Problem resolution/view

Similar Questions

• Problems with views. When no data I have to delete and recreate it

  Hi all.

  I have a problem with views. From time to time I can't see the data from the query, and I have to file the notice and then create it again, after that it works.

  Any idea?

  Best regards

  Hello.

  The benefits of joining is correct.

• USB problems with view 5.3

  I have problems with view on an Atrust W100 5.3 zero client attempts to use a Magtek USB card.  When I plug the blow of the card into a USB port and the test with the notebook, the device works, but when I try to slip something in QuickBooks POS there are missing characters and the card is not recognized.  I contacted MagTek and they pointed me to a download that I can run and slow the flow of data entry, however when I try to run it it is unable to recognize any USB device.  Is there anything I can do to get this MagTek card reader to work with the view 5.3?

  Thank you

  Looks like you're not actually redirecting the USB device, and instead it is considered a local keyboard to the zero client, with the keystrokes that results from being sent all over the office. Teradici have a tech support article detailing how to make USB devices which, by default, are kept up the:

  https://TechSupport.Teradici.com/ICS/support/KBAnswer.asp?questionID=616

• Problems with view 4.5 and PCOIP screen resolution.

  I know this question has been asked before, but I have yet to find a solid solution. The last activity that I saw on this was in October 2010, so I thought I would like to start over rather than resurrecting an old thread. Please see below the description of the problem.

  We have a number of XP virtual machines configured in a dynamic pool for our users. The pool settings are configured to allow a maximum of 4 monitors, with a resolution 1920 x 1200 on each monitor max. Users report that when they log in and try to change the resolution, the settings tab in the display properties page disappeared.

  Thanks to this research, I stumbled upon VM KB article 1020809, updated less of a month earlier, indicating a fix for this problem (changing the registry NoDispSettingsPage value to 0). I did it on my main template, however, when users log in is set to 1 return.

  There was also a thread in this forum who suggested changing the option multi-screen in the settings of the Pool to 1, leaving vCenter update, then change it back and then by a stop and start on all machines. I tried as well, but it has not solved this problem.

  Finally, I tried to turn OFF the option to hide the Group Policy Settings Page, but the setting remains at 1. Can I change the resolution of the screen via a script (it does not persist by a closing/opening session, that is another matter), but can not get the settings tab appears.

  I saw there is a model adm for Vista or Windows 7, but I am not mistaken, is there anything more that can be done to XP? I can't understand why this keeps getting ready again to 1 and am hoping that my users will not at all be stuck with a resolution of 1920 x 1200. As a side note, if I change it programmatically, what (s) do I need capture to have persist through a logoff (we use a third-party management tool ProfileUnity call profile)?

  Any thoughts would be much appreciated.
  

  What is the native resolution of the screens in use? I found that view will automatically set resolution in accordance with the native resolution. At least that seems to be the case in my situation.

• Satellite X 200-problem resolution HDMI port

  Hello

  I have an X 200 - 1AA.
  It comes with the graphics card 8700GT. I have Windows Vista Ultimate installed and the latest Toshiba drivers for this card. (NVIDIA has universal drivers for this card).

  When I connect to the computer via HDMI to my Plasma Hitachi 37PD5200 screen, which can go with resolutions up to 1600 x 1200 max resolution I get is 1024 x 768.
  I try to change the settings in the Nvidia Control Panel, but there is no custom settings for the HDMI port. The software detects the Hitachi monitor and says it is only capable of 480 p EDTV. And I can't change that.

  If I connect via the VGA cable, works very well, with 1600 x 1200 resolutions. But the problem is that Toshiba HD-DVD player works only via the HDMI port.

  If I connect a PS3, Xbox 360 or my player to DVD via HDMI, all devices to detect 1080i.

  As someone had this problem before?
  Any ideas for me?

  Thanks in advance,

  See you soon,.
  André Antunes

  X 200 - 1AA
  T7700 2, 4 GHz CPU
  4 GB DDR2
  300 GB 4,200 RPM HARD drive
  8700 GT graphics card.

  Hello

  Very strange, I know that the satellite X 200 series supports the standard HDMI V1.2 (up to 1080i). You can watch HD DVD movies on internal Toshiba laptop screen with a resolution of 1080i pixel and external TV Full HD with 1080 p resolution.

  I m not 100% sure, but I think that this setting can be changed in the BIOS. Check it!

  Your comments would be very appreciated.

  Hi dude

• GeForce 9800GT problems (resolution and horizontal lines) after upgrading to Windows 7

  I have recently upgraded to Windows 7 on my desktop HP m9350f computer.  I more a few days later my screen has finished by resolution 800 x 600 with horizontal lines on the screen, from the start.  I spent several hours with the support of Microsoft and HP by train to reload the updated drivers from the Internet HP site and Web of NVIDIA site with no improvement.  As part of the normal troubleshooting I plugged a cable and another monitor and the problem is neither the monitor nor the cable.  I removed the video card and temporarily replaced by another video card and the problem goes away, so the problem is with the graphics card (as opposed to the motherboard).  I replaced the NVIDIA card and the problem is back, essentially confirming that the problem is directly related to the graphics card.  While I found 'a lot' of discussions on the internet about similar issues with 9800GT cards, I can't find a solution to this problem. HP and MS have exhausted their resources. Any ideas or solutions?

  It's time for a new video card.   Remember to match the energy needs of the new card with the power supply of your PC.

• Problems when viewing files in the 'My Documents' window

  When I look at the files and folders in the My Documents window (in mode ' list') there is a wide space between the columns of information - I can barely hold two columns of names of files on my computer screen even if I do the window the maximum width.  It is a new problem - I used to be able to view the columns 3 or 4 names of files before.  My OS is Windows XP. Can you tell me how to reduce the space between the columns of information?  Thank you.

  Thanks for your reply "Tricky", unfortunately it doesn't work in "List" mode, and it is has no column headers.

  Apologies,

  I've been guilty of reading what I thought I only saw what I saw in fact.

  The only thing I know to which increases the width of the columns in the list view is the size of the names appearing in this column, they are files or folders. Check the lengths of file/folder name by renaming them, there might be some characters non-display, resizing of the window in the vertical direction might help identify the sections where the long name exists (if indeed that is the problem).

  Tricky

• Problems when views containing subqueries and the parentheses of engineering reverse

  I am running questions when using Data Modeler to reverse engineer Oracle views.  A problem occurs if the SQL view contains a subquery, one more question if the SQL view contains parentheses more than necessary.  Unwanted results include: views not valid, the main request being removed from view, leaving just the subquery, the schema name be stripped from the SQL and produces an error when testing the query and the view SQL completely deleted/ignored.

  Thanks in advance for your suggestions.

  Environment:

  Version 4.0.2.840 SQL Developer Data Modeler, build 840

  Running on Windows 7 Professional SP1

  Oracle Database 11.2.0.4, running on Oracle Exadata

  Steps to reproduce:

  1. the installer for the test:

  Create table 1A. for points of view

  CREATE TABLE test

  (col1 VARCHAR2 (10))

  Col2 NUMBER

  col3 DATE

  );

  1B. create a view with a subquery and parentheses "extra".

  VIEW to CREATE or REPLACE test1a

  AS

  (SELECT * FROM biuser2.test WHERE the col3 =)

  (SELECT MAX (test.col3) FROM biuser2.test

  )

  );

  1 create a view with a subquery, without the parentheses 'extra '.

  VIEW to CREATE or REPLACE test1b

  AS

  SELECT * FROM biuser2.test WHERE the col3 =

  (SELECT MAX (test.col3) FROM biuser2.test

  )

  ;

  1. create a view by specifying different column names, followed by parentheses 'extra '.

  VIEW to CREATE or REPLACE test2a (vcol31, vcol32, vcol33)

  AS

  (SELECT col1, col2, col3 FROM biuser2.test

  );

  1. create a view by specifying the names of different columns, without the parentheses 'extra '.

  VIEW to CREATE or REPLACE test2b (vcol31, vcol32, vcol33)

  AS

  SELECT col1, col2, col3 FROM biuser2.test

  ;

  2. run Data Modeler (stand alone, although the built-in SQL Data Modeler developer seems to work the same)

  Import of data, including the test table and all dictionary the views of trial 4.

  Any import, all 4 views have yellow triangle! icon indicating the points of view that must be analyzed, Parse old views of Style.

  3. right click and select "Parse of old views of Style" for each of the 4 views.

  Status of views are now:

  TEST1A: red triangle! icon

  TEST1B: disabled icon

  TEST2A: still has the yellow triangle! icon

  TEST2B: disabled icon

  TEST1A 4A.

  Right-click, selected Validate views has no effect.

  Examine the properties TEST1A

  Examine the query Query Builder

  Warning window will appear: parse error: could not parse the SQL query. Invalid SELECT statement. Unexpected token ') "in line 2, pos 7

  Click ok, the displayed query is:

  SELECT MAX (test.col3) OF biuser2.test

  )

  )

  Result of 'test the query.

  SQL:

  SELECT MAX (test.col3) OF biuser2.test

  )

  ^

  )

  Error at line 2, column 6:

  ORA-00933: SQL not correctly completed command.

  TEST1B 4 b.

  Examine the properties TEST1B

  Examine the query Query Builder

  displayed query is:

  SELECT

  TEST. COL1,

  TEST. COL2,

  TEST. COL3

  Of

  TEST

  WHERE

  TEST. COL3 =

  (

  SELECT

  MAX (TEST.) COL3)

  Of

  TEST

  )

  Results of 'test the query:

  SQL:

  SELECT TEST. COL1,

  TEST. COL2,

  TEST. COL3

  OF THE TEST

  ^

  WHERE TEST. COL3 = (SELECT Max (TEST.) (COL3) TEST)

  Error on line 4, column 5:

  ORA-00942: table or view does not exist

  Preferences for the Data Modeler: DDL: include the defined schema in DDL

  Note that BIUSER2 schema name was stripped from the SQL

  4 c. TEST2A

  Examine the TEST2A properties

  Look at the generator query of query

  No SQL appears

  Results of 'test the query:

  Nothing, if you use "test application" of the display properties window.

  Query executed successfully, so by clicking the green checkmark in the query designer window

  4 d. TEST2B

  Examine the properties TEST2B

  Look at the generator query of query

  displayed query is:

  SELECT

  TEST. COL1,

  TEST. COL2,

  TEST. COL3

  Of

  TEST

  Results of 'test the query:

  SQL:

  SELECT TEST. COL1,

  TEST. COL2,

  TEST. COL3

  OF THE TEST

  ^

  Error on line 4, column 5:

  ORA-00942: table or view does not exist

  Hello

  It seems that the problems with validate selected views and Parse old views of Style both TEST1A and TEST2A occur as a result of the view being defined with the SELECT initial placed in brackets.

  I logged a bug about this.

  Regarding the result of your Test request, you should be able to get this works using a connection that uses your username biuser2.

  When the Test Query window, you must set the login field at the top of this window to your biuser2 connection.

  In the case of TEST2A, it has "successfully" carried out an empty SQL string!

  David

• 5.2 horizon problem pool view

  Hi all

  I'm new to this forum... I have a problem with my farm of the view. I installed view 5.2. I created all the components (composer, vCenter, field, ecc). Everything is green... When I create a pool, I see not all VMs in the list Parent VMs.

  I created a VM XP SP3 in my farm, with DHCP, in my field, and with the Agent of the installed display. But nothing: view does not show me the virtual machines.

  Any suggestion?

  Thank you!!!

  Matrix

  Hi all!!!

  I have some news! I restarted the Service of inventory (?) on vCenter and after the connection to the server. Now everything is OK!

  Thank you all!

  Matrix

• 'Code & Design' and 'Code & Live' problem from view I get in Dreamweaver CC 2014

  Please someone help me.

  I have 2 Web pages, we're with 12 columns based on the fluid grid and another without fluid grid in function.

  Both are open in the same site in Dreamweaver CC 2014.

  I want to resize/change my fluid div column grid in design mode.

  But I m not getting is not the menu appropriate (see-> Code and design)

  Why the problem happening?

  If my page no fluid is active to end edit I get the 'view '->' Code and Design.

  If my fluid page is active to end edit I'm no way to 'view '->' Code and Design.

  but I think ' view '->' Code and live. "

  I can't resize my fluid div using the resize Manager.

  It's base fluid, I need 'code and design mode '.

  It's not fluid based

  Hi ASeth7,

  With the latest version of Dreamweaver CC 20141, FG authoring mode has been removed. That's why you can't see Code and Design for the FG pages but it is there for the pages not FG

  I hope that help you understand the different behavior.

  Thank you

  Lalita

• Problems with views based on a hierarchical query

  Datamodeler 3.1.3.706 (SQL Dev 3.2.10.09):
  
  When you create a view that uses a hierarchical query, the query designer encounter various difficulties:
  
  When pasting in the SQL code, if the notice is registered without first clicking the schema update button, the object in the entity-relationship diagram view provides a faithful representation of the view without errors, but when the reopening of the view, the code is missing.
  
  Simple example with the classic emp table:

  SELECT level lev
        , emp.*
     FROM emp
    CONNECT BY prior empno = mgr
    START WITH mgr        IS NULL

  If you press the schema update button to refresh the display. He mangles connect it by the clause and the view gets marked with a warning/error icon in the diagram of the relationships, but the now decomposed code remains available on reopening of the query designer.
  
  Same code as above after having clicked on the button of update of schema:

   SELECT Level lev
  , emp.*
     FROM emp
    CONNECT BY

  Other issues are met if the query contains a column CONNECT_BY_ % nickname hierarchical:

  SELECT level
        , emp.*
        , connect_by_root emp.ename root_ename
     FROM emp
    CONNECT BY prior empno = mgr
    START WITH mgr        IS NULL;

  In this case, paste in the code and clicking Update schema button or the OK button translates into a "unexpected Token' error analysis.
  
  These problems are encountered with the logic model and the relational.
  
  Is this a known issue? I searched this forum but have not found any references to this.
  
  Thank you
  
  Sentinel

  Hi, Sentinel,

  I logged a bug for this.
  You can try 3.3 DM treat it better first problem, analysis of connect_by_root operator will pass if you do not alias.

  Philippe

• Problems with View Composer / vCenter 4

  Hello

  I upgraded my server vCenter v4 yesterday (build 162856) and ran into problems of performance and pages of material due to a collision with the port 8443 - that was used by the View Composer.

  Then... I moved my View Composer 18443 port number, that makes all the cunning vcenter work, but now does not work my composer. I changed the port in the overview Manager it connects to and I can get as far as the button complete, when I create a new pool configured automatically. vCenter then creates the folder for him and he removes (or almost) immediately. View Manager then up a ' composer of internal error. Contact your system administrator.

  In the newspapers, a Java error is reported: ' problem setting HTTP connection:

  javax.net.ssl.SSLHandshakeException: remote host closed connection during

  handshake. "

  Any suggestions gratefully received! I'm guessing that something is always looking for an answer on port 8443, but I don't know what!

  See you soon,.

  Iain

  Probably during the 2nd half of ' 09...

• Problem resolution DVI - nVidia Quadro NVS 120 M

  Hello

  I recently bought a Philips monitor LCD flat screen 220BW8 for use with my laptop Latitude D820 Windows XP with nVidia Quadro NVS 120 M (256 MB) graphics card. It works fine in VGA mode, but I have the weirdest problem when I try to use a DVI connection:

  The maximum screen resolution is 1650 x 1080. When I put the screen (by using the display settings in Windows) to this resolution and use a DVI display connection complains I should use 1650 x 1080 instead of 1650 x 1200. Indeed, the display shown is larger than the screen and pans when I move the cursor to the edge of the screen, but Windows reports that the resolution is 1650 x 1080 (while, again, the monitor reported that the resolution is 1650 x 1200).

  When I watch carefully the dual link DVI - D cable I bought with the monitor, he said "resolution 1600 x 1200 and older" (I have not noticed until that moment). Now, I tried another dual link cable as well as a single link cable. Neither cable resolves the issue. I still can not 1650 x 1080 resolution on the screen even if I ask for it in Windows.

  No one knows what might solve this problem?

  Message edited by TFN on 04/03/2008 13:55
  
  

• Need help... Faced with problems of view lab...

  Hello

  Background information on my system/software:

  I am using a snow leopard Mac system and running a student version of labview 2011 edition.

  The labview-2011 edition student was purchased from e5.onthehub.com, such as recommended by my University.

  Problem:

  The problem that I am running is that I have several missing features in my palettes...

  Is anyway to fix this?

  * Check the attached photo *.

  Any help with this problem will be greatly appreciated!

  Thank you!

  According to Dennis, not go on those on Mac. The reason is that they are based on ActiveX controls, and Mac OS does not support ActiveX.

• I have problems with viewing and downloading videos

  Hi I'm trying to watch videos in youtube and windows media player, but I can't do it. I use Windows XP Professional when I start watching a video, it starts to download and then I get the circle to peas autour going around and around but it does not play when she plays it stops and how can I solve this problem?

  Thank you
  E-mail address is removed from the privacy *.

  Hi upthearts,

  One of the possible reasons could be the speed of the internet thanks to which time can take to the buffer. It has one or more of the following could cause this;

  ·         The Internet connection speed

  ·         Amount of RAM (Random Access Memory) used on the computer

  ·         Amount of memory available on the computer

  Method 1: You can pause the video and let the video buffer for a few minutes before selecting the 'Play' button again. Giving the download a few minutes to catch up while the video is paused can help solve the problem.

  When the bar of State indicates the video transfer or the download is complete, resume playback of the video using the controls.

  Method 2: You can also contact your ISP (Internet Service Provider) to check connection problems.