Problem to access the configuration of System Protection settings

Similar Questions

• Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

  Original title: network router, XP computer and Windows 7 laptop computer dilemma.

  My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

  Hi Scottid2,

  1. do you receive error messages when you access the Windows XP system?

  2. What is the password being set by Dell?

  You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

  You can turn off password protected sharing and check if it helps.

  For more information, see the articles:

  Why can't I connect to other computers?

  Networking of computers running different versions of Windows

  As the password is set by Dell, you can also consult with support of Dell for the same thing:

  Dell support

• WRt160N is unable to access the configuration screen after the demotion to a lower version

  I just bought WRT160-V2 two weeks ago. The connection kept down all the minutes. After reading some threads in this forum, discovered that I was not alone. A thread under the instructions of a http://audipages.com/router/ site. So I upgraded my router for firmware v2.0.0.02 build 008. The connection is much more flexible. However, Setup screem has not come back. Now, I am not able to access the configuration with 10.10.10.1 screen. Help, please. Thanks in advance!

  After an update of the firmware, you must reset the default router, and then configure the router again from scratch.  If you have not done this since your last update of the firmware, please do it now and see if it solves your problem.  If you have saved a router configuration file, DO NOT use it.

  To reset your router prress the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• WRT54GX4 - difficulties to access the configuration Page of the router Web-based

  WRT54GX4 - difficulties to access the configuration Page of the router Web-based.

  I have tried all posted to forums and knowledge for several weeks now with no luck.  I can feed the router to push and access the router's web-based interface, but only for a few minutes that she was leaving the loading to half way through and or does not load.  If I turn on the wireless side I can access the router at will without any problem. My warranty is almost over. I'm at my wits end. I would like to replace it under warranty if I can. (^ 8.

  Update: I fell up on top of the fix for my problem. After many reconfigurations over the past two months I've tried turn on all newspapers. Since the age of the newspaper I did have a problem of access to my router.

• After installing a new HARD drive, I get a screen "control i to access the configuration utility.

  Help?

  I installed a new HARD drive on my xps 15 because the old drive crashed. Everything works fine and the system boots perfectly. Before entering the Dell splash screen, the screen "control i to access the configuration utility" appears for 5 seconds. After that, the normal boot sequence resumes. Can someone please explain to me why this is happening and what I can do about it?

  Here is a link to the screen I get started: http://s102.photobucket.com/user/alexcinie/media/photo_zpsb75f0a7f.jpg.html

  The mSATA drive is used as a cache for the hard drive dynamic - these are essentially implemented in a RAID 0 array.  See the link below (it is for Alienware, but applies to your system as well).

  If you want to keep the disk cache, you need to configure the array as shown.

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=564442

• Can someone help me with printing. My settings have been changed. I have a printer Epson Stylus and pse 13. I can't access the configuration screens that they show that I need to access.

  I can't access the configuration screens that they show that I need to access.

  What is a forum. I don't understand. I'm 63 and they will not access my computer at ADobe

  I can't access the configuration screens that they show that I need to access.

  What do you need access? When you encounter a problem?

  What is a forum. I don't understand.

  A forum is a place which provides for exchanges between users.

• E2500: 'the connection to the 192.168.1.1 was interrupted." When you access the configuration page.

  Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted."  I'm wired into the router.  Any idea of what is the cause?

  Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom.  Thanks for the tip-off that the reset method should have worked.

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• difference between the configuration of System center 2012 & central Office Manager

  Can someone give me the difference between the configuration of System center 2012 & version 8 Central Office Manager please.

  Hello

  I suggest you complete differences of the research for yourself. You can ask your question on the System Center forum and contact support central Office for more information.

  http://social.technet.Microsoft.com/forums/en-us/configmanagergeneral/threads

  I hope this helps.

• just joined the cloud having problems to access the pro Prime Minister... help me please

  just joined the cloud having problems to access the pro Prime Minister... help me please

  Hi again Jeff... Thank you for the time you took on this

  question... my daughter figured it out and all is well

  Duarte

• Email connection problems: cannot access the requested url due to the system on that server error

  How can I get my email on when I get the above message

  Cannot access the url reqested due tosystem error on this server

  Apparently, there is a problem on the mail server. Contact technical support for your email provider. MS - MVP - Elephant Boy computers - don't panic!

• Unable to access the configuration of Secure Token Service in oamconsole screens

  We have OAM and installed on 5.7 OEL (11.1.1.5) STS. OAM works fine URL protection via webgate etc. We want to explore STS. However, we are not able to access the related display in oamconsole.
  
  Here are the errors when you click either "System Configuration/Common Configuration/Available Services" or "Service token System Configuration/Security Token Service/security settings".
  
  ---
  Operation of the MBean access denied. MBean: oracle.oam:type = Config operation: retrieveMapPropertyArray (java.lang.String) Details: access denied. View of the roles: Admin, subject to execution: principals = [oamadmin, OAMAdministrator]
  Error
  Access denied. View of the roles: Admin, subject to execution: principals = [oamadmin, OAMAdministrator]
  ---

  Make sure that the user you do login with is a member of the Administrators group on the LDAP backend. The name of the right-wing group's directors, not admin.

  André.

• Cannot access the configuration of my router (wrt54g) page

  I can't access the page of my router (wrt54g) configuration after the installation. The router works fine, but whenever I try to connect to 192.168.1.1 it says the password is incorrect. The first time that I put up I changed the default user name and password and I thought I'd simply forgotten, so I reset the device. This time I don't change any of the default values, and I can not even log on. I have to reset it several times, and you're just annoying. Anyone know how to prevent it from happening? I thought it might be a firmware issue, but I can not find all downloads for my version of road ' rs (V8). I use a macbook pro, osx 10.9.2.

  My neighbor has pretty much the same question. Did some research and found many people with similar problems. Probably time for a new...

• the configuration of system restore point

  Pls show me how to configure the system restore point in Windows 7

  Create a restore point

  • Click the Start button, then select Control Panel > system and Maintenance > system.
  • In the left pane, select the protection system.
  • Select the System Protection tab, and then click Create.
  • In the System Protection dialog box, type a description, and then select Create.
  Back up and restore your PC - Microsoft

   

  https://support.Microsoft.com/en-us/help/17127/windows- backup -restore

• Homegroup problem while accessing the shard files

  Original title: Homegroup mixup

  I have two computers connected to the home wireless network and the Internet via a modem from Bell. These two are in a homegroup, and the correct password Group residential appears in both entities. The two computers in network folders. I can access it from the computer #1 computer #2 without problem. However, since the computer #2 I can't access the computer #1; I wonder a user name and password to access computer #1. I don't know what name and password I am asked. I find Microsoft Help such an amazing and spent hours mambo jumbo transmitted by one link to the other. Troubleshoot homegroup and home network not found any problem. Can someone tell me just what may be the problem and how to fix it?

  Hi Vidojko,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description provided, looks like you are faced with a problem when you access the brightness on homegroup files.

  This problem occurs because of permission settings.

  Try the following methods and check.

  Method 1:

  I suggest you to check the file/folder permission settings.

  Refer to the mention of the steps below:

  a. click the Start button and then click on your user name.

  b. navigate to the file or the folder that you want to exclude the sharing and select it.

  c. do one of the following:
  To prevent the file or folder to share with anyone, in the toolbar, click on share and then click nobody.
  To share the file or folder with some people but not others, in the toolbar, click on share with, click specific people, select each person you want to share with, and then click Add. When you are finished, click on share.
  To change the level of access to a file or folder, in the toolbar, click on share with, and then select group residential (read) or homegroup (read/write).

  Method 2:

  Try to remove the sharing protected by advanced sharing settings change password.

  a. open homegroup by clicking the Start button, clicking Control Panel, typing homegroup in the search box, and then click homegroup

  b. click on change sharing settings advanced, remove the option sharing protected by password and check if it helps.

  See the following for more information Microsoft article.

  Homegroup from start to finish: http://windows.microsoft.com/is-is/windows/homegroup-help#homegroup-start-to-finish=windows-7&v1h=win8tab1&v2h=win7tab1

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.