Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI

Similar Questions

• I have a problem with his Acer Aspire XC - 603 G - UW31 HDMI

  I have an Acer Aspire XC - 603 G-UW31.  The only way I can get HDMI audio when it is connected to the TV is with the default Microsoft drivers. Displys cardas graphics Intel HD graphics Windows.

  Display adapter = Microsoft Basic graphics card

  Sound, video controllers andgame = high definition Audio Device / Realtek High Definition Audio

  I tried every fix I can find on the internet, can not find one that works.  Even several different drivers.

  When I install all driver Intel or any driver on the acer site.  I lose the option for the Digital Audio (HDMI) devices read.

  Have a fix for this.

  Thank you

  Today I updated the Bios and it fixed the problem.

• Problem with my acer aspire 5750G

  Hello, good afternoon.

  My problem is that when you turn on the laptop. My monitor shows no sign or there is activity on the hard disk.

  I tried to remove the ram, HDD, the bios battery, connect it to an hdmi TV and still no sign of life.

  I think it's maybe corrupt bios. ¿Steps? Suggestions? help please!

  Sorry for my English (google translate)

  Thank you!

  From your first post, I thought you said when you tried to turn it on nothing happened.

  If it stays on when the memory is removed, but stop with installed, you may have a bad memory dimm. If you have 2 DIMM, try to start with one, then the other.

• I have a DATE TIME / CMOS / BIOS with my Acer Aspire 5742Z problem

  Hello

  Newbie here...

  I have a strange problem with my Acer Aspire 5742Z (UK), which I think may be the BIOS or CMOS area...

  MAIN PROBLEM

  Guard reset BIOS default time (00: 00:00 on 01/01/2009)... OR... a time '' close '' to what it is supposed to be...

  MAIN STEPS IN THE DEMONSTRATION OF THE ISSUE...  WHAT I'VE DONE

  Removed the main battery and then replaced the CMOS battery twice (in the case of a failure)

  Main battery insert it again.

  The clocks of the BIOS (using F2) countless times, but there's rarely / or is correct.

  STRANGENESS...

  During startup in Windows 7, it almost always does not show the same date and time that I entered the BIOS.

  For example, if I go home at 21:35 on August 28, 2014 using F2, when I boot on Windows, the date and time may say August 23, 2014 at 3:25 pm ish...

  POWER OFF

  If I turn it off and turn off and then turn on, restart the time in BIOS is correct... to 21:43 29/08/2014 (that I have record for good measure).

  If I continue, Windows reads now August 23 at 15:32

  ADJUST the WINDOWS TIM E (UK)

  So, then I change the time of Windows Date to Friday, August 29, 2014 21:48.

  JUST FYI: the PARAMETERS of ZONE SCHEDULE are checked and no changes: (UTC), Dublin, Edinburgh, Lisbon, London

  PANEL, LANGUAGE AND REGION, English in the United Kingdom, short time 21:48, short Date: 29/08/2014

  GEOGRAPHICAL area: United Kingdom

  now, everything seems correct.

  TURN OFF AGAIN and wait a few minutes.

  YOU turn it back ON, and then press F2 that (this time) shows the BIOS default date and time in 2009

  If I continue in windows without changing the BIOS date and time dafault, Windows now displays as 23:02 31/12/2008

  :-(

  That's all.

  I would really appreciate help fixing this problem that makes me nuts!

  Thanks in advance!

  ...   Just in case anyone reads this...

  I just updated my BIOS for the next issue, and the problem has.

  I guess that maybe the BIOS got corrupted!

  I used the simple approach and no short layout has been involved.  I deliberately did not go for the latest BIOS just in case where he brought new questions and confused the situation.

  Shaba

• Acer Aspire 5552 no lan or wireless detected

  Trying to work on a pc of the friends, which does not recognize the built in lan or wireless. Device Manager is a material no display wireless or lan. PC running Windows 7, and is now updated on all Windows updates. He recognizes a usb wireless adapter, but has no idea that there is a wireless network and integrated lan, no way to turn, because as windows knows, this pc does not have.  In addition, using a point of restoration after the last time that the owner was on-line, that oldest available, does not change the problem

  Device Manager can't find the material, while showing hidden devices so I'm Virgin to know where to find the drivers and how to uninstall them.

  As above: Some Acers also have a wireless connection, button on / off, so make sure it is not disabled there. I'm not sure if your model or not, but check to see if it is disabled there. It may be "Fn" + "F key" or a real hard switch (that I had on my Acer).

  Alternatively, if this isn't the case, Acer handed incompatible drivers before, you have a 32 or 64-bit?

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Broadcom_5.100.235.19_W7x86W7x64_A.zip?acerid=634408506216820809&STEP1=notebook, 20Ultrabook & Step2 = Aspire & step 3 = % Aspire % 205250 & OS = 702 & LC = en & BC = Acer & SC = PA_6

  I know that this LAN update fixed a few problems of the people in the past who had problems of compatibility with the Acer Aspire 5552-7474, then perhaps you can try try this.

• Just did the upgrade of Windows 10. Think I need drivers for ACER ASPIRE 5552?

  Hi guys

  I'm helping a friend get his ACER ASPIRE 5552 work fine with Windows 10.

  We took a bet that the W7 to W10 upgrade would be ok, but we hit a few glitches to overcome.

  We want to back up as soon as possible once it working properly.

  1.

  Can anyone tell me please where I can get the right driver for Ethernet and WifI because wifi now seems to work fine.

  2.

  But there are ALSO all the other drivers who have updated the 5552 have found it necessary to download and install - for example Chipset, sounds, etc...?  .... Of course, it makes sense that ask us those who've already done...

  3.

  In addition, she has a HP printer, which now does not seem to communicate. I guess we have to go to the site of HP and DOWNLOAD - except - are there known problems?

  Thanks in advance for any help guys

  RattleFizzbang

  > We took a gamble that the W7 to W10 upgrade would be ok >

  Agreed. Now, I suggest that you first check the Win10 Device Manager and note devices and models numbers that seem to have problems. Because the laptop has more working network adapters, you must do a google search from another computer for updated Win10 drivers that you can download for each device problem. For some systems, this can be a long and formidable process. If it were mine, I would upgrade to Win 7 as fast as I could.

  Jack E/NJ

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• What external optical drives are compatible with the Acer Aspire One with Windows 7 Home Premium 722

  What external optical drives are compatible with the Acer Aspire One 722 with Windows 7 Home Premium OS.  I need to make the backup disks and install the CD software.

  Thank you.

  More external ODD will work just make sure it's an external power source. This allows not to take a lot of power to the unit.

• Acer Aspire R7-571 and Pen support?

  Hello, I recently bought an Acer Aspire R7-571 and I wonder if it supports any kind of pen or stylus for the touch screen? I ask this because if that's the case I intend to buy one, but if it isn't... Well, I don't want to waste money and prefer not to buy one only to find out that it doesn't work.

  Also what leads me to believe that it may in fact take supported a pen/stylus, is to do for the parameters in under hardware and sound control panel, where it says Pen and Touch. So yes maybe a stupid question, but I figure it does not hurt to ask.

  Thank you for your time

  You can use the same pens and stylii with your Acer R7-571 as with most Android devices or iPhone/iPad: capacitive standard pens. I use with my R7-571. In General, how to identify the price will be: they should all be less than $20! (In fact, $ 2 mine!)

  R7-572 has an active digitizer under the screen, and so should be an active stylus/pen for her. They start usually from $30.

  More information here. But not much more!

• My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Of course, it sounds like a hardware problem, not a a Windows.
  Contact Acer for repair.

  Ken Blake, Microsoft MVP

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.

• I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.

• Problems with the installation of the bridge and the company

  Hello world!
  I have problems with the installation of the bridge and the company. Although I have install both of them successfully, when I try to connect to the gateway through the console I have error message saying there is no company installed. In fact, I get an error as well through the wizard saying "failed to run. Please see details below:
  
  Unable to launch: "C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\LRE19.tmp\bin\java.exe-Dtemp.dir=C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\ - cp C:\siebelent\siebsrvr\bin\setup.jar run - args LANG = ENU VISIBILITY = REPEAT BUSINESS = FALSE MODE = MODEL_FILE=C:\siebelent\siebsrvr\admin\siebel_server_sia.scm LIVE" error code: ""(SBL-STJ-00152)-1 "»
  
  Also, when I try ot run the following in the console: C:\siebelent\gtwysrvr\BIN\srvrmgr.exe - u - p SADMIN SADMIN - g siebelwin2k32-e SIEBELENT, I get this error: fatal error (3015667): the program variable 1% is not defined, existing...
  
  
  Thank you in advance for your help!
  
  MARIANA

  Mariana,

  Please confirm if you try to configure the siebel server in the same machine as the gateway server. If so try to use localhost instead of the hostname of the machine setting up Siebel server.

  I assume you are using windows 2003 as the operating system.

  Thank you

  Wilson