Problem troubleshooting with updates

Similar Questions

• Problems with updates

  I was freezing issues with my computer, so I did a restore.  It does not solve the problem, so I did a reinstall of Windows 8.  Now when I try to download the updates, it freezes.  Sometimes I am at 43%, sometimes 95%, but it never ends.

  I have downloaded and run the troubleshooter for updates, and he says he corrected some things, but the problem is still occurring.  Usually, I can download an update after I run the troubleshooter, but when it finishes, I have problems with the next update and the same problems are found in the resolution of the problems that have been resolved in the last time.

  Please help, I get very frustrated with it that I have more than 100 updates to download and install reinstall it since.

  Thank you!

  Hello

  Have you tried restarting your computer?

  1. move your mouse in the corner at the top right of your screen

  2. tap on settings

  3. press Power , then press restart

  4 after the reboot is complete, try again to install Update

  If this does not work, try this

  1. restart your computer as shown above

  2 once your full restart search for CMD and then launch the program

  3. Enter the following text in CMD: net stop wuauserv

  4. type: Rename C:\windows\SoftwareDistribution softwaredistribution.old

  5. type: net start wuauserv

  6. try to Update

  This should solve your problem

  Thank you

  Microsoft guru

• problems with update iOS 9.3 car bluetooth

  problems with update iOS 9.3 car bluetooth. break and cannot hear the caller voice calls.

  In what seems to be the same problem, this AM. iPhone 6, iOS 9.3, its stock of 2012 Honda Odyssey system. Worked well with iOS 9.1. With iOS 9.2 bluetooth would be occasionally disconnect, then reconnect about 5-10 seconds later. Reset all the settings bluetooth both phone and car with no improvement.

  IOS installed 9.3 last night. Phone connects, but the audio is unintelligible. Sound cut about every quarter of second, then reductions for about a quarter of a second, ad nauseam. Reset the phone without effect. Will try other things later today, but the phone is unusable with bluetooth, as is.

• Problem with update of Windows 7.

  After my computer run an update to Windows 7 it's a reboot without displaying message me.

  How can I avoid this and only to restart the computer when I'm ready?  Thank you.

  HowManage , Configure and troubleshoot Windows updates

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Try disabling your antivirus utility temporarily when you are trying to update.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• for windows update make me number error msg: 0 x 80240036 and solve this problem poblem with fixit get msg w xp sp3 rendered and nework Framework 2 or lator should be installed pls can help you

  for windows update make me number error msg: 0 x 80240036 and solve this problem poblem with fixit get msg w xp sp3 rendered and nework Framework 2 or lator should be installed pls can help you

  See your other thread the same. http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/to-make-Windows-Update-am-getting-MSG-error-number/3f579859-ecb0-408D-9db3-804044a21fb7

• PROBLEM WITH UPDATE OF VISTA HOME BASIC

  I've never had a problem in the past with update. All of a sudden this month there are five important to download updates and the progress bar shows 0% and nothing happens. I am at my wits end and have tried everything. Initially, I did a restore to July 6. Download not successful, but updates to the. I manually downloaded the file tool verification KB947821 for 32 bit (150 MB) and now update Windows Installer says independent research updates? It has worked for centuries.  I thought it was supposed to ask me to install the hotfix, and then do the scan? Any help would be appreciated

  Manually install KB3168965.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53206

  The value "never search updates" updated machines and Windows before restarting.

  Best regards, VZ

• Problem with update of Intel for Intel (R) Wifi Link 5100 AGN driver

  Hello

  I have Windows Vista, Office 2007, and when I download the update recommended above makes my Internet become very reliable. Some Web pages is not affected, but some will not work. There is no obvious reason why this is the case for all advice would be greatly appreciated.

  Thank you very much

  Paul

  Hello

  You tell us where you found the recommended update.

  ________________________________________________________

  FYI for Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Problems with updates on 3 and 23/3/24?

  My computer has not been run as smooth and having internet problems after that I installed two updates: update for windows vist for systems x 64 (KB2524375) [installed on 3/24] and update for windows vist for x 64 systems (KB2505189) [installed on 3/23].  Is anyone else having problems since these updates?

  I get no such error messages, but then that on the internet, some pages will simply continue to load forever - after clicking to exit the browser, you hear a 'bing' noise, and it won't let me not out (I need to start the Task Manager and cancel it this way).  Any help would be appreciated.

  Assuming that your McAfee subscription HAS expired, try the following fix:

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. DON'T SKIP THIS STEP! Open Internet Explorer (only) to the http://support.microsoft.com/kb/971058 of => & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I've updated the plan of the photographer and since the download, I had problems nonstop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or should I cancel

  I've updated the plan of the photographer and since the download, I had problems with non stop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or do I cancel my subscription to the CC and return to the CS6?

  The problem of fluidity can be the result of a graphics card problem:

  Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.

  On the bridge: when you select an image and press the space bar, what happens?

• Problems with updating creative cloud to desktop. (error code: 2)

  Problems with updating creative cloud to desktop. (error code: 2)

  Hi Mike,.

  You can follow the article: error: "unable to install". Creative Cloud Desktop that will help you get your number sets.

  Alternatively, you can follow the thread: Creative Cloud desktop could not be updated. () Error code: 2) where this issue is already addressed.

  Let us know if it works or not.

  Thank you

  Yann Arora

• Problem with update of Photoshop, Illustrator and Indesign CS6

  Hi all. I have problem with update of Photoshop, Illustrator and Indesign on OSx 10.8.4 CS6. Application are OK but update (bug fixies) does not work. Update failed. (U44M1P7)

  Hi El Gondo,

  The following could explain and help solve the problem...

  U44M1P7 - updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-upda tes-HYPERLINK

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

  http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-extension-manage r - update.html

  Thank you!

  Ankit

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Having a lot of trouble with updates.

  Having a lot of trouble with updates. Windows updates do not settle with error code 0 x 643. Fix from MS Computer Center said as he repaired software update. This does not resolve the issue. Fix MS datacenter failed with code 16977922-2147024894. Troubleshooting MS Wizard had had to close with an unexpected error code 0 x 80040154.  Norton updates fails with an error unexpected 0x000003E8. Update of Skype have also failed.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  Method 2:
  Try to perform the clean boot, and then check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960