Problem reading data ascii properly

Similar Questions

• Problem reading data via the Bluetooth Serial Port

  My request is meant to connect with a PC via Bluetooth.

  The PC runs a simple server that reads a string from the BlackBerry UTF and writes a UTF string in response.

  DataInputStream istream = connection.openDataInputStream();DataOutputStream ostream = connection.openDataOutputStream();
  
  System.out.print(istream.readUTF());
  
  ostream.writeUTF("Hello client");ostream.flush();
  
  ostream.close();istream.close();
  

  The sound written BlackBerry pin and reads the answer.

  DataInputStream istream = connection.openDataInputStream();        DataOutputStream ostream = connection.openDataOutputStream();ostream.writeUTF(Integer.toString(DeviceInfo.getDeviceId(), 16));ostream.flush();
  
  _rtf.insert(istream.readUTF());
  
  ostream.close();istream.close();
  

  The server reads and prints the PIN successfully, but the client raise EOFException at readUTF().

  What could be wrong?

  Solved. The server side must not empty its output stream.

• Reading codes ascii serial port and their trace

  Hello

  I am trying to build a VI that reads data (ascii values) of the serial port.

  I am trying to build a Phonocardiogram wireless. I have a microphone that acquires the heart sounds. These signals is amplified and sent to an A/D converter to digitize it. the digital signal are sent to a base unit. UNTV signals received by the base unit must be sent to a computer (via a serial port to display).

  I would like to build a VI to draw ascii data received through the serial port.

  I would like to draw these values so that the plot resembles an analog signal (the one I had before an A/D converter).

  Can someone give me help?

  Thanks in advance...

  HII

• Problem loading swf which reads data from a local file

  Hello

  Using flex with an online project, I load a swf file, which reads data in a xml file (it works fine if I open it with flash player)

  I do a very simple test:

  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "
  layout = "absolute".
  minWidth = "955" = "600" minHeight
  >
  < mx:SWFLoader id = "swfloader" source="data/player.swf"/ >
  < / mx:Application >

  Result is that player.swf is unable to read the xml file (error: #2044 Error: ioError unsupported: text = Error #2032: error of flow.) URL: enonce.xml).

  I do the same test with a project of AIR, and it works very well!

  This also works if I put the xml file directly to the same level as my compiled (in bin-debug for example) application.

  I think it's a path problem, but I do not know how to configure it.

  Is there a way to solve the problem?

  Thank you very much!

  Olivier

  You need to change the code in the SWF file you load.  If the SWF file is not

  properly designed, it can not be loaded into other SWFs.

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• Problem reading text file

  CVI programmer for several years, but it has been awhile. Trying to read in a text file that displays fine in say Notepad. The first line of text in the file is:

  All temperatures in ° F.

  If I use the scan function, say:

  public static char cdum [2048];

  ScanFile (DataFile, "%s > %s", cdum); I get these results:

  cdum [0] is - 2

  cdum [1] is 65 (which is the ASCII character 'A')

  The rest of the cdum is all zeros.

  In a hex editor in decimal display grouped by bytes, the line is:

  0 255 254 65 0 108 0 108 0 32 0 116 0 101 0 109 0 112... as the display looks like

  ybA.l.l.. t.e.m.p.e.r.a.t.u.r.e.s.. i.n.. °. F....

  So I get the scan function is to see the start character, then by pulling the 65 and placing in the location cdum [1], then strikes the character 0 and leaves the function of scan as she found an end of line. Trying to read in the entire line and the subsequent data float line, but is not serious, I can understand that our after I get over the initial problem above.

  Can someone help me with this? I have no problem reading in ordinary text files, but this one is as it is grouped in words rather than in bytes. Have you tried a bunch of different Scan function modifiers source and target [xt0, w #, etc.], but nothing seems to work.

  Data file attached.

  Thank you-

  Scott

  Hello

  I downloaded your file, it is opened in Excel because of its extension and the settings on my computer. I then wanted to save it as a text file normal to see in Notepad and read with a simple C program. In doing so, Excel told me: some features in your workbook may be lost if you save it in Unicode text.

  This is consistent with your observation of 16-bit data.

  LabWindows/CVI, unfortunately, does not support the Unicode character set and functions of the library operated at only 8-bit characters.

  So I would say to convert your file to 8-bit characters; You can also support the pursuit of the Unicode support in CVI here

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Message - there is a problem reading this document (57)

  Does anyone else have this problem?

  Purchased version of Windows 32-bit version of Acrobat XI update will not install properly or work.

  First message of error information is according to the title after the first red screen that appears only once.

  Second information error message is to check the operation failed.

  2 downloads, 3 installs and repairs 2 produce the same result.

  Adobe Australia called three times on 1800614863 but only automated selections 322323 and promised transfer.

  Call 0901, first time.

  All calls placed on hold two first has expired.

  31 minutes in the third got a response from a man in India.

  In response to my question:

  Are reports of problems to install receivers purchased upgrade versions of Acrobat Pro XI?

  The answer was no.

  He took the details of the messages and offered to help him, but I refused.

  I bought and used all the upgrades Acrobat Pro 6.

  Complete installation attempted.

  Is done on a clean installation of Windows XP SP3 on an OQO02 with the only other program installed Office 2007 SBE.

  Post edited by: OQOroger in order to take account of the inability to connect to the Adobe Australia seller. Also Adobe site cannot stay on the Australia but returned to the USA. $A282 price paid. The USA buyer only pay $US199 (A191.57 of dollars at the current exchange rate). Account credit card already debited for purchase made yesterday. Corrected 'under' changed subject line 'was '.

  Post edited by: OQOroger corrected the price paid and the amount of currency conversion show additional paid by Australians to support 'local' (of India). Added "- Message" to the title to make it less cryptic.

  Post edited by: OQOroger Typical installation configuration are same problems except "There was a problem reading this document (57). window does not appear. First window showing and asking for acceptance of the terms of use has no lower section when there is no way to accept these terms except to close this window first displayed (check the window appears) and then restart the program when the lower panel is displayed.

  I was asked by the customer service Adobe to install Adobe Acrobat Pro XI using my download existing AcrobatPro_11_Web_WWMUI.exe, creation Date: 20/11/2012 22:05, size: 501 MB, under a newly created account (Adobe) after uninstalling and using Adobe Reader and Adobe Acrobat cleanup tool, AdbeArCleaner.exe program, File Version: 1.0.0.0, created : 04/05/2012 20:05, size: 1. 95 MB.

  Exactly the same problems and found reports. Same message posted on the Support Portal Adobe customer.

• Error message - problem reading disc on Satellite

  I wonder if anyone can help. Was a virus on my laptop satellite scan to home (don't remember the model) 2 days ago, when the screen is blue and it was a mistake long message means the laptop has encountered a problem and stops.

  After that 2 hours, that the cell had not yet arrested so disconnected from the electrical network and removed the battery. To try to restart the computer, an error message pops up saying - CTRL + ALT + DELETE to restart problem reading disk. When I made the order it seemed be restart but then returned to the original statement of CTRL + ALT + DELETE. Tried again and amel and can't stand up boot.

  Someone had this problem before?

  Hello

  It seems that it's not possible access to the HARD drive or it is not possible to read the data on the HARD drive.
  I don't know why it happens, but first of all, you should check the boot sequence in the BIOS. If everything shows ok, so you should try to start form the OS cd and check if it is possible to install the new OS.
  If this is not possible if the HARD drive has a fault and you need to replace.

• "Could not read data" when you try to print from Android

  Hello. I have a printer HP Officejet 6700 Premium, which is connected via ePrint/HP connected to my Google account so that I can print from my Google devices (Cloud Print). While this works very well when printing from my laptop (29 Chrome on Ubuntu 13.04), it does not when printing my Nexus 10 (Android 4.3) or my Galaxy Nexus (CyanogenMod 10.1.3). I tried printing both outside and inside the network on which the printer is on, but whenever I get "could not read data" in the Cloud Print dialog box. It seems that Cloud Print knows that the printer exists, since it is on the list, but it cannot communicate with the printer. Any way to solve this problem? He's good enough additional features only on my previous printer, who died of old age.

  It seems to me that the question is in fact Cloud Print related. Here is the support page: https://support.google.com/cloudprint/?rd=1

  Remember that Google Cloud Print is still in beta phase. Good luck tomslominski.

• HP Pavilion X 2: HP Pavilion XP cannot read data from USB DVDs

  We bought a HP 10-ND200ND (HP pavilion X 2) in the Mediamarkt and tried to install Microsoft Office from a DVD via a DVD USB Samsung player.  This was not possible. According to Support Mediamarkt this product is a Tablet and so cannot read data DVD´s. Only General to play music. To buy a laptop computer for this application. The operating system is Windows 10 (32 bit). Is that correct. Please advice.

  Hi Banhien, the cause is known. I have seen other comments on the HP forum and concluded that the reader needs more power than is available through the USB connector of. I added a hub that can provide power to its connectors USB, HP X 2, by car and the problem has been resolved! It was noted that the mini USB is also more powerful and with the type of adapter USB USB C it might also work, but I did not test this, because I do not have such an adapter. It's odd that such a mini can provide more power. It is surprising that the HP Pavilion X 2 does not have a powerful USB. But the problem is solved. Thanks for your response! Best regards, wiely

• Satellite L30-134 PSL33E: CD/DVD player can't read data CD

  I bought my laptop (Satellite L30-134 PSL33E) 4 months ago and I had no problem with the optical drive of my Satellite. But yesterday, I discovered that my drive is no longer can read data CDs.

  I created a CD with the Toshiba ToDisc utility which contained MP3s. The CD works fine on another computer but when I try to play them on this computer Windows laptop tells me that the CD is blank and asks me if I want to save data.

  It doesn't have this problem with the DVD, I can read and write perfectly. My optical drive is a CARPET * a DVD-RAM UJ - 841S. Windows says I have the latest driver for it (5.1.2535.0) but it says it's from 2001 (?) in the properties under the selected hardware.

  Help, please!

  Hello

  It is not easy to say what the problem is here. If you have time please check THIS document.

  Support Bulletin 98081245 CD burning: suggestions and troubleshooting. ‘

• nvstor64 error - failure of HARD drive to read data

  Backup and restore system is unable to complete - after investigation, about an hour after the backup operation to the system event log records a large number of errors in nvstor64 - "failed to read data from the HARD drive" and the abandonment of the backup operation.  After investigation, I found that the nvstor64 replaced the windows driver update disk drivers HARD during a computer video card.  After many contacts with support from nvidia and further consideration, the problem is reduced to the State of the offence alleged in the second hard drive backup (Seagate 1 TB Baraccuda - development since 2/2011).  When you run the HP disk HARD diagnosis on this drive, it does not hard "SMART short self-test" step with the error message "fails first LBA 45511183".

  Here's my question.  Run the chkdsk BACK on this disc utility passes - no bad sectors.   The HARD drive is visible in the operating system and appears to be fully accessible.  I moved 100 GB of files from the disc to others in the network with no apparent problems.  This really works test by the "SMART short self-test?  This is a 'false positive' test failed?

  Paul

  Pavilion p6210f

  Windows 7 64 bit

  6 GB of system memory

  C: WD 1 TB 7200 RPM HARD DRIVE

  F: drive HARD Seagate 1 TB 7200 RPM

  Hello smithdp,
  
  The SMART test tests in-depth hard disk. Here's the Wikipedia record for the short trial (they can explain better than me).
  http://goo.GL/XYCvm.
  Short
  Check electrical and mechanical performance as well as the disk read performance. Electric tests could include a test of memory buffer RAM, a read/write circuits test or a test of the read/write head elements. Mechanical test includes seeking and servo on the data track. Scans small parts of the drive surface (area is provider-specific and there is a time limit on the test). Checks the list of areas that may be read errors in waiting. (Usually less than two minutes.)
  
  Having said that it is not perfect, because no test is, it could be bad, or it could be on-site. Sometimes the SMART test can give a warning, but the drive will not fail for another month + is just a 'heads up '.
  
  Now, with your error in particular LBA is logical block address. The error you are getting is that there is a block (45511183) that the test has detected an error on.

• CAN read data using NI-XNET

  I was playing around with the new NI XNET drivers read CAN data and I need some experts advise on this topic. In the frame API, I remember to be able to check that if there is data on the queue of read before reading, with Xnet, I have not found this option. XNET use playback function that will read the entire queue without worrying if the data is present.

  This causes me a problem, because I'm constantly calling loop playback function, the data are written to a table of images, then the table will be empty for the next iteration because the reading queue was empty during the second reading.

  How can I continually read data from the queue of reading without accidental my output table?

  I tried the survey/Deque method, but it works well for me. Is someone can you please tell me what is the best practice for continuously reading the CAN data and treatment using drivers XNET?

  Thank you

  Sam

  Looks like you want to use with your berries shift registers. Discover this Subvi, which is part of the expedition OR XNET examples. You can find examples from the Finder example under help > find examples.

  Apart from converting it the image into a string, the additions loop the string to an array and use the shift registers to pass the array in the iterations of the loop.

  Is that what you're looking for?

• Simulation read data file (*.) (DAT) by using the worksheet (file reading eror - zeros)

  Dear OR community,

  IM pretty new in LabVIEW, so I have a few broblems with reading the data.

  I take a screenshot and mark a problem like part - A and part b below:

  

  The description of the goal:

  I do a mathematical simulation, using the old software whitch exporting results as shown in 1... DAT file, as it shown in the picture (Notepad).

  First of all I need not read these data then I need to draw the graph XY.

  Description of the problem:

  I created a LabVIEW program and im using a funciont reading of spreadsheet per section B - but when im trying to read data im getting all zeros...

  so I can't identify my problem... What is the problem?

  I try different file to read its Case_test_working.txt and everything is good with this data but when im trying to read *. DAT file zeros is array...

  I tried to use seperator different symbols, also try to imort data to exel then export to *.scv, *.txt formats, but the performance was the same as that indicated in part-A.

  Whenever I get zeros, but not a results as in *. DAT or another file format exported with the same data.

  Please be respectifull and understand that im still newbie in labview but I think its excellent software of filtering of the analysis of data and calculations, so I want to master this software for my future use.

  Respectfully,.
  Tomas E