Problem running the function mouseup

Similar Questions

• Kalonline-works until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking

  I play kalonline (RPG game), when to start the game it works up until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking. the program stops. I am the admin of it say kal computer run it in administrator mode and I did and I delete and reinstall the game. Solve the problem in win 7 by a right click and run as administrator, they wanted to work in win xp it all fits on how to solve this problem. These are the things, I was told to do to fix it.
  Hello

  It comes to KalOnline.

  Your error message can be corrected by following these steps:

  1. run KalOnline in Administrator Mode.

  2 uninstall KalOnline d_lete the entire Inixsoft folder, then reinstall the game.
  I did it and and it has not worked. then I was told that this was causing the problem

  Please check your computer system.

  This problem has occurred by a kind of problem of piracy.

  And if you have used a kind of memory-editing program, it could be happen too.

  So if your receipt similar to, then please remove it.
  I have none of these things on my computer. All I know is that people who have not updated windows xp can play the game and people who win 7 can play the game if they right click icon and run as administrator, that I still say side here but no way to prove it.

  Hello

  I suggest you to get in touch with the manufacturer of games and see if there are any other fix for this problem.

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• problem running the session of remote debugging for specific oracle sql developer

  I have a problem running the session of remote debugging of sql server specific oracle developer.
  I get the following error:
  Connection to the database mmgrep - INNA.
  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('inna.followap.com', '4029')
  ORA-30683: failure connecting to debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  Process is complete.
  
  
  I understand that Oracle is unable to connect to my PC.
  I have 2 different oracle servers to work with the sql developer. With one I can run debugger, with another - the errow above.
  I need to change to be able to start debugging with second oracle server.

  In tools | Preferences | ebugger, you can specify a range of ports for the debugger to use so you can limit it to those that are open on the firewall.

  And just to check, is the ip address that is displayed in the CONNECT_TCP call the right one for your PC?

• Problem running the sample Application after installation patch set 4.0.2.00.07

  We just applied the fix 4.0.2.00.07 on our environment to TEST APEX4.0.
  Now, I can not run the sample application. "When I run the application, log in using either the administrator or the user of demo with the #lower_case_workspace_name #", the browser generates the following error message:
  
  ORA-06550: line 2, column 8: PLS-00201: identifier 'CUSTOM_AUTH' must be declared ORA-06550: line 2, column 1: PL/SQL: statement ignored
  ERR-10460 error cannot perform the function of verification of the authentication credentials.
  
  The sample application works very well on our DEV APEX 4.0.0.00.46 environment * without * the patch set 4.0.2.00.07.
  
  Does anyone have an idea how to solve this problem
  Thank you

  Hello

  Ensure that the CUSTOM_AUTH & CUSTOM_HASH functions exist in the scheme of the analysis of the sample application.

  CITY

• Problem with the function 'Ivi_InitWithOptionsAndGetError '.

  Hi all
  I am trying to run the example that appears in page 12-7 on the http://digital.ni.com/manuals.nsf/websearch/9D3D530113B7875F86256D2C0061F6BE document
  I have configured Max in this way:
  -Logical name: pilot MyFGen--> Session: Agilent 33220
  -Pilot Session: Agilent 33220
  -General: Without simulation Options Init and withouy
  -Material:
  -Name: MyAgilent33220
  -Descriptor resources: TCPIP0::192.168.55.114::INSTR
  -Software: Software Module: Agilent33220
  -Virtual: MyAgilentFGen physical name: Chan1
  -Initial parameters: void

  -Instrument driver software Module:
  -General:
  -prefix: Agilent33220 ProgID: Agilent33220.Agilent33220
  -Path of the module:... \IVI Foundation\IVI\Bin\Agilent33220.dll
  -Physical names: Channel TCPIP0::192.168.55.114::INSTR

  When I run the program apperas LabView the following error:
  -"Initialize IviFgen with Options.vi.
  Driver status: (Hex 0xBFFA0011) primary error: (Hex 0xBFFA0011) function or method not supported.
  "Development: FunctionId: 3, FunctionName: InitWithOptions.

  What could be my mistake?
  Thank you and best regards

  
  

• BB10 sdk 10.0.9.1673 problem, run the application on the device

  

  I am facing problem by running the application on BB 10 alpha dev device after the installation of the SDK gold BB10
  question is attached to this post please suggest a possible solution for this problem

  updated the SDK, 1673 is not the last. You should be able to do it using the menu Momentics.

• problem running the software after installation

  I installed age of empires 2 on my laptop and when I tried to run, the aoe2 loading screen would come and then close after 50sec. I don't know what the problem is. I need help

  Hello

  1 - is your computer meets the requirements of the game?

  2. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps outlined in the following link from Microsoft to solve the problems of the game performance and check.

  The problems of the game performance:

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  Method 2:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs. Using the boot, you can determine which third party game or an application is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Hope the information is useful.

• Problem running the Runtime Web Installer for DIrectX end user in Windows 8

  When I try to run the Web Runtime DirectX installer for the end user, I get an error when the installation starts. The error indicates that "the required CAB file for installation cannot be trusted. Please check the Cryptographic Services are enabled and the cab file is the certificate is valid. "I can confirm that the assistance service is running without any problems. I use Windows 8. Can someone help me out here?

  Hello

  I would try just to download the redistributable components Package and install it and then...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• Run the function after the update of values

  I am writing a pretty basic plugin where I need to have a function to run after a point values have been updated.

  I do this to change the point values:

  params [POINT]-> u.td.x_value = FLOAT2FIX (pointX);

  params [POINT]-> u.td.y_value = FLOAT2FIX (pointY);

  params [POINT]-> uu.change_flags = PF_ChangeFlag_CHANGED_VALUE;

  This works very well for updating the values, but the code that goes after this block is executed until the values change really. Is there a way to force change to happen once I set new values or is there another place I can put the function so that it is executed after the values are actually changed?

  Hi Jesse Toula. Welcome to the forum!

  If you want to change is instantaneous, you can use AEGP_SetStreamValue() instead of the method that you use.

  There is no function that is guaranteed to be called when you change the values.

  UPDATE_PARAMS_UI could be called, and also a call of minutes is likely.

  You can set a flag in the sequence data to inform yourself of the pos - t change operations that must take place in such cases.

  personally, I'd go with the AEGP_SetStreamValue() solution.

• Problems with the function document XSL Transformation on OSB

  I'm trying to use the xsl document feature in my XSLT file to perform a transformation on the Bus of Service Oracle (version 11.1.1.4), but I see the following error message when you run the sbconsole test (just to test the transformation currently).
  
  Execution of the XSLT error: com.sun.org.apache.xalan.internal.xsltc.TransletException: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException: Validation of XSLT Project1/xslt/iso-3-to-iso-2-lookup.xml: XSLT Project1/xslt/iso-3-to-iso-2-lookup.xml does not exist has failed
  
  The error indicates the file XML I'm referencing from the XSLT that does not exist in the specified folder, I confirmed that the file exists and we tried to move to other places and chaning the location of reference in the XSLT, but the error persists (with location of update). Anyone know if the XSL document function is supported for the transformations on the OSB or if there is something special that needs to be done so that the OSB can refer to the XML file properly?
  
  Here is the code snippet of the xslt file that launches a call using the XML file:
  ...
  < xsl: output method = "xml" encoding = "UTF-8" Indent = "Yes" omit-xml-declaration = "yes" / >
  "< xsl: Key name="ISO-3-to-ISO-2-lookup ' match = 'country' use = "iso3" / >
  "< xsl: variable name="ISO-3-to-ISO-2-Lookup "select ="document('iso-3-to-iso-2-lookup.xml')/ISO-pays"/ >
  < xsl: template match = "/ xx - xxxx:SyncSearchRequest" >
  < ns0:Search >
  ...
  
  Here is an extract from the XML file that I use as the lookup table:
  ...
  ? XML version = "1.0"? >
  < ISO-country >
  AF < country > < iso2 > < / iso2 > < AFG iso3 > < / iso3 > < / country >
  < country > < iso2 > AX < / iso2 > < ALA iso3 > < / iso3 > < / country >
  < country > < iso2 > AL < / iso2 > < ALB iso3 > < / iso3 > < / country >
  ...
  
  Thanks for any help.

  In OSB, document() function needs the path absolute XML file. So if you want to access the XML document for the search, you should place the XML file on the server itself and use the path of the XML file.

  Although it is not a good approach for the management of the OSB research. The type of Document XML resource must not be used for these use cases. What you can do is create an XQuery query that can server as a DVM.
  Here is an example on how to use DVMs in OSB:
  https://blogs.Oracle.com/christomkins/entry/domain_value_maps_in_oracle_se

  If you do not want to use XQuery and want to rely only on XSLT, then in the same document XSLT to create a separate model that can store all the data of research.

• problem with the function 'higher Arc.

  Hello

  This is my first post here so I hope I'm doing this right...

  I added a screenshot to clarify my problem. As you can see in the picture, "Kick it up!" he shows a good top arch - only the upper part is passable and the lower part remains level. However, when I try to use the function 'Upper arch' to my own text, as you can see with the little 'dhfghfhj', the lower part is passable upward as well!

  When I try this on computers at school, it works correctly. So, what I'm doing wrong here? How to do the lower part remains unchanged? Is something wrong with my copy of Illustrator?

  Thanks in advance,

  koekedozekes

  koekedozekes,

  If you want the base to stay straight line, you can:

  (1) object > transform > rotate (180) or (vertically) reflect a copy and place so that baselines are equivalent;

  (2) set the opacity of the copy on 0 in the transparency palette.

  (3) group and apply the effect > Warp > bulge.

• How to run the function body that is stored in the variable string?

  Hello!

  Let's say we have a function body stored in the string variable, like this:

  ......

  ......

  var body: String = "public function display_message(kom:String):void {mx.controls.Alert.show (kom) ;};

  .....

  Here, I would like to do something with variable 'body' to run the code in this variable, is - it possible?

  ......

  ......

  With regard to the bars.

  d.Eval can do what you want. check it out at http://www.riaone.com/products/deval/index.html

• Problem running the exe Islands after that that they are downloaded

  When I try to run an exe file created in CP3 on the web, I get the following error:
  NTVDM CPU has encountered an invalid statement, CS:Oddc IP:0592 OP:63 65 74 65 6
  
  I created exe for 4 quizzes created to the CP3, downloaded files and created links to them in a simple html page. All four files have been created in exactly in the same way, but I can't run one of them on the site.
  I tried to rebuild the file and re-upload and have recreated the link html errors. The file opens without a problem on the local drive.
  
  Any help on this would be much appreciated, I am at a loss.

  Hi niamhc

  In addition to what Eric offered, I would ask if you tried to clear the cache of your browser? Sometimes, a file is not from the intact server and must be downloaded again. Maybe it's the case here and empty the cache may change the behavior.

  See you soon... Rick

• problem with the functions

  I tried to run the following function
  
  
  
  FUNCTION to CREATE or REPLACE dml_call_sql (sal NUMBER)
  RETURN NUMBER IS
  BEGIN
  INSERT INTO employees (employe_id, last_name, email, hire_date, job_id, salary)
  VALUES (1, 'Gel', '[email protected]',
  Sal SYSDATE, 'SA_MAN',);
  RETURN (sal + 100);
  END;
  
  
  
  and call it as:
  UPDATE employees
  SET salary = dml_call_sql (2000)
  WHERE employee_id = 170;
  
  
  but it signals an error. I am new to features and absolutely no idea why this is happening. Help, please.
  
  Thankks in advance

  Hello
  Please find the following code.

  CREATE OR REPLACE FUNCTION dml_call_sql(sal NUMBER)
  RETURN NUMBER IS
  PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO employees(employee_id, last_name,. email, hire_date, job_id, salary)
  VALUES(1, 'Frost', '[email protected]',
  SYSDATE, 'SA_MAN', sal);
  commit;
  RETURN (sal + 100);
  END;
  

  Then run your update statement

  UPDATE employees
  SET salary = dml_call_sql(2000)
  WHERE employee_id = 170;
  

  But once again, look in your condition and carefully you use AUTONOMOUS_TRANSACTION.

  Please mark this message as 'Useful' or 'Correct', as appropriate.