problem when running on the device...

Hey everybody,

I recently finished writing an application, and I installed it on Bold 9700 device. It works very well. However, as the

I navigate through the screens through buttons, a menu list opens for each screen. Its boring as each screen appears with a list of the menu.

Is there a way to prevent this arise?


Show this message to check if this is the same problem.

Tags: BlackBerry Developers

Similar Questions

  • Impossible to determine the returned PID of launch when running on the device IDE 10.2 2.0

    It started just happening whenever I have try and run / debug for my device running 10.2. Tried the obvious restart / reboot... updated to 10.2... Update IDE to 2.0... Still nothing... No logs, error codes, nothing, just that the error!

    Lost a day to him already!

    Someone at - it had a similar problem and resolved it?

    But it looks like I found the solution!
    Just go to "Run" > "Run Configurations...". " on the tab 'Upload' in the 'Deployment' section select 'Install the app bar file' , then 'Apply' and 'Run'
    Do the same for the Configurations Debug...
    After that, I can running or debugging my application!

  • Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device

    Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device.

    iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective.

  • When I open the Device Manager there is no ' sound, video...» "in the menu. What should I do for intal vista audio output device?

    My computer says "no audio output device is installed" when I open the Device Manager there is no 'sound, video game... ". "in the menu. What should I do to get a new installed audio device?



    1. What is the brand and model of the computer?
    2 did you and changes before the show?
    Method 1:
    I suggest you open recognition of the device by using Device Manager.

    (a) click Start and type Devmgmt.msc, and then Enter. The Device Manager window opens.
    (b) click on your computer as the location for the scan.
    (c) on the Action menu, click Scan for hardware changes.
    (d) to close the Device Manager window, and then restart the computer.

    Method 2:
    You can try to download and install the latest drivers for the sound from manufacturing sites and check.
    Check out the following link.
    Updated a hardware driver that is not working properly ' t-work correctly
    Method 3:
    You can see the following link.
    No sound in Windows

    For reference:
    It will be useful.
  • InDesign extension is not displayed when run via the option "Debug as".

    InDesign extension is not displayed when run via the option "Debug as".

    Hi all

    I worked on an application InDesign Extension for a few months now. I am Member creative cloud. I FlashBuilder 4.6 + Extension Builder 2.1 (both licensed versions) and InDesign CS6 and CC installed on my machine. The application is targeted for InDesign CS 5.x and 6 CS and CC versions. So far, I've tested it via "run as" and "Debug as" options of the FB; and in time, I "export as" ZXP for internal versions.

    I'm having two problems, do not know if they are related.

    1. when I try to bundle manifest, it fails with the following error: (at first, I thought it was an installation problem, but I did another test project and bundle manifest works on that one)

    Could not open the Editor: an unexpected exception was thrown.



    at com.adobe.cside.ui.editors.pages.MainBundlePage.isPointProductSupported (unknown Source)

    at com.adobe.cside.ui.editors.pages.MainBundlePage.createTargetAppSection (unknown Source)

    at com.adobe.cside.ui.editors.pages.MainBundlePage.createFormContent (unknown Source)

    to org.eclipse.ui.forms.editor.FormPage$

    at org.eclipse.swt.custom.BusyIndicator.showWhile(

    at org.eclipse.ui.forms.editor.FormPage.createPartControl(

    at org.eclipse.ui.forms.editor.FormEditor.pageChange(

    at com.adobe.cside.ui.editors.BundleManifestEditor.pageChange (unknown Source)

    at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(

    at org.eclipse.ui.forms.editor.FormEditor.setActivePage(

    at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(

    at org.eclipse.ui.internal.EditorReference.createPartHelper(

    at org.eclipse.ui.internal.EditorReference.createPart(

    at org.eclipse.ui.internal.WorkbenchPartReference.getPart(

    at org.eclipse.ui.internal.EditorReference.getEditor(

    at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(

    at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(

    to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (

    to org.eclipse.ui.internal.WorkbenchPage$

    at org.eclipse.swt.custom.BusyIndicator.showWhile(

    at org.eclipse.ui.internal.WorkbenchPage.openEditor(

    at org.eclipse.ui.internal.WorkbenchPage.openEditor(

    at org.eclipse.ui.internal.WorkbenchPage.openEditor(

    at (unknown Source)

    at org.eclipse.ui.internal.PluginAction.runWithEvent(

    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI

    to org.eclipse.jface.action.ActionContributionItem.access$ 2 (

    to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (

    at org.eclipse.swt.widgets.EventTable.sendEvent(

    at org.eclipse.swt.widgets.Display.sendEvent(

    at org.eclipse.swt.widgets.Widget.sendEvent(

    at org.eclipse.swt.widgets.Widget.sendEvent(

    at org.eclipse.swt.widgets.Widget.sendEvent(

    at org.eclipse.swt.widgets.Widget.notifyListeners(

    at org.eclipse.swt.widgets.Display.runDeferredEvents(

    at org.eclipse.swt.widgets.Display.readAndDispatch(

    at org.eclipse.ui.internal.Workbench.runEventLoop(

    at org.eclipse.ui.internal.Workbench.runUI(

    to org.eclipse.ui.internal.Workbench.access$ 4 (

    to org.eclipse.ui.internal.Workbench$

    at org.eclipse.core.databinding.observable.Realm.runWithDefault(

    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(

    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(

    at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start (FlashBuilderApplication.ja goes: 108)


    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau

    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 79)



    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(

    at java.lang.reflect.Method.invoke(

    at org.eclipse.equinox.launcher.Main.invokeFramework(

    at org.eclipse.equinox.launcher.Main.basicRun(


    Here is my manifest file:

    <? XML version = "1.0" encoding = "UTF-8"? >

    < ExtensionManifest Version = "2.0" ExtensionBundleId = "ConnectXPress".

    " ExtensionBundleVersion ="1.0.0"xmlns: xsi =" ">

    < author >

    <! [CDATA [Swati Sisodia]] >

    < / author >

    < ExtensionList >

    < extension Id = "com.pubpress.CXP.extension1" Version = "1.0" / > "

    < / ExtensionList >

    < ExecutionEnvironment >

    < parameter Listehotes >

    < host name = "IDSN" Version = "7.0" / >

    < host name = "Clement POUPARD" Version = "7.0" / >

    < / parameter Listehotes >

    < LocaleList >

    < Locale code = 'All' / >

    < / LocaleList >

    < RequiredRuntimeList >

    < RequiredRuntime Name = "CSXS" Version = "2.0" / >

    < / RequiredRuntimeList >

    < / ExecutionEnvironment >

    < DispatchInfoList >

    < Id = "com.pubpress.CXP.extension1 extension" >

    < DispatchInfo >

    < resources >

    < SwfPath >./ConnectXPress.swf < / SwfPath >

    < / resource >

    life cycle of the <>

    < AutoVisible > true < / AutoVisible >

    < / life cycle >

    < UI >

    Panel < type > < / Type >

    ConnectXPress < menu > < / Menu >

    < geometry >

    < size >

    < height > 520 < / height >

    < width > 350 < / width >

    < / size >

    < / geometry >

    < icons >

    < Type icon = 'Normal' >./icons/normal_icon.png < / icon >

    < Type icon = "RollOver" >./icons/rollover_icon.png < / icon >

    < Type icon = "Disabled" >./icons/disabled_icon.png < / icon >

    < Type icon = "DarkNormal" >./icons/dark_icon.png < / icon >

    < Type icon = "DarkRollOver" >./icons/dark_icon.png < / icon >

    < / icons >

    < /UI >

    < / DispatchInfo >

    < / extension >

    < / DispatchInfoList >

    < / ExtensionManifest >

    2. my other problem is, I recently changed the name of the project and the name of the application in the Menu, and since I did that, my extension is not displayed when I perform "run as" or "Debug as" Flash Builder. To enforce as / debug as, the code compiles and appears in the folder "bin-debug", the application is triggered, but when I navigate to Windows > Extensions, my extension is not present here. Although when I export as ZXP and install via Extension Manager CS 6 or CC, it shows my last extension in Windows > Extensions with the correct name.

    Any help is very appreciated. Please let me know if I need to provide more information.

    Kind regards


    I've solved both of my problems. And I thought I'll post for others.

    First problem, where the manifest failed Bundle of FlashBuilder, was resolved by a change in the manifest.xml (who lives at /.staged-extension/CSXS). The change I made was tag. Earlier it was (generated by FlashBuilder 4.5):

    I changed it to:

    I did a bit of hit and trial and it seems that FlashBuilder generated 4.5 tag host with the Version with only the specialties of the minimum version while FlashBuilder 4.6 requires that all versions of specialties listed in the Version attribute.

    The second problem of debug/run as not to install the extension properly in InDesign, has been set as a result of the software update of FlashBuilder.

    This is what brought me to do:

    I retraced my steps and realized last thing I did before the "Debug as Adobe InDesign Extension" of in FlashBuilder broke on my machine has been updated InDesign CS6 to the latest available version, which probably ended up with flash/flex versions of InDesign and FlashBuilder. Therefore, perform a fixed update debugging.

  • whenever I open the creative cloud, it says I'm missing something, and I need to download again. But it says the same problem when I open the new download. Help!

    whenever I open the creative cloud, it says I'm missing something, and I need to download again. But it says the same problem when I open the new download. Help!

    Please uninstall creative cloud:

    Uninstall or remove Adobe Creative Cloud applications

    Reinstall it:

    Download Adobe Creative cloud apps | Free trial of Adobe CC

    I hope this helps.


    Megha Rawat

  • I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results

    I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results to laye

    I answered your question: there is nothing you can do in InDesign. You need to ask in the Acrobat forum I linked.

  • There is a problem when I installed the Dreamweaver

    There is a problem when I installed the Dreamweaver.  He said that there is a mistake in there. I don't have this problem when I installed illustrator and photoshop. What should I do? Why Dreamweaver does not start.

    We do not know. You haven't, tell us what error it is actually neither provided any information from appropriate system or other technical details.


  • I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope y

    I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope you find a solution for the same. Help with the help of Adobe Muse CC

    Liston Hi,

    Steps to follow:

    1. Try to make a new complete site structure in MUSE and try to add a few pages and tries to remove it, just to check its not having not problem
    2. If the problem persists even, check if your site is stored on the external hard drive. Note: site should be registered on internal hard drives.
    3. Try to revive the MUSE, if the problem remains the same, we will refresh the preferences of MUSE.

    Hope it will work.

    Thank you

    Prabhakar Kumar

  • Code to change the password when running in the world of form

    Hi all

    Have someone to help me how to set the code change password when running at the global scale of a form?


    the easiest way, try something like this.

    forms_ddl('alter user '|| v_user || ' identified by '|| :block.item );
    if form_success then message('password changed');
    message('password not changed please try again');


  • Windows 8 crashes when running 'find the hardware changes' in the Device Manager, requiring forced stop

    I just installed Windows 8 Pro on a system that were running Windows 7 without problem.  After completing a clean Windows 8 Pro Setup program, I went from hollow driver installation, but found the package to install for my card its caused Windows 8 Pro drivers to lock up and become completely numb.  I had to force a shutdown by pressing the button for 4 seconds.

    Trying to solve the problem, I found that manually install the drivers through the device manager didn't cause any problems.  In addition, installation of the drivers available through Windows Update also worked without problem. However, these two methods fail to install parts of the pilot training included him.  Then I have to uninstall the device from the package of drivers again.  I uninstalled the sound card via Device Manager and selected "Delete the driver for this device."  When I followed this with a "Scan for hardware changes" again the list my sound card, I have found that Windows 8 Hung again.

    After trying other options with no resolution, I tried to reinstall fresh Windows 8.   To exclude a possible problem with Windows 8, I opened Device Manager, as soon as I could after installing Windows and ran "find the hardware changes.  New Windows 8 freezes.  I can't place blame on post installation any software or driver.  This seems to be a problem with Windows 8 itself.

    A final note, sometimes "find the hardware changes" will actually work, but most often it forces the system to hang.

    Does anyone else have this problem?  Can anyone provide assistance? (chart below for comparison)

    Processor: Core i7 3770 k

    Motherboard: MSI Z77A-GD80

    RAM: 16 GB

    Video: GeForce GTX 680

    Audio: Creative Sound Blaster Recon3D

    HARD drive: 1 x Corsair Force SSD 3

    RAID: 3 x 1 TB RAID 5

    It seems that I am victim of dynamic ticks.  Research on my question, I have found several discussions around the ' net for crashes/freezes random in Windows 8, but none of them appeared to agree to my problem.  However, they all had the same solutions.

    Run the following command in a command prompt to disable the dynamic ticks.

    bcdedit/set disabledynamictick Yes

    I thought that I have that would give a shot, and it worked.  I wrote this answer, I also found that there is a recent update of the BIOS for my motherboard which indicates "Support Windows8 feature."  With the new BIOS applied, I was able to turn dynamic ticks and have been broadcast since w/o freezes.  I also managed to install all my drivers.  Anyone else having this problem maybe try updating the motherboard BIOS, otherwise try the above command.

  • Activity monitor close unexpectedly when running in the background on the left

    Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

    Activity monitor also using a lot of energy since the upgrade?

    Any help would be appreciated. Thank you.

    Model: MacBook Pro (retina, 13 inches, early 2015)

    OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

    Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

    If you have moved a previous version to a different location, it will not work.

    If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

  • sound problem when I use external devices

    When I use a headset, earpiece or bluetooth that I distorted sound. I'm buzzing, distorted. I used external devices cannot all ofa suddenly be a problem of my phone head etc. He plays well without external devices.

    Poor quality through the headphone jack can be caused can be caused by dirty or damaged jack.

    Try to clean the headphone jack.

    For other outputs:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset the headset/BT BT device

    -Reset network settings: settings > General > reset > reset network settings. You will have to join the networks wifi and re-pair the BT device

    -Restore from backup. See:

    iOS: how to save

    -Restore factory settings/new iOS device.

    If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • Screen touch problems when you use the converter

    We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

    Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

    We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

    So after much googling and some reading I'd like here to answer fo HP.

    As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

    What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

    Any advice would be received with gratitude.

    Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

    We have it finally working outside a performance of the inverter with number.

    But I have to say without any worthy of official telephone hotline support of HP.

    Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

    Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

    The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

    OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

    I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

    In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

    This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

    If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

    Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

    Thank you all.

  • Problem when running of several blocks of entire function


    I'm building a great system/function using LabVIEW. Therefore, to practice and make look it tidy, I create a VI of blocks to separate and combine certain functions. But, my problem is when I did, the simulation seems to work really slow and the results are different compared to when I had the whole function/system in a single block.

    For your information, every VI blocks that I created has a loop control and simulation. When I have all interconnected, I put them all in another loop control and simulation, because some functions that I use to connect them together could not be used without the loop.

    Wondering if having a loop control and simulation in every block contributes effectively to this problems as each loop will run depends on the number of time that I put in the loop.

    If it doesn't matter which method to avoid this problem happen? My system/function looks terribly messy and it will be difficult for me to present no later than at the end of my project.

    Thank you.


    I think what you are trying to achieve is to use simulation subsystem functionality. This allows the functions to execute outside a loop of simulation so that you can create a Subvi. After selecting the functions in your simulation loop you would like to be in a Subvi, select Edit» create Simulation subsystem. Let me know if that helps!

    Also, here is some information for this:


Maybe you are looking for