Problem on the weblogic server application deployment

Nice day

I had one job the next on Oracle WebCenter forum, Thread but it seems the problem with weblogic. weblogic Server deployment:

*Re: cannot record contained in the Complutense University of MADRID through servlet depolyed on weblogic server

All of the Suggestions.

Concerning

Dear,
The problem is resolved. It's a delicate question.

The type of method in my jsp page was 'post'

Tags: Fusion Middleware

Similar Questions

Problem on Weblogic Server application deployment [unsupported major.minor version 51.0]

Hello
I had a problem where I can't deploy my project on the Weblogic Server. I can run the model project, but the problem comes when I try to run the Viewcontroller project.
The illustration below shows the error caused.
PS: I use jdev 11g, and I reinstalled the JDK [1.7.0_71] and [g 11], the Jdev all over again without success.
Any help is welcome because I can't keep my job without this problem.
Thank you all!

Thanks Shay,

I could solve this change the java_home in weblogic configurations

Problem with Integrated Weblogic Server in JDeveloper

Hello
I use JDeveloper version: 11.1.1.7
I am facing problem with the Weblogic Server integrated into JDeveloper.
When I start the server, the log shows as follows:
Using the 7101 port *.
D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
.
.
Memory of JAVA arguments: - Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
.
Start mode of WLS = development
.
CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_ 1/lib/Ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\ fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar
.
PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin; C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ ADE\bin; C:\Windows\System32; C:\Windows; C:\windows\System32\Wbem; C:\windows\System32\WindowsPowerShell\v1.0\; C:\Program Widcomm logiciels\. C:\Program Widcomm Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin. C:\Program Files (x 86) \Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8
.
***************************************************
* To start WebLogic Server, use a username and *.
* password assigned to an administrator-level user. For *.
* server administration, using the WebLogic Server *.
* the http://hostname:port\console console *.
***************************************************
from weblogic with the Java version:
Java version "1.6.0_51".
Java (TM) SE Runtime Environment (build 1.6.0_51 - b31)
Java for 64-bit Server VM (build 20, 51 - b02, mixed mode)
WLS starting with line:
"D:\Java\JDK16~1.0_5\bin\java-client-Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy - agentlib: jdwp = transport = dt_socket, server = o, address =-Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks 49879 - Dhttp.proxyHost = www-proxy.idc.oracle.com-Dhttp.proxyPort=80"-Dhttp.nonProxyHosts = localhost | 127.0.0.1 | rnaguban - in '-Dhttps.proxyHost = www-proxy.idc.oracle.com-Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts = localhost | 127.0.0.1 | rnaguban -»-Doracle.jdeveloper.adrs=true-Dweblogic.nodemanager.ServiceEnabled=true-Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM-Dweblogic.log.Log4jLoggingEnabled_uim=true-Dlog4j.configuration_ = UIM loggingconfig.xml-Duim.logging.watchdog.timer=5000-Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp-Dweblogic.management.discover.retries=6-DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig-Dsun.lang.ClassLoader.allowArraySyntax=true - XX : - UseSSE42Intrinsics - DUSE_JAAS = faux - Djps.policystore.hybrid.mode=false-Djps.combiner.optimize.lazyeval=true-Djps.combiner.optimize=true-Djps.authz=ACC - Xverify : aucun-da-Dplatform.home=D:\fmwps6\WLSERV~1.3-Dwls.home=D:\fmwps6\WLSERV~1.3\server-Dweblogic.home=D:\fmwps6\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=D:\fmwps6\ORACLE~1-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~ 1.93\DEFAUL ~ 1- Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=D:\fmwps6\ JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\ tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
Listening to dt_socket to address transport: 49879
The debugger is connected to the local process.
< 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-int├⌐grit├⌐ for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 16 August 2013 19:19:44 IST > < Info > < WebLogicServer > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 20, 51 - b02 Sun Microsystems Inc. >
< 16 August 2013 19:19:44 IST > < Info > < management > < BEA-141107 > < Version: WebLogic Server temporary fix for BUG13114768 Sat Jan 21 16:14:44 IST 2012
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >
< 16 August 2013 19:19:47 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 16 August 2013 19:19:47 IST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
< 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
< 16 August 2013 19:19:47 IST > < opinion > < Log Management > < BEA-170019 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
< 16 August 2013 19:19:56 IST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log. >
August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info
INFO: Sent Notification of mapping object config reloaded
August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info
INFO: Sent Notification of mapping object config reloaded
< 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
< 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 16 August 2013 19:20:20 IST > < WARNING > < JDBC > < BEA-001552 > < data source for logging last resource (LLR) InventoryTxDataSource does not work when it is a participant in a global transaction that spans several WebLogic Server instances because JDBC remote support is disabled. LLR will work in one configurations. >
< 16 August 2013 19:20:22 IST > < WARNING > < JDBC > < BEA-001110 > < no table test didn't put in place for the pool "SDM-commsRepository" Connections will be tested. >
< 16 August 2013 19:20:39 IST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".
< 16 August 2013 19:20:58 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the application UIMCMWSAdapter is not versioned. >
< 16 August 2013 19:21:11 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the oracle.communications.inventory application is not versioned. >
< TableBuilder > < _buildSchema > metric "webcache:request_filter_denied_stats" table has no key column. It will not be seen.
< TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Information ' has no key column. It will not be seen.
< TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Performance ' has no key column. It will not be seen.
< TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Response ' has no key column. It will not be seen.
< TableBuilder > < _buildSchema > metric table "reports: Reports_Servlet_Response ' has no key column. It will not be seen.
< TableBuilder > < _buildSchema > metric table "reports: Remote_Bridge_Elements ' has no key column. It will not be seen.
< ConfigurationUtil > < getProperties > was not able to load runtime - poms.properties
< 16 August 2013 19:21:52 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login www.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.Inet6AddressImpl.lookupAllHostAddr (Native Method)
in java.net.InetAddress$ 1.lookupAllHostAddr(InetAddress.java:876)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)
at java.net.InetAddress.getAllByName0(InetAddress.java:1180)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
Truncated. check the log file full stacktrace
>
< 16 August 2013 19:21:53 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login svn.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.InetAddress.getAllByName0(InetAddress.java:1184)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
at java.net.InetAddress.getAllByName(InetAddress.java:1046)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)
Truncated. check the log file full stacktrace
>
< LoggerHelper > < Journal > cannot map non-serializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.
< AdfDiagnosticsJarsVersionDumpImpl > < dumpVersionInfo > version jars discharge path: D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv
< FeatureUtils > < _resolveFeatures > Ignoring feature-dependency on the function "AdfDvtCommon". There is no such feature.
ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.
On the road: ADF library non-ADFJspResourceProvider after deployment
Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 223
< 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
< 16 August 2013 19:22:08 IST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
< 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
< 16 August 2013 19:22:09 IST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 14.96.8.250:7101 for iiop, t3, ldap, snmp, http protocols. >
< 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
< 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
< 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
But it does not list the server while deploying the application.
I don't see the problem to my office network. But I have this problem when I work from my home.
Ideally, it should show the following lines after the server is started:
DefaultServer startup time: 195467 ms.
DefaultServer began.
This is not the case if I start the server without network.
How can I solve this problem?
Thank you
Ravi

I see some message on a proxy. Have you checked that you can use the proxy on your network?

If this isn't the case, you must disable the proxy.

Timo

How to deploy the project to my weblogic Server Application?

How to deploy the project in my weblogic Server Application? Wouldn't be great if I copy the folder of the project to the root of the ACE?
Also, how should I call Javascript context help assuming the project deployed to Weblogic As.
I use Robohelp 10.
Thanks in advance.

Hello

You generate to help and then you copy the output generated on the server.

For sensitivity to context, which is output are you using? Try the following

pages for more information:
- http://www.Grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm
- http://www.wvanweelden.EU/article-category/context-sensitivity
Take a bow

Willam

where the application is stored in the weblogic file after deployment?

Hello, I am beginner of WebLogic Server12C.
I deployed a project of console gui war. However, I can't find where the expansion.
I can find. "" appmergengen folder "and"_WL_user folder"in the tmp folder.
They exploded Archive Directory. However, they are in the tmp folder.
So could you tell me where the application is stored in the weblogic file after deployment?
I find no specific document of the oralce site documents.

The application that you deploy to weblogic may be placed under a folder tmp only under appropriate weblogic server instance i.e. Managed server / Server Admin

It will be cached in the exploded only form and not in WAR or archived form.

Hope that clarifies!

Thank you

Vijaya

access to the weblogic Server console problem

Hi all
We have a problem of access to the weblogic Server console page.
We have fresh installed the Enterprise Manager Cloud control 12 c and we can access the MS pages without problems.
When trying to connect to the weblogic Server (https:// < our_server >: 7101/console) with Firefox, IE11 or if the page is loading and loading without showing the login page.
But when trying to connect to this address with a place (elinks) browser on the unix machine we'll see the first page immediately.
Any ideas?
Thank you
Michael

Hi all

We solved the problem in another way: we opened the ports http access.

Because issues were security settings in Internet Explorer.

Thank you

Michael

Error when starting the weblogic Server
Hi all

I get the following error when starting the weblogic server (10.3.5.0). I couldn't access the EM.

< 9 July 2012 19:00:23 IST > < error > < org.apache.beehive.netui.pageflow.internal.AdapterManager > < BEA-000000 > < ServletContainerAdapter manager not initialized successfully. >

java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException

at oracle.sysman.eml.app.EMDClientInitializer.setHttpConnectionTimeout(EMDClientInitializer.java:97)

at oracle.sysman.eml.app.EMDClientInitializer.init(EMDClientInitializer.java:85)

at oracle.sysman.emSDK.svc.ServiceUtil.initService(ServiceUtil.java:94)

at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:432)

to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)

at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)

at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)

at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)

at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)

to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)

at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)

at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException

at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)

at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)

at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)

at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)

at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)

... more than 40

PostInstallConfigIntegration:oracle_ias_farm target auth check is performed.

< 9 July 2012 19:00:49 IST > < WARNING > < HTTP > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.

java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException

at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:1035)

to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)

at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)

Truncated. check the log file full stacktrace

Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException

at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)

at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)

at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)

at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)

at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

Truncated. check the log file full stacktrace

>

< 9 July 2012 19:00:49 IST > < WARNING > < HTTP > < BEA-101162 > < oracle.sysman.eml.app.ContextInitializer listener has not defined by user: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException.

java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException

at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:1242)

to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:482)

at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)

Truncated. check the log file full stacktrace

Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException

at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)

at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)

at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)

at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

Truncated. check the log file full stacktrace

>

< 9 July 2012 19:00:49 IST > < error > < hats > < BEA-149231 > < cannot create the activation to true for the em application state '.

weblogic.application.ModuleException:

at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)

at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)

to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

Truncated. check the log file full stacktrace

Caused by: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException

at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)

at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)

at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)

How to solve this problem. Pls suggest me.

Kind regards
Deena.
Copy the file http_client.jar in $ORACLE_HOME/Yes/jlib to $DOMAIN_HOME/lib. Also check if the classpath has been defined for this under $DOMAIN_HOME/bin/setDomainEnv.sh jar file

https://forums.Oracle.com/forums/thread.jspa?MessageID=10200685

Run the event at the start of the Weblogic Server

Hi all
I want to run some events at the start of the weblogic server.

What the version u use?

One way is

ServletContextListener

A better way to implement a class of application startup is to use the servlet context listener. He listens to the start and stop application events by implementing the methods contextInitialized() and contextDestroyed(). You can configure the listener in your web.xml () file, or even use the @WebServletContextListener annotation.

/ public class StartupListener implements javax.servlet.ServletContextListener {}

....

{} public void contextInitialized (dry ServletContextEvent)

....

}

{} public void contextDestroyed (dry ServletContextEvent)

....

}

}

Downside again; There is a context per "web application" per Java Virtual Machine. You would then have to manage cluster problems yourself. But positive on this subject is that you don't have to worry about that whether the external call, as this could occur with startup servlets. But it is portable and can be used on any Java EE server.

If you use version 12. You can use

Another way to use ApplicationListener. You can 4 event to capture it...

See this http://docs.oracle.com/cd/E24329_01/web.1211/e24368/lifecycle.htm#i1058406

I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

Hi Shubham,

You receive an error message when you try to use the Apps in Windows 8?

Exactly how have you connected to the computer (Microsoft Account or Local account)?

follow these steps to solve the app suggested you nuisance.

Method 1:

Run applications troubleshooting

I suggest you to download and run the troubleshooter modern UI App.

http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

Method 2:

I suggest you follow the steps in the article. Here is the link for your reference.

What to do if you have problems with a soft

http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

Method 3:

I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

a. click on thegear box in the upper right corner in Internet Explorer.

b. click onTools and then click Internet Options.

c. click on theConnections tab, and then click LAN settings.

d. Uncheckuse a proxy server for your LAN .

e. clickOk.

Hope the helps of information provided.

Cannot access the weblogic Server console.

Hello
In my windows server 2012 I created the virtual machine using the Hyper-V Manager.
In this virtual machine, I installed the weblogic Server 10.3.6. The ip address of the virtual machine is 192.168.1.9.
In my virtual machine using localhost I can able to access the console. But when I try to access the console to another computer that has windows 7, cannot able to access the console.

Check if the AdminServer is listening on all addresses to link or not?

Can you try to set an IP address to your AdminServer as following in your "$DOMAIN_HOME/config/config.xml", and then try again
```
    AdminServer
    
      false
    
    7001
    true
    192.168.1.9   
```
Still, if you face any problem, then it might be a firewall problem.

Please, try the following on the remote computer to see if the port is accessible from the other box or not:

From your windows 7 computer customer trying to see if this port is available or not on this IP address
```
telnet  192.168.1.9   7001
```
Also several times the IPv6 configuration can cause this problem, where can you try to start your WebLogic using the following JVM option:
```
-Djava.net.preferIPv4Stack=true
```

problem with oracle11g weblogic server (10.3.6) silent install
Hi all

I try to install server WL via silent mode.
The silent.xml I use is the following

<? XML version = "1.0" encoding = "UTF-8"? >
<! "- silent install option--mode = silent - silent_xml="/u01/app/wlogic/sil/silent.xml "-->
<? XML version = "1.0" encoding = "UTF-8"? >
< bea-Installer >
< input-fields >
< name value = "BEAHOME" value = "/ u01/app/wlogic/sil" / >
"< name value ="WLS_INSTALL_DIR"value="/u01/app/wlogic/sil/wlserver_10.3 "/ >
< value name = "COMPONENT_PATHS".
value = "Server/Core WebLogic application server |" WebLogic Server
/ Administration console. Upgrade and the WebLogic Server Configuration Wizard.
Framework | Server HTTP Pub - Sub WebLogic Server/Web 2.0 | WebLogic Server/WebLogic
JDBC drivers. WebLogic Server/third party drivers JDBC | WebLogic Server
/ WebLogic Server clients. WebLogic Server/WebLogic Web Server Plugins
| WebLogic Server/UDDI and Xquery support. Examples of WebLogic Server/Server"/ >
< name value = "INSTALL_NODE_MANAGER_SERVICE" value = "no" / >
< name value = "INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value = "yes" / >
<!--
"< value name ="LOCAL_JVMS"value="/usr/java/jdk1.7.0_07 "/ >
->
< / entry-fields >
< / bea-Installer >

Installation returns a failure code "null."
I use generic Setup and installed successfully through the console and GUI mode.
The OS is Red Hat Enterprise Linux 5.4 (32 bit on machine VWare).
I also tried on Windows 7.

I am at my wits end and any help would be appreciated.

Thanks in advance

Jitendra

PS: - I'm new here and that is why any forum policy may have been violated by me is unintentional.
Jitendra,

When you perform the installation by default, there is no need to specify the list of products at silent.xml. I use the text depending .cmd file (you can convert this to .sh) and silent.xml for install for quite awhile and it works well.

Silent.cmd
-------------
REM run the installer in silent mode
off @echo
wls1035_oepe111172_win32.exe - mode = silent-silent_xml=C:\softwaredownload\silent.xml-log=C:\softwaredownload\products_silent.log
@rem return an exit code to indicate success or failure of the installation
define exit_code = %ERRORLEVEL%

@echo.
@echo Exitcode = exit_code % %
@echo.
@echo exit Code key
@echo ---------------
@echo 0 = installation completed successfully
@echo - 1 = installation failed due to a fatal error
@echo - 2 = installation failed due to an internal XML parsing error
@echo.

Silent.Xml
-------------

Thank you

Laurent Mathieu
http://toyork.blogspot.ca

I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

I installed AVG 9.0 and now I get the MSN Explorer pop next message.
You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

Sure. Analysis of your e-mail anti-virus program:
- Can slow to receive and send messages, or even fail.
- Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
- Is not necessary. If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.
Here are a few web pages accurately:

Why you don't need your anti-virus program to scan your e-mail
The other threat email: the Corruption of files in Outlook Express
Why some antivirus software can change the settings in e-mail programs
Email scanning - advantages and disadvantages

error message "there is a communication problem with the web server."

I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

Hi, Mayhem15,

See if this troubleshooting help. It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

How to troubleshoot possible causes of Internet connection problems in Windows XP

http://support.Microsoft.com/kb/314095

Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

{D63B10C5-BB46-4990-A94F-E40B9D520160}

and APPID

{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

Anyone has an idea why I get this error?
Walt

Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

From another forum, although it applies to a different application, same principle:

1. open Regedit.
2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
3. right-click on it and select authorization.
4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
5. apply a full control.
6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
7 right-click on it and select authorization.
8. click on Advance and change the owner to administrators.
9. click on the box that will appear below the line owner.
10. click on apply and grant full control to the administrators.
11. close all tabs and navigate to the administration tool.
12. open component services.
13. click on the computer, click my computer, and then click DCOM.
14 find the corresponding service that appears on the display of the error.
15. right-click on it, and then click Properties.
16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
17. check enable local.

Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

CLSID:

{D63B10C5-BB46-4990-A94F-E40B9D520160}

and APPID

{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet while deploying the integrated WebLogic Server Application

Hi team,
A lot of time I faced this problem, but today want discussed with you people please suggest me what files are get damaged or that bad so I'm not able to deploy this Application in Server integrated Weblogic himself.
I have download the sample from the link below and open it in the version 11.1.2.3.0 for Jdeveloper and weblogic Server integrated version is
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011
Java version:
1.6.0_24
Name of the operating system:
Windows 7 (6.1)
link to download the sample:
https://docs.Oracle.com/CD/E18941_01/tutorials/jdtut_11r2_83/jdtut_11r2_83.html
It opens directly the sample in Jdeveloper without converting the project and executing the Application, I get the below error:
[11: 01:19]-deployment began. ----
[11: 01:19] the target platform's (Weblogic 10.3).
[11: 01:22] recovery of the existing application information
[11: 01:22] analysis of the dependence running...
[11: 01:23] deployment 2 profiles...
[11: 01:25] wrote on the Web for C:\Users\IBM_ADMIN\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\o.j2ee\drs\ADFSkinSample\ViewControllerWebApp.war application Module
[11: 01:27] wrote the Module Enterprise Application to C:\Users\IBM_ADMIN\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\o.j2ee\drs\ADFSkinSample
[11: 01:27] Application deployment...
< 4 February 2016 11:01:29 IST > < error > < HTTP > < BEA-101371 > < there was a failure during the processing of annotations for application C:\Users\IBM_ADMIN\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\o.j2ee\drs\ADFSkinSample\ViewControllerWebApp.war. Please make sure that annotations are valid. The error is javax.faces.webapp.FacesServlet >
< 4 February 2016 11:01:29 IST > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1454563887423 'for task ' 0'. Error is: "weblogic.application.ModuleException: could not load the webapp: ' ADFSecuritySample-ViewController-context-root" "
weblogic.application.ModuleException: cannot load the webapp: "ADFSecuritySample-ViewController-context-root".
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. check the log file full stacktrace
Caused by: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. check the log file full stacktrace
>
< 4 February 2016 11:01:29 IST > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy the task of application "ADFSkinSample" >.
< 4 February 2016 11:01:29 IST > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
weblogic.application.ModuleException: cannot load the webapp: "ADFSecuritySample-ViewController-context-root".
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. check the log file full stacktrace
Caused by: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. check the log file full stacktrace
>
[11: 01:29] undeployment.
[11: 01:29] - incomplete deployment.
[11: 01:29] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
# Cannot run application ADFSkinSample due to the deployment on IntegratedWebLogicServer error.
[ADFSkinSample application stopped and cancelled Server Instance IntegratedWebLogicServer]
Manager of the < logger > < error > ServletContainerAdapter not initialized successfully.
Please notify.
Thanks and greetings
Sanjeev

Hi Timo,

I checked and found the question actually JSF library file is missing from my case because of who he is in error, I joined the library and its working for me as well. in any case thanks for your update.

Thank you

Sanjeev

Problem on the weblogic server application deployment

Similar Questions

Maybe you are looking for