problem with 4.52/5.12 connection access on t41

Similar Questions

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Problems with Win 7: lost internet connection and downloads

  Hello

  I'm not sure that the two problems are related... I don't know what topic to choose.

  I have a custom, with Win 7 machine, and I install all required updates. But for a while (months? I turn it off every night) it says 15 updates are available every time that I reboot, and I see no updates installed (I search for installed updates today).

  Anyway, let them go all the way, and when I restart, I have no connection. It's happened several times (everytime I reboot). Maybe that I had the chance to solve the problem by restarting (and reinstalling :)) 15 updates, but today I can't. I am connected by wire to a modem. Our all other computers work.

  I have a job in the process and need my internet connection (easier to work on a desktop computer with large screen of a laptop) and I can't.

  In network and sharing Center, there is a cross between 'Several networks' and the internet. I have the message if I 'connect or disconnect' "no Internet access.

  I did ipconfig, and I get media disconnected. I did not unplug anything!

  I would be very grateful for your help.

  Thank you very much

  Hi Allwyna,

  Thanks for the reply.

  As you said, there are 16 updates that never completed the installation. There could be opportunities updates are at the origin of the problem. So before solve us the connection problem. We should go ahead and first to solve the problem of updates.

  I would like to know you have installed any Security Antivirus software on your computer, if so I first suggest you temporarily disable the Antivirus software install on your computer and check if that helps.

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  Try the methods.

  Method 1:

  I suggest following the steps listed in the article and check if it works.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 2:

  I suggest you to manually reset windows update components.

  http://support.Microsoft.com/en-us/KB/971058

  NOTE: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

   

• Problem with laptop Pavilion dv6 wireless connection

  I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

  The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

  Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

  The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

  I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

  Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

  I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

  Any suggestion would be appreciated

  I had a very similar problem with Tablet Dell Latitude slate ST of my son.

  He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

  I saw on the Dell forums, a lot of people complain about this card.

  I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

  So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

  I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

  The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

  If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

  Kind regards

  Paul

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• problems with hp printer photosmart d110 - connectivity

  More often than otherwise, I'm going to print to this printer from one of our laptops wireless and it won't print.

  Whenever this happens, and I run a wireless test, the printer is still fine.

  The printer appears in my devices window and seems to be fine.

  Troubleshooting never translates into a response.

  Usually, when this happens, the spooling print window that displays the status of print jobs says that the printer is offline.  I removed the checkmark next to "use printer offline" last time it was is past, and that it's worked.  I had tried before anything will do, but thought that perhaps it has been fixed once for all this time.  Especially since I saw in another post this fixed the problem of someone else.

  Tonight, it doesn't print, says nothing about being offline, but just says: "error" in the status column.  No other information.

  At the top of the list in the window where I can put as a default value, select this option for use in offline mode, etc., the word 'connect' appears.  It is not an option... the word is gray when all the other words are in black characters, and clicking it has no effect.

  I can always choose the printer of course, he sees the laptop on the network and it seems normal until you try to print.

  It doesn't seem to matter what laptop that I use, I'm having this problem with both.  I also had problems similar with this printer using any other wireless and portable.  So I don't think that it's the laptop, operating system, or anything with the network, just the printer itself.

  Suggestions?  I wish that there is a quick fix.  I'm starting to think that it is defective.

  Hi SRS12,

  Is model # D110 you printer a or b?  Here are some steps I take for a quick solution when a printer was working wireless and suddenly quit.

  1. Make sure that the print queue is empty.  If delete you it, or if it was already empty and you can not print, take the next step.
  2. Download and run HP Print and Scan for Windows doctor.  If there is no change, go to step 3.
  3. Reset your wireless network, as described in the following link.  Click here

  Let me know the results.

  Good luck!

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Problem with Safe Mode, no internet connection

  Whenever I start in safe mode with networking, I can never connect.

  Hello

  Please answer these questions so that we can better understand the issue.

  1. are you able to connect to the internet when the computer starts normally?

  2. is it a cable or a wireless connection?

  3. is there something specific that you are trying to do it in safe mode?

  Please try the troubleshooting on this article and check if it solves the problem.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know if it helps or if you need further assistance.

• Problems with Flash Player 11 and Flash Access 2.0

  Hi, we saw some problems with the last Flash Player 11 RC (6 September 2011) and Flash Access 2.0. We do not realize that it is a RC, but we thought it would be useful to raise this issue anyway.

  When contacting the license server that Flash Player 11 made a request to the url/getServerVersion/v3, since this end point is not implemented at the request and the license acquisition failed. Endpoint getServerVersion appears to be introduced with Flash Access 3.0 and not something we can implement in our current configuration with Flash Access 2.0. Flash Player 11 will be compatible with Flash Access 2.0? If so, what to do, we do to solve this problem?

  Thank you

  Johan

  Flash Player 11 sends getServerVersion demand to determine the features of the Flash Access License Server. If you run a server 2.0, it should return a HTTP 404 error, because it does not support this endpoint. The client understands that it communicates with a server Flash Access 2.0, and transmits the application accordingly. In other words, the fact that your server 2.0 does not support getServerVersion shouldn't the license acquisition failure.

  Your server responds to the request of getServerVersion with a 404 error? After the request of getServerVersion arrives at your server, you should see another application for a license. In your server logs, you will see errors in the treatment of licence application?

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• Problem with video Capture where the connection settings are unavailable

  I have two capture - Dazzle Platinum 100 and Game2 PC cards. The issue is the same with both, so it must be something to do with a setting on my laptop.  I can't access the setting of the video input in the Capture menu of one of the capture software I've tried. I can select the device in the Source menu, but nothing happens when I click on the menus of the video input (the options are missing). As such, I can't select the composite input. The audio seems ok.

  The xbox and tv are connected using a separator and the component drive with connectors yellow, red and white coming on TV and I tried the two Pal 50 and 60 in the settings menu of xbox. I have set the settings to capture PAL and have also tried all the others.

  I also disabled the webcam and uninstalled the webcam software in the case which has been cause of conflict. The dazzle card detects an entry but cela there is no picture, just a white screen with lines. The dazzle card also caused regular dumps while the Game2PC only gives the incorrect parameter error 0 x 80070057/11878 they both.

  I've now provided all that may be in conflict has been uninstalled. I tried to change the capture settings and they are not available. Device Manager checked again and it appears Windows detects the device as device not video and Audio. Why would you think?

  I solved this by downloading a new driver from the manufacturer's website. The disk driver provided seems to have been inconsistent with Windows and caused the device to be considered an audio device only. Windows drivers has also caused this problem.

• Intermittent problem with IP addresses and internet connections dropped

  Once a day or so my PC (Win7) will not be able to access the internet. Connection just drops. I use DHCP for IP addresses.

  As far as I can see in the Event Viewer I get these types of errors "the address lease IP 192.168.1.64 for the network card with network 0x406186808C4C address was rejected by the 192.168.0.1 DHCP server (the DHCP server sent a DHCPNACK message)."

  My local network is simply: PC-online router (Cisco E1200)-online internet (modem Siemens SpeedStream 4100 DSL)

  "When this happens, we run ' ipconfig - release 'then' ipconfig - renew." This usually fixes the problem. Sometimes, this does not solve the problem, and we need also the modem power cycle. In a few minutes find us the internet connection. It's nice to have a manual correction, but we want to solve this problem to happen... as is the engine of our family crazy...

  The address LAN IP of the modem is set to 192.168.0.1

  The address LAN IP of the router is set to 192.168.2.1

  When things are running OK, I usually see it in the ' ipconfig-all the ' results: = 192.168.2.147 IPv4 address (Preferred) [but the IP numbers change slightly] my understanding is that see "Present" in the result is a good thing (but I don't know why...).

  Any thoughts on what is happening? and how to permanently solve this problem?

  I'm also confused on IPv4 and IPv6. Should I be concerned with any information of IPv6 in the ipconfig-all the results?

  Thanks for the help

  Talked with the ISP (ATT). Zig - zag, you were on the problem. I had both modem and router set to DHCP mode... so I had some conflicts. The solution was to define the "bridge mode" dsl modem and configure the router to "PPPoE mode. Everything works now. Thanks for your help.

• Problem with Web Builder and MySQL connection

  Hello

  I created a web service VI (see picture attached) to connect my Web Builder application with a MySQL database. The problem is that I get nothing on my exit signs during the call to the web service VI.

  Some tests I've done:

  (1) this web service VI works perfectly (I mean indicators 'value', 'status' and 'data_hora' give the desired result) when the VI run directly through LabVIEW. MySQL connection and my VI are OK...

  (2) I know my web service VI was successfully built and deployed because the indicators give me some value if I sign something for them other than my SQL output

  (for example: if I put a string constant "Hello" on indicator "valor" I get "Hello" when calling the web service VI)

  I suppose that the database connectivity kit is not supported when a VI is integrated with a web service VI. In my case, kit screws are inside the subVIs 'start', 'exec 2d' and 'stop' showed in the picture as an attachment.

  Any idea?

  Thank you

  Marcelo

  

  I'm using LabVIEW 2001 Wesley, but I solved my problem.

  It was just a MySQL data source problem: I just had to add my info DB through C:\Windows\SysWOW64\odbcad32.exe.

  Thank you

  Marcelo