem like that with my phone only?
  Should I inform Sony about this and send for repair?

  When the device comes into contact with water, the touchscreen misbehave. It's normal, that's why you have app touch block to take pictures under water.

• problem with the screen savers

  OK, I have windows 7 Home premium. Now, when I download a screen saver. I end up getting an error message. And I want to know how I can solve this problem. Or if I can fix it. I'll post the error here. Thanks in advance.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: nfsRainbowAbstraction.scr
  Application version: 4.0.0.0
  Application timestamp: 4b0041b4
  Fault Module name: Flash32_14_0_0_145.ocx
  Fault Module Version: 14.0.0.145
  Timestamp of Module error: 53aa18ec
  Exception code: c0000005
  Exception offset: 001fbb14
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: dcdb
  More information 2: dcdbdf2902fa28773ce6a482d2712212
  3 more information: 9da6
  Additional information 4: 9da622ac40664012d59c7c96b3c0c476

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Flash screen saver function?  Could be some screensaver you downloaded was made for a version MUCH earlier third Adobe Flash Player and/or the operating system.

  When I tried to go to the web page where you can get this screen saver (nfsRainbowAbstraction.scr) - my eSet NOD32 antivirus and Malwarebytes warn me constantly bad things even. Heh

  In other words - if work of other screen savers (i.e. - those of integrated)-the issue is either with (in this case) the Adobe Flash Player this screensaver uses or the screen saver itself.  Communicate with those who have made the screen saver.

• Display problem on the screen

  Hello

  I set my screen resolution of 1440 x 900, which is recommended, but have these problems:
  -Some programs starts, but doent open window
  -the mouse disappears outside on the left side of the screen
  -aero stops working
  I had this problem before, but it fixed. Yesterday, I got an update from Windows update, and then the problems were back.
  Help, please!
   
  Original title: Screen Resolution

  Now everything is ok.

  I have uninstalled several small programs that I never use.

  It could be a program called flplayer who got an update not so long ago.

  Thank you!

  Klaus

• BlackBerry Smartphones having HUGE problem with the screen

  Please help me people... My flipberry went completely crazy...
  I ' l try to explain the problem with as much detail as I can remember...
  Since last week or both internal as external screen my phone acted crazy...
  for the start of a few days, the problem started with the internal display will red sometimes, or show the half of the screen with stripes of colors... I thought it was a passing phase...
  but after a few days, the screen went completely black... both screens external and internal... until this time, as I ran the firmware 4.6.0.222
  so that day I sat down and wiped my phone completely and loaded the latest firmware 4.6.0.236... in order to completely black screens are returned to the way they were... sometimes ok, sometimes showing abstract things and weird colors...

  and even today both screens went completely black... so I'm currently trying to get back to the 4.6.0.180 version as recommended by t-mobile...

  and I have not dropped my phone once again since I bought it 4 months ago... need help

  usually the phone will come with a free warranty of one year.  The best thing I can suggest is to return to the top of any data you left phone and bring it back for a replacement or sent it to be repaired because it seems to me that your phone is defective.

• Problem with the screen blend mode

  Hello

  I noticed that the screen on my Illlustrator a blend mode problem, he does not let the color when the shape is black...

  Here is a screen for the explanation:

  

  (overlay = screen in french)

  I don't understand what is happening... ID do something wrong?

  EDIT: I use Illustrator CC (2014)

  What document color mode?

  In CMYK mode, you might want to try a (very) rich black.

• Problem on the screen when a manager of the size has changed

  I add a handler in a form and a button in the Manager, I need to change the height of Manager, as 100px to 200, I use sublayout method to reset the width and height and the height of Manager is changed, but screen doesnot rearrange, the Manager will cover the fields below, how let the re-presentation of the screen, which can help me Thank you.

  yourManager.updateLayout)

• Problem with the Screen class

  Hello

  Please anyone suggest me that I had made an application for blackberry strom 9500 when I got extends the class of devices back button screen is disabled automatically. and when I extends the class screen it works correctly.

  I don't think that the class screen itself has the feature to close the screen when you press the ESC by default. If it isn't and you want to use it, you can pass the DEFAULT_CLOSE style to it.

  public class MyScreen extends Screen {     MyScreen(Manager m)     {          super(m, Screen.DEFAULT_CLOSE);      }
  
      protected void sublayout(int width, int height) {        // Add sublayout logic    }}
  

  Documentation: http://www.blackberry.com/developers/docs/5.0.0api/net/rim/device/api/ui/Screen.html#DEFAULT_CLOSE

  Is there a reason that you are using the Screen as opposed to screen or full screen class?