Similar Questions

• L26500 61i: PROBLEM UPDATE FIRMWARE L26500 61i

  I can't update firmware. My latest firmware is 11.0.0.2 and when I try to upgrade to 12.00.00.5 I get this message

  SP - SP_12_00_00.5_mvl40 - x 86 - opt_B.signed.fmw: there are problems with the firmware file and the firmware update process has failed. The file you have selected may not be good, or the problem may be due to a transmission error. Please, start the firmware update process again. If the problem persists, please contact support.

  I tried to download it again, but it's the same thing...

  I have checked the connections on the back of the printer and found a LAN connection, I confused with the 360 LaTeX, sorry my mistake
  Another task to do, run the diagnostic menu of emergency update firmware.
  If issue still continue, run the hard drive recovery in the same menu

• Problem updating Firmware emulex card (FCoE) thought a single Manager command

  vCenter 4.1

  ESX 4.1 update 2
  

  OneCommand Manager 5.2.12.2 - 1 < < install on ESX using esxupdate

  CIM provider < < install on ESX with rpm

  OneCommand Manager for VMware vCenter 1.1.0 < < install on Virtual Center
  
  I want to update Firmware to troubleshoot vMotion between esx host
  

  Firmware OCe10102 and Startup Code
  Notes: You need to update the firmware and boot code on the OCe10102 UCNA when you install the driver.

  http://www.Emulex.com/downloads/Emulex/firmware-and-boot-code/oce10102-UCNA-firmware-and-bootcode/firmware-and-boot-code.html
  

  any idea?

  Error message

  
  

  
  

  
  

  Hello ianeme,

  I was watching the forums and came across your question. Ask yourself if you have solved your problem of port when you use plugin manager of OneCommand to vCenter Server? I have seen that HP has two downloads for the fw updates. For now, the last FW update to CN1000E is 4.0.493.0 March 12, 2012. Call the Emulex support if you experience problems when you try to update the fw with the Emulex OneCommand Manager application or the plug-in. But just make sure you are tested and approved HP FW by downloading the files from their site.

  Thank you

  Alex

  http://www.Emulex.com/the-implementers-lab.html

• Problem updating firmware on LaserJet 4100

  Hi all

  Looks like I can put my subject in the wrong forum. I have no doubt I should have put my question here in the forum of firms. If someone could take a look at my problem and update (here or here, I subscribe to two topics), I'd be happy.

  https://h30434.www3.HP.com/T5/printing-issues-troubleshooting/LaserJet-4100-firmware-unable-to-updat...

  If an admin can move my post on this forum (or anywhere where it belongs) so that the right people see I understand that too!

  Sorry, new to these forums and forums of discovery of the 'user' before I found the forums 'enterprise '.

  Thank you

  -Derek

  Hello Derek Cunningham, I am an engineer of the HP technical support. I am taking the floor for me and not for HP, but I believe that I can help you.

  Well, it took some searching.  The latest version of firmware that I could find was little out August 2, 2003 (version 1.040.2) part No. C4168-67907 listed as "HILL of DIMM KIT - ROCK".   That said, as of March 31, 2009, the product is no longer a support and spare parts may no longer be available.  I gathered this information by your request directly - however, don't believe not that the firmware update will solve the problem of 'page spew' reported.  I went through the list of firmware for different DIMM firmware versions fix and see nothing corresponding to your symptomatic behavior.

  If your workflow printing is to point and print (customers who print via a print server) Please ensure that the server and clients pilots match.  You can always remove the printer connection client and restore to ensure that binary correspondents sells.  Driver version is important, because the old specific drivers are not supported or even stable with current operating systems.  I suggest you switch for the driver of Microsoft OS Inbox for testing.

  Suggestions were made to try to PCL 5 or PS, I think that the essential thing here is to make sure you are using the latest driver for your product and the OS.

• Problem updating Firmware of the Module e/s

  All,

  I'm trying to update the firmware of the i/o Modules of 1.3.1p to 1.4.1i.  I downloaded the firmware and when I activate it I choose to ignore the compatibility tests.  The module IO then resets and goes through a process of restarting.  After a little while the State is ready but the firmware running is always 1.3.1p.  I also tried by choosing to place it in the start menu to the top only and then reset the module e/s, but the results are the same.  This happens on two modules e/s.  Interface cards and the MMIC both updated without problem, but I'm stuck at IO modules.  Anyone encountered this?  Does anyone have ideas, what may be the problem?

  Thank you

  Ken

  The IO modules get updated at the same time as the fabric of interconnection when they reload and upgrade.  Upgrade one restart of the IF that and the i/o module should be at the same time.  Note that in the activation page you should see in the meantime "rebooting" next to the modules of e/s for this fabric before restarting the FI.

• Problems updating Firmware 7 IDRAC

  Hi, I had problems with my controller IDRAC PowerEdge T320. It seems to be a known issue, introduced with Firmware version 1.50.50, which is delivered with my machine. Basically, the device signals that all user sessions are used. (RAC0218). I am running Windows 2008 Server R2. To resolve this problem, I find the IDRAC firmware update version for my system. 1.57.57 downloaded the windows EXE file and it ran. The release notes say that a reboot is not necessary. At the end of installation, I got a message in a dialog box. "" Device iDRAC7, Application: iDRAC7 could not access Virtual USB Device "and then the following message in the upgrade of the firmware Installer information window" "" This message can be ignored"with many things on the R2 IPMI driver. My problem is that the Dell OpenManage Server Administrator noted the old firmware version number. I reset the iDRAC from the C: prompt to soft help from "racadm racreset" who have reported success. It made no difference. I emptied my cache of browsers as well. Any ideas how can I know if my firmware has actually been upgraded?

  When I googled the error message my own post came first on the list!  So I thought that I had better do a update.  After finally move to try to solve this problem (again), I opened a case of pension with DELL.

  There is now another more recent version if the firmware of the iDRAC. 1.66.65

  I downloaded and installed, but it failed with the same error on "Failed device to access virtual USB".

  The nice guy of support counted Dell that it is due to an incompatible BIOS version.  I currently have 2.0.22 and the latest version is the 2.3.3.  Then I spoke for her.

  I have successfully installed the BIOS update, requiring a reboot.  I then had another go to the update of the firmware to iDRAC to 1.66.65 and this time it worked WHOO HOO!

  Now wait us and see if real problems connection problems are solved.

  I'm quietly confident.

  Hope this helps someone else

  David

• Digital TV suddenly does not work. Problem updating firmware?

  Hi everyone, I hope someone can help!

  A few months ago, I bought my Bravia Sony 4 K KD-43X8309C at the beginning of August and it worked great. Everything has been fine. I'm going to turn it on this morning (Sept. 30) and have no digital TV, the picture is just empty. TV otherwise works great, Internet, YouTube/Netflix is all good, just Digital TV. Strange I never changed any settings.

  I did some research and realized that today ' today is the release of the new Firmware which I think my TV has automatically downloaded and now not working not just for some reason any. Is there a problem with the Firmware as its quite by chance that the problem started exactly when it was available. I hope you can help!

  All fixed, I went into settings/Factory Reset and erased all settings and put in place from the beginning. Must not uploaded the Firmware correctly but made the second time around.

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.

• Update firmware on Satellite A200-1gh - noise emissions under Linux

  Hello

  I have a serious problem with the sound on Toshiba laptop. Many people have the same problem I have.
  An example:

  ________________________________________
  Hi there everyone
  straight to the point, I got no sound running ' bt3 beta computer laptop - Toshiba satellite a200 - 14 d, HD audio - Realtek ALC862 @ Intel 82801GBM ICH7-M - audio. I tried to fix it with a blender Kmix or alsa, even downloaded the Realtek driver name and installed, but bt3 built in Realtek driver. Still nothing"
  ________________________________________

  My laptop contains this sound card: 00:1 b. 0 Audio device: Intel Corporation 82801 G (ICH7 Family) High Definition Audio Controller (rev 02) @ Realtek ALC861-VD. There is a problem somewhere in the firmware of this map or the Linux kernel.

  We use Backtrack 3 who is Slax based Linux distro.
  I've been with many professional talking about Linux, Bud, no one is really sure what is the problem. They said several things to try; one of them is updated firmware. I've never done this before, I'm looking for help.

  Number of exact model of my laptop is Toshiba a200-1GH psaece

  Please help if you can

  > There is a problem somewhere in the firmware of this map or the Linux kernel
  What are you talking about boyfriend? This firmware of the sound card that you hear?
  I think you're confused.

  First of all there is NO firmware for the sound card. Second, the sound card is controlled by sound driver.
  Always is it that Toshiba laptops are preinstalled with Windows OS.
  Linux is not supported at this time, and you won't find driver for sound card for Linux.

  If you need a sound driver for this sound chip, you will need to download it from Realtek Web site!

  That s all about your firmware to his mysterious map.

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• Need help to update BIOS on Satellite P200D - 11L

  I have a portable satellite P200D - 11L. I have a problem recently with my FN key is not working and a few problems with my camera. My BIOS version is 1.00, and I saw that there is a version 1.2. Although I downloaded the update when I went to unpack, I have seen that there are 2 versions of it. We called Setup and another called Setup64.which one should I launch?

  Any help would be extremely useful.

  Thanks in advance.

  Hello

  I guess you have 32-bit of Windows Vista or Windows XP 32-bit installed and not a 64-bit operating system.
  Thus, it would be optimal to install program installation and not Setup64. If you install the Setup64 your won´t OS works as it should.

  Welcome them

• Problem updating BIOS on Satellite C660-28J - fail check project ID

  Hello

  I have a problem with the update the BIOS on Toshiba Satellite c600-28j.
  Error: The project ID Verification fail

  Model: C660-28J
  Part #: PSC1NE-01200XRU
  Series: XB063018K
  BIOS version: 1.10
  OS: Windows 7 Pro 32-bit SP1

  What can you recommend?

  Thank you.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64817

  BIOS Toshiba Australian page should work

• Win7/Satellite P200D - Admin Login - problem with keyboard - password is not displayed

  Hi all

  My Satellite P200D has Vista Premium o/s, was about 5 years old now

  Has worked well enough until the last of three months or more and developed a problem of restart.

  Hit restart button and it stops, then after several attempts get it at startup and on the screen that shows the internal PC Repair or Normal startup mode option. The only way that I can get to the login screen is to click on Normal mode as the automatic repair option does not work.

  Has decided to switch to Win7 to see if that would solve the problem.

  Now there is another problem, and it's the login admin password screen. The cursor flashes and any attempt to type password does not visibly show the words you type.

  Also tried and external usb keyboard does no difference

  Help, please

  Thank you

  I have the Satellite P200D with Win7 32 bit and it works perfectly.

  You have this keyboard problem when you start the operating system in safe mode?

• Satellite P200D-137 - suspected of BIOS update failure

  Hello

  My friend asked me to watch his old Satellite P200D of 2 days. He decides to perform the recommended Toshiba updates, after leaving the machine (plugged) and return after about an hour, he was off.

  Now switch on the machine causes a black screen with just the hard drive, fans and dvd burner, turning the power on. This being the case, I feel, it was a BIOS update he did this failed. Is it possible to recover from this at all?

  Thank you

  You know with certainty that it was done. If the BIOS update is screwed up, it can be problematic, and I'm afraid there is nothing you can do alone and without service.

• Satellite M40-101 cannot update firmware

  I tried to update firmware for my dvd - rw on M40-101 laptop drive, but when I start the program it says only "the target disk is not connected". What to do with it? the problem is perhaps cause firmware for dvd - RW drive Matsu * a UJ-831, but the model is actually UJ - 830B?

  Post edited by: ruselok

  Hello Ruselok

  Where did you find this update of the firmware? This firmware update is given by Toshiba?