Problem with a clean install of Windows 7

Similar Questions

• Synchronization problems with the clean install

  Hello.

  Is it possible to push the content of my iPhone to my computer? (and not the other way around)

  Recently, I did a clean install on my Mac Pro and trying to get everything in working order. I got a load of music and voice notes on my iPhone that I don't want to lose, but the only way iTunes will allow me to manage the content of my phone is erasing all the content on my phone to sync to the 'new' library

  Help, please!

  Thank you

  A new installation of the operating system shouldn't have deleted personal data files unless you want to say that you have done more than a "clean install". You do not install the data files.  Looks like that erase you the iTunes library file and it was a big mistake because it is towards this specific copy of the file iTunes Library.itl that tries to sync your phone.

  Your i-device was not designed for unique storage of your media. It is not that a transfer backup device and media has been planned with you keep a master copy of your media on a computer that is in itself independently supported against loss.  To use a device with a different configuration, you pass the old library from a computer or a backup directly in the new configuration, not the device to the library. Synchronization of media isn't a way, computer device, update the contents of the device to the content on the computer, update or restore the content on a computer from a device. The exception is media to iTunes Store purchases that can be transferred to a computer.

  Re-download or transfer your purchases iTunes Store for the iPhone, iPad or iPod to computer - https://support.apple.com/HT201267 - 'this feature only works for content purchased from the iTunes Store. From iOS9 is more apps that now need to be re-downloaded directly from the store.

  To transfer other items from an i-device to a computer, you will need to use third-party commercial software.  See this document in turingtest2: recover your iTunes library from your iPod or device iOS - https://discussions.apple.com/docs/DOC-3991 even this method can fully recover what you originally had in the library. For example, in order to save space during synchronization if you had converted music files at a lower rate, or photos at a lower resolution, it is these lower quality files that will pick you up.

  If you subscribe to the Apple music, titles that are not part of the content that you have purchased or downloaded may not be transferred and must be downloaded directly from iCloud.

  To see other items: import photos and videos from your iPhone, iPad, or iPod touch - https://support.apple.com/HT201302 - are those you have taken yourself.

• 4 wave Max Audio went with a clean install of windows 8.

  Hi, I recently put Inspiron 14 3421, it came with Windows 8 and Wave Max Audio 4 per-installed software. The product I have had question so I handed the centre of authorized Dell service here, so for service purpose DASC uninstalled guy OS and re-installed but after re-installation, I couldn't find Wave Audio Max 4 software. Could you let me know how to reinstall the software Max Audio 4?

  Hi sadanand.pathak,

  Waves MaxxAudio 4 part of the audio drivers.  I suggest you to download and install the Audio drivers. Click on the http://dell.to/15DgOwU link-> choose the operating system-> expand Audio to download and install the drivers. In addition, extend your Application and install The Application Dell Quickset.

• Need help with a clean install of Windows 8 on Satellie A200-1MD

  Hello

  I want to install windows 8 on my current model of the laptop A200-1MD, but once I put the cd in the drive and restart the computer, it just does nothing, even when I press on delete. Can someone help please how windows installation 8 menu start?

  Thank you very much!

  You start from the disc Win 8?
  Turn on the device, press F12, and then choose ODD as the boot device and confirm by ENTER.
  Now computer laptop should boot from the disk

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• (Redirected) if I do a clean install of windows 10 with 64 bit OS?

  I recently did a clean install of windows 10 using the tool of media (I updated to 10 before the clean install and used my product key). I noticed that he installed a 32-bit windows 10 OS. I believe that my laptop has a 64 core processor and I wonder if I should have installed a system of operating windows 64 bits instead of 32 bits. I also wanted to update my RAM memory, which now 6 GB (2,40 GB usable). I have 2 RAM sticks, one with 4 GB and one with 2 GB.

  My questions are:

  Should I do another clean installation with a 64 bit 10 OS?

  My laptop is able to do this?

  What is the maximum amount of RAM, this laptop can hold?

  Thank you!
  

  I list the specs I can find on my computer:

  Processor: Intel (R) Core (TM) i5-4210U u 1.70 GHz 2.40 GHz CPU
  Installed memory (RAM live): 6,00 GB (2,40 GB usable)
  System type: 32-bit operating system, x 64 processor
  Pen and touch: Touch Support with 10 Points of contact

  ' NWMX1 1 DUAL IN-LINE MEMORY MODULE, 4GB, 1600, 1RX8, 4 G, DDR3L, S.
  ' TX3GV 1 DUAL IN-LINE MEMORY MODULE 2 GB, 1600 1RX16, 4 G, DDR3L, S.

  CK4DP: MOD, SW, DPK, WB32/64
  Part number
  Quantity
  Description 1 DPK, operating SYSTEM, WB32/64 TMTN1

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• 5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  Check space abailable, etc.. "Worked OK on Windows 7 64 bit.  400 GB of available space.

  5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  "Check available space, etc. and the privaleges of Scripture on the destination folder. Worked OK on Windows 7 64 bit.  400 GB of available space.  Tried changing the compatibility of Wiindows 8 and 7, but same problem.  I am the administrator, so there should be no problem of privileges.

  Clear your tmp folder.

  Restart your computer

  replace.

• -clean install of Windows 7 - driver dv9266ea problem

  I did a clean install of Windows 7 Pro on my Pavilion dv9266ea and everything went well except there is a single unit report 'unknown' in the currency manager and this is supposed to be located at:

  Intel(r) 82801GBM (ICH7-M/U) LPC Interface Controller - 27 b 9

  How can I solve this problem / install the correct drivers?

  Buttons lunch fast HP here (ver. 6.50.5.1)

• I do a clean install of windows 10 with 64 bit OS?

  I recently did a clean install of windows 10 using the tool of media (I updated to 10 before the clean install and used my product key). I noticed that he installed a 32-bit windows 10 OS. I believe that my laptop has a 64 core processor and I wonder if I should have installed a system of operating windows 64 bits instead of 32 bits. I also wanted to update my RAM memory, which now 6 GB (2,40 GB usable). I have 2 RAM sticks, one with 4 GB and one with 2 GB.

  My questions are:

  Should I do another clean installation with a 64 bit 10 OS?

  My laptop is able to do this?

  What is the maximum amount of RAM, this laptop can hold?

  Thank you!
  

  I list the specs I can find on my computer:

  Processor: Intel (R) Core (TM) i5-4210U u 1.70 GHz 2.40 GHz CPU
  Installed memory (RAM live): 6,00 GB (2,40 GB usable)
  System type: 32-bit operating system, x 64 processor
  Pen and touch: Touch Support with 10 Points of contact

  ' NWMX1 1 DUAL IN-LINE MEMORY MODULE, 4GB, 1600, 1RX8, 4 G, DDR3L, S.
  ' TX3GV 1 DUAL IN-LINE MEMORY MODULE 2 GB, 1600 1RX16, 4 G, DDR3L, S.

  CK4DP: MOD, SW, DPK, WB32/64
  Part number
  Quantity
  Description 1 DPK, operating SYSTEM, WB32/64 TMTN1

  «I noticed that he installed a 32-bit windows 10 OS.» I believe that my laptop has a 64 core processor and I wonder if I should have installed a system of 64-bit instead of 32 bit windows operating ".»

  

  1. What is your Dell model? Example: Dell Inspiron 3048

  2. right click to start at the bottom left of the page, and then click System. Please post back the type System - 32 or 64 bit)

  

• Laptop HP 15-R204NE: clean install of Windows 10

  Hello

  I'm ready to do a clean install of Windows 10 but the only thing that worried me are the drivers provided factory installed with my laptop, it was initially delivered with Windows 64 - bit of 8.1. I don't want to lose one that I have no idea how or where I'm going to do if I lose everything. If someone has a way to understand this help is very much appreciated.

  Kind regards.

  Hello Zarakkhan ;
  
  I read your post on the new install of drivers of Win10 and wanted to help.

  As to the first, the upgrade of active Win10 through something known as right digital, install some sense, when you perform an upgrade on the spot on an existing Win7/8/8.1, upgrade reuses the existing product key for activation.  After you confirm that the machine is turned on, you can THEN do a clean install on the same machine.  IF you do a clean install without activating the first, you will not activate your copy of Win10.

  That said, MS released earlier to a new update to Win10 and (allegedly), you should be able to do a clean install with NEW media made from multimedia authoring tool and have it activate using your product key of Win8.1.  But, I haven't read anyone done this yet, is just a rumor at this point.

  As for save the drivers, there's a product excellent freeware called Driver Backup.  After you download and install it, you can then save out all your current drivers on a USB key.  This will make reinstall them later a simple process. I know it works because I use this product myself.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP MIni 210-2145 DX: clean install of Windows 7, now I can't find the wireless drivers that work.

  I have a HP mini 210-2145 DX.  I recently had to do a clean install of Windows Ultimate edition.  Now, I can get a wireless connection because I can't find the right drivers on the HP site.  I tried 12 + drivers that I downloaded.  They all seem to be for 32 bits, and it's 64-bit.

  Can someone please help me find the right wireless drivers to install?  Thank you.

  Try this different file and see if it works automatically and installs the driver.

  File name: sp57965.exe

  There was also support for the hardware ID you have posted.

  I have no problem downloading the file, or by using 7 - zip to extract the exe file downloaded to a folder that you can browse from the network controller to install the drivers.

  Unfortunately, I can't help you with the problem if the new file does not work.

• Clean install of Windows 8 on ENVY 4-1195

  Hello

  I buy a FANCY 4-1195 with Win8 preinstalled on it. I need to clean install Win8 Enterprise on it for power to reach the company network.

  I boot from the CD, goto custom Setup to do a clean install of Windows on the new PC, but when I get to install Windows I get this error message:

  We have found all the disks. For a storage driver, click on load a driver.

  When I click on

  I get the message:

  No signed device not found driver. Make sure that the installation media contains the correct drivers...

  When I try to browser only see us D (DVD) drive and drive X: (Boot) and no C: drive.

  Thanks for your help

  The system uses something of a RAID configuration, because it doesn't have an Intel RST and a Smart Connect pilot.

  The problem is that I don't have access to a copy non - OEM Windows 8 to test the manual installation of the driver Intel RST or Smart Connect method.

  What is a stock Enterprise of Windows 8 version or a custom image for the company?  If it is a stock Enterprise installation, then the Windows Anytime Upgrade would be an option provided the OEM copy is always available and you know what is the product key.

  However, you can try to extract the contents of the package driver to a USB flash drive and try to manually install one of the drivers (RST or Smart Connect) to see if it makes the configuration of disk HARD visible during the installation process.

  Intel driver for fast ignition

  Intel Smart Connect driver technology

  7-zip

  1. install and open 7-zip.

  2 in 7 - zip, access both downloaded drivers linked above in the post.

  3. right click on each one and choose 7-zip > Archive open.

  4. extract the contents of each driver on an external USB drive.

  5. When you arrive at the selection of blank disc screen during installation of Windows 8, select the option to load drivers.

  6. go to the file Intel RST pilot which was extracted, select drivers and appropriate architecture (x 86 for 32-bit, x 64 for 64-bit).

  7. This can be a process of elimination.  Try each driver (in RST and Smart Connect) until you find one that works.

  8. when the appropriate driver has been installed, then the HARD drive should be visible.

  Let me know what happens.

• clean install of windows XP to input signal out of range

  Hi I recently took my old pc xp out of the dusty closet.
  I discovered that the operating system has been corrupted then decided to do a clean install of windows xp.
  However after that it says press any key to boot from the disk and I press a button, then it went to a screen blank and says on the monitor says "Input Signal out of range at 1280 x 1024 60hrz. change."
  I also did a reset factory monitor and hooked up the old pc to the tv.
  So I would like to know how to solve the problem, any help would be much appreciated.

  Hello

  First you using a discrete graphics card or graphics are integrated with the motherboard? Change BIOS battery (or whatever it is in the BIOS change to any method) will not change anything to do with a graphics card discrete and not likley to do much for either integrated graphics card.

  What it sounds like to me, is that the key to the race to start from the CD is not recognized and that Windows is actually booting from the hard drive with a resolution taken not supported by your monitor. But, being not there, I can't be sure of this so here are some ideas of diagnostic.

  Start the PC without the CD inserted, do you have the same problem?

  The keyboard is correctly connected?

  If a PS/2 keyboard is it plugged into the outlet of PS/2 mouse by mistake (keyboard taken are normally purple, green mouse normally Sockets)?

  Is the keyboard PS/2 or USB? You can try another keyboard ideally with the other type of interface?

  You can get in the setup of the BIOS by the appropriate key combination (usually F2 or DEL but I saw others also, look for the message at startup upwards)? If you can not it would indicate a keyboard problem.

  If you can remove the keyboard as a problem, I would return to my original question on a discrete graphics card. If there is a discreet graphics card, the motherboard is also a graphic? If this is the case, remove the discrete card and try windows set up again. Or even try installing windows with a spare graphics card if you can get your hands on one. Turn off the computer and unplug it from the socket before to remove/replace all internal components.

  Finally, what of the installation CD? Is this the one supplied with the PC? It is the recovery of the real manufacturer CD or CD from Microsoft genuine?

  Tricky